前面做过很多次尝试，编译也通过了，但是去掉了很多glob和crypto的函数，导致运行的时候还是会出错，所以，本次按照正常方法，加全所有的函数，然后编译之后运行。
1)在工作目录下建立build目录
2)准备文件，
a) 下载openssl，wget wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar
b) 下载nginx,wget http://nginx.org/download/nginx-1.5.9.tar.gz
c) 下载pcre,wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.34.tar.gz
d) 下载zlib,wget http://www.zlib.net/zlib-1.2.8.tar.gz
e) 下载下载nginx_mod_h264,wget http://h264.code-shop.com/download/nginx_mod_h264_streaming-2.2.7.tar.gz
f) 下载rtmp模组，git clone https://github.com/arut/nginx-rtmp-module
3) 编译openssl
a) tar tar xvf openssl-1.0.1f.tar.gz
b) cd openssl-1.0.1f
c) 使用如下的配置文件
--------------------------------my_configure_openssl.sh start here-----------------------------------------
#!/bin/sh
./config no-asm shared \
--prefix=/home/zangcf/nginx_ndk/build \
--------------------------------my_configure_openssl.sh end here-----------------------------------------
d) gedit Makefile，进入修改Makefile
the first step) 找到所有的-m64，删除
the sencond step)找到CC= gcc，替换为CC= /opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc
the third step)找到AR= ar $(ARFLAGS) r，替换为AR= /opt/android-toolchain/android-14/bin/arm-linux-androideabi-ar $(ARFLAGS) r
the fourth step)找到RANLIB= /usr/bin/ranlib，替换为RANLIB= /opt/android-toolchain/android-14/bin/arm-linux-androideabi-ranlib
the fifth step)找到NM= nm,修改为NM= /opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc-nm
the sixth step)找到MAKEDEPPROG= gcc，修改为MAKEDEPPROG= /opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc
e)cp Makefile Makefile.ok
f)执行make && make install
4) 编译pcre
a） tar xvf pcre-8.34.tar.gz
b) cd xvf pcre-8.34
c) gedit my_configure_pcre.sh
-----------------------------------my_configure_pcre.sh start here------------------------------------------------
#!/bin/sh
./configure \
--host=arm-linux \
--prefix=/home/zangcf/nginx_ndk/build \
CC=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc \
CPP=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-cpp \
AR=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-ar \
AS=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-as \
CXX=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-g++ \
CXXCPP=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-cpp
-----------------------------------my_configure_pcre.sh end here------------------------------------------------
d)chmod u+x my_configure_pcre.sh
e)./my_configure_pcre.sh
f)make && make install
5) 解压zlib
tar xvf zlib-1.2.8.tar.gz
6) 解压nginx_mod_h264
7)编译nginx
a)tar xvf nginx-1.5.9.tar.gz
b)cd nginx-1.5.9
c)gedit auto/cc/name
if [ "$NGX_PLATFORM" != win32 ]; then
ngx_feature="C compiler"
ngx_feature_name=
#ngx_feature_run=yes
ngx_feature_run=no ==>set to no to skip check
ngx_feature_incs=
ngx_feature_path=
d)gedit auto/types/sizeof
ngx_test="$CC $CC_TEST_FLAGS $CC_AUX_FLAGS
==> ngx_test="gcc $CC_TEST_FLAGS $CC_AUX_FLAGS
e) gedit src/os/unix/ngx_errno.h
at line 15 add #define NGX_SYS_NERR 333
f) gedit src/os/unix/ngx_shmem.c
#if (NGX_HAVE_MAP_ANON) ==> #if (!NGX_HAVE_MAP_ANON)
g) gedit auto/lib/pcre/make
./configure --disable-shared $PCRE_CONF_OPT
修改为
./configure --disable-shared $PCRE_CONF_OPT \
--host=arm-linux \
--prefix=/home/zangcf/nginx_ndk/build \
CC=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc \
CPP=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-cpp \
AR=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-ar \
AS=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-as \
CXX=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-g++ \
CXXCPP=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-cpp
h) gedit auto/lib/openssl/make
$OPENSSL/.openssl/include/openssl/ssl.h: $NGX_MAKEFILE
cd $OPENSSL \\
&& if [ -f Makefile ]; then \$(MAKE) clean; fi \\
&& ./config --prefix=$ngx_prefix no-shared $OPENSSL_OPT \\
&& \$(MAKE) \\
&& \$(MAKE) install LIBDIR=lib
修改为
$OPENSSL/.openssl/include/openssl/ssl.h: $NGX_MAKEFILE
cd $OPENSSL \\
i) 打开/home/zangcf/nginx_ndk/nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c，删除
if (r->zero_in_uri) {
return NGX_DECLINED;
}
j) gedit my_configure_nginx.sh
-----------------------------------my_configure_nginx.sh start here------------------------------------------------
#!/bin/sh
BUILD_PATH=/home/zangcf/nginx_ndk/build
CC_PATH=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-gcc
CPP_PATH=/opt/android-toolchain/android-14/bin/arm-linux-androideabi-g++
./configure \
--prefix=$BUILD_PATH \
--builddir=$BUILD_PATH \
--with-zlib=/home/zangcf/nginx_ndk/zlib-1.2.8 \
--with-pcre=/home/zangcf/nginx_ndk/pcre-8.34 \
--with-pcre-jit \
--with-cc=$CC_PATH \
--with-cpp=$CPP_PATH \
--with-openssl=/home/zangcf/nginx_ndk/openssl-1.0.1f \
--add-module=/home/zangcf/nginx_ndk/nginx_mod_h264_streaming-2.2.7 \
--with-http_flv_module \
--with-http_mp4_module \
--add-module=/home/zangcf/nginx_ndk/nginx-rtmp-module
-----------------------------------my_configure_nginx.sh end here------------------------------------------------
k) gedit ../build/Makefile
注意这里使用的arm_linux_gcc版本必须是4.4.3以后的，之前的本本可能会出错。
the first step)找到-I /home/zangcf/nginx_ndk/openssl-1.0.1f/.openssl/include \，替换为-I /home/zangcf/nginx_ndk/build/include/openssl \
the second step)找到 /home/zangcf/nginx_ndk/openssl-1.0.1f/.openssl/include/openssl/ssl.h \，替换为/home/zangcf/nginx_ndk/build/include/openssl/ssl.h
the third step)CFLAGS增加-I/opt/FriendlyARM/toolschain/4.4.3/arm-none-linux-gnueabi/sys-root/usr/include和-I/home/zangcf/nginx_ndk/build/include
the fourth step) CLAGS去掉 -Werror
the fifth step) 找到/home/zangcf/nginx_ndk/pcre-8.34/.libs/libpcre.a /home/zangcf/nginx_ndk/openssl-1.0.1f/.openssl/lib/libssl.a，替换为/home/zangcf/nginx_ndk/build/lib/libssl.a
the sixth step)找到/home/zangcf/nginx_ndk/openssl-1.0.1f/.openssl/lib/libcrypto.a，替换为/home/zangcf/nginx_ndk/build/lib/libcrypto.a
the seventh step) 在链接目标文件增加libc的标准库地址/opt/FriendlyARM/toolschain/4.4.3/arm-none-linux-gnueabi/sys-root/usr/lib/libcrypt.a和/opt/FriendlyARM/toolschain/4.4.3/arm-none-linux-gnueabi/sys-root/usr/lib/libc.a /home/zangcf/nginx_ndk/build/lib/libpcre.a
the eight step ) 找到/home/zangcf/nginx_ndk/pcre-8.34/.libs/libpcre.a，替换为/home/zangcf/nginx_ndk/build/lib/libpcre.a
这里如果集成Makefile还有找不到的文件，需要指定链接过程，类似做法如上。
l) make && make install
大工告成