从ArcGIS中导出的户型图是按层分开放置的,现根据要求将按户合并一起,原计划编写lisp的,但一直没有搞懂同时怎样操作多个文件,最终放弃了
VBA在Excel中很好用,但在CAD中的缺点较多,主要不太稳定,至于运行速度...数据实在多就慢慢等吧
本次程序很乱,算法也很菜,且未多做标注,还好完美运行。其实记录下来主要是调试了很久,才搞定的多个图互相复制图形功能,下次使用可以照搬。
Sub HBall() Dim filepath As String filepath = "" Dim fhtx() As String Dim js As Long, aa As Integer, yn As Boolean js = 2 yn = False filepath = InputBox("请输入处理的数据所在文件夹" & vbCr & "(格式 D:\test\test ):", "文件夹输入") If filepath = "" Then Exit Sub End If Dim MyFile As Object On Error Resume Next Set MyFile = CreateObject("Scripting.FileSystemObject") Set xlapp = CreateObject("Excel.Application") Set wkb = xlapp.Workbooks.Open(filepath & "\户型表格信息.xlsm") xlapp.Visible = True xlapp.StatusBar = False Dim bdcdyh As String For js = 2 To wkb.sheets(1).usedrange.Rows.Count ReDim fhtx(0 To UBound(Split(wkb.sheets(1).cells(js, 4), ","))) fhtx = Split(wkb.sheets(1).cells(js, 4), ",") If UBound(fhtx) < 1 Then If Dir(filepath & "\户型图old\" & wkb.sheets(1).cells(js, 4) & ".dwg", 16) <> Empty Then MyFile.CopyFile filepath & "\户型图old\" & fhtx(0) & ".dwg", filepath & "\户型图ok\" Name filepath & "\户型图ok\" & wkb.sheets(1).cells(js, 4) & ".dwg" As filepath & "\户型图ok\" & wkb.sheets(1).cells(js, 1) & ".dwg" 'Name filepath & "\户型图old\" & wkb.sheets(1).cells(js, 4) & ".dwg" As filepath & "\户型图ok\" & wkb.sheets(1).cells(js, 4) & ".dwg" Else wkb.sheets(1).cells(js, 5) = "有未找到文件!" End If Else For aa = 0 To UBound(fhtx) If Dir(filepath & "\户型图old\" & fhtx(aa) & ".dwg", 16) = Empty Then wkb.sheets(1).cells(js, 5) = "有未找到文件!" yn = True Exit For End If Next If UBound(fhtx) > 5 Then wkb.sheets(1).cells(js, 5) = "超过6个,请补充6个以上!" End If If yn = False Then bdcdyh = wkb.sheets(1).cells(js, 1).Value Call FHTHB(fhtx, filepath, bdcdyh) End If End If yn = False xlapp.StatusBar = "程序运行进度: " & Round(js / wkb.sheets(1).usedrange.Rows.Count, 4) * 100 & "%" Next Set MyFile = Nothing Set wkb = Nothing Set xlapp = Nothing MsgBox ("完成数据处理!") xlapp.StatusBar = "" xlapp.StatusBar = False End Sub Sub FHTHB(ByRef hx() As String, filepath1 As String, bdcdyh1 As String) Dim xg1, xg2 As Double Dim tx1pt(0 To 2) As Double, tx2pt(0 To 2) As Double Dim fwpt_A(0 To 5) As Double, fwpt_B(0 To 5) As Double Dim aa, bb As Integer bb = 0 Dim retObjects As Variant Dim ttt() As Object Dim SSet As AcadSelectionSet Dim Ft(0) As Integer, Fd(0) Ft(0) = 8: Fd(0) = "0" For aa = 0 To 5 fwpt_A(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(0) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_A(), 1) If UBound(hx) = 1 Then ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''2 For aa = 0 To 5 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(1) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) tx1pt(1) = fwpt_A(3) - (fwpt_A(5) - fwpt_A(1)) * 1.2 tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents Else For aa = 0 To 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''2 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(1) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) + (fwpt_A(4) - fwpt_A(0)) * 1.2 tx1pt(1) = fwpt_A(3) tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents For aa = 0 To 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''3 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(2) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) tx1pt(1) = fwpt_A(3) - (fwpt_A(5) - fwpt_A(1)) * 1.2 tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents If UBound(hx) > 2 Then For aa = 0 To 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''4 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(3) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) + (fwpt_A(4) - fwpt_A(0)) * 1.2 tx1pt(1) = fwpt_A(3) - (fwpt_A(5) - fwpt_A(1)) * 1.2 tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents End If If UBound(hx) > 3 Then For aa = 0 To 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''5 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(4) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) tx1pt(1) = fwpt_A(3) - (fwpt_A(5) - fwpt_A(1)) * 2.4 tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents End If If UBound(hx) > 4 Then For aa = 0 To 5 ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''6 fwpt_B(aa) = -9000000 Next ThisDrawing.Application.Documents.Open filepath1 & "\户型图old\" & hx(5) & ".dwg" ThisDrawing.Application.ZoomExtents Call Getall(fwpt_B(), 2) tx1pt(0) = fwpt_A(2) + (fwpt_A(4) - fwpt_A(0)) * 1.2 tx1pt(1) = fwpt_A(3) - (fwpt_A(5) - fwpt_A(1)) * 2.4 tx1pt(2) = 0 tx2pt(0) = fwpt_B(2) tx2pt(1) = fwpt_B(3) tx2pt(2) = 0 Set SSet = ThisDrawing.Application.Documents(2).SelectionSets.Add(ThisDrawing.Application.Documents(2).Name) SSet.Select acSelectionSetAll ', , , Ft, Fd ReDim ttt(0 To SSet.Count - 1) bb = 0 For Each ent In SSet Set ttt(bb) = ent ttt(bb).Move tx2pt, tx1pt bb = bb + 1 Next retObjects = ThisDrawing.Application.Documents(2).CopyObjects(ttt, ThisDrawing.Application.Documents(1).ModelSpace) ThisDrawing.Application.Documents(2).Close False ThisDrawing.Application.ZoomExtents End If End If 'ThisDrawing.Application.Documents(1).TextStyles.Item(0).fontFile = "C:\Windows\Fonts\simhei.ttf" ThisDrawing.Application.Documents(1).SaveAs filepath1 & "\户型图ok\" & bdcdyh1 & ".dwg" ThisDrawing.Application.Documents(1).Close False End Sub Sub Getall(ByRef fwpt() As Double, a As Integer) Dim ent As AcadEntity Dim line As AcadLine For Each ent In ThisDrawing.Application.Documents(a).ModelSpace If TypeOf ent Is AcadLine Then '''''''''颜色 Set line = ent If fwpt(0) = -9000000 Then If line.StartPoint(0) < line.EndPoint(0) Then fwpt(0) = line.StartPoint(0) fwpt(4) = line.EndPoint(0) Else fwpt(0) = line.EndPoint(0) fwpt(4) = line.StartPoint(0) End If If line.StartPoint(1) < line.EndPoint(1) Then fwpt(1) = line.StartPoint(1) fwpt(5) = line.EndPoint(1) Else fwpt(1) = line.EndPoint(1) fwpt(5) = line.StartPoint(1) End If Else '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' If fwpt(0) > line.StartPoint(0) Then fwpt(0) = line.StartPoint(0) ElseIf fwpt(4) < line.StartPoint(0) Then fwpt(4) = line.StartPoint(0) End If If fwpt(0) > line.EndPoint(0) Then fwpt(0) = line.EndPoint(0) ElseIf fwpt(4) < line.EndPoint(0) Then fwpt(4) = line.EndPoint(0) End If If fwpt(1) > line.StartPoint(1) Then fwpt(1) = line.StartPoint(1) ElseIf fwpt(5) < line.StartPoint(1) Then fwpt(5) = line.StartPoint(1) End If If fwpt(1) > line.EndPoint(1) Then fwpt(1) = line.EndPoint(1) ElseIf fwpt(5) < line.EndPoint(1) Then fwpt(5) = line.EndPoint(1) End If End If End If Next ent fwpt(2) = (fwpt(0) + fwpt(4)) / 2 fwpt(3) = (fwpt(1) + fwpt(5)) / 2 End Sub