[洛谷P4245]【模板】任意模数NTT

题目大意:给你两个多项式$f(x)$和$g(x)$以及一个模数$p(p\leqslant10^9)$,求$f*g\pmod p$

题解:任意模数$NTT$,最大的数为$p^2\times\max\{n,m\}\leqslant10^{23}$,所以一般选$3$个模数即可,求出这三个模数下的答案,然后中国剩余定理即可。

假设这一位的答案是$x$,三个模数分别为$A,B,C$,那么:

$$
x\equiv x_1\pmod{A}\\
x\equiv x_2\pmod{B}\\
x\equiv x_3\pmod{C}
$$

先把前两个合并:

$$
x_1+k_1A=x_2+k_2B\\
x_1+k_1A\equiv x_2\pmod{B}\\
k_1\equiv \frac{x_2-x_1}A\pmod{B}
$$

于是求出了$k_1$,也就求出了$x\equiv x_1+k_1A\pmod{AB}$,记$x_4=x_1+k_1A$

$$
x_4+k_4AB=x_3+k_3C\\
x_4+k_4AB\equiv x_3\pmod{C}\\
k_4\equiv \dfrac{x_3-x_4}{AB}\pmod{C}
$$

求出了$k_4$,$x\equiv x_4+k_4AB\pmod{ABC}$,因为$x<ABC$,所以$x=x_4+k_4AB$

卡点:$Wn$数组开小,中国剩余定理写错

C++ Code:

#include <algorithm>
#include <cstdio>
#include <cstring>
int mod;
namespace Math {
inline int pw(int base, int p, const int mod) {
static int res;
for (res = 1; p; p >>= 1, base = static_cast<long long> (base) * base % mod) if (p & 1) res = static_cast<long long> (res) * base % mod;
return res;
}
inline int inv(int x, const int mod) { return pw(x, mod - 2, mod); }
} const int mod1 = 998244353, mod2 = 1004535809, mod3 = 469762049, G = 3;
const long long mod_1_2 = static_cast<long long> (mod1) * mod2;
const int inv_1 = Math::inv(mod1, mod2), inv_2 = Math::inv(mod_1_2 % mod3, mod3);
struct Int {
int A, B, C;
explicit inline Int() { }
explicit inline Int(int __num) : A(__num), B(__num), C(__num) { }
explicit inline Int(int __A, int __B, int __C) : A(__A), B(__B), C(__C) { }
static inline Int reduce(const Int &x) {
return Int(x.A + (x.A >> 31 & mod1), x.B + (x.B >> 31 & mod2), x.C + (x.C >> 31 & mod3));
}
inline friend Int operator + (const Int &lhs, const Int &rhs) {
return reduce(Int(lhs.A + rhs.A - mod1, lhs.B + rhs.B - mod2, lhs.C + rhs.C - mod3));
}
inline friend Int operator - (const Int &lhs, const Int &rhs) {
return reduce(Int(lhs.A - rhs.A, lhs.B - rhs.B, lhs.C - rhs.C));
}
inline friend Int operator * (const Int &lhs, const Int &rhs) {
return Int(static_cast<long long> (lhs.A) * rhs.A % mod1, static_cast<long long> (lhs.B) * rhs.B % mod2, static_cast<long long> (lhs.C) * rhs.C % mod3);
}
inline int get() {
long long x = static_cast<long long> (B - A + mod2) % mod2 * inv_1 % mod2 * mod1 + A;
return (static_cast<long long> (C - x % mod3 + mod3) % mod3 * inv_2 % mod3 * (mod_1_2 % mod) % mod + x) % mod;
}
} ; #define maxn 131072 namespace Poly {
#define N (maxn << 1)
int lim, s, rev[N];
Int Wn[N | 1];
inline void init(int n) {
s = -1, lim = 1; while (lim < n) lim <<= 1, ++s;
for (register int i = 1; i < lim; ++i) rev[i] = rev[i >> 1] >> 1 | (i & 1) << s;
const Int t(Math::pw(G, (mod1 - 1) / lim, mod1), Math::pw(G, (mod2 - 1) / lim, mod2), Math::pw(G, (mod3 - 1) / lim, mod3));
*Wn = Int(1); for (register Int *i = Wn; i != Wn + lim; ++i) *(i + 1) = *i * t;
}
inline void NTT(Int *A, const int op = 1) {
for (register int i = 1; i < lim; ++i) if (i < rev[i]) std::swap(A[i], A[rev[i]]);
for (register int mid = 1; mid < lim; mid <<= 1) {
const int t = lim / mid >> 1;
for (register int i = 0; i < lim; i += mid << 1) {
for (register int j = 0; j < mid; ++j) {
const Int W = op ? Wn[t * j] : Wn[lim - t * j];
const Int X = A[i + j], Y = A[i + j + mid] * W;
A[i + j] = X + Y, A[i + j + mid] = X - Y;
}
}
}
if (!op) {
const Int ilim(Math::inv(lim, mod1), Math::inv(lim, mod2), Math::inv(lim, mod3));
for (register Int *i = A; i != A + lim; ++i) *i = (*i) * ilim;
}
}
#undef N
} int n, m;
Int A[maxn << 1], B[maxn << 1];
int main() {
scanf("%d%d%d", &n, &m, &mod); ++n, ++m;
for (int i = 0, x; i < n; ++i) scanf("%d", &x), A[i] = Int(x % mod);
for (int i = 0, x; i < m; ++i) scanf("%d", &x), B[i] = Int(x % mod);
Poly::init(n + m);
Poly::NTT(A), Poly::NTT(B);
for (int i = 0; i < Poly::lim; ++i) A[i] = A[i] * B[i];
Poly::NTT(A, 0);
for (int i = 0; i < n + m - 1; ++i) {
printf("%d", A[i].get());
putchar(i == n + m - 2 ? '\n' : ' ');
}
return 0;
}

  

上一篇:將Python打包成 exe可执行文件


下一篇:拆系数FFT(任意模数FFT)