原文地址 

由于工作原因，要使用ASP.NET WEBAPI（非mvc webapi），前几天时间一直很紧张，所以webapi一直将就用，今天下午好不容易有时间终于看了下，解决了自己一直疑惑的问题，在此特贴出，给大家分享。

Here’s an overview of how WebAPI binds parameters to an action method.  I’ll describe how parameters can be read, the set of rules that determine which technique is used, and then provide some examples.

[update] Parameter binding is ultimately about taking a HTTP request and converting it into .NET types so that you can have a better action signature. 

The request message has everything about the request, including the incoming URL with query string, content body, headers, etc.  Eg, without parameter binding, every action would have to take the request message and manually extract the parameters, kind of like this:

public object MyAction(HttpRequestMessage request)
{
        // make explicit calls to get parameters from the request object
        int id = int.Parse(request.RequestUri.ParseQueryString().Get("id")); // need error logic!
        Customer c = request.Content.ReadAsAsync<Customer>().Result; // should be async!
        // Now use id and customer
}
  

That’s ugly, error prone, repeats boiler plate code, is missing corner cases, and hard to unit test. You want the action signature to be something more relevant like:

public object MyAction(int id, Customer c) { }

So how does WebAPI convert from a request message into real parameters like id and customer?

Model Binding vs. Formatters

There are 2 techniques for binding parameters: Model Binding and Formatters. In practice, WebAPI uses model binding to read from the query string and Formatters to read from the body. 

(1) Using Model Binding:

ModelBinding is the same concept as in MVC, which has been written about a fair amount (such as here). Basically, there are “ValueProviders” which supply pieces of data such as query string parameters, and then a model binder assembles those pieces into an object.

(2) Using Formatters:

Formatters (see the MediaTypeFormatter class) are just traditional serializers with extra metadata such as the associated content type. WebAPI gets the list of formatters from the HttpConfiguration, and then uses the request’s content-type to select an appropriate formatter. WebAPI has some default formatters. The default JSON formatter is JSON.Net. There is an Xml formatter and a FormUrl formatter that uses JQuery’s syntax.

The key method is MediaTypeFormatter.ReadFromStreayAsync, which looks :

public virtual Task<object> ReadFromStreamAsync(
    Type type, 
    Stream stream, 
    HttpContentHeaders contentHeaders, 
    IFormatterLogger formatterLogger)

Type is the parameter type being read, which is passed to the serializer. Stream is the request’s content stream. The read function then reads the stream, instantiates an object, and returns it.

HttpContentHeaders are just from the request message. IFormatterLogger is a callback interface that a formatter can use to log errors while reading (eg, malformed data for the given type).

Both model binding and formatters support validation and log rich error information.  However, model binding is significantly more flexible.

When do we use which?

Here are the basic rules to determine whether a parameter is read with model binding or a formatter:

1. If the parameter has no attribute on it, then the decision is made purely on the parameter’s .NET type.“Simple types” uses model binding. Complex types uses the formatters. A “simple type” includes:primitives, TimeSpan, DateTime, Guid, Decimal, String, or something with a TypeConverter that converts from strings.
2. You can use a [FromBody] attribute to specify that a parameter should be from the body.
3. You can use a [ModelBinder] attribute on the parameter or the parameter’s type to specify that a parameter should be model bound. This attribute also lets you configure the model binder.  [FromUri] is a derived instance of [ModelBinder] that specifically configures a model binder to only look in the URI.
4. The body can only be read once.  So if you have 2 complex types in the signature, at least one of them must have a [ModelBinder] attribute on it.

It was  a key design goal for these rules to be static and predictable.

Only one thing can read the body

A key difference between MVC and WebAPI is that MVC buffers the content (eg, request body). This means that MVC’s parameter binding can repeatedly search through the body to look for pieces of the parameters. Whereas in WebAPI, the request body (an HttpContent) may be a read-only, infinite, non-buffered, non-rewindable stream.

That means that parameter binding needs to be very careful about not reading the stream unless it’s guaranteeing to bind a parameter.  The action body may want to read the stream directly, and so WebAPI can’t assume that it owns the stream for parameter binding.  Consider this example action:

        // Action saves the request’s content into an Azure blob 
        public Task PostUploadfile(string destinationBlobName)
        {
            // string should come from URL, we’ll read content body ourselves.
            Stream azureStream = OpenAzureStorage(destinationBlobName); // stream to write to azure
            return this.Request.Content.CopyToStream(azureStream); // upload body contents to azure. 
        }

The parameter is a simple type, and so it’s pulled from the query string. Since there are no complex types in the action signature, webAPI never even touches the request content stream, and so the action body can freely read it.

Some examples

Here are some examples of various requests and how they map to action signatures.

/?id=123&name=bob 
void Action(int id, string name) // both parameters are simple types and will come from url

/?id=123&name=bob 
void Action([FromUri] int id, [FromUri] string name) // paranoid version of above.

void Action([FromBody] string name); // explicitly read the body as a string.

public class Customer {   // a complex object 
  public string Name { get; set; } 
  public int Age { get; set; } 
}

/?id=123 
void Action(int id, Customer c) // id from query string, c is a complex object, comes from body via a formatter.

void Action(Customer c1, Customer c2) // error! multiple parameters attempting to read from the body

void Action([FromUri] Customer c1, Customer c2) // ok, c1 is from the URI and c2 is from the body

void Action([ModelBinder(MyCustomBinder)] SomeType c) // Specifies a precise model binder to use to create the parameter.

[ModelBinder(MyCustomBinder)] public class SomeType { } // place attribute on type declaration to apply to all parameter instances 
void Action(SomeType c) // attribute on c’s declaration means it uses model binding.

Differences with MVC

Here are some differences between MVC and WebAPI’s parameter binding:

1. MVC only had model binders and no formatters. That’s because MVC would model bind over the request’s body (which it commonly expected to just be FormUrl encoded), whereas WebAPI uses a serializer over the request’s body.
2. MVC buffered the request body, and so could easily feed it into model binding. WebAPI does not buffer the request body, and so does not model bind against the request body by default.
3. WebAPI’s binding can be determined entirely statically based off the action signature types. For example, in WebAPI, you know statically whether a parameter will bind against the body or the query string. Whereas in MVC, the model binding system would search both body and query string.

webapi是如何绑定参数的（How WebAPI does Parameter Binding）,布布扣,bubuko.com

webapi是如何绑定参数的（How WebAPI does Parameter Binding）