转发注明出处:http://www.cnblogs.com/0zcl/p/6352278.html
今天做了一个很简单的小项目，感受到了paramiko模块的强大，也深感自己Linux的功力不行~~
一、需求
二、简单需求分析及流程图
需求很少，我就简单地说下:
1. 主机分组可以配置文件实现(我用字典存数据的).
2. 登陆功能不做。选择分组后可查看组内对应主机的主机名和IP地址.
3. >>>cmd: df(输入命令则起多个线程(视组内有多少个主机而定)同时执行)
输出:
－－－－－－－－－－－－－h1－－－－－－－－－－－－
……(命令返回的数据)
－－－－－－－－－－－－－h2－－－－－－－－－－－－
……
>>>put test.yy(本地文件) filename (把本地的test.yy文件传到远程主机的/root目录下)
4.可写在配置文件中。包括远程主机的: 主机名 IP 用户名 密码 端口
流程图
我做的流程图https://www.processon.com/diagraming/588a1219e4b087b11659068b
三、目录结构及源代码
目录结构:
from_windows.py(待上传的文件)
main.py(批量主机管理接口)
"""批量主机管理接口""" import core if __name__ == "__main__":
core.run()
core.py(核心代码，被接口调用)
"""核心代码"""
import settings
import paramiko
import threading
import os class REMOTE_HOST(object):
#远程操作主机
def __init__(self, host, port ,username, password, cmd):
self.host = host
self.port = port
self.username = username
self.password = password
self.cmd = cmd def run(self):
"""起线程连接远程主机后调用"""
cmd_str = self.cmd.split()[0]
if hasattr(self, cmd_str): #反射 eg:调用put方法
getattr(self, cmd_str)()
else:
#setattr(x,'y',v)is equivalent to ``x.y=v''
setattr(self, cmd_str, self.command)
getattr(self, cmd_str)() #调用command方法，执行批量命令处理 def command(self):
"""批量命令处理"""
ssh = paramiko.SSHClient() #创建ssh对象
#允许连接不在know_hosts文件中的主机
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
ssh.connect(hostname=self.host,port=self.port,username=self.username,password=self.password)
stdin,stdout,stderr = ssh.exec_command(self.cmd)
result = stdout.read()
print("%s".center(50, "-") % self.host)
print(result.decode())
ssh.close() def put(self):
"""上传文件"""
filename = self.cmd.split()[1] #要上传的文件
transport = paramiko.Transport((self.host, self.port))
transport.connect(username=self.username, password=self.password)
sftp = paramiko.SFTPClient.from_transport(transport)
sftp.put(filename, filename)
print("put sucesss") transport.close() def show_host_list():
"""通过选择分组显示主机名与IP"""
for index, key in enumerate(settings.msg_dic):
print(index + 1, key, len(settings.msg_dic[key]))
while True:
choose_host_list = input(">>>(eg:group1)").strip()
host_dic = settings.msg_dic.get(choose_host_list)
if host_dic:
#print(host_dic)
for key in host_dic:
print(key, host_dic[key]["IP"])
return host_dic
else:
print("NO exit this group!") def interactive(choose_host_list):
"""根据选择的分组主机起多个线程进行批量交互"""
thread_list = []
while True:
cmd = input(">>>").strip()
if cmd:
for key in choose_host_list:
host, port, username, password = choose_host_list[key]["IP"], choose_host_list[key]["port"], \
choose_host_list[key]["username"], choose_host_list[key]["password"]
func = REMOTE_HOST(host, port, username, password, cmd) # 实例化类
t = threading.Thread(target=func.run) # 起线程
t.start()
thread_list.append(t)
for t in thread_list:
t.join() # 主线程等待子线程执行完毕
else:
continue def run():
choose_host_list = show_host_list()
interactive(choose_host_list)
settings.py(配置文件)
"""配置文件"""
msg_dic = {
"group1":{ #分组1
"h1":{"IP":"192.168.1.1", "username":"", "password":"aa", "port":22},
"h2":{"IP":"192.168.1.2", "username":"", "password":"bb", "port":22},
"h3":{"IP":"192.168.1.3", "username":"", "password":"cc", "port":22},
"h4":{"IP":"192.168.1.4", "username":"", "password":"dd", "port":22},
"h5":{"IP":"192.168.1.5", "username":"", "password":"ee", "port":22},
"h6":{"IP":"192.168.1.6", "username":"", "password":"ff", "port":22},
},
"group2":{ #分组2
"h1":{"IP":"192.168.2.1", "username":"", "password":"aaa", "port":22},
"h2":{"IP":"192.168.2.2", "username":"", "password":"bbb", "port":22},
"h3":{"IP":"192.168.2.3", "username":"", "password":"ccc", "port":22},
"h4":{"IP":"192.168.2.4", "username":"", "password":"ddd", "port":22},
"h5":{"IP":"192.168.2.5", "username":"", "password":"eee", "port":22},
"h6":{"IP":"192.168.2.6", "username":"", "password":"fff", "port":22},
"h7":{"IP":"192.168.2.7", "username":"", "password":"ggg", "port":22},
"h8":{"IP":"192.168.2.8", "username":"", "password":"hhh", "port":22},
},
"group3":{
"h1":{"IP":"192.168.179.133", "username":"root", "password":"zcl", "port":22},
}
}
测试:
硬件限制，我只用连接一台虚拟机测试~
C:\Python34\python3.exe C:/Users/Administrator/PycharmProjects/laonanhai/host_manage/main.py
1 group1 6
2 group3 1
3 group2 8
>>>(eg:group1)group3
h1 192.168.179.133
>>>put from_windows.py
put sucesss
>>>
>>>ls
------------------------192.168.179.133------------------------
anaconda-ks.cfg
database_test
from_windows.py
install.log
install.log.syslog
m
oot
\root
tmp\from_windows.py >>>
上传前没有from_windows.py文件，上传后就有了!
PS:关于paramiko模块可以看看这篇博客http://www.cnblogs.com/starof/p/4670433.html