#include <xc.h>

#include <sys/attribs.h>

#pragma config FMIIEN = ON // Ethernet RMII/MII Enable (MII Enabled) // need a 25MHz XTAL in MII mode, a 50MHz Clock in RMII mode.

#pragma config FETHIO = ON // Ethernet I/O Pin Select (Default Ethernet I/O)

#pragma config PGL1WAY = ON // Permission Group Lock One Way Configuration (Allow only one reconfiguration)

#pragma config PMDL1WAY = ON // Peripheral Module Disable Configuration (Allow only one reconfiguration)

#pragma config IOL1WAY = ON // Peripheral Pin Select Configuration (Allow only one reconfiguration)

#pragma config FUSBIDIO = OFF // USB USBID Selection (Controlled by Port Function)

// DEVCFG2　　7FF9B11A

#pragma config FPLLIDIV = DIV_3 // System PLL Input Divider (3x Divider)

#pragma config FPLLRNG = RANGE_5_10_MHZ // System PLL Input Range (5-10 MHz Input)

#pragma config FPLLICLK = PLL_POSC // System PLL Input Clock Selection (POSC is input to the System PLL)

#pragma config FPLLMULT = MUL_50 // System PLL Multiplier (PLL Multiply by 50)  //PLL must output between 350 and 700 MHz

#pragma config FPLLODIV = DIV_2 // System PLL Output Clock Divider (2x Divider)

#pragma config UPLLFSEL = FREQ_24MHZ // USB PLL Input Frequency Selection (USB PLL input is 24 MHz)

#pragma config UPLLEN = OFF // USB PLL Enable (USB PLL is disabled)

// DEVCFG1　　7F653839

#pragma config FNOSC = SPLL // Oscillator Selection Bits (System PLL)

#pragma config DMTINTV = WIN_127_128 // DMT Count Window Interval (Window/Interval value is 127/128 counter value)

#pragma config FSOSCEN = OFF // Secondary Oscillator Enable (Disable SOSC)

#pragma config IESO = OFF // Internal/External Switch Over (Disabled)

#pragma config POSCMOD = EC // Primary Oscillator Configuration (External clock mode)

#pragma config OSCIOFNC = ON // CLKO Output Signal Active on the OSCO Pin (Enabled)

#pragma config FCKSM = CSDCMD // Clock Switching and Monitor Selection (Clock Switch Disabled, FSCM Disabled)

#pragma config WDTPS = PS32 // Watchdog Timer Postscaler (1:32)

#pragma config WDTSPGM = STOP // Watchdog Timer Stop During Flash Programming (WDT stops during Flash programming)

#pragma config WINDIS = NORMAL // Watchdog Timer Window Mode (Watchdog Timer is in non-Window mode)

#pragma config FWDTEN = OFF // Watchdog Timer Enable (WDT Disabled)

#pragma config FWDTWINSZ = WINSZ_25 // Watchdog Timer Window Size (Window size is 25%)

#pragma config DMTCNT = DMT31 // Deadman Timer Count Selection (2^31 (2147483648))

#pragma config FDMTEN = OFF // Deadman Timer Enable (Deadman Timer is disabled)

// DEVCFG0　　FFFFFFF7

#pragma config DEBUG = OFF // Background Debugger Enable (Debugger is disabled)

#pragma config JTAGEN = ON // JTAG Enable (JTAG Port Enabled)

#pragma config ICESEL = ICS_PGx2 // ICE/ICD Comm Channel Select (Communicate on PGEC2/PGED2)

#pragma config TRCEN = ON // Trace Enable (Trace features in the CPU are enabled)

#pragma config BOOTISA = MIPS32 // Boot ISA Selection (Boot code and Exception code is MIPS32)

#pragma config FECCCON = OFF_UNLOCKED // Dynamic Flash ECC Configuration (ECC and Dynamic ECC are disabled (ECCCON bits are writable))

#pragma config FSLEEP = OFF // Flash Sleep Mode (Flash is powered down when the device is in Sleep mode)

#pragma config DBGPER = ALLOW_PG2 // Debug Mode CPU Access Permission (Allow CPU access to Permission Group 2 permission regions)

#pragma config EJTAGBEN = NORMAL // EJTAG Boot (Normal EJTAG functionality)

// DEVCP0

#pragma config CP = OFF // Code Protect (Protection Disabled)

#define Sys_Conf()          PRECON = 0x12  

#define LED_IOCTL()       TRISHCLR = (1<<0)

#define LED_SETON()       LATHSET = (1<<0)

#define LED_SETOFF()      LATHCLR = (1<<0)

#define LED_ONOFF()       LATHINV = (1<<0)

#define LED_OPEN()        ANSELH &= 0xFFFFFFFE

typedef enum _LED_STATE_t {

        /* Describe structure member. */

        OFF = 0,

        /* Describe structure member. */

        ON = 1

    } LED_STATE_t;

LED_STATE_t PreLedState, LedState;

#define DEBOUNCE_Input          (PORTB & 0x4000)

#define DEBOUNCE_Open()         ANSELB = 0xFFFFBFFF

#define DEBOUNCE_IOCtl()        CNPUBSET = 0x4000

#define DEBOUNCE_Output         LedState

#define DEBOUNCE_ThreholdLow    0

#define DEBOUNCE_ThreholdHigh   100

volatile unsigned char DEBOUNCE_EventStart;

    //volatile unsigned char DEBOUNCE_TimeFlag;

    unsigned long DEBOUNCE_PreInput;

    unsigned int DEBOUNCE_Integrator;

    void Key_Init(void)

    {

        DEBOUNCE_EventStart = ;

        DEBOUNCE_Integrator = DEBOUNCE_ThreholdHigh / ;

        //DEBOUNCE_TimeFlag = 0;

        DEBOUNCE_Open();

        DEBOUNCE_IOCtl();

        DEBOUNCE_PreInput = DEBOUNCE_Input;

        //Pps_UnLock();

        INT1R = 0x2;

        //Pps_Lock();

        INTCONCLR = 0x2;

        IPC2SET = 0x10;

        IFS0CLR = 0x100;

        IEC0SET = 0x100;

        //CNENBSET = 0x1000;

        //IPC29SET = 0x12000000;

        //IFS3CLR = 0x800000;

        //IEC3SET = 0x800000;

        //CNCONBSET = 0x8000;

    }

    //void Key_Scheduler(void)

    void Key_Debounce(void)

    {

        //if (DEBOUNCE_TimeFlag)

        //{

            if (DEBOUNCE_EventStart)

            {

                if (DEBOUNCE_Input == )

                {

                    if (DEBOUNCE_Integrator-- == DEBOUNCE_ThreholdLow)

                    {

                        DEBOUNCE_Output = ;

                        DEBOUNCE_PreInput = DEBOUNCE_Input;

                        DEBOUNCE_EventStart = ;

                        DEBOUNCE_Integrator = DEBOUNCE_ThreholdHigh / ;

                    }

                }

                else                   //if (DEBOUNCE_Input == 1)

                {

                    if (DEBOUNCE_Integrator++ == DEBOUNCE_ThreholdHigh)

                    {

                        DEBOUNCE_Output = ;

                        DEBOUNCE_PreInput = DEBOUNCE_Input;

                        DEBOUNCE_EventStart = ;

                        DEBOUNCE_Integrator = DEBOUNCE_ThreholdHigh / ;

                    }

                }

            }

            //else if (DEBOUNCE_PreInput != DEBOUNCE_Input)

            //{

               // DEBOUNCE_EventStart = 1;

            //}

            //DEBOUNCE_TimeFlag = 0;

        //}

    }

void Led_Init(void)

{

    LED_OPEN();

    LED_IOCTL();

    LED_SETON();

    LedState = ON;

    PreLedState = LedState;

}

void Tmr1_Init(void)

{

    T1CON = 0x8010;

    PR1 = 0x30D3;

    IPC1SET = 0x5;

    TMR1 = ;

    IEC0SET = 0x10;

    IFS0CLR = 0x10;

}

void Tmr1_Write(unsigned int value)

{

    TMR1 = value & 0xFFFF;

}

void __ISR(_EXTERNAL_1_VECTOR,ipl4AUTO) Ext1_Handler(void)

{

    if ((INTCON & 0x2) == )

    {

        INTCONSET = 0x2;

    }

    else

    {

        INTCONCLR = 0x2;

    }

    DEBOUNCE_EventStart = ;

    IFS0CLR = 0x100; // Clear flag

 }

void __ISR(_TIMER_1_VECTOR,ipl1AUTO) Timer1_Handler(void)

{

    //DEBOUNCE_TimeFlag = 1;

    Key_Debounce();

    Tmr1_Write();

    IFS0CLR = 0x10; // Clear flag

 }

void main(void)

{

    Sys_Conf();

    //Wdt_Init();

    Led_Init();

    Key_Init();

    Tmr1_Init();

    Mvec_Interrupt();

    while ()

    {

        //Wdt_Refresh();

        //Key_Scheduler();

        Led_Scheduler();

    }

}