执行时候出错,
[DRC REQP-1712] Input clock driver: Unsupported PLLE2_ADV connectivity. The signal u_clk_wiz_0/inst/clk_in1 on the u_clk_wiz_0/inst/plle2_adv_inst/CLKIN1 pin of u_clk_wiz_0/inst/plle2_adv_inst with COMPENSATION mode ZHOLD must be driven by a clock capable IO.
由提示信息可知,应该是配置clocking wizard出问题了。
解决办法:
选择PLL后,将source由“single ended clock capable pin”调为“global buffer”即可。再次implementation时候就不报错了。