配置nginx支持ssl服务器—HTTPS

下文摘自: http://docs.bigbluebutton.org/install/install.html

 

 

Configuring HTTPS on BigBlueButtonAnchor link for: configuring https on bigbluebutton

You’ll want to add HTTPS support to your BigBlueButton server for increased security. Also, as of Chrome 47, Chrome users will be unable to share their microphone via WebRTC unless BigBlueButton is loaded via HTTPS.

Configure BigBlueButton to use a domain nameAnchor link for: configure bigbluebutton to use a domain name

In order to obtain a valid SSL certificate for your server, you must configure the server to use a domain name that you own or control.

For the purposes of documentation, we will be using the domain name “example.com”, with a BigBlueButton server hosted at “bigbluebutton.example.com”.

Please run the commands as root.

Once you have a domain name and have configured it with a DNS host, add an A record pointing to your server. You can then use the bbb-conf setip command to configure BigBlueButton to use that domain name, for example:

bbb-conf --setip bigbluebutton.example.com

Obtain an SSL certificateAnchor link for: obtain an ssl certificate

In order to serve BigBlueButton over HTTPS, you need to have a valid SSL certificate. A domain validated (sometimes called “class 1”) certificate with a 2048 bit RSA key and SHA-256 checksum is the current recommended minimum, and it should be sufficient.

There are a number of providers that you could obtain a certificate from. Many domain name sales companies also offer certificates.

Some well known large providers of SSL certificates include Comodo, Symantec, GoDaddy, GlobalSign, and DigiCert. In addition, free SSL certificates are available from StartSSL and CACert, with some caveats: StartSSL certificates can’t be revoked without paying a service fee, and most people do not have the root for CACert installed in their web browser.

Each provider will give you a series of steps for generating the certificate, but they will normally include generating a private key and certificate request locally, sending the certificate request to be signed, and then receiving back the signed certificate after they have performed any required verification steps.

To install the certificate in BigBlueButton, you will need to have files for the certificate, private key, and any intermediate certificates in PEM format.

Configure nginx to use HTTPSAnchor link for: configure nginx to use https

Depending on your CA, you should now have 2 or more files, as follows:

  • Certificate
  • Private key
  • Intermediate certificate (there may be more than one, or could be none)

The next step is to install the files on the server.

Create the directory /etc/nginx/ssl:

mkdir /etc/nginx/ssl

And now create the private key file for nginx to use (replace the hostname in the filename with your own). In addition, fix the permissions so that only root can read the private key:

cat >/etc/nginx/ssl/bigbluebutton.example.com.key <<'END'
Paste the contents of your key file here
END
chmod 0600 /etc/nginx/ssl/bigbluebutton.example.com.key

And the certificate file. Note that nginx needs your server certificate and the list of intermediate certificates together in one file (replace the hostname in the filename with your own):

cat >/etc/nginx/ssl/bigbluebutton.example.com.crt <<'END'
Paste (in order) the contents of the following files:
  1. The signed certificate from the CA
  2. In order, each intermediate certificate provided by the CA (but do not include the root).
END

In addition, we’ll generate a set of 2048-bit diffie-hellman parameters to improve security for some types of ciphers. This step can take several minutes to complete, particularly if run on a virtual machine.

openssl dhparam -out /etc/nginx/ssl/dhp-2048.pem 2048

Now we can edit the nginx configuration to use SSL. Edit the file /etc/nginx/sites-available/bigbluebutton to add the marked lines. Ensure that you’re using the correct filenames to match the certificate and key files you created above.

 /etc/nginx/ssl/dhp-2048.pem;
  [...]

For reference, note that the SSL settings used above are based on those proposed in https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/ and provide support for all modern browsers (including IE8, but not IE6, on Windows XP). Please note that recommended SSL settings are subject to change as new vulnerabilities are found.

 

 

Test your HTTPS configurationAnchor link for: test your https configuration

In order to ensure you didn’t make any mistakes that could cause security compromises, please test your HTTPS configuration. A well-respected site that can do a series of automated tests is https://www.ssllabs.com/ssltest/ - simply enter your server’s hostname, optionally check the “Do not show results” checkbox if you would like to keep it private, then Submit.

At time of writing, the configuration shown on this page should achieve an “A” ranking in the SSL Labs test page.

开始做,坚持做,重复做
上一篇:ESP32 使用BLE蓝牙透传


下一篇:Android之BLE(低功耗)蓝牙开发,价值2000元的学习资源泄露