基于Keepalived+Haproxy搭建四层负载均衡器

2022-05-05 02:43:47

http://blog.liuts.com/post/223/
一、前言
       Haproxy是稳定、高性能、高可用性的负载均衡解决方案，支持HTTP及TCP代理后端服务器池，因支持强大灵活的7层acl规则，广泛作为HTTP反向代理。本文则详细介绍如何利用它的四层交换与Keepalived实现一个负载均衡器，适用于Socket、ICE、Mail、Mysql、私有通讯等任意TCP服务。系统架构图如下：

基于Keepalived+Haproxy搭建四层负载均衡器

二、平台环境
引用

OS:Centos5.4(64X)
MASTER:192.168.0.20
BACKUP:192.168.0.21
VIP:192.168.0.100
Serivce Port:11231

三、平台安装配置
1、添加非本机IP邦定支持
引用

#vi /etc/sysctl.conf
net.ipv4.ip_nonlocal_bind=1
#sysctl –p

2、配置平台日志支持
引用

#vi /etc/syslog.conf
添加：
local3.*        /var/log/haproxy.log
local0.*        /var/log/haproxy.log

#vi /etc/sysconfig/syslog
修改：
SYSLOGD_OPTIONS="-r -m 0"
#/etc/init.d/syslog restart

3、关闭SELINUX
引用

vi /etc/sysconfig/selinux
修改：
SELINUX=disabled
#setenforce 0

4、配置iptables，添加VRRP通讯支持
引用

iptables -A INPUT -d 224.0.0.18 -j ACCEPT

5、Keepalived的安装、配置
引用

#mkdir -p /home/install/keepalivedha
#cd /home/install/keepalivedha
#wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
#tar zxvf keepalived-1.2.2.tar.gz
#cd keepalived-1.2.2
#./configure
#make && make install

引用

#cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
#cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
#mkdir /etc/keepalived
#cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
#cp /usr/local/sbin/keepalived /usr/sbin/

#vi /etc/keepalived/keepalived.conf
view plaincopy to clipboardprint?
  1. ! Configuration File for keepalived   
  2.   
  3. global_defs {   
  4.    notification_email {   
  5.          liutiansi@gmail.com   
  6.    }   
  7.    notification_email_from liutiansi@gmail.com   
  8.    smtp_connect_timeout 3   
  9.    smtp_server 127.0.0.1   
  10.    router_id LVS_DEVEL   
  11. }   
  12. vrrp_script chk_haproxy {   
  13.     script "killall -0 haproxy"  
  14.     interval 2   
  15.     weight 2   
  16. }   
  17. vrrp_instance VI_1 {   
  18.     interface eth1   
  19.     state MASTER # 从为"BACKUP"  
  20.     priority 101 # 从为100   
  21.     virtual_router_id 50 #路由ID，可通过#tcpdump vrrp查看。   
  22.     garp_master_delay 1 #主从切换时间，单位为秒。   
  23.   
  24.     authentication {   
  25.         auth_type PASS   
  26.         auth_pass KJj23576hYgu23IP   
  27.     }   
  28.     track_interface {   
  29.        eth0   
  30.        eth1   
  31.     }   
  32.     virtual_ipaddress {   
  33.         192.168.0.100   
  34.     }   
  35.     track_script {   
  36.         chk_haproxy   
  37.     }   
  38.   
  39.     #状态通知   
  40.     notify_master "/etc/keepalived/Mailnotify.py master"  
  41.     notify_backup "/etc/keepalived/Mailnotify.py backup"  
  42.     notify_fault "/etc/keepalived/Mailnotify.py fault"  
  43. }   
! Configuration File for keepalived global_defs {    notification_email {          liutiansi@gmail.com    }    notification_email_from liutiansi@gmail.com    smtp_connect_timeout 3    smtp_server 127.0.0.1    router_id LVS_DEVEL } vrrp_script chk_haproxy {     script "killall -0 haproxy"     interval 2     weight 2 } vrrp_instance VI_1 {     interface eth1     state MASTER # 从为"BACKUP"     priority 101 # 从为100     virtual_router_id 50 #路由ID，可通过#tcpdump vrrp查看。     garp_master_delay 1 #主从切换时间，单位为秒。     authentication {         auth_type PASS         auth_pass KJj23576hYgu23IP     }     track_interface {        eth0        eth1     }     virtual_ipaddress {         192.168.0.100     }     track_script {         chk_haproxy     }     #状态通知     notify_master "/etc/keepalived/Mailnotify.py master"     notify_backup "/etc/keepalived/Mailnotify.py backup"     notify_fault "/etc/keepalived/Mailnotify.py fault" }
6、Haproxy的安装与配置
引用

#cd /home/install/keepalivedha
#wget http://haproxy.1wt.eu/download/1.4/src/haproxy-1.4.11.tar.gz
#tar -zxvf haproxy-1.4.11.tar.gz
#cd haproxy-1.4.11
#make install
#mkdir -p /usr/local/haproxy/etc
#mkdir -p /usr/local/haproxy/sbin
#cp examples/haproxy.cfg /usr/local/haproxy/etc
#ln -s /usr/local/sbin/haproxy /usr/local/haproxy/sbin/haproxy

#vi /usr/local/haproxy/etc/haproxy.cfg
view plaincopy to clipboardprint?
  1. # this config needs haproxy-1.1.28 or haproxy-1.2.1   
  2.   
  3. global   
  4. #        log 127.0.0.1   local0   
  5.         log 127.0.0.1   local1 notice   
  6.         maxconn 5000   
  7.         uid 99   
  8.         gid 99   
  9.         daemon   
  10.         pidfile /usr/local/haproxy/haproxy.pid   
  11.   
  12.   
  13. defaults   
  14.         log     global   
  15.         mode    http   
  16.         #option httplog   
  17.         option  dontlognull   
  18.         retries 3   
  19.         option redispatch   
  20.         maxconn 2000   
  21.         contimeout      5000   
  22.         clitimeout      50000   
  23.         srvtimeout      50000   
  24.   
  25. listen  ICE01   192.168.0.100:11231   
  26.         mode tcp #配置TCP模式   
  27.         maxconn 2000   
  28.         balance roundrobin   
  29.         server  ice-192.168.0.128 192.168.0.128:11231 check inter 5000 fall 1 rise 2   
  30.         server  ice-192.168.0.129 192.168.0.129:11231 check inter 5000 fall 1 rise 2   
  31.         server  ice-192.168.0.130 192.168.0.130:11231 check inter 5000 fall 1 rise 2   
  32.         server  ice-192.168.0.131 192.168.0.131:11231 check inter 5000 fall 1 rise 2   
  33.         server  ice-192.168.0.132 192.168.0.132:11231 check inter 5000 fall 1 rise 2   
  34.         server  ice-192.168.0.34 192.168.0.34:11231 check inter 5000 fall 1 rise 2   
  35.         srvtimeout      20000   
  36.   
  37. listen stats_auth 192.168.0.20:80   
  38. # listen stats_auth 192.168.0.21:80 # backup config   
  39.         stats enable   
  40.         stats uri  /admin-status #管理地址   
  41.         stats auth  admin:123456 #管理帐号:管理密码   
  42.         stats admin if TRUE   
# this config needs haproxy-1.1.28 or haproxy-1.2.1 global #        log 127.0.0.1   local0         log 127.0.0.1   local1 notice         maxconn 5000         uid 99         gid 99         daemon         pidfile /usr/local/haproxy/haproxy.pid defaults         log     global         mode    http         #option httplog         option  dontlognull         retries 3         option redispatch         maxconn 2000         contimeout      5000         clitimeout      50000         srvtimeout      50000 listen  ICE01   192.168.0.100:11231         mode tcp #配置TCP模式         maxconn 2000         balance roundrobin         server  ice-192.168.0.128 192.168.0.128:11231 check inter 5000 fall 1 rise 2         server  ice-192.168.0.129 192.168.0.129:11231 check inter 5000 fall 1 rise 2         server  ice-192.168.0.130 192.168.0.130:11231 check inter 5000 fall 1 rise 2         server  ice-192.168.0.131 192.168.0.131:11231 check inter 5000 fall 1 rise 2         server  ice-192.168.0.132 192.168.0.132:11231 check inter 5000 fall 1 rise 2         server  ice-192.168.0.34 192.168.0.34:11231 check inter 5000 fall 1 rise 2         srvtimeout      20000 listen stats_auth 192.168.0.20:80 # listen stats_auth 192.168.0.21:80 # backup config         stats enable         stats uri  /admin-status #管理地址         stats auth  admin:123456 #管理帐号:管理密码         stats admin if TRUE
7、邮件通知程序(python实现)
#vi /etc/keepalived/Mailnotify.py
view plaincopy to clipboardprint?
  1. #!/usr/local/bin/python   
  2. #coding: utf-8   
  3. from email.MIMEMultipart import MIMEMultipart   
  4. from email.MIMEText import MIMEText   
  5. from email.MIMEImage import MIMEImage   
  6. from email.header import Header   
  7. import sys  
  8. import smtplib  
  9.   
  10. #---------------------------------------------------------------   
  11. # Name:        Mailnotify.py   
  12. # Purpose:     Mail notify to SA   
  13. # Author:      Liutiansi   
  14. # Email:       liutiansi@gamil.com   
  15. # Created:     2011/03/09   
  16. # Copyright:   (c) 2011   
  17. #--------------------------------------------------------------   
  18. strFrom = 'admin@domain.com'   
  19. strTo = 'liutiansi@gmail.com'   
  20. smtp_server='smtp.domain.com'   
  21. smtp_pass='123456'   
  22.   
  23. if sys.argv[1]!="master" and sys.argv[1]!="backup"  and sys.argv[1]!="fault":   
  24.     sys.exit()   
  25. else:   
  26.     notify_type=sys.argv[1]   
  27.   
  28.   
  29. mail_title='[紧急]负载均衡器邮件通知'   
  30. mail_body_plain=notify_type+'被激活，请做好应急处理。'   
  31. mail_body_html='<b><font color=red>'+notify_type+'被激活，请做好应急处理。</font></b>'   
  32.   
  33. msgRoot = MIMEMultipart('related')   
  34. msgRoot['Subject'] =Header(mail_title,'utf-8')   
  35. msgRoot['From'] = strFrom   
  36. msgRoot['To'] = strTo   
  37.   
  38. msgAlternative = MIMEMultipart('alternative')   
  39. msgRoot.attach(msgAlternative)   
  40.   
  41. msgText = MIMEText(mail_body_plain, 'plain', 'utf-8')   
  42. msgAlternative.attach(msgText)   
  43.   
  44.   
  45. msgText = MIMEText(mail_body_html, 'html','utf-8')   
  46. msgAlternative.attach(msgText)   
  47.   
  48.   
  49. smtp = smtplib.SMTP()   
  50. smtp.connect(smtp_server)   
  51. smtp.login(smtp_user,smtp_pass)   
  52. smtp.sendmail(strFrom, strTo, msgRoot.as_string())   
  53. smtp.quit()   
#!/usr/local/bin/python #coding: utf-8 from email.MIMEMultipart import MIMEMultipart from email.MIMEText import MIMEText from email.MIMEImage import MIMEImage from email.header import Header import sys import smtplib #--------------------------------------------------------------- # Name:        Mailnotify.py # Purpose:     Mail notify to SA # Author:      Liutiansi # Email:       liutiansi@gamil.com # Created:     2011/03/09 # Copyright:   (c) 2011 #-------------------------------------------------------------- strFrom = 'admin@domain.com' strTo = 'liutiansi@gmail.com' smtp_server='smtp.domain.com' smtp_pass='123456' if sys.argv[1]!="master" and sys.argv[1]!="backup"  and sys.argv[1]!="fault":     sys.exit() else:     notify_type=sys.argv[1] mail_title='[紧急]负载均衡器邮件通知' mail_body_plain=notify_type+'被激活，请做好应急处理。' mail_body_html='<b><font color=red>'+notify_type+'被激活，请做好应急处理。</font></b>' msgRoot = MIMEMultipart('related') msgRoot['Subject'] =Header(mail_title,'utf-8') msgRoot['From'] = strFrom msgRoot['To'] = strTo msgAlternative = MIMEMultipart('alternative') msgRoot.attach(msgAlternative) msgText = MIMEText(mail_body_plain, 'plain', 'utf-8') msgAlternative.attach(msgText) msgText = MIMEText(mail_body_html, 'html','utf-8') msgAlternative.attach(msgText) smtp = smtplib.SMTP() smtp.connect(smtp_server) smtp.login(smtp_user,smtp_pass) smtp.sendmail(strFrom, strTo, msgRoot.as_string()) smtp.quit()
注：修改成系统python实际路径“#!/usr/local/bin/python”(第一行)
#chmod +x /etc/keepalived/Mailnotify.py
#/usr/local/haproxy/sbin/haproxy -f /usr/local/haproxy/etc/haproxy.cfg
#service keepalived start

8、查看VRRP通讯记录
#tcpdump vrrp
引用

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
15:49:05.270017 IP 192.168.0.20 > VRRP.MCAST.NET: VRRPv2, Advertisement, vrid 50, prio 100, authtype simple, intvl 1s, length 20

四、Haproxy界面
访问http://192.168.0.20/admin-status，输入帐号admin密码123456进入管理监控平台。
基于Keepalived+Haproxy搭建四层负载均衡器
haproxy-1.4.11最大的亮点是添加了手工启用/禁用功能，对升级变更应用时非常有用。

五、邮件通知
基于Keepalived+Haproxy搭建四层负载均衡器
上一篇：ios应用程序-图像浏览及音频播放


下一篇：多线程+委托的安全访问（invoke）