http://www.voidcn.com/article/p-wiipzvle-bza.html

 

安装下载

wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add -
sudo apt-get install apt-transport-https
echo "deb https://artifacts.elastic.co/packages/7.x/apt stable main" | sudo tee -a /etc/apt/sources.list.d/elastic-7.x.list
sudo apt-get update && sudo apt-get install metricbeat

配置启动

cat /etc/metricbeat/metricbeat.yml |grep -vE "^#|^$"
      metricbeat.config.modules:
     # Glob pattern for configuration loading
     path: ${path.config}/modules.d/*.yml
     # Set to true to enable config reloading
     reload.enabled: false
     # Period on which files under path should be checked for changes
     #reload.period: 10s
   setup.template.settings:
     index.number_of_shards: 1
     index.codec: best_compression
     #_source.enabled: false
   setup.kibana:
     # Kibana Host
     # Scheme and port can be left out and will be set to the default (http and 5601)
     # In case you specify and additional path, the scheme is required: http://localhost:5601/path
     # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
     host: "192.168.1.43:5601"
     # Kibana Space ID
     # ID of the Kibana Space into which the dashboards should be loaded. By default,
     # the Default Space will be used.
     #space.id:
   output.elasticsearch:
     # Array of hosts to connect to.
     hosts: ["192.168.1.43:9200"]
     # Enabled ilm (beta) to use index lifecycle management instead daily indices.
     #ilm.enabled: false
     # Optional protocol and basic auth credentials.
     #protocol: "https"
     #username: "elastic"
     #password: "changeme"
     # The Logstash hosts
     #hosts: ["localhost:5044"]
     # Optional SSL. By default is off.
     # List of root certificates for HTTPS server verifications
     #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
     # Certificate for SSL client authentication
     #ssl.certificate: "/etc/pki/client/cert.pem"
     # Client Certificate Key
     #ssl.key: "/etc/pki/client/cert.key"
   processors:
     - add_host_metadata: ~
     - add_cloud_metadata: ~

启动和启动

update-rc.d metricbeat defaults 95 10
/etc/init.d/metricbeat restart   #重新启动
metricbeat setup --dashboards  #启动dashboards

查看kibana的dashboards

启动监控服务模块(nginx,redis,mysql)

metricbeat  modules enable redis
metricbeat  modules enable mysql
metricbeat  modules enable nginx

查看服务性能监控

查看启动模块

metricbeat modules list
     #Enabled模块为启用模块 Disabled模块为未启用模块

.

启动新模块

启用新模块命令，例如启用nginx模块
metricbeat modules enable nginx

设置监控nginx

[email protected]:/etc/metricbeat/modules.d# cat nginx.yml 
# Module: nginx
# Docs: https://www.elastic.co/guide/en/beats/metricbeat/6.8/metricbeat-module-nginx.html
- module: nginx
  metricsets:
    - stubstatus
  enabled: true
  period: 10s
  # Nginx hosts
  hosts: ["http://127.0.0.1"]
  # Path to server status. Default server-status
  server_status_path: "nginx_status"
  #username: "user"
  #password: "secret"

nginx设置

server {
   server_name _;
   location /nginx_status {
       stub_status on;
       access_log off;
      allow 127.0.0.1;
      deny all;
      }
  }

设置监控mysql

[email protected]:/etc/metricbeat/modules.d# cat mysql.yml 
# Module: mysql
# Docs: https://www.elastic.co/guide/en/beats/metricbeat/6.8/metricbeat-module-mysql.html

- module: mysql
  metricsets:
    - status
  #  - galera_status
  period: 10s

  # Host DSN should be defined as "user:[email protected](127.0.0.1:3306)/"
  # The username and password can either be set in the DSN or using the username
  # and password config options. Those specified in the DSN take precedence.
  hosts: ["tcp(192.168.1.39:3306)/"]

  # Username of hosts. Empty by default.
  username: root

  # Password of hosts. Empty by default.
  password: 123456
#- module: 45-mysql
#  metricsets:
#    - status
#  period: 10s
#  hosts: ["tcp(192.168.1.45:3306)/"]
#  username: ops
#  password: ops12300.

设置监控redis

- module: redis
     hosts: ["192.168.1.43:6379"]
     metricsets: ["info","keyspace"]
     enables: true
     period: 10s
     password: password

    相关文章

• 1. kibana使用metricbeat性能监控
• 2. ELK MetricBeat配置监控主机性能
• 3. [Metricbeat] Metricbeat监控golang服务器
• 4. metricbeat 监控 nginx 状况
• 5. 性能监控
• 6. 使用jconsole监控weblogic的性能
• 7. Golang使用pprof监控性能
• 8. 使用 mytop 监控mysql性能状态
• 9. 【zabbix】性能监控平台zabbix使用
• 10. MYSQL使用PMM进行性能监控