SCM加载驱动

SCM加载驱动
#include <windows.h> 
#include <winsvc.h> 
#include <conio.h> 
#include <stdio.h>
#define DRIVER_NAME "123467"
#define DRIVER_PATH "..\\HelloDDK.sys"
//装载NT驱动程序
BOOL LoadNTDriver(char* lpszDriverName,char* lpszDriverPath)
{
/************************ 加载NT驱动的代码*******************************
   ① 调用OpenSCManager,打开SCM管理器.如果返回NULL,则返回失败,否则继续
   ② 调用CreateService,创建服务,创建成功则转步骤 ⑥
      ③ 用GetLastError的得到错误返回值
   ④ 返回值为ERROR_IO_PENDING,说明服务已经创建过,用OpenService打开此服务.
   ⑤ 返回值为其他值, 创建武服务失败,返回失败.
   ⑥ 调用StartService开启服务
   ⑦ 成功返回
************************************************************************/
char szDriverImagePath[256];
//得到完整的驱动路径
GetFullPathName(lpszDriverPath, 256, szDriverImagePath, NULL);
BOOL bRet = FALSE;
SC_HANDLE hServiceMgr=NULL;// SCM管理器的句柄
SC_HANDLE hServiceDDK=NULL;// NT驱动程序的服务句柄

//打开服务控制管理器
hServiceMgr = OpenSCManager( NULL, NULL, SC_MANAGER_ALL_ACCESS );
if( hServiceMgr == NULL ) 
{
   // OpenSCManager失败
   printf( "OpenSCManager() Faild %d ! \n", GetLastError() );
   bRet = FALSE;
   goto BeforeLeave;
}
else
{
   // OpenSCManager成功
   printf( "OpenSCManager() ok ! \n" ); 
}

//创建驱动所对应的服务
hServiceDDK = CreateService( hServiceMgr,
   lpszDriverName,         // 驱动程序的在注册表中的名字 
   lpszDriverName,         // 注册表驱动程序的 DisplayName 值 
   SERVICE_ALL_ACCESS,     // 加载驱动程序的访问权限 
   SERVICE_KERNEL_DRIVER, // 表示加载的服务是驱动程序 
   SERVICE_DEMAND_START,   // 注册表驱动程序的 Start 值 
   SERVICE_ERROR_IGNORE,   // 注册表驱动程序的 ErrorControl 值 
   szDriverImagePath,      // 注册表驱动程序的 ImagePath 值 
   NULL, 
   NULL, 
   NULL, 
   NULL, 
   NULL);
DWORD dwRtn;
// 判断服务是否失败
if( hServiceDDK == NULL ) 
{ 
   dwRtn = GetLastError();
   if( dwRtn != ERROR_IO_PENDING && dwRtn != ERROR_SERVICE_EXISTS ) 
   { 
    //由于其他原因创建服务失败
    printf( "CrateService() Faild %d ! \n", dwRtn ); 
    bRet = FALSE;
    goto BeforeLeave;
   } 
   else 
   {
    //服务创建失败,是由于服务已经创立过
    printf( "CrateService() Faild Service is ERROR_IO_PENDING or ERROR_SERVICE_EXISTS! \n" ); 
   }
   // 驱动程序已经加载,只需要打开 
   hServiceDDK = OpenService( hServiceMgr, lpszDriverName, SERVICE_ALL_ACCESS ); 
   if( hServiceDDK == NULL ) 
   {
    // 如果打开服务也失败,则意味错误
    dwRtn = GetLastError(); 
    printf( "OpenService() Faild %d ! \n", dwRtn ); 
    bRet = FALSE;
    goto BeforeLeave;
   } 
   else 
   {
    printf( "OpenService() ok ! \n" );
   }
} 
else 
{
   printf( "CrateService() ok ! \n" );
}
// 开启此项服务
bRet= StartService( hServiceDDK, NULL, NULL ); 
if( !bRet ) 
{ 
   DWORD dwRtn = GetLastError(); 
   if( dwRtn != ERROR_IO_PENDING && dwRtn != ERROR_SERVICE_ALREADY_RUNNING ) 
   { 
    printf( "StartService() Faild %d ! \n", dwRtn ); 
    bRet = FALSE;
    goto BeforeLeave;
   } 
   else 
   { 
    if( dwRtn == ERROR_IO_PENDING ) 
    { 
     // 设备被挂住
     printf( "StartService() Faild ERROR_IO_PENDING ! \n");
     bRet = FALSE;
     goto BeforeLeave;
    } 
    else 
    { 
     // 服务已经开启
     printf( "StartService() Faild ERROR_SERVICE_ALREADY_RUNNING ! \n");
     bRet = TRUE;
     goto BeforeLeave;
    } 
   } 
}
bRet = TRUE;
// 离开前关闭句柄
BeforeLeave:
if(hServiceDDK)
{
   CloseServiceHandle(hServiceDDK); // 服务句柄
}
if(hServiceMgr)
{
   CloseServiceHandle(hServiceMgr); // SCM句柄
}
return bRet;
}
// 卸载驱动程序 
BOOL UnloadNTDriver( char * szSvrName ) 
{
/************************* 卸载NT驱动的代码******************************
   ① 调用OpenSCManager,打开SCM管理器,如果返回NULL,则返回失败,否则继续.
   ② 调用OpenService.如果返回NULL,则返回失败,否则继续
   ③ 调用DeleteService卸载此项服务.
   ④ 成功返回.
************************************************************************/
BOOL bRet = FALSE;
SC_HANDLE hServiceMgr=NULL;// SCM管理器的句柄
SC_HANDLE hServiceDDK=NULL;// NT驱动程序的服务句柄
SERVICE_STATUS SvrSta;
// 打开SCM管理器
hServiceMgr = OpenSCManager( NULL, NULL, SC_MANAGER_ALL_ACCESS ); 
if( hServiceMgr == NULL ) 
{
   // 打开SCM管理器失败
   printf( "OpenSCManager() Faild %d ! \n", GetLastError() ); 
   bRet = FALSE;
   goto BeforeLeave;
} 
else 
{
   // 打开SCM管理器失败成功
   printf( "OpenSCManager() ok ! \n" ); 
}
// 打开驱动所对应的服务
hServiceDDK = OpenService( hServiceMgr, szSvrName, SERVICE_ALL_ACCESS );
if( hServiceDDK == NULL ) 
{
   // 打开驱动所对应的服务失败
   printf( "OpenService() Faild %d ! \n", GetLastError() ); 
   bRet = FALSE;
   goto BeforeLeave;
} 
else 
{ 
   printf( "OpenService() ok ! \n" ); 
}
// 停止驱动程序,如果停止失败,只有重新启动才能,再动态加载。 
if( !ControlService( hServiceDDK, SERVICE_CONTROL_STOP , &SvrSta ) ) 
{ 
   printf( "ControlService() Faild %d !\n", GetLastError() ); 
} 
else 
{
   // 打开驱动所对应的失败
   printf( "ControlService() ok !\n" ); 
} 
// 动态卸载驱动程序。 
if( !DeleteService( hServiceDDK ) ) 
{
   // 卸载失败
   printf( "DeleteSrevice() Faild %d !\n", GetLastError() ); 
} 
else 
{ 
   // 卸载成功
   printf( "DelServer:eleteSrevice() ok !\n" ); 
} 
bRet = TRUE;
BeforeLeave:
// 离开前关闭打开的句柄
if(hServiceDDK)
{
   CloseServiceHandle(hServiceDDK); // 服务句柄
}
if(hServiceMgr)
{
   CloseServiceHandle(hServiceMgr); // SCM 句柄
}
return bRet; 
}
void TestDriver()
{
// 测试驱动程序 
HANDLE hDevice = CreateFile("\\\\.\\HelloDDK", 
   GENERIC_WRITE | GENERIC_READ, 
   0, 
   NULL, 
   OPEN_EXISTING, 
   0, 
   NULL); 
if( hDevice != INVALID_HANDLE_VALUE ) 
{
   MessageBox(NULL,"SUCESSFULLY....ComeOn...","Yes",0);
   printf( "Create Device ok ! \n" ); 
}
else 
{
   printf( "Create Device faild %d ! \n", GetLastError() ); 
   MessageBox(NULL,"Faild...Fuckking...","No",0);
}
CloseHandle( hDevice );
}
int main(int argc, char* argv[]) 
{  
UnloadNTDriver(DRIVER_NAME);
// 加载驱动
BOOL bRet = LoadNTDriver(DRIVER_NAME,DRIVER_PATH);
if (!bRet)
{
   printf("LoadNTDriver error\n");
   return 0;
}
// 加载成功
printf( "press any to create device!\n" ); 
getch();
TestDriver();
// 这时候你可以通过注册表,或其他查看符号连接的软件验证。 
printf( "press any to unload the driver!\n" ); 
getch();
// 卸载驱动
UnloadNTDriver(DRIVER_NAME);
// if (!bRet)
// {
//   printf("UnloadNTDriver error\n");
//   return 0;
// }
system("pause");
return 0; 
}
SCM加载驱动

SCM加载驱动

上一篇:安装3dmax出现错误怎么办?3dmax出现错误解决办法


下一篇:Photoshop打造光滑的巧克力立体心形