eNSP-VLAN 划分 --access端口和trunk端口实验
交换机1配置
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname sw1
[sw1]vlan batch 10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]interface GigabitEthernet 0/0/1
[sw1-GigabitEthernet0/0/1]port link-type access
[sw1-GigabitEthernet0/0/1]port default vlan 10
[sw1]interface GigabitEthernet 0/0/2
[sw1-GigabitEthernet0/0/2]port link-type access
[sw1-GigabitEthernet0/0/2]port default vlan 20
[sw1]interface GigabitEthernet 0/0/3
[sw1-GigabitEthernet0/0/3]port link-type trunk
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10 20
[sw1]display vlan
The total number of vlans is : 3
---------------------------------------------------------------------
U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;
---------------------------------------------------------------------
VID Type Ports
---------------------------------------------------------------------
1 common UT:GE0/0/3(U) GE0/0/4(D) GE0/0/5(D) GE0/0/6(D)
GE0/0/7(D) GE0/0/8(D) GE0/0/9(D) GE0/0/10(D)
GE0/0/11(D) GE0/0/12(D) GE0/0/13(D) GE0/0/14(D)
GE0/0/15(D) GE0/0/16(D) GE0/0/17(D) GE0/0/18(D)
GE0/0/19(D) GE0/0/20(D) GE0/0/21(D) GE0/0/22(D)
GE0/0/23(D) GE0/0/24(D)
10 common UT:GE0/0/1(D)
TG:GE0/0/3(U)
20 common UT:GE0/0/2(D)
TG:GE0/0/3(U)
VID Status Property MAC-LRN Statistics Description
---------------------------------------------------------------------
1 enable default enable disable VLAN 0001
10 enable default enable disable VLAN 0010
20 enable default enable disable VLAN 0020
[sw1]display port vlan active
T=TAG U=UNTAG
---------------------------------------------------------------------
Port Link Type PVID VLAN List
---------------------------------------------------------------------
GE0/0/1 access 10 U: 10
GE0/0/2 access 20 U: 20
GE0/0/3 trunk 1 U: 1
T: 10 20
GE0/0/4 hybrid 1 U: 1
交换机2配置
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname sw2
[sw2]vlan batch 10 20
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]interface GigabitEthernet 0/0/1
[sw2-GigabitEthernet0/0/1]port link-type trunk
[sw2-GigabitEthernet0/0/1]port trunk allow-pass 10 20
[sw2]interface GigabitEthernet 0/0/2
[sw2-GigabitEthernet0/0/2]port link-type access
[sw2-GigabitEthernet0/0/2]port default vlan 20
[sw2]interface GigabitEthernet 0/0/3
[sw2-GigabitEthernet0/0/3]port link-type access
[sw2-GigabitEthernet0/0/3]port default vlan 10
[sw2]dis port vlan active
T=TAG U=UNTAG
---------------------------------------------------------------------
Port Link Type PVID VLAN List
---------------------------------------------------------------------
GE0/0/1 trunk 1 U: 1
T: 10 20
GE0/0/2 access 20 U: 20
GE0/0/3 access 10 U: 10
PC3 ping PC5的ip可以ping通
PC3的基础配置，注意要配置网关（同理PC5也要配置网关）