零、Vagrant环境
PS E:\vagrant\prometheus> dir
目录: E:\vagrant\prometheus
Mode LastWriteTime Length Name
---- ------------- ------ ----
d----- 2021/8/1 12:24 .vagrant
d----- 2021/5/31 15:37 mysqld_exporter
-a---- 2021/8/1 22:04 3798472 golang-github-prometheus-node_exporter-0.18.1-6.el7.x86_64.rpm
-a---- 2021/8/2 0:39 129 grafana_start.sh
-a---- 2021/8/1 17:53 266 mysql.sql
-a---- 2021/8/1 19:49 7242382 mysqld_exporter-0.13.0.linux-amd64.tar.gz
-a---- 2021/8/1 20:34 162 mysqld_exporter_start_deamon.sh
-a---- 2021/8/1 23:50 1102 prometheus.yml
-a---- 2021/8/1 17:58 118 prometheus_start.sh
-a---- 2021/8/1 23:52 4668 Vagrantfile
目录: E:\vagrant\prometheus\mysqld_exporter
Mode LastWriteTime Length Name
---- ------------- ------ ----
-a---- 2021/5/31 15:36 11357 LICENSE
-a---- 2021/5/31 15:30 14955898 mysqld_exporter
-a---- 2021/5/31 15:36 65 NOTICE
一、Vagrant
file: Vagrant
# -*- mode: ruby -*-
# vi: set ft=ruby :
# All Vagrant configuration is done below. The "2" in Vagrant.configure
# configures the configuration version (we support older styles for
# backwards compatibility). Please don't change it unless you know what
# you're doing.
Vagrant.configure("2") do |config|
# The most common configuration options are documented and commented below.
# For a complete reference, please see the online documentation at
# https://docs.vagrantup.com.
# Every Vagrant development environment requires a box. You can search for
# boxes at https://vagrantcloud.com/search.
config.vm.box = "centos/7"
config.vm.hostname = "prometheus"
# Disable automatic box update checking. If you disable this, then
# boxes will only be checked for updates when the user runs
# `vagrant box outdated`. This is not recommended.
# config.vm.box_check_update = false
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine. In the example below,
# accessing "localhost:8080" will access port 80 on the guest machine.
# NOTE: This will enable public access to the opened port
# config.vm.network "forwarded_port", guest: 80, host: 8080
# Create a forwarded port mapping which allows access to a specific port
# within the machine from a port on the host machine and only allow access
# via 127.0.0.1 to disable public access
# config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
# Create a private network, which allows host-only access to the machine
# using a specific IP.
# config.vm.network "private_network", ip: "192.168.33.10"
# Create a public network, which generally matched to bridged network.
# Bridged networks make the machine appear as another physical device on
# your network.
config.vm.network "public_network", ip: "192.168.1.13", bridge: "Intel(R) Wi-Fi 6 AX200 160MHz"
# Share an additional folder to the guest VM. The first argument is
# the path on the host to the actual folder. The second argument is
# the path on the guest to mount the folder. And the optional third
# argument is a set of non-required options.
# config.vm.synced_folder "../data", "/vagrant_data"
# Provider-specific configuration so you can fine-tune various
# backing providers for Vagrant. These expose provider-specific options.
# Example for VirtualBox:
#
config.vm.provider "virtualbox" do |vb|
# Display the VirtualBox GUI when booting the machine
vb.gui = false
# Customize the amount of memory on the VM:
vb.memory = "4096"
vb.cpus = "4"
end
#
# View the documentation for the provider you are using for more
# information on available options.
# Enable provisioning with a shell script. Additional provisioners such as
# Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
# documentation for more information about their specific syntax and use.
config.vm.provision "shell", inline: <<-SHELL
# 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
# 关闭selinux
sed -i 's/enforcing/disabled/' /etc/selinux/config # 永久
setenforce 0 # 临时
# 安装docker
yum install -y docker vim wget
systemctl enable docker
systemctl start docker
# 拉取相关镜像
# docker pull mysql
# docker pull prom/prometheus
# docker pull prom/mysqld-exporter
# docker pull grafana/grafana
# 1、node_exporter：
# 链接：https://github.com/prometheus/node_exporter#rhelcentosfedora
# 使用yum安装
# curl -Lo /etc/yum.repos.d/_copr_ibotty-prometheus-exporters.repo https://copr.fedorainfracloud.org/coprs/ibotty/prometheus-exporters/repo/epel-7/ibotty-prometheus-exporters-epel-7.repo
# yum -y install node_exporter
# 使用rpm安装
rpm -ivh /vagrant/golang-github-prometheus-node_exporter-0.18.1-6.el7.x86_64.rpm
# 启动node_exporter
systemctl enable node_exporter
systemctl start node_exporter
# 2、MySQL8
# 安装 & 启动
rpm -ivh https://repo.mysql.com//mysql80-community-release-el7-3.noarch.rpm
yum install -y mysql-community-server
systemctl enable mysqld
systemctl start mysqld
# 3、mysqld_exporter
# 下载到/home/vagrant
# wget https://github.com/prometheus/mysqld_exporter/releases/download/v0.13.0/mysqld_exporter-0.13.0.linux-amd64.tar.gz
SHELL
end
二、node_exporter
注：已经设置开机启动
https://prometheus.io/download/
https://github.com/prometheus/node_exporter
三、MySQL8
注：已经设置开机启动
# 查找mysql初始密码
$ sudo grep 'temporary password' /var/log/mysqld.log
四、mysqld_exporter
https://prometheus.io/download/
https://github.com/prometheus/mysqld_exporter
# 使用初始密码登录
mysql -uroot -p$PASSWORD
file: mysql.sql
SET GLOBAL validate_password.policy=LOW;
ALTER USER 'root'@'localhost' IDENTIFIED BY 'redhat.com';
CREATE USER 'exporter'@'localhost' IDENTIFIED BY 'XXXXXXXX' WITH MAX_USER_CONNECTIONS 3;
GRANT PROCESS, REPLICATION CLIENT, SELECT ON *.* TO 'exporter'@'localhost';
file: mysqld_exporter_start_deamon.sh
export DATA_SOURCE_NAME='exporter:XXXXXXXX@(prometheus:3306)/'
chmod u+x /vagrant/mysqld_exporter/mysqld_exporter
nohup /vagrant/mysqld_exporter/mysqld_exporter &
五、Prometheus
https://github.com/prometheus/prometheus
https://prometheus.io/docs/prometheus/latest/installation/
file: prometheus.yml
# my global config
global:
scrape_interval: 15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
# scrape_timeout is set to the global default (10s).
# Alertmanager configuration
alerting:
alertmanagers:
- static_configs:
- targets:
# - alertmanager:9093
# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
rule_files:
# - "first_rules.yml"
# - "second_rules.yml"
# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
# The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
- job_name: 'prometheus'
# metrics_path defaults to '/metrics'
# scheme defaults to 'http'.
static_configs:
- targets: ['192.168.1.13:9090']
- job_name: 'agent_node'
static_configs:
- targets: ['192.168.1.13:9100']
- job_name: 'agent_mysql8'
static_configs:
- targets: ['192.168.1.13:9104']
file: prometheus_start.sh
docker run -d \
-p 9090:9090 \
-v /vagrant/prometheus.yml:/etc/prometheus/prometheus.yml \
prom/prometheus
六、Grafana
https://grafana.com/docs/grafana/latest/installation/docker/
file: grafana_start.sh
docker run -d \
-p 3000:3000 \
-e "GF_INSTALL_PLUGINS=grafana-clock-panel,grafana-simple-json-datasource" \
grafana/grafana
配置操作
- 添加prometheus数据源
- 添加 https://grafana.com/grafana/dashboards/7362
- 添加 https://grafana.com/grafana/dashboards/5984
- 添加 https://grafana.com/grafana/dashboards/10180