public boolean dispatchTouchEvent(MotionEvent event) {
//返回true,表示该View内部消化掉了所有事件。返回false，表示View内部只处理了ACTION_DOWN事件，事件继续传递，向上级View(ViewGroup)传递。

    if (mOnTouchListener != null && (mViewFlags & ENABLED_MASK) == ENABLED &&
            mOnTouchListener.onTouch(this, event)) {
  //此处的onTouch方式就是回调的我们注册OnTouchListener时重写的onTouch()方法
        return true;
    }
    return onTouchEvent(event);
}

　首先进行三个条件的判断：

（1）查看是否给button设置了OnTouchListener()事件；

（2）控件是否Enable；（控件默认都是enable的）

（3）button里面实现的OnTouchListener监听里的onTouch()方法是否返回true；

　如果条件都满足，则该事件被消耗掉，不再进入onTouchEvent中处理。否则将事件将交给onTouchEvent方法处理。

 public boolean onTouchEvent(MotionEvent event) {
    ...

   /＊ 当前onTouch的组件必须是可点击的比如Button，ImageButton等等，此处CLICKABLE为true，才会进入if方法，最后返回true。
 如果是ImageView、TexitView这些默认为不可点击的View,此处CLICKABLE为false，最后返回false。当然会有特殊情况，如果给这些View设置了onClick监听器，此处CLICKABLE也将为true　　＊／

    if (((viewFlags & CLICKABLE) == CLICKABLE ||  
            (viewFlags & LONG_CLICKABLE) == LONG_CLICKABLE)) {
        switch (event.getAction()) {
            case MotionEvent.ACTION_UP:
                ...
                            if (!post(mPerformClick)) {
                                performClick();// 实际就是回调了我们注册的OnClickListener中重新的onClick()方法
                            }
                 ...
                break;

            case MotionEvent.ACTION_DOWN:
               ...
                break;

            case MotionEvent.ACTION_CANCEL:
                ...
                break;

            case MotionEvent.ACTION_MOVE:
               ...
                break;
        }
        return true;
    }

    return false;
}

public boolean performClick() {
    ...
 ／／
    if (li != null && li.mOnClickListener != null) {
        ...
        li.mOnClickListener.onClick(this);
        return true;
    }

    return false;
}

 public void setOnClickListener(OnClickListener l) {
    if (!isClickable()) {
        setClickable(true);
    }
    getListenerInfo().mOnClickListener = l;
}

只有我们注册OnTouchListener时重写的 
onTouch()方法中

返回false —> 执行onTouchEvent方法 —> 导致onClick()回调方法执行　

返回true —> onTouchEvent方法不执行 —> 导致onClick()回调方法不会执行

４.ViewGroup源码分析

　　Android中诸如LinearLayout等的五大布局控件，都是继承自ViewGroup，而ViewGroup本身是继承自View，所以ViewGroup的事件处理机制对这些控件都有效。

　　 
部分源码：

public boolean dispatchTouchEvent(MotionEvent ev) {  
       final int action = ev.getAction();  
       final float xf = ev.getX();  
       final float yf = ev.getY();  
       final float scrolledXFloat = xf + mScrollX;  
       final float scrolledYFloat = yf + mScrollY;  
       final Rect frame = mTempRect;  

       //这个值默认是false, 然后我们可以通过requestDisallowInterceptTouchEvent(boolean disallowIntercept)方法  
       //来改变disallowIntercept的值  
       boolean disallowIntercept = (mGroupFlags & FLAG_DISALLOW_INTERCEPT) != 0;  

       //这里是ACTION_DOWN的处理逻辑  
       if (action == MotionEvent.ACTION_DOWN) {  
        //清除mMotionTarget, 每次ACTION_DOWN都很设置mMotionTarget为null  
           if (mMotionTarget != null) {  
               mMotionTarget = null;  
           }  

           //disallowIntercept默认是false, 就看ViewGroup的onInterceptTouchEvent()方法  
           if (disallowIntercept || !onInterceptTouchEvent(ev)) {  //第一点
               ev.setAction(MotionEvent.ACTION_DOWN);  
               final int scrolledXInt = (int) scrolledXFloat;  
               final int scrolledYInt = (int) scrolledYFloat;  
               final View[] children = mChildren;  
               final int count = mChildrenCount;  
               //遍历其子View  
               for (int i = count - 1; i >= 0; i--) {  //第二点
                   final View child = children[i];  

                   //如果该子View是VISIBLE或者该子View正在执行动画, 表示该View才  
                   //可以接受到Touch事件  
                   if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE  
                           || child.getAnimation() != null) {  
                    //获取子View的位置范围  
                       child.getHitRect(frame);  

                       //如Touch到屏幕上的点在该子View上面  
                       if (frame.contains(scrolledXInt, scrolledYInt)) {  
                           // offset the event to the view's coordinate system  
                           final float xc = scrolledXFloat - child.mLeft;  
                           final float yc = scrolledYFloat - child.mTop;  
                           ev.setLocation(xc, yc);  
                           child.mPrivateFlags &= ~CANCEL_NEXT_UP_EVENT;  

                           //调用该子View的dispatchTouchEvent()方法  
                           if (child.dispatchTouchEvent(ev))  {  
                               // 如果child.dispatchTouchEvent(ev)返回true表示  
                            //该事件被消费了，设置mMotionTarget为该子View  
                               mMotionTarget = child;  
                               //直接返回true  
                               return true;  
                           }  
                           // The event didn't get handled, try the next view.  
                           // Don't reset the event's location, it's not  
                           // necessary here.  
                       }  
                   }  
               }  
           }  
       }  

       //判断是否为ACTION_UP或者ACTION_CANCEL  
       boolean isUpOrCancel = (action == MotionEvent.ACTION_UP) ||  
               (action == MotionEvent.ACTION_CANCEL);  

       if (isUpOrCancel) {  
           //如果是ACTION_UP或者ACTION_CANCEL, 将disallowIntercept设置为默认的false  
        //假如我们调用了requestDisallowInterceptTouchEvent()方法来设置disallowIntercept为true  
        //当我们抬起手指或者取消Touch事件的时候要将disallowIntercept重置为false  
        //所以说上面的disallowIntercept默认在我们每次ACTION_DOWN的时候都是false  
           mGroupFlags &= ~FLAG_DISALLOW_INTERCEPT;  
       }  

       // The event wasn't an ACTION_DOWN, dispatch it to our target if  
       // we have one.  
       final View target = mMotionTarget;  
       //mMotionTarget为null意味着没有找到消费Touch事件的View, 所以我们需要调用ViewGroup父类的  
       //dispatchTouchEvent()方法，也就是View的dispatchTouchEvent()方法  
       if (target == null) {  
           // We don't have a target, this means we're handling the  
           // event as a regular view.  
           ev.setLocation(xf, yf);  
           if ((mPrivateFlags & CANCEL_NEXT_UP_EVENT) != 0) {  
               ev.setAction(MotionEvent.ACTION_CANCEL);  
               mPrivateFlags &= ~CANCEL_NEXT_UP_EVENT;  
           }  
           return super.dispatchTouchEvent(ev);  
       }  

       //这个if里面的代码ACTION_DOWN不会执行，只有ACTION_MOVE  
       //ACTION_UP才会走到这里, 假如在ACTION_MOVE或者ACTION_UP拦截的  
       //Touch事件, 将ACTION_CANCEL派发给target，然后直接返回true  
       //表示消费了此Touch事件  
       if (!disallowIntercept && onInterceptTouchEvent(ev)) {  
           final float xc = scrolledXFloat - (float) target.mLeft;  
           final float yc = scrolledYFloat - (float) target.mTop;  
           mPrivateFlags &= ~CANCEL_NEXT_UP_EVENT;  
           ev.setAction(MotionEvent.ACTION_CANCEL);  
           ev.setLocation(xc, yc);  

           if (!target.dispatchTouchEvent(ev)) {  
           }  
           // clear the target  
           mMotionTarget = null;  
           // Don't dispatch this event to our own view, because we already  
           // saw it when intercepting; we just want to give the following  
           // event to the normal onTouchEvent().  
           return true;  
       }  

       if (isUpOrCancel) {  
           mMotionTarget = null;  
       }  

       // finally offset the event to the target's coordinate system and  
       // dispatch the event.  
       final float xc = scrolledXFloat - (float) target.mLeft;  
       final float yc = scrolledYFloat - (float) target.mTop;  
       ev.setLocation(xc, yc);  

       if ((target.mPrivateFlags & CANCEL_NEXT_UP_EVENT) != 0) {  
           ev.setAction(MotionEvent.ACTION_CANCEL);  
           target.mPrivateFlags &= ~CANCEL_NEXT_UP_EVENT;  
           mMotionTarget = null;  
       }  

       //如果没有拦截ACTION_MOVE, ACTION_DOWN的话，直接将Touch事件派发给target  
       return target.dispatchTouchEvent(ev);  
   }