【Arduino基础教程】4*4矩阵键盘

2023-10-18 22:02:58

4*4 Keypad

01准备材料

Arduino Uno 开发板；
4*4矩阵键盘
8根跳线

02接线

Keypad Pin R1 –> Arduino Pin 2
Keypad Pin R2 –> Arduino Pin 3
Keypad Pin R3 –> Arduino Pin 4
Keypad Pin R4 –> Arduino Pin 5
Keypad Pin C1 –> Arduino Pin 6
Keypad Pin C2 –> Arduino Pin 7
Keypad Pin C3 –> Arduino Pin 8
Keypad Pin C4 –> Arduino Pin 9

03所需库文件

在Arduino IDE 1.6.2 或者以上版本中, 项目->加载库->管理库中搜索Keypad，然后安装即可。
也可以在这里下载库，然后手动添加到IDE中。

04初始化设置

keypad(makeKeymap(userKeymap), row[], col[], rows, cols)

const byte rows = 4; //four rows
const byte cols = 3; //three columns
char keys[rows][cols] = {
  {'1','2','3'},
  {'4','5','6'},
  {'7','8','9'},
  {'#','0','*'}
};
byte rowPins[rows] = {5, 4, 3, 2}; //connect to the row pinouts of the keypad
byte colPins[cols] = {8, 7, 6}; //connect to the column pinouts of the keypad
Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, rows, cols );

05常用函数

void begin(makeKeymap(userKeymap))

Initializes the internal keymap to be equal to userKeymap
[See File -> Examples -> Keypad -> Examples -> CustomKeypad]

char waitForKey()

This function will wait forever until someone presses a key. Warning: It blocks all other code until a key is pressed. That means no blinking LED's, no LCD screen updates, no nothing with the exception of interrupt routines.

char getKey()

Returns the key that is pressed, if any. This function is non-blocking.

KeyState getState()

Returns the current state of any of the keys.
The four states are IDLE, PRESSED, RELEASED and HOLD.

boolean keyStateChanged()

New in version 2.0: Let's you know when the key has changed from one state to another. For example, instead of just testing for a valid key you can test for when a key was pressed.

setHoldTime(unsigned int time)

Set the amount of milliseconds the user will have to hold a button until the HOLD state is triggered.

setDebounceTime(unsigned int time)

Set the amount of milliseconds the keypad will wait until it accepts a new keypress/keyEvent. This is the "time delay" debounce method.

addEventListener(keypadEvent)

Trigger an event if the keypad is used. You can load an example in the Arduino IDE.
[See File -> Examples -> Keypad -> Examples -> EventSerialKeypad] or see the KeypadEvent Example code.

06示例代码

#include <Keypad.h>

const byte ROWS = 4; //four rows
const byte COLS = 3; //three columns
char keys[ROWS][COLS] = {
  {'1','2','3'},
  {'4','5','6'},
  {'7','8','9'},
  {'#','0','*'}
};
byte rowPins[ROWS] = {5, 4, 3, 2}; //connect to the row pinouts of the keypad
byte colPins[COLS] = {8, 7, 6}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

void setup(){
  Serial.begin(9600);
}

void loop(){
  char key = keypad.getKey();

  if (key != NO_KEY){
    Serial.println(key);
  }
}

07参考文献

http://playground.arduino.cc//Code/Keypad

码农公寓