CREATE  PROCEDURE  Get_JobList
as    
--  created by geton on 2014-08-16    
declare @jobnamecc  varchar(250)    
declare @strsql  varchar(5000)    
declare @jobname varchar(30),@category_calss_i int,@category_calss varchar(50),@category_name varchar(50),
        @category_type varchar(30),@category_id int,@category_type_i int    
    
    
declare joblist cursor for 
select [name]  from     msdb.dbo.sysjobs --where name=‘HR - AUTO GET COE‘ 

open joblist
    fetch next from joblist into @jobnamecc  
    while @@fetch_status=0    
       begin    
          begin try   
            select @jobname =@jobnamecc ,@category_calss = ‘‘,@category_name=‘‘,@category_type = ‘‘    
    
                select 
                @category_calss = case when tshc.category_class = 1 then ‘JOB‘    
                                       when tshc.category_class = 2 then ‘ALERT‘    
                                       else ‘OPERATOR‘    
                                       end,
                @category_type = case when tshc.category_type = 1 then ‘LOCAL‘    
                                      when tshc.category_type = 2 then ‘MULTI-SERVER‘    
                                      else ‘NONE‘    
                                      end,     
                @category_name = tshc.name,    
                @category_type_i = category_type,    
                @category_calss_i = tshc.category_class,    
                @category_id = tshc.category_id    
                from    
                msdb.dbo.sysjobs_view as sv    -- Here "msdb.dbo.sysjobs_view" should be changed to the DB which you restored
                INNER JOIN msdb.dbo.syscategories  as tshc on sv.category_id = tshc.category_id  
                where    -- Here "msdb.dbo.syscategories" should be changed to the DB which you restored 
                (sv.name=@jobname AND tshc.category_class = 1)   --  category_class = 1 -- only job type are exported
    
    PRINT ‘BEGIN TRANSACTION‘    
    PRINT ‘DECLARE @ReturnCode INT‘   
    PRINT ‘SELECT @ReturnCode = 0‘  
    PRINT ‘IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N‘‘‘ + @category_name +‘‘‘AND category_class=‘ +rtrim(@category_calss_i)+‘)‘    
    PRINT ‘BEGIN‘    
    PRINT ‘EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N‘‘‘+ @category_calss+‘‘‘, @type=N‘‘‘+@category_type+‘‘‘, @name=N‘‘‘+@category_name+‘‘‘‘    
    PRINT ‘IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback‘    
    PRINT ‘end‘    
    
    declare @eventloglevel int,@emaillevel int,@netsendlevel int,@pagelevel int    
    declare @emailleveloprid nvarchar(256),@netsendleveloprid nvarchar(256),@pageleveloprid nvarchar(256)    
    declare @isenable int , @description nvarchar(1024),@owner_log_name nvarchar(512),@delete_level int    
    declare @jobid uniqueidentifier,@start_step_id int,@server nvarchar(512)    
    select    
    @eventloglevel=sv.notify_level_eventlog,    
    @emaillevel=sv.notify_level_email ,    
    @netsendlevel=sv.notify_level_netsend,     
    @pagelevel=sv.notify_level_page,     
    @emailleveloprid = isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_email_operator_id),‘‘),    
    @netsendleveloprid  =  isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_netsend_operator_id),‘‘),    
    @pageleveloprid = isnull((select top 1 name from   msdb..sysoperators where id = sv.notify_page_operator_id),‘‘) ,   
    @isenable = sv.enabled ,   
    @description = sv.description ,   
    @owner_log_name = isnull(suser_sname(sv.owner_sid), N‘‘‘‘),  
    @delete_level = sv.delete_level,    
    @jobid = sv.job_id,    
    @start_step_id = start_step_id ,   
    @server = ‘(local)‘--originating_server  --Due to this script would be executed on target machine,Here change the @server parameter to "LOCAL" 
    from msdb.dbo.sysjobs_view as sv    
    where (sv.name=@jobname )    
    
    --  select * from msdb.dbo.sysjobs_view
    PRINT ‘DECLARE @jobId BINARY(16)‘    
    PRINT ‘EXEC @ReturnCode =  msdb.dbo.sp_add_job @job_name=N‘‘‘+@jobname+‘‘‘,‘    
    PRINT ‘ @enabled=‘+RTRIM(@isenable)+‘, ‘    
    PRINT ‘ @notify_level_eventlog=‘+RTRIM(@eventloglevel)+‘, ‘    
    PRINT ‘ @notify_level_email=‘+RTRIM(@emaillevel)+‘, ‘    
    PRINT ‘ @notify_level_netsend=‘+RTRIM(@netsendlevel)+‘, ‘    
    PRINT ‘ @notify_level_page=‘+RTRIM(@pagelevel)+‘, ‘    
    PRINT ‘ @notify_email_operator_name =‘‘‘+RTRIM(@emailleveloprid)+‘‘‘, ‘    
    PRINT ‘ @notify_netsend_operator_name=‘‘‘+RTRIM(@netsendleveloprid)+‘‘‘, ‘    
    PRINT ‘ @notify_page_operator_name=‘‘‘+RTRIM(@pageleveloprid)+‘‘‘, ‘    
    PRINT ‘ @delete_level=‘+RTRIM(@delete_level)+‘, ‘    
    PRINT ‘ @description=N‘‘‘+@description+‘‘‘, ‘    
    PRINT ‘ @category_name=N‘‘‘+@category_name+‘‘‘, ‘    
    PRINT ‘ @owner_login_name=N‘‘‘+@owner_log_name+‘‘‘, ‘    
    PRINT ‘ @job_id = @jobId OUTPUT‘    
    PRINT ‘IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback‘    
     --SELECT * FROM msdb.dbo.syscategories    


 

    declare @step_id int    
    declare @step_name nvarchar(512) ,@cmdexec_success_code int,@on_success_action int,@on_success_step_id int,   
            @on_fail_action int,@on_fail_step_id int,@retry_attempts int,@retry_interval int,@os_run_priority int,    
            @subsystem nvarchar(512),@database_name nvarchar(512),@flags int,@command nvarchar(max)    
    
    declare jbcur cursor  for  
    select step_id  from msdb..sysjobsteps  where job_id = @jobid order by step_id ;  
    --  "msdb..sysjobsteps"  should be changed to the DB which you restored
    open jbcur;    
    fetch next from jbcur into @step_id    
    while @@fetch_status = 0    
    begin    
           
       SELECT 
       @step_name = step_name,    
       @cmdexec_success_code= cmdexec_success_code ,   
       @on_success_action = on_success_action ,
       @on_success_step_id = on_success_step_id  ,  
       @on_fail_action = on_fail_action,    
       @on_fail_step_id = on_fail_step_id ,   
       @retry_attempts = retry_attempts,    
       @retry_interval = retry_interval,    
       @os_run_priority = os_run_priority,    
       @subsystem = subsystem,    
       @database_name = database_name,    
       @command = command,    
       @flags = flags    
     FROM  msdb..sysjobsteps a WHERE job_id = @jobid and step_id  = @step_id    
           
     PRINT ‘ EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, ‘    
     PRINT ‘ @step_name=N‘‘‘+@step_name+‘‘‘, ‘    
     PRINT ‘ @step_id=‘+RTRIM(@step_id)+‘, ‘    
     PRINT ‘ @cmdexec_success_code=‘+RTRIM(@cmdexec_success_code)+‘, ‘    
     PRINT ‘ @on_success_action=‘+RTRIM(@on_success_action)+‘, ‘    
     PRINT ‘ @on_success_step_id=‘+RTRIM(@on_success_step_id)+‘, ‘    
     PRINT ‘ @on_fail_action=‘+RTRIM(@on_fail_action)+‘, ‘    
     PRINT ‘ @on_fail_step_id=‘+RTRIM(@on_fail_step_id)+‘, ‘    
     PRINT ‘ @retry_attempts=‘+RTRIM(@retry_attempts)+‘, ‘    
     PRINT ‘ @retry_interval=‘+RTRIM(@retry_interval)+‘, ‘    
     PRINT ‘ @os_run_priority=‘+RTRIM(@os_run_priority)+‘, @subsystem=N‘‘‘+@subsystem+‘‘‘, ‘    
     PRINT ‘ @database_name=N‘‘‘+@database_name+‘‘‘,‘    
     PRINT ‘ @flags=‘+RTRIM(@flags)+‘ ,‘    
     PRINT ‘ @command=N‘‘‘+REPLACE(@command,‘‘‘‘,‘‘‘‘‘‘)+‘‘‘‘    
     PRINT ‘ IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback‘    
    
    fetch next from jbcur into @step_id    
    
    end    
    
    close jbcur    
    deallocate jbcur    
           
    PRINT ‘    EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = ‘+rtrim(@start_step_id)    
    PRINT ‘    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback    ‘    
    
    DECLARE @enabled INT,@freq_type INT,@freq_interval INT,@freq_subday_type INT,@freq_subday_interval INT    
     ,@freq_relative_interval INT,@freq_recurrence_factor INT,@active_start_date INT,@active_end_date INT    
     ,@active_start_time INT,@active_end_time INT,@name VARCHAR(512)    
    
    SELECT    
     @name = a.name,  
     @enabled = enabled ,  
     @freq_interval = freq_interval ,   
     @freq_type = freq_type  ,  
     @freq_subday_type=freq_subday_type,    
     @freq_subday_interval=freq_subday_interval,    
     @freq_relative_interval=freq_relative_interval  ,  
     @freq_recurrence_factor=freq_recurrence_factor ,   
     @active_start_date=active_start_date ,   
     @active_end_date=active_end_date ,   
     @active_start_time=active_start_time  ,  
     @active_end_time=active_end_time    
     FROM msdb..sysschedules a   -- "msdb..sysschedules"  should be changed to the DB which you restored
     INNER JOIN msdb.dbo.sysjobschedules b ON a.schedule_id = b.schedule_id  -- "msdb..sysjobschedules " should be changed to the DB which you restored
    WHERE  job_id = @jobid    
        
    IF(@name IS not null)    
    begin    
     PRINT ‘    EXEC @ReturnCode = msdb.dbo.sp_add_jobschedule @job_id=@jobId, @name=N‘‘‘+@name+‘‘‘, ‘    
     PRINT ‘    @enabled=‘+RTRIM(@enabled)+‘, ‘    
     PRINT ‘    @freq_type=‘+RTRIM(@freq_type)+‘, ‘    
     PRINT ‘    @freq_interval=‘+RTRIM(@freq_interval)+‘, ‘    
     PRINT ‘    @freq_subday_type=‘+RTRIM(@freq_subday_type)+‘, ‘    
     PRINT ‘    @freq_subday_interval=‘+RTRIM(@freq_subday_interval)+‘, ‘    
     PRINT ‘    @freq_relative_interval=‘+RTRIM(@freq_relative_interval)+‘, ‘    
     PRINT ‘    @freq_recurrence_factor=‘+RTRIM(@freq_recurrence_factor)+‘, ‘    
     PRINT ‘    @active_start_date=‘+RTRIM(@active_start_date)+‘, ‘    
     PRINT ‘    @active_end_date=‘+RTRIM(@active_end_date)+‘, ‘    
     PRINT ‘    @active_start_time=‘+RTRIM(@active_start_time)+‘, ‘    
     PRINT ‘    @active_end_time=‘+RTRIM(@active_end_time)+‘ ‘    
     --PRINT ‘    @schedule_uid=N‘‘‘+RTRIM(NEWID())+‘‘‘‘    
     PRINT ‘ IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback‘    
    end    
        
    
    PRINT ‘ EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N‘‘‘+@server+‘‘‘‘    
    PRINT ‘ IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback‘    
    PRINT ‘COMMIT TRANSACTION‘    
    PRINT ‘GOTO endSave‘    
    PRINT ‘QuitWithRollback:‘    
    PRINT ‘IF(@@TRANCOUNT>0)ROLLBACK TRANSACTION‘    
    PRINT ‘endSave:‘    
    PRINT ‘ ‘    
    PRINT ‘GO‘          
              
     --PRINT @strsql      
     exec (@strsql)    
     end try    
   begin catch     
        declare @errmsg varchar(1000)    
        set @errmsg=‘[Prco_Get_IPDataBase]:‘+ERROR_MESSAGE()    
        print @errmsg    
        print @strsql    
  end catch;     
       fetch next from joblist into @jobnamecc   
       end  
  
   close joblist    
   deallocate  joblist