首发：https://learnblockchain.cn/article/2758
手动部署可升级能更好的理解部署过程、原理，主要原因是本人对前端工具使用不熟。以下只是本人学习时的操作记录，仅分享。使用remix部署。
首次部署
需要部署三个合约，分别是逻辑合约，ProxyAdmin，TransparentUpgradeProxy。逻辑合约就是我们自己的业务合约，需要满足OpenZeppelin可升级合约的条件。以下业务合约以Params合约为例进行说明。
业务合约Params
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
contract Params is Initializable,OwnableUpgradeable {
function initialize()public initializer{
__Context_init_unchained();
__Ownable_init_unchained();
}
mapping(string => uint256) private uint256Params;
event Uint256ParamSetted(string indexed _key,uint256 _value);
function SetUint256Param(string memory _key,uint256 _value) external onlyOwner{
uint256Params[_key] = _value;
emit Uint256ParamSetted(_key,_value);
}
function GetUint256Param(string memory _key)public view returns(uint256){
return uint256Params[_key];
}
}
部署后地址为：0xe2899bddFD890e320e643044c6b95B9B0b84157A，先不进行初始化（initialize，本方法对应的code为 0x8129fc1c ）
ProxyAdmin 管理合约
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
/**
* @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
* explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
*/
contract ProxyAdmin is Ownable {
/**
* @dev Returns the current implementation of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("implementation()")) == 0x5c60da1b
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Returns the current admin of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("admin()")) == 0xf851a440
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Changes the admin of `proxy` to `newAdmin`.
*
* Requirements:
*
* - This contract must be the current admin of `proxy`.
*/
function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
proxy.changeAdmin(newAdmin);
}
/**
* @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
proxy.upgradeTo(implementation);
}
/**
* @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
* {TransparentUpgradeableProxy-upgradeToAndCall}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgradeAndCall(
TransparentUpgradeableProxy proxy,
address implementation,
bytes memory data
) public payable virtual onlyOwner {
proxy.upgradeToAndCall{value: msg.value}(implementation, data);
}
}
部署后地址为：0x1c91347f2A44538ce62453BEBd9Aa907C662b4bD
TransparentUpgradeableProxy 代理合约，DAPP直接交互的合约地址
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol";
/**
* @dev This contract implements a proxy that is upgradeable by an admin.
*
* To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
* *ing], which can potentially be used in an attack, this contract uses the
* https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
* things that go hand in hand:
*
* 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
* that call matches one of the admin functions exposed by the proxy itself.
* 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
* implementation. If the admin tries to call a function on the implementation it will fail with an error that says
* "admin cannot fallback to proxy target".
*
* These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
* the admin, so it‘s best if it‘s a dedicated account that is not used for anything else. This will avoid headaches due
* to sudden errors when trying to call a function from the proxy implementation.
*
* Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
* you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
*/
contract TransparentUpgradeableProxy is ERC1967Proxy {
/**
* @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
* optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
*/
constructor(
address _logic,
address admin_,
bytes memory _data
) payable ERC1967Proxy(_logic, _data) {
assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
_changeAdmin(admin_);
}
/**
* @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
*/
modifier ifAdmin() {
if (msg.sender == _getAdmin()) {
_;
} else {
_fallback();
}
}
/**
* @dev Returns the current admin.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
*/
function admin() external ifAdmin returns (address admin_) {
admin_ = _getAdmin();
}
/**
* @dev Returns the current implementation.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
*/
function implementation() external ifAdmin returns (address implementation_) {
implementation_ = _implementation();
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
*/
function changeAdmin(address newAdmin) external virtual ifAdmin {
_changeAdmin(newAdmin);
}
/**
* @dev Upgrade the implementation of the proxy.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeToAndCall(newImplementation, bytes(""), false);
}
/**
* @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
* by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
* proxied contract.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
_upgradeToAndCall(newImplementation, data, true);
}
/**
* @dev Returns the current admin.
*/
function _admin() internal view virtual returns (address) {
return _getAdmin();
}
/**
* @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
*/
function _beforeFallback() internal virtual override {
require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
super._beforeFallback();
}
}
部署需要参数，如下:
- _LOGIC:逻辑合约地址，这里为 0xe2899bddFD890e320e643044c6b95B9B0b84157A
- ADMIN_：管理合约地址，这里为 0x1c91347f2A44538ce62453BEBd9Aa907C662b4bD
- _DATA：逻辑合约初始化方法调用数据，这里为
0x8129fc1c（只调用initialize方法，initialize方法没有入参，如果有参数也是支持的）
部署后地址为：0x93f8dddd876c7dBE3323723500e83E202A7C96CC
以上，可升级合约部署完毕，DAPP可以调用0x93f8dddd876c7dBE3323723500e83E202A7C96CC访问Params合约。
测试用例：调用SetUint256Param，设置_key=K,_VALUE=1，并通过GetUint256Param进行验证。
合约升级
修改Params合约，并部署
function GetUint256Param(string memory _key)public view returns(uint256){
uint256 v = uint256Params[_key];
return v+1;
}
直接部署Params合约，部署后地址为：0x406AB5033423Dcb6391Ac9eEEad73294FA82Cfbc
调用ProxyAdmin进行升级
ProxyAdmin提供两个方法进行升级
- upgrade，需要传入proxy地址，新的逻辑实现地址
- upgradeAndCall，需要传入roxy地址，新的逻辑实现地址，初始化调用数据
本例中，由于数据是保存在代理合约中，这份数据已经初始化过了，不需要再初始化，所以调用upgrade方法即可，参数如下:
- proxy:0x93f8dddd876c7dBE3323723500e83E202A7C96CC
- implementation:0x406AB5033423Dcb6391Ac9eEEad73294FA82Cfbc
至此，合约升级完毕。调用GetUint256Param方法进行验证，获得_key=K的value为2，合约升级成功。
注意事项
- 可升级合约的存储不能乱，即：只能新增存储项，不能修改顺序
- 没有构造函数，使用initialize替代
- 继承的父合约也需要能满足升级，本例中的Ownable采用OwnableUpgradeable，支持升级
- 可使用OpenZeppelin插件验证合约是否为可升级合约，以及升级时是否有冲突