转自：http://blog.chinaunix.net/uid-23381466-id-3837650.html
内核版本：2.6.38-11-generic
内核自己都大量利用内核符号表导出函数，那么应该导出呢，ldd3上面说只需要EXPORT_SYMBOL一类的宏导出即可，结果试了很久都不行，最后查看文档，算是明白一点了。
对于导出符号表，内核文档给出了三种解决方案，见尾部，现在忽略。
现在有两个模块，a模块导出函数myprint，b模块使用该函数，想象一下如果a模块 EXPORT_SYMBOL(myprint) ，实际上b模块知道吗，很明显b模块对这件事情不是很清楚(这么说不是很准确)，要调用a模块的myprint函数，需要知道myprint函数在内存中的位置，首先在内核符号表中是没有说明的，所以...
当我们编译完a模块后，看看有些什么文件，是不是有一个Module.symvers文件，打开看看什么状况？
0x705034f7 myprint /home/darren/Desktop/darren/print/myprint EXPORT_SYMBOL
好了，这一行对b模块来说已经足够了,指定了内存位置，符号名称，模块路径。最简单的方法就是把这个文件复制到b模块所在目录,然后编译就没有讨厌的错误了，可以正常insmod模块。这种方法是内核文档中提到的方法之一。
但是每次调用该函数都要复制一次，更糟糕的是a模块每编译一次,都要重新复制一次，为什么内核自己导出的函数我们可以直接用呢？现在就就解决:
编译内核的时候同样会生成一个Module.symvers文件，内核导出的所有符号都在里面，我们在编译模块的时候实际上会调用内核的顶层makefile，也就是说内核的Module.symvers对我们的模块是可见的，和我们自己的Module.symvers文件一样，OK，把a模块的Module.symvers文件合并到内核的Module.symvers文件中，这时候myprint函数就成了真正的导出函数了，其他的模块只需要生命一下就可以用了。
代码如下
a模块代码：
- #include <linux/module.h>
- #include <linux/init.h>
- #include <linux/kernel.h>
- MODULE_LICENSE("GPL");
- int myprint(void)
- {
- printk("c");
- return 0;
- }
- static int darren_init(void)
- {
- return 0;
- }
- static void darren_exit(void)
- {
- }
- module_init(darren_init);
- module_exit(darren_exit);
- EXPORT_SYMBOL(myprint);
b模块代码：
- #include <linux/seq_file.h>
- #include <linux/cdev.h>
- #include <asm/system.h>
- MODULE_LICENSE("GPL");
- extern int print(void);
- static int darren_init(void)
- {
- int i=0;
- printk("b module init\n");
- for(;i<10;i++)print();
- return 0;
- }
- static void darren_exit(void)
- {
- }
- module_init(darren_init);
- module_exit(darren_exit);
a模块的Makefile如下：
- NAME:=a
- SYM:=/usr/src/linux-headers-2.6.38-8-generic/Module.symvers
- DIR:=/lib/modules/$(shell uname -r)/build/
- PWD:=$(shell pwd)
- obj-m = $(NAME).o
- build:
- make -C (DIR)M=(PWD)
- sudo chmod 777 $(SYM)
- sudo sed -i '/myprint/d' $(SYM)
- sudo cat Module.symvers>>$(SYM)
- sudo chmod 644 $(SYM)
b模块的makefile:
- NAME:=b
- DIR:=/lib/modules/$(shell uname -r)/build/
- PWD:=$(shell pwd)
- obj-m = $(NAME).o
- build:
- make -C (DIR)M=(PWD)
注意：路径/usr/src/linux-headers-2.6.38-8-generic/Module.symvers 有可能不对如果不行就改成/usr/src/linux-headers-`uname -r`-generic/Module.symvers
内核文档:
- Sometimes, an external module uses exported symbols from
- another external module. kbuild needs to have full knowledge of
- all symbols to avoid spitting out warnings about undefined
- symbols. Three solutions exist for this situation.
- NOTE: The method with a top-level kbuild file is recommended
- but may be impractical in certain situations.
- Use a top-level kbuild file
- If you have two modules, foo.ko and bar.ko, where
- foo.ko needs symbols from bar.ko, you can use a
- common top-level kbuild file so both modules are
- compiled in the same build. Consider the following
- directory layout:
- ./foo/ <= contains foo.ko
- ./bar/ <= contains bar.ko
- The top-level kbuild file would then look like:
- #./Kbuild (or ./Makefile):
- obj-y := foo/ bar/
- And executing
- make−CKDIR M=$PWD
- will then do the expected and compile both modules with
- full knowledge of symbols from either module.
- Use an extra Module.symvers file
- When an external module is built, a Module.symvers file
- is generated containing all exported symbols which are
- not defined in the kernel. To get access to symbols
- from bar.ko, copy the Module.symvers file from the
- compilation of bar.ko to the directory where foo.ko is
- built. During the module build, kbuild will read the
- Module.symvers file in the directory of the external
- module, and when the build is finished, a new
- Module.symvers file is created containing the sum of
- all symbols defined and not part of the kernel.
- Use "make" variable KBUILD_EXTRA_SYMBOLS
- If it is impractical to copy Module.symvers from
- another module, you can assign a space separated list
- of files to KBUILD_EXTRA_SYMBOLS in your build file.
- These files will be loaded by modpost during the
- initialization of its symbol tables.