What is DTS-monaco?

DTS monaco software is development by Mercedes Benz manufacturers ,all car data one click scan and save. Data can be directly change the underlying data, the module used directly copied data replacement. Automatic programming, can automatically set code completely out of online operation.

 

DTS-monaco newest version:

V8.14.016

 

DTS-monaco introduction：

1.DTS-monaco is the official software used by Daimler Benz development engineers

2.DTS Monaco is universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic

3.DTS Monaco covers all the tasks in the field of engineering, testing and production test preparation

4.When Mercedes-Benz maintenance test it is the greatest authority，the perfect support for C4（SDconnect) and (Ecom) Hardware(at present, Das-xentry.Vediamo lower authority)

 

DTS-monaco special feature:

1.Quick Test；Entire vehicle ECU quick test, and the test can choose to edit more

2.Variant Coding； Coding with variation add VO- delete VO function

3.ID identification ； One click to read the whole car and save all modules programmed numbers

4.Complete Variant Coding； One time to read all the ECU coding vehicle data, can be written to the vehicle again, completely off-line operation

5.Diagnostic Services； Advanced features can see your choice of internal and external data module, turn on the computer authorization(not driving license), Activate ECU, reset ECU, modifying the original chassis number

6.Flash programming； Fully offline programming

7.Diagnostic Trouble Code； Diagnostic module DTC fault code

8.ECU Exchange； Two of the same ECU, by reading data import data exchange

9.Symbolic trace： Record and track the file, after repeated viewing, analysis of fault logic point

 

Where to download DTS Monaco for free?

https://mega.nz/#!p9ZDGKwS!VTn9fB80Z9-YKpV8aj9PkRXR3KinAT6RFiW13GGdOHI

It’s free but with unknown security.

 

How to install DTS Monaco on Windows 7?

When installing DTS Monaco to communicates and works with SD connect c4 all user installed SDconnect Toolkit version 2.1.3. And no one tried to force the work SDconnect Toolkit version 2.1.4.2, which is installed together with the installation of Setup_Addon_DAG. And I did it.

 

Checked only on the system without DAS/Xentry.

 

DTS Monaco 8.03.12.

 

Windows 7 x64.

 

Follow the next steps:

1.Install Monaco

2.Install Setup_Addon_DAG

3.Go to С:\ProgramData\I+ME ACTIA\Toolkit\

4.Open and edit toolkit.ini

 

Code:

 

ShowInTray=2

NetworkIcon=2

DeviceIcon=1

ConnectionState=1

 

 

1.Save file and reboot Windows

2.Connect SDconnect MUX via cable

3.Start System Configurator

4.Go to Licenses and you will see your MUX as DCDIPartW with your serial number. After editing in Interfaces type of MUX will change to MVCI_IME_ACTIA_GmbH_SDconnect

9.Go toInterfaces

 

Code:

 

eCOM_SMR

Interface name – > SDconnect_SMR

Bus system interface – > D-PDU API

D-PDU API version – > I+ME ACTIA GmbHXS_D_PDU_API_FOR_DTS_8_03_12

Module type – > MVCI_IME_ACTIA_GmbH_SDconnect

Cable – > CABLE_OBDII_SDCONNECT

Physical links: CAN1, CAN4, CAN8

 

1.Click Save and close System Configurator

2.Now you can connect to the car or single ECU

 

Where to get DTS-monaco confirmed to work?

 

Why do you need DTS-monaco?

Areas of Application

■Development of diagnostic and control functions for ECUs

■Function test and validation

■Integration and system test

■Preparation of test sequences for Manufacturing and Service

■Analysis of returns and Quality Assurance

 

Flexibly Adaptable to the Relevant Task

DTS Monaco is part of the Diagnostic Tool Set product family and is based on the DTS Base System. Monaco stands for Modular Analyzer for Vehicle Communication. A clearly laid out start page enables simple and fast access to the functions required most frequently. The actual workspace is divided into two: one area with a fixed layout and one with layouts that you can toggle between. A status display below shows communication server messages. The various functions are realized using special, configurable interface elements. These “HMI Controls” can be arranged freely in the layouts in configuration mode and comprehensively configured.

 

Early Detection of Problems and Errors

In execution mode, a configured workspace can be “started”. In doing so individual functions can be started automatically and communication can be established in advance if so required. Self-generated test sequences enable both simple and very complex function tests. This makes it possible to detect, and remedy, communication problems and function errors at an early stage. Communication data and test results can be documented in entirety in the process.

 

Fast Results

For typical use scenarios predefined templates including an universal database for the OBD self-diagnosis as well as various protocol templates (WWH-OBD, J1939-73 among others) are supplied. In Demonstration mode, all functions can be tested, even without an interface and a license, using a detailed example including simulation. Furthermore, the tool has a completely integrated OTX runtime for running complex test sequences in accordance with ISO 13209. An authoring tool for creating such OTX sequences can be started directly from DTS Monaco.

 

What’s the difference between DTS-monaco and Vediamo?

DTS and Vediamo difference
Function	DTS	Vediamo
entire vehicle setting code one-click save	yes	no
entire vehicle control unit software number one-click save	yes	no
read entire vehicle fault code	yes	no
data exchange	yes	no
quick test	yes	no
single control unit one-click setting code offline	yes	no
Offline programming	yes	yes
Increase or decrease SA code	yes	yes
Personalized settings control unit parameters	yes	yes

 

Feedback of DTS Monaco:

I successfully connected to ZGW221 w/o car

DTS Monaco always sends a notification that it is impossible to contact the EIS221 to read the mileage, voltage, etc. (because w/o car)

(more reviews will be updated here…)