用双引号定义并且声明的时候明确指定数组大小的话，sizeof就会返回指定的大小，不会自动加1；
char str2[10] = "hello c";
printf("strlen = %ld\n", strlen(str2));
printf("sizeof = %ld\n", sizeof(str2));
//strlen = 7
//sizeof = 10
用大括号定义并且声明的时候明确指定数组大小的话，sizeof就会返回指定的大小，不会自动加1；
char str5[10] = {'h','e','l','l','o',' ','C'};
printf("strlen = %ld\n", strlen(str5));
printf("sizeof = %ld\n", sizeof(str5));
//strlen = 7
//sizeof = 10
用双引号定义并且声明的时候没有明确指定数组大小的话，sizeof就会是实际的大小+1；strlen也正常
char str1[] = "hello c";
printf("strlen = %ld\n", strlen(str1));
printf("sizeof = %ld\n", sizeof(str1));
//strlen = 7
//sizeof = 8
用大括号定义并且声明的时候没有明确指定数组大小的话，sizeof就会是实际的大小(不加1）；但是strlen就变得诡异了,而且每次执行的结果的不一样
char str4[] = {'h','e','l','l','o',' ','C'};
printf("strlen = %ld\n", strlen(str4));
printf("sizeof = %ld\n", sizeof(str4));
//strlen = 14
//sizeof = 7
用双引号定义并且声明的时候明确指定数组大小，比实际的小的话，sizeof就会返回指定的大小，不会自动加1；但是strlen就变得诡异了,而且每次执行的结果的不一样
char str3[5] = "hello c";
printf("strlen = %ld\n", strlen(str3));
printf("sizeof = %ld\n", sizeof(str3));
//strlen = 12 strlen就变得诡异了,而且每次执行的结果的不一样
//sizeof = 5
char cr[] = {'a','b','\0','c',};
char cr1[] = {'a','b',0,'c',};
printf("cr strlen = %ld\n", strlen(cr));
printf("cr1 strlen = %ld\n", strlen(cr1));
printf("cr sizeof = %ld\n", sizeof(cr));
//cr strlen = 2
//cr1 strlen = 2
//cr sizeof = 4
通过以上的代码可以得出以下结论
- strlen的原理是一直计数，直到遇到'\0'为止
- 用双引号定义时，会在最后自动加上'\0'
- 用大括号定义时，不会在最后自动加上'\0'
- 用大括号定义时，如果声明的数量大于大括号里的数量，会在最后用'\0'填补缺失的位数
- '\0' = 0
全局变量存放在静态区，静态区的初始值都是'\0'，所以strlen(str6)为0
char str6[10];
int main(){
printf("strlen = %ld\n", strlen(str6));
printf("sizeof = %ld\n", sizeof(str6));
}
//strlen = 0
//sizeof = 10
局部变量存放在栈区，栈区的初始值都是随机的，所以strlen(str6)为随机值
char str7[10];
printf("strlen = %ld\n", strlen(str7));
printf("sizeof = %ld\n", sizeof(str7));
//strlen = 12(随机值)
//sizeof = 10
以指针形式定义的话，sizeof返回的永远是指针的大小
char *p = "hello C";
printf("strlen = %ld\n", strlen(p));
printf("sizeof = %ld\n", sizeof(p));
//strlen = 7
//sizeof = 8
char *p1[3] = {"hello C","abcd","12345"};
printf("p1 strlen = %ld\n", strlen(*p1));//7
printf("p1 strlen = %ld\n", strlen(*(p1+1)));//4
printf("p1 strlen = %ld\n", strlen(*(p1+2)));//5
printf("p1 sizeof = %ld\n", sizeof(p1));//24 因为p1不是指针，p1是指针数组，数组里有3个指针所以3 * 8 = 24
char (*p2)[3000];
printf("p2 sizeof = %ld\n", sizeof(p2));//8 因为p2是数组指针，所以不管数组大小是多少，值都是8
函数的参数是数组时，有个经典的骗局，虽然fun函数的参数是数组，但是c语言不会在复制一个数组给形参，它会实际传递的是数组的首地址。
#include <stdio.h>
#include <string.h>
void fun(char str[]){//等同于void fun(char* str)，所以sizeof（str）的值为8
printf("strlen = %ld\n", strlen(str));
printf("sizeof = %ld\n", sizeof(str));
}
int main(){
char str[10] = "Hello C";
printf("strlen = %ld\n", strlen(str));
printf("sizeof = %ld\n", sizeof(str));
printf("-------------------------------------\n");
fun(str);
}
执行结果：
strlen = 7
sizeof = 10
-------------------------------------
strlen = 7
sizeof = 8