前提说明：
此篇文章主要讲解，如何发布类似于网址 https://killaznft.com/ 或者 https://thesevensofficial.com/
这种基于项目方的NFT，进行网页售卖以及上架到OpenSea上进行展示和售卖的过程。对技术感兴趣可以添加文章最后的群二维码一起交流学习。
此文章为原创，请勿转载。已经基于火币heco-nft生成为NFT进行确权，地址为：https://hecoinfo.com/tx/0x152a5ae4268185fdb66862152e3b48a7f50566cf83d48a90009e9e1523eb8c9f
以下是上述项目的截图：
开始教程
我们将以发布一张图片作为NFT盲盒，上传到opensea并售卖作为流程，演示如何发布NFT。
包括三个步骤：1 前提讲解 2 开始部署 3 开始网页售卖 4 开始上架OpenSea 5 解开盲盒与 OpenSea购买与售卖
以下内容均在测试网上进行部署：
1.前提讲解：
两种方式都可以实现：
第一种： 基于opensea直接发布——此种方式代表NFT的生成和管理，均被opensea后台默认的NFT管理合约进行管理，此种方式部署的NFT，不灵活，无法灵活配置自己的项目。
第二种： 自己发布NFT合约间接发布——使用自己的NFT合约生成NFT，导入opensea然后进行售卖。
2.开始部署：
第一种方式： 直接部署参考网址 https://blog.csdn.net/weixin_54594070/article/details/115007248
第二种方式： 合约部署方式如下
① 编写NFT合约如下
/**
*Submitted for verification at Etherscan.io on 2021-08-18
*/
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts may inherit from this and call {_registerInterface} to declare
* their support of an interface.
*/
abstract contract ERC165 is IERC165 {
/*
* bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
*/
bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;
/**
* @dev Mapping of interface ids to whether or not it's supported.
*/
mapping(bytes4 => bool) private _supportedInterfaces;
constructor () internal {
// Derived contracts need only register support for their own interfaces,
// we register support for ERC165 itself here
_registerInterface(_INTERFACE_ID_ERC165);
}
/**
* @dev See {IERC165-supportsInterface}.
*
* Time complexity O(1), guaranteed to always use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return _supportedInterfaces[interfaceId];
}
/**
* @dev Registers the contract as an implementer of the interface defined by
* `interfaceId`. Support of the actual ERC165 interface is automatic and
* registering its interface id is not required.
*
* See {IERC165-supportsInterface}.
*
* Requirements:
*
* - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
*/
function _registerInterface(bytes4 interfaceId) internal virtual {
require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
_supportedInterfaces[interfaceId] = true;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
/**
* @dev Library for managing an enumerable variant of Solidity's
* https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
* type.
*
* Maps have the following properties:
*
* - Entries are added, removed, and checked for existence in constant time
* (O(1)).
* - Entries are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableMap for EnumerableMap.UintToAddressMap;
*
* // Declare a set state variable
* EnumerableMap.UintToAddressMap private myMap;
* }
* ```
*
* As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
* supported.
*/
library EnumerableMap {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Map type with
// bytes32 keys and values.
// The Map implementation uses private functions, and user-facing
// implementations (such as Uint256ToAddressMap) are just wrappers around
// the underlying Map.
// This means that we can only create new EnumerableMaps for types that fit
// in bytes32.
struct MapEntry {
bytes32 _key;
bytes32 _value;
}
struct Map {
// Storage of map keys and values
MapEntry[] _entries;
// Position of the entry defined by a key in the `entries` array, plus 1
// because index 0 means a key is not in the map.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) { // Equivalent to !contains(map, key)
map._entries.push(MapEntry({ _key: key, _value: value }));
// The entry is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
map._indexes[key] = map._entries.length;
return true;
} else {
map._entries[keyIndex - 1]._value = value;
return false;
}
}
/**
* @dev Removes a key-value pair from a map. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function _remove(Map storage map, bytes32 key) private returns (bool) {
// We read and store the key's index to prevent multiple reads from the same storage slot
uint256 keyIndex = map._indexes[key];
if (keyIndex != 0) { // Equivalent to contains(map, key)
// To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
// in the array, and then remove the last entry (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = keyIndex - 1;
uint256 lastIndex = map._entries.length - 1;
// When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
MapEntry storage lastEntry = map._entries[lastIndex];
// Move the last entry to the index where the entry to delete is
map._entries[toDeleteIndex] = lastEntry;
// Update the index for the moved entry
map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved entry was stored
map._entries.pop();
// Delete the index for the deleted slot
delete map._indexes[key];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function _contains(Map storage map, bytes32 key) private view returns (bool) {
return map._indexes[key] != 0;
}
/**
* @dev Returns the number of key-value pairs in the map. O(1).
*/
function _length(Map storage map) private view returns (uint256) {
return map._entries.length;
}
/**
* @dev Returns the key-value pair stored at position `index` in the map. O(1).
*
* Note that there are no guarantees on the ordering of entries inside the
* array, and it may change when more entries are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
require(map._entries.length > index, "EnumerableMap: index out of bounds");
MapEntry storage entry = map._entries[index];
return (entry._key, entry._value);
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*/
function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
uint256 keyIndex = map._indexes[key];
if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function _get(Map storage map, bytes32 key) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
/**
* @dev Same as {_get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {_tryGet}.
*/
function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
uint256 keyIndex = map._indexes[key];
require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
return map._entries[keyIndex - 1]._value; // All indexes are 1-based
}
// UintToAddressMap
struct UintToAddressMap {
Map _inner;
}
/**
* @dev Adds a key-value pair to a map, or updates the value for an existing
* key. O(1).
*
* Returns true if the key was added to the map, that is if it was not
* already present.
*/
function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the key was removed from the map, that is if it was present.
*/
function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
return _remove(map._inner, bytes32(key));
}
/**
* @dev Returns true if the key is in the map. O(1).
*/
function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
return _contains(map._inner, bytes32(key));
}
/**
* @dev Returns the number of elements in the map. O(1).
*/
function length(UintToAddressMap storage map) internal view returns (uint256) {
return _length(map._inner);
}
/**
* @dev Returns the element stored at position `index` in the set. O(1).
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
(bytes32 key, bytes32 value) = _at(map._inner, index);
return (uint256(key), address(uint160(uint256(value))));
}
/**
* @dev Tries to returns the value associated with `key`. O(1).
* Does not revert if `key` is not in the map.
*
* _Available since v3.4._
*/
function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
(bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
return (success, address(uint160(uint256(value))));
}
/**
* @dev Returns the value associated with `key`. O(1).
*
* Requirements:
*
* - `key` must be in the map.
*/
function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key)))));
}
/**
* @dev Same as {get}, with a custom error message when `key` is not in the map.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryGet}.
*/
function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
}
}
/**
* @dev String operations.
*/
library Strings {
/**
* @dev Converts a `uint256` to its ASCII `string` representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
uint256 index = digits - 1;
temp = value;
while (temp != 0) {
buffer[index--] = bytes1(uint8(48 + temp % 10));
temp /= 10;
}
return string(buffer);
}
}
/**
* @title ERC721 Non-Fungible Token Standard basic implementation
* @dev see https://eips.ethereum.org/EIPS/eip-721
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using SafeMath for uint256;
using Address for address;
using EnumerableSet for EnumerableSet.UintSet;
using EnumerableMap for EnumerableMap.UintToAddressMap;
using Strings for uint256;
// Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
// which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;
// Mapping from holder address to their (enumerable) set of owned tokens
mapping (address => EnumerableSet.UintSet) private _holderTokens;
// Enumerable mapping from token ids to their owners
EnumerableMap.UintToAddressMap private _tokenOwners;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Optional mapping for token URIs
mapping (uint256 => string) private _tokenURIs;
// Base URI
string private _baseURI;
/*
* bytes4(keccak256('balanceOf(address)')) == 0x70a08231
* bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
* bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
* bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
* bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
* bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
* bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
* bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
* bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
*
* => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
* 0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
*/
bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;
/*
* bytes4(keccak256('name()')) == 0x06fdde03
* bytes4(keccak256('symbol()')) == 0x95d89b41
* bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
*
* => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
*/
bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;
/*
* bytes4(keccak256('totalSupply()')) == 0x18160ddd
* bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
* bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
*
* => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
*/
bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
// register the supported interfaces to conform to ERC721 via ERC165
_registerInterface(_INTERFACE_ID_ERC721);
_registerInterface(_INTERFACE_ID_ERC721_METADATA);
_registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _holderTokens[owner].length();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI, '.json'));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, (tokenId.toString()),".txt"));
}
/**
* @dev Returns the base URI set via {_setBaseURI}. This will be
* automatically added as a prefix in {tokenURI} to each token's URI, or
* to the token ID if no specific URI is set for that token ID.
*/
function baseURI() public view virtual returns (string memory) {
return _baseURI;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
return _holderTokens[owner].at(index);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
// _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
return _tokenOwners.length();
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
(uint256 tokenId, ) = _tokenOwners.at(index);
return tokenId;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _tokenOwners.contains(tokenId);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
d*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId); // internal owner
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
// Clear metadata (if any)
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
_holderTokens[owner].remove(tokenId);
_tokenOwners.remove(tokenId);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_holderTokens[from].remove(tokenId);
_holderTokens[to].add(tokenId);
_tokenOwners.set(tokenId, to);
emit Transfer(from, to, tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Internal function to set the base URI for all token IDs. It is
* automatically added as a prefix to the value returned in {tokenURI},
* or to the token ID if {tokenURI} is empty.
*/
function _setBaseURI(string memory baseURI_) internal virtual {
_baseURI = baseURI_;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (!to.isContract()) {
return true;
}
bytes memory returndata = to.functionCall(abi.encodeWithSelector(
IERC721Receiver(to).onERC721Received.selector,
_msgSender(),
from,
tokenId,
_data
), "ERC721: transfer to non ERC721Receiver implementer");
bytes4 retval = abi.decode(returndata, (bytes4));
return (retval == _ERC721_RECEIVED);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract KILLAz is ERC721, Ownable {
using SafeMath for uint256;
uint256 public immutable pricePerKILLA;
uint256 public immutable maxPerTx;
uint256 public immutable maxKILLAz;
bool public isSaleActive;
address private immutable reserveAddress;
constructor(address _reserveAddress)
public
ERC721("KILLAz", "Kz")
{
pricePerKILLA = 0.029 * 10 ** 18;
maxPerTx = 20;
maxKILLAz = 9971;
reserveAddress = _reserveAddress;
}
function flipSaleState() public onlyOwner {
isSaleActive = !isSaleActive;
}
function setBaseURI(string memory baseURI) public onlyOwner {
_setBaseURI(baseURI);
}
function reserveKILLAz() public onlyOwner {
require(totalSupply() < 100);
for (uint256 i = 0; i < 50; i++) {
uint256 mintIndex = totalSupply();
_safeMint(reserveAddress, mintIndex);
}
}
function mintKILLAz(uint256 numberOfTokens) public payable {
require(isSaleActive, "Sale is not active");
require(numberOfTokens <= maxPerTx, "No more than 20 tokens per transaction");
require(totalSupply().add(numberOfTokens) <= maxKILLAz, "Purchase would exceed max supply of KILLAz");
require(pricePerKILLA.mul(numberOfTokens) == msg.value, "Ether value is not correct");
payable(owner()).transfer(msg.value);
for (uint256 i = 0; i < numberOfTokens; i++) {
uint256 mintIndex = totalSupply();
if (totalSupply() < maxKILLAz) {
_safeMint(msg.sender, mintIndex);
}
}
}
}② 打开remix发布合约：https://remix.ethereum.org/ 输入网页售卖的收款地址并发布
③ 注册腾讯云，并开启腾讯云COS文件存储，并创建存储桶。
④ 上传一张图片到存储桶，生成图片的Url链接 https://nft-buc-1302315235.cos.ap-beijing.myqcloud.com/pic0/10.jpeg
访问该链接可以访问到图片。
⑤ 新建txt文档，文档中存储构造符合OpenSea标准的NFT 元数据（元数据中保存了图片的url），如下：
{"attributes":[{"trait_type":"Background","value":"Fire"},{"trait_type":"Body","value":"Droid"},{"trait_type":"Weapon","value":"RPG"},{"trait_type":"Clothing","value":"None"},{"trait_type":"Mask","value":"None"},{"trait_type":"Primary Accessory","value":"Prayer Beads"},{"trait_type":"Secondary Accessory","value":"None"}],"name":"killaz #10","image":"https://nft-buc-1302315235.cos.ap-beijing.myqcloud.com/pic0/10.jpeg"}⑥ 上传第五步新建的txt文档到存储桶，成功后url是 https://nft-buc-1302315235.cos.ap-beijing.myqcloud.com/txt0/10.txt
⑦ 开源合约。 开源成功后地址是 https://rinkeby.etherscan.io/address/0xA5b3628207a774Ac3260948eA285D5D2320cF7ba#codehttps://rinkeby.etherscan.io/address/
⑧ 打开售卖函数，调用mintKILLAZ函数。https://rinkeby.etherscan.io/address/0xA5b3628207a774Ac3260948eA285D5D2320cF7ba#writeContract
⑨ 设置baseUri 也就是上传txt描述文件的前缀
⑩导入opensea，查看我们发布的NFT，拷贝合约地址到https://testnets.opensea.io/get-listed/step-two 即 0xA5b3628207a774Ac3260948eA285D5D2320cF7ba到opensea
导入后可以再opensea看到你发布的项目：
⑩① 开始售卖。 选择一个点击sell
⑩② 重复上边修改上传图片和txt到存储桶的过程，即可修改盲盒图片进行解封。再开发一个网页进行售卖，即可完成开头讲的类似于网页售卖，opensea展示等。
教程延申：
上述过程太过复杂和难以维护，如果要方便维护，可以做一个后台管理系统，类似于本人开发的
然后结合网页，就可以做成 KILLAz 这种平台。
对技术感兴趣的可以加群交流，或者私聊我，qq：916968320