Oracle集群（RAC）时间同步（ntp和CTSS）
http://blog.itpub.net/26736162/viewspace-2157130/
crsctl stat res -t -init
ps -ef|grep ctss
crsctl check ctss
cluvfy comp clocksync -n all -verbose
crsctl start res ora.ctssd -init
crsctl stop res ora.ctssd -init
Network Time Protocol Setting
l You have two options for time synchronization: an operating system configured network time protocol (NTP), or Oracle Cluster Time Synchronization Service.
l Oracle Cluster Time Synchronization Service is designed for organizations whose cluster servers are unable to access NTP services.
l If you use NTP, then the Oracle Cluster Time Synchronization daemon (ctssd) starts up in observer mode. If you do not have NTP daemons, then ctssd starts up in active mode and synchronizes time among cluster members without contacting an external time server..
可以采用操作系统的NTP服务，也可以使用Oracle自带的服务ctss，如果ntp没有启用，那么Oracle会自动启用自己的ctssd进程。
从oracle 11gR2 RAC开始使用Cluster Time Synchronization Service(CTSS)同步各节点的时间,当安装程序发现NTP协议处于非活动状态时，安装集群时间同步服务将以活动模式（active）自动进行安装并同步所有节点的时间。如果发现配置了 NTP，则以观察者模式（observer mode）启动集群时间同步服务，Oracle Clusterware不会在集群中进行活动的时间同步。
在RAC中，集群的时间应该是保持同步的，否则可能导致很多问题，例如：依赖于时间的应用会造成数据的错误，各种日志打印的顺序紊乱，这将会影响问题的诊断，严重的可能会导致集群宕机或者重新启动集群时节点无法加入集群。
在Oracle 11gR2前，集群的时间是由NTP同步的，而在11gR2后，Oracle引入了CTSS组件，如果系统没有配置NTP，则由CTSS来同步集群时间。
NTP和CTSS是可以共存的，且NTP的优先级要高于CTSS，也就是说，如果系统中同时有NTP和CTSS，那么集群的时间是由NTP同步的，CTSS会处于观望（Observer）模式，只有当集群关闭所有的NTP服务，CTSS才会处于激活（Active）模式。在一个集群中，只要有一个节点的ntp处于活动状态，那么集群的所有节点的CTSS都会处于激活（Active）模式。
需要注意的是，要让CTSS处于激活（Active）模式，则不仅要关闭ntp服务（/sbin/service ntpd stop），还要删除/etc/ntp.conf文件（mv /etc/ntp.conf /etc/ntp.conf.bak），否则不能启用CTSS。
1.1.1 CTSS同步模式
关闭NTP：
/sbin/service ntpd stop
mv /etc/ntp.conf /etc/ntp.conf.bak
service ntpd status
chkconfig ntpd off
[root@raclhr-11gR2-N2 ~]# ps -ef|grep ctss
root 19678 1 0 19:22 ? 00:00:02 /u01/app/11.2.0/grid/bin/octssd.bin reboot
root 20970 20623 0 19:35 pts/4 00:00:00 grep ctss
[root@raclhr-11gR2-N2 ~]#
[root@raclhr-11gR2-N2 ~]# crsctl stat res -t -init
--------------------------------------------------------------------------------
NAME TARGET STATE SERVER STATE_DETAILS
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.asm
1 ONLINE ONLINE raclhr-11gr2-n2 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE raclhr-11gr2-n2
ora.crf
1 ONLINE ONLINE raclhr-11gr2-n2
ora.crsd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.cssd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.cssdmonitor
1 ONLINE ONLINE raclhr-11gr2-n2
ora.ctssd
1 ONLINE ONLINE raclhr-11gr2-n2 ACTIVE:0
ora.diskmon
1 OFFLINE OFFLINE
ora.evmd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.gipcd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.gpnpd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.mdnsd
1 ONLINE ONLINE raclhr-11gr2-n2
[root@raclhr-11gR2-N2 ~]#
节点1的ctss状态：
[root@raclhr-11gR2-N1 ~]# crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[root@raclhr-11gR2-N1 ~]#
节点1的octssd的日志：
/u01/app/11.2.0/grid/log/raclhr-11gr2-n1/ctssd/octssd.log
2018-06-30 19:25:56.369: [ CTSS][899475200]sclsctss_gvss2: NTP default pid file not found
2018-06-30 19:25:56.369: [ CTSS][899475200]sclsctss_gvss8: Return [0] and NTP status [1].
2018-06-30 19:25:56.369: [ CTSS][899475200]ctss_check_vendor_sw: Vendor time sync software is not detected. status [1].
2018-06-30 19:25:57.002: [ CTSS][916338432]ctss_checkcb: clsdm requested check alive. checkcb_data{mode[0xcc], offset[0 ms]}, length=[8].
2018-06-30 19:26:01.263: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
2018-06-30 19:26:01.264: [ CTSS][901576448]ctsscomm_msg_hndlr: Received sync msg
2018-06-30 19:26:01.264: [ CTSS][901576448]ctsscomm_msg_hndlr: Received from slave ( mode [0xc4] nodenum [2] hostname [raclhr-11gr2-n2] )
2018-06-30 19:26:09.267: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
节点1的octssd.log中记录没有发现ntp服务，ctss服务为激活模式。
节点2的ctss状态：
[root@raclhr-11gR2-N2 ~]# crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[root@raclhr-11gR2-N2 ~]#
节点2的octssd的日志：
/u01/app/11.2.0/grid/log/raclhr-11gr2-n2/ctssd/octssd.log
2018-06-30 19:28:49.539: [ CTSS][839321344]sclsctss_gvss2: NTP default pid file not found
2018-06-30 19:28:49.539: [ CTSS][839321344]sclsctss_gvss8: Return [0] and NTP status [1].
2018-06-30 19:28:49.539: [ CTSS][839321344]ctss_check_vendor_sw: Vendor time sync software is not detected. status [1].
2018-06-30 19:29:05.544: [ CTSS][839321344]ctsselect_msm: CTSS mode is [0xc4]
2018-06-30 19:29:05.544: [ CTSS][839321344]ctssslave_swm1_2: Ready to initiate new time sync process.
2018-06-30 19:29:05.545: [ CTSS][839321344]ctssslave_swm2_1: Waiting for time sync message from master. sync_state[2].
2018-06-30 19:29:05.546: [ CTSS][845625088]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [2].
2018-06-30 19:29:05.546: [ CTSS][845625088]ctssslave_msg_handler4_1: Waiting for slave_sync_with_master to finish sync process. sync_state[3].
2018-06-30 19:29:05.547: [ CTSS][839321344]ctssslave_swm2_3: Received time sync message from master.
2018-06-30 19:29:05.547: [ CTSS][839321344]ctssslave_swm: The system time difference is too small [243] usec. Not adjusting time.
2018-06-30 19:29:05.547: [ CTSS][839321344]ctssslave_swm17: LT [1530358145sec 546888usec], MT [1530358145sec 140655884523349usec], Delta [2314usec]
2018-06-30 19:29:05.547: [ CTSS][839321344]ctssslave_swm19: The offset is [243 usec] and sync interval set to [1]
2018-06-30 19:29:05.547: [ CTSS][839321344]ctssslave_swm: Received from master (mode [0xcc] nodenum [1] hostname [raclhr-11gr2-n1] )
2018-06-30 19:29:05.547: [ CTSS][839321344]ctsselect_msm: Sync interval returned in [1]
2018-06-30 19:29:05.547: [ CTSS][845625088]ctssslave_msg_handler4_3: slave_sync_with_master finished sync process. Exiting clsctssslave_msg_handler
2018-06-30 19:29:07.910: [ CTSS][860387072]ctss_checkcb: clsdm requested check alive. checkcb_data{mode[0xc4], offset[0 ms]}, length=[8].
节点2的octssd.log中记录没有发现ntp服务，ctss服务为激活模式，同步时间的主节点是节点1，并且会告诉集群的时间有差异，但是因为差异过小，无需调整。
校验集群的时间：
cluvfy comp clocksync -n all -verbose
虽然集群时间不一致，但是这种情况下校验结果是通过的，而且略微的差异范围内集群也会自动同步回来。
[grid@raclhr-11gR2-N1 ~]$ cluvfy comp clocksync -n all -verbose
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
------------------------------------ ------------------------
raclhr-11gr2-n2 passed
raclhr-11gr2-n1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
------------------------------------ ------------------------
raclhr-11gr2-n2 Active
raclhr-11gr2-n1 Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name Time Offset Status
------------ ------------------------ ------------------------
raclhr-11gr2-n2 0.0 passed
raclhr-11gr2-n1 0.0 passed
Time offset is within the specified limits on the following set of nodes:
"[raclhr-11gr2-n2, raclhr-11gr2-n1]"
Result: Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
1.1.2 NTP同步模式
开启NTP:
mv /etc/ntp.conf.bak /etc/ntp.conf
service ntpd status
/sbin/service ntpd start
# chkconfig ntpd off
ps -ef|grep ntp
节点1 ：
[root@raclhr-11gR2-N1 ~]# crsctl check ctss
CRS-4700: The Cluster Time Synchronization Service is in Observer mode.
[root@raclhr-11gR2-N1 ~]# crsctl stat res -t -init
ora.ctssd
1 ONLINE ONLINE raclhr-11gr2-n1 OBSERVER
节点1的ctss日志：
/u01/app/11.2.0/grid/log/raclhr-11gr2-n1/ctssd/octssd.log
2018-06-30 20:51:29.388: [ CTSS][899475200]sclsctss_gvss1: NTP default config file found
2018-06-30 20:51:29.389: [ CTSS][899475200]sclsctss_gvss8: Return [0] and NTP status [2].
2018-06-30 20:51:29.389: [ CTSS][899475200]ctss_check_vendor_sw: Vendor time sync software is detected. status [2].
2018-06-30 20:51:29.389: [ CTSS][899475200]ctss_check_vendor_sw: Ctssd is switching to observer role
2018-06-30 20:51:29.389: [ CTSS][899475200]clsctsselect_update_mbrdata: Updating pridata: { version[1] node[1] swversion[186647296] mode[0xee] }.
2018-06-30 20:51:29.639: [ CRSCCL][671086336]clsCclGetPriMemberData: Detected pridata change for node[1]. Retrieving it to the cache.
2018-06-30 20:51:31.434: [ CTSS][916338432]ctss_checkcb: clsdm requested check alive. checkcb_data{mode[0xee], offset[0 ms]}, length=[8].
2018-06-30 20:51:35.258: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
2018-06-30 20:51:35.258: [ CTSS][901576448]ctsscomm_msg_hndlr: Received sync msg
2018-06-30 20:51:35.259: [ CTSS][901576448]ctsscomm_msg_hndlr: Received from slave ( mode [0xc4] nodenum [2] hostname [raclhr-11gr2-n2] )
2018-06-30 20:51:35.656: [ CRSCCL][671086336]clsCclGetPriMemberData: Detected pridata change for node[2]. Retrieving it to the cache.
2018-06-30 20:51:43.240: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
2018-06-30 20:51:43.240: [ CTSS][901576448]ctsscomm_msg_hndlr: Received sync msg
2018-06-30 20:51:43.240: [ CTSS][901576448]ctsscomm_msg_hndlr: Received from slave ( mode [0xc6] nodenum [2] hostname [raclhr-11gr2-n2] )
2018-06-30 20:51:51.217: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
2018-06-30 20:51:51.217: [ CTSS][901576448]ctsscomm_msg_hndlr: Received sync msg
2018-06-30 20:51:51.218: [ CTSS][901576448]ctsscomm_msg_hndlr: Received from slave ( mode [0xc6] nodenum [2] hostname [raclhr-11gr2-n2] )
2018-06-30 20:51:59.194: [ CTSS][901576448]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [1].
2018-06-30 20:51:59.194: [ CTSS][901576448]ctsscomm_msg_hndlr: Received sync msg
2018-06-30 20:51:59.195: [ CTSS][901576448]ctsscomm_msg_hndlr: Received from slave ( mode [0xc6] nodenum [2] hostname [raclhr-11gr2-n2] )
节点1的octssd.log中记录发现ntp服务，ctss服务会自动切换到观望模式。
2018-06-30 20:57:27.608: [ CTSS][839321344]ctsselect_msm: CTSS mode is [0xc6]
2018-06-30 20:57:27.608: [ CTSS][839321344]ctssslave_swm1_2: Ready to initiate new time sync process.
2018-06-30 20:57:27.609: [ CTSS][839321344]ctssslave_swm2_1: Waiting for time sync message from master. sync_state[2].
2018-06-30 20:57:27.612: [ CTSS][845625088]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [2].
2018-06-30 20:57:27.613: [ CTSS][845625088]ctssslave_msg_handler4_1: Waiting for slave_sync_with_master to finish sync process. sync_state[3].
2018-06-30 20:57:27.613: [ CTSS][839321344]ctssslave_swm2_3: Received time sync message from master.
2018-06-30 20:57:27.613: [ CTSS][839321344]ctssslave_swm17: LT [1530363447sec 613028usec], MT [1530363447sec 140655884569984usec], Delta [4410usec]
2018-06-30 20:57:27.613: [ CTSS][839321344]ctssslave_swm19: The offset is [19748 usec] and sync interval set to [1]
2018-06-30 20:57:27.613: [ CTSS][839321344]ctssslave_swm: Received from master (mode [0xee] nodenum [1] hostname [raclhr-11gr2-n1] )
2018-06-30 20:57:27.613: [ CTSS][839321344]ctsselect_msm: Sync interval returned in [1]
2018-06-30 20:57:27.613: [ CTSS][845625088]ctssslave_msg_handler4_3: slave_sync_with_master finished sync process. Exiting clsctssslave_msg_handler
节点2的octssd.log中也会记录发现ntp服务，ctss服务为观望模式，并且同步时间的主节点是节点1。
1.1.3 模拟集群时间不一致
如果在我们生产系统中碰到集群时间不一致会导致什么结果，我们的排查思路是怎么样的，以下是模拟集群时间不一致的场景。
更改节点2的时间，向后推移2天：
将系统时间设定成2018年07月02日的命令如下：
#date -s 07/02/2018
将系统时间设定成下午23点23分06秒的命令如下。
#date -s 23:23:06
[root@raclhr-11gR2-N2 ctssd]# crsctl stat res -t -init
ora.ctssd
1 ONLINE ONLINE raclhr-11gr2-n2 ACTIVE:172768000
[root@raclhr-11gR2-N2 ctssd]# crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 172768000
172768000微妙大约为2天:
SYS@lhrrac11> select 172768000/1000/24/60/60 from dual;
172768000/1000/24/60/60
-----------------------
1.99962963
更改节点2的时间后，在ASM和DB的alert日志中产生了以下的告警信息：
Time drift detected. Please check VKTM trace file for more details.
drift表示漂移。
[grid@raclhr-11gR2-N2 trace]$ pwd
/u01/app/grid/diag/asm/+asm/+ASM2/trace
[grid@raclhr-11gR2-N2 trace]$ ll -lrt *vktm*
-rw-r----- 1 grid oinstall 136 May 17 14:09 +ASM2_vktm_29999.trm
-rw-r----- 1 grid oinstall 1847 May 17 14:09 +ASM2_vktm_29999.trc
-rw-r----- 1 grid oinstall 529 Jun 4 14:52 +ASM2_vktm_32504.trm
-rw-r----- 1 grid oinstall 7238 Jun 4 14:52 +ASM2_vktm_32504.trc
-rw-r----- 1 grid oinstall 78 Jun 4 14:59 +ASM2_vktm_14800.trm
-rw-r----- 1 grid oinstall 1079 Jun 4 14:59 +ASM2_vktm_14800.trc
-rw-r----- 1 grid oinstall 90 Jun 4 17:26 +ASM2_vktm_14991.trm
-rw-r----- 1 grid oinstall 1200 Jun 4 17:26 +ASM2_vktm_14991.trc
-rw-r----- 1 grid oinstall 89 Jun 29 10:05 +ASM2_vktm_17961.trm
-rw-r----- 1 grid oinstall 1200 Jun 29 10:05 +ASM2_vktm_17961.trc
-rw-r----- 1 grid oinstall 191 Jul 2 21:35 +ASM2_vktm_19774.trm
-rw-r----- 1 grid oinstall 3171 Jul 2 21:35 +ASM2_vktm_19774.trc
[grid@raclhr-11gR2-N2 trace]$ cat +ASM2_vktm_19774.trc
*** 2018-06-30 19:22:12.650
VKTM running at (1)millisec precision with DBRM quantum (100)ms
[Start] HighResTick = 1530357732650537
kstmrmtickcnt = 0 : ksudbrmseccnt[0] = 1530357732
kstmchkdrift (kstmhighrestimecntkeeper:highres): Time stalled at 1530363888044519
*** 2018-06-10 20:04:00.000
kstmchkdrift (kstmhighrestimecntkeeper:highres): Time jumped forward by
(172844812599)usec at (1528632240000738) whereas (1000000) is allowed
usec代表微秒，ms表示毫秒，1s=1000ms=1000000us
VKTM进程发现系统时间变了，alert日志会产生相应的告警信息，从产生的trace文件中可知，系统向前推进了172844812599微秒，也即为2天，也就是我们模拟更改的时间，而允许的差异范围为1秒。
SYS@lhrrac11> select 172844812599/1000/1000/24/60/60 from dual;
172844812599/1000/1000/24/60/60
-------------------------------
2.00051866
节点2的octssd.log中和ctss状态都记录了偏移的时间：
2018-07-02 21:54:39.330: [ CTSS][1400497920]ctsselect_msm: CTSS mode is [0x84]
2018-07-02 21:54:39.330: [ CTSS][1400497920]ctssslave_swm1_2: Ready to initiate new time sync process.
2018-07-02 21:54:39.330: [ CTSS][1400497920]ctssslave_swm2_1: Waiting for time sync message from master. sync_state[2].
2018-07-02 21:54:39.331: [ CTSS][1404700416]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [2].
2018-07-02 21:54:39.331: [ CTSS][1404700416]ctssslave_msg_handler4_1: Waiting for slave_sync_with_master to finish sync process. sync_state[3].
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm2_3: Received time sync message from master.
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm: The magnitude [172757997797] of the offset [172757997797 usec] is larger than [86400000000 usec] sec which is the CTSS limit.
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm: The magnitude of the systime diff is larger than max adjtime limit. Offset [172757997797] usec will be changed to max adjtime limit [+/- 131071].
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm15: The CTSS master is behind this node. The local time offset [-131071 usec] is being adjusted. Sync method [2]
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm17: LT [1530539679sec 331583usec], MT [1530366921sec 139882790197210usec], Delta [1267usec]
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm19: The offset is [131071 usec] and sync interval set to [4]
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctssslave_swm: Received from master (mode [0x8c] nodenum [1] hostname [raclhr-11gr2-n1] )
2018-07-02 21:54:39.331: [ CTSS][1400497920]ctsselect_msm: Sync interval returned in [4]
2018-07-02 21:54:39.331: [ CTSS][1404700416]ctssslave_msg_handler4_3: slave_sync_with_master finished sync process. Exiting clsctssslave_msg_handler
集群的时间同步校验也是失败的，校验结果是需要同步节点2的时间，此时因为集群时间差异较大，同步服务往往是无法做到的，只有手工同步才能修复。
校验集群的时间同步：
[grid@raclhr-11gR2-N2 ~]$ cluvfy comp clocksync -n all -verbose
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
------------------------------------ ------------------------
raclhr-11gr2-n2 passed
raclhr-11gr2-n1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
------------------------------------ ------------------------
raclhr-11gr2-n2 Active
raclhr-11gr2-n1 Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name Time Offset Status
------------ ------------------------ ------------------------
raclhr-11gr2-n2 1.727568E8 failed
raclhr-11gr2-n1 0.0 passed
Result: PRVF-9661 : Time offset is greater than acceptable limit on node "raclhr-11gr2-n2" [actual = "1.727568E8", acceptable = "1000.0" ]
PRVF-9652 : Cluster Time Synchronization Services check failed
Verification of Clock Synchronization across the cluster nodes was unsuccessful.
Checks did not pass for the following node(s):
raclhr-11gr2-n2
1.727568E8表示科学计数法，为1.7*10的8次方，即172756800ms，即2天。
在没有同步时间之前，重启节点2是无法正常启动的，从以下命令可知是在ctss这一步有问题，通过重新更改正确时间后，集群才能正常启动。
[root@raclhr-11gR2-N2 ~]# crsctl stat res -t -init
--------------------------------------------------------------------------------
NAME TARGET STATE SERVER STATE_DETAILS
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.asm
1 ONLINE OFFLINE Instance Shutdown
ora.cluster_interconnect.haip
1 ONLINE ONLINE raclhr-11gr2-n2
ora.crf
1 ONLINE ONLINE raclhr-11gr2-n2
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.cssdmonitor
1 ONLINE ONLINE raclhr-11gr2-n2
ora.ctssd
1 ONLINE OFFLINE
ora.diskmon
1 OFFLINE OFFLINE
ora.evmd
1 ONLINE OFFLINE
ora.gipcd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.gpnpd
1 ONLINE ONLINE raclhr-11gr2-n2
ora.mdnsd
1 ONLINE ONLINE raclhr-11gr2-n2
查看集群的告警日志：
/u01/app/11.2.0/grid/log/raclhr-11gr2-n2/alertraclhr-11gr2-n2.log
2018-07-02 22:05:36.344
[ctssd(30350)]CRS-2405:The Cluster Time Synchronization Service on host raclhr-11gr2-n2 is shutdown by user
2018-07-02 22:05:40.689
[ctssd(30358)]CRS-2407:The new Cluster Time Synchronization Service reference node is host raclhr-11gr2-n1.
2018-07-02 22:05:40.689
[ctssd(30358)]CRS-2401:The Cluster Time Synchronization Service started on host raclhr-11gr2-n2.
2018-07-02 22:05:42.704
[ctssd(30358)]CRS-2404:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/raclhr-11gr2-n2/ctssd/octssd.log.
2018-07-02 22:05:43.395
[ctssd(30358)]CRS-2402:The Cluster Time Synchronization Service aborted on host raclhr-11gr2-n2. Details at in /u01/app/11.2.0/grid/log/raclhr-11gr2-n2/ctssd/octssd.log.
2018-07-02 22:05:44.404
[ohasd(29989)]CRS-2807:Resource 'ora.asm' failed to start automatically.
2018-07-02 22:05:44.405
[ohasd(29989)]CRS-2807:Resource 'ora.crsd' failed to start automatically.
2018-07-02 22:05:44.405
[ohasd(29989)]CRS-2807:Resource 'ora.ctssd' failed to start automatically.
2018-07-02 22:05:44.405
[ohasd(29989)]CRS-2807:Resource 'ora.evmd' failed to start automatically.
查看octssd.log
2018-07-02 22:05:42.702: [ CTSS][1805252352]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [3].
2018-07-02 22:05:42.702: [ CTSS][1805252352]ctsscomm_recv_cb4_2: Receive active version change msg. Old active version [186647296] New active version [186647296].
2018-07-02 22:05:42.702: [ CTSS][1805252352]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [2].
2018-07-02 22:05:42.702: [ CTSS][1805252352]ctssslave_msg_handler4_1: Waiting for slave_sync_with_master to finish sync process. sync_state[3].
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm2_3: Received time sync message from master.
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm: sendtime{sec[1530540340], usec[690191]}, receivetime{sec[1530540342], usec[702977]}.
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm: The RTT of sync msg [2012786] is too large for time sync to be accurate. Recommends retry. Returns [17].
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm: Received from master (mode [0x8c] nodenum [1] hostname [raclhr-11gr2-n1] )
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctsselect_monitor_steysync_mode: Failed in clsctssslave_sync_with_master [17]. Retries [0/3].
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm1_1: Waiting for last time sync process to finish. sync_state[6].
2018-07-02 22:05:42.703: [ CTSS][1805252352]ctssslave_msg_handler4_3: slave_sync_with_master finished sync process. Exiting clsctssslave_msg_handler
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm1_2: Ready to initiate new time sync process.
2018-07-02 22:05:42.703: [ CTSS][1798948608]ctssslave_swm2_1: Waiting for time sync message from master. sync_state[2].
2018-07-02 22:05:42.704: [ CTSS][1805252352]ctsscomm_recv_cb2: Receive incoming message event. Msgtype [2].
2018-07-02 22:05:42.704: [ CTSS][1805252352]ctssslave_msg_handler4_1: Waiting for slave_sync_with_master to finish sync process. sync_state[3].
2018-07-02 22:05:42.704: [ CTSS][1798948608]ctssslave_swm2_3: Received time sync message from master.
2018-07-02 22:05:42.704: [ CTSS][1798948608]ctssslave_swm: The magnitude [172752141259 usec] of the offset [172752141259 usec] is larger than [86400000000 usec] sec which is the CTSS limit.
2018-07-02 22:05:42.704: [ CTSS][1798948608]ctsselect_monitor_steysync_mode: Failed in clsctssslave_sync_with_master [12]: Time offset is too much to be corrected
2018-07-02 22:05:42.704: [ CTSS][1805252352]ctssslave_msg_handler4_3: slave_sync_with_master finished sync process. Exiting clsctssslave_msg_handler
2018-07-02 22:05:43.395: [ CTSS][2023593728]ctss_checkcb: clsdm requested check alive. checkcb_data{mode[0xd0], offset[172752141 ms]}, length=[8].
2018-07-02 22:05:43.395: [ CTSS][1798948608]ctsselect_monitor_steysync_mode: CTSS daemon exiting [12].
2018-07-02 22:05:43.395: [ CTSS][1798948608]CTSS daemon aborting
2018-07-02 22:05:44.398: [ CTSS][2023593728]ctss_checkcb: clsdm requested check alive. checkcb_data{mode[0xd0], offset[172752141 ms]}, length=[8].
下面开始修复系统：
将系统时间设定成2018年06月30日的命令如下：
#date -s 06/30/2018
将系统时间设定成下午23点23分06秒的命令如下。
#date -s 22:14:06
然后重启CRS服务：
crsctl stop crs -f
crsctl start crs
然后ctss自动同步时间：
[root@raclhr-11gR2-N2 ctssd]# crsctl stat res -t -init
--------------------------------------------------------------------------------
NAME TARGET STATE SERVER STATE_DETAILS
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.ctssd
1 ONLINE ONLINE raclhr-11gr2-n2 ACTIVE:100
[root@raclhr-11gR2-N2 ctssd]# crsctl stat res -t -init
ora.ctssd
1 ONLINE ONLINE raclhr-11gr2-n2 ACTIVE:0
小麦苗课程
小麦苗课堂开课啦，如下是现有的课程，欢迎咨询小麦苗：
|
课程名称 |
课时 |
上课时间 |
价格 |
|
OCP（从入门到专家） |
每年1期，35课时左右/期 |
20：00-22：00 |
1588(可优惠) |
|
OCM认证 |
每年N期，9课时/期 |
20：00-22：00 |
22888 |
|
高可用课程（rac+dg+ogg） |
每年1期，20课时左右/期 |
20：00-22：00 |
1888(可优惠) |
|
Oracle初级入门 |
每年1期，15课时左右/期 |
20：00-22：00 |
800 |
|
Oracle健康检查脚本 |
可微信或微店购买。 |
88 |
|
|
Oracle数据库技能直通车 |
包含如下3个课程： ①《11g OCP网络课程培训》（面向零基础） 价值1600元 ②《11g OCM网络班课程培训》（Oracle技能合集）价值10000+元 ③《RAC + DG + OGG 高可用网络班课程》 价值2000元 以上3个课程全部打包只要5888，只要5888所有课程带回家，终身指导！所有课程都是在线讲课，不是播放视频，课件全部赠送！ 注意：以上OCP和OCM课程只包括培训课程，不包括考试费用。OCM提供培训+视频，但是不提供练习环境和资料。报名一次，OCP和高可用的课程可以免费终身循环听课。 |
5888 |
|
|
OCP+高可用（rac+dg+ogg） |
报名OCP+高可用课程，可以优惠300元，优惠后的价格为3188. |
3188(可优惠) |
|
注意：
1、每次上课前30分钟答疑。
2、OCM实时答疑，提供和考试一样的练习模拟环境，只要按照老师讲的方式来练习，可以保证100%通过。
3、授课方式：YY语音网络直播讲课（非视频） + QQ互动答疑 + 视频复习。
4、OCP课时可以根据大家学习情况进行增加或缩减。
5、以上所有课程均可循环听课。
6、12c OCM课程私聊。
7、Oracle初级入门课程，只教大家最实用+最常用的Oracle操作维护知识。
8、以上所有课程，可以加小麦苗微信（lhrbestxh）或QQ（646634621）详聊，优惠多多。
|
培训项目 |
连接地址 |
|
DB笔试面试历史连接 |
|
|
OCP培训说明连接 |
|
|
OCM培训说明连接 |
|
|
高可用（RAC+DG+OGG）培训说明连接 |
|
|
OCP最新题库解析历史连接（052） |
|
|
微店地址 |
https://weidian.com/s/793741433?wfr=c&ifr=shopdetail |
About Me
.............................................................................................................................................
● 本文作者：小麦苗，部分内容整理自网络，若有侵权请联系小麦苗删除
● 本文在itpub（http://blog.itpub.net/26736162/abstract/1/）、博客园（http://www.cnblogs.com/lhrbest）和个人微信公众号（xiaomaimiaolhr）上有同步更新
● 本文itpub地址：http://blog.itpub.net/26736162/abstract/1/
● 本文博客园地址：http://www.cnblogs.com/lhrbest
● 本文pdf版、个人简介及小麦苗云盘地址：http://blog.itpub.net/26736162/viewspace-1624453/
● 数据库笔试面试题库及解答：http://blog.itpub.net/26736162/viewspace-2134706/
● DBA宝典今日头条号地址：http://www.toutiao.com/c/user/6401772890/#mid=1564638659405826
.............................................................................................................................................
● QQ群号：230161599（满）、618766405
● 微信群：可加我微信，我拉大家进群，非诚勿扰
● 联系我请加QQ好友（646634621），注明添加缘由
● 于 2018-06-01 06:00 ~ 2018-06-31 24:00 在魔都完成
● 最新修改时间：2018-06-01 06:00 ~ 2018-06-31 24:00
● 文章内容来源于小麦苗的学习笔记，部分整理自网络，若有侵权或不当之处还请谅解
● 版权所有，欢迎分享本文，转载请保留出处
.............................................................................................................................................
● 小麦苗的微店：https://weidian.com/s/793741433?wfr=c&ifr=shopdetail
● 小麦苗出版的数据库类丛书：http://blog.itpub.net/26736162/viewspace-2142121/
● 小麦苗OCP、OCM、高可用网络班：http://blog.itpub.net/26736162/viewspace-2148098/
.............................................................................................................................................
使用微信客户端扫描下面的二维码来关注小麦苗的微信公众号（xiaomaimiaolhr）及QQ群（DBA宝典）、添加小麦苗微信，学习最实用的数据库技术。
小麦苗的微信公众号 小麦苗的DBA宝典QQ群2 小麦苗的微信二维码 小麦苗的微店
.............................................................................................................................................
