【学习笔记】XR872 GUI Littlevgl 8.0 移植(显示部分)

LVGL 介绍

官方网站:https://lvgl.io/

源码位置:https://github.com/lvgl/lvgl

官方文档:https://docs.lvgl.io/master/intro/index.html

LVGL 是一款使用 C 语言编写的非常精巧的开源 UI,拥有非常漂亮的视觉效果,对硬件资源要求很低,且移植非常简单。

以下位摘录则官方文档中对硬件最低要求说明:

  • 16, 32 or 64 bit microcontroller or processor
  • > 16 MHz clock speed is recommended
  • Flash/ROM: > 64 kB for the very essential components (> 180 kB is recommended)
  • RAM:
    • Static RAM usage: ~2 kB depending on the used features and objects types
    • Stack: > 2kB (> 8 kB is recommended)
    • Dynamic data (heap): > 4 KB (> 32 kB is recommended if using several objects).     Set by LV_MEM_SIZE in lv_conf.h.
    • Display buffer:  > "Horizontal resolution" pixels (> 10 × "Horizontal resolution" is recommended)
    • One frame buffer in the MCU or in external display controller
  • C99 or newer compiler
  • Basic C (or C++) knowledge: pointersstructscallbacks.

LVGL 移植说明

LVGL 已将跟硬件相关的代码实现抽象出来,涉及到以下三个硬件模块,我们只需要按需选择实现即可:

一. 显示模块,模板文件为:lv_port_disp_template.h、lv_port_disp_template.c

实现回调接口:

void (*flush_cb)(struct _lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p);

当需要绘制或更新图像时,LVGL会通过该接口传递一个指定矩形区域(area)和显示指定颜色值(color_p),我们需要实现在指定矩形区域内绘制指定颜色值。

LVGL 在刷动态效果是以固定的频率刷新(FPS),默认间隔时间为 30ms,通过配置文件中的宏决定 LV_DISP_DEF_REFR_PERIOD

2. 输入模块,模板文件为:lv_port_indev_template.h、lv_port_indev_template.c

输入设备支持四种类型:LV_INDEV_TYPE_POINTER(鼠标\触摸屏)、LV_INDEV_TYPE_KEYPAD(键盘)、LV_INDEV_TYPE_BUTTON(按钮)、LV_INDEV_TYPE_ENCODER(编码器)

实现回调接口:

void (*read_cb)(struct _lv_indev_drv_t * indev_drv, lv_indev_data_t * data);

LVGL 会间隔指定时间去调用此接口,来获取外部输入设备的输入事件,默认间隔时间为 30ms,通过配置文件中的宏决定 LV_INDEV_DEF_READ_PERIOD

3. 文件系统,模板文件为:lv_port_fs_template.h、lv_port_fs_template.c

实现回调接口:

bool (*ready_cb)(struct _lv_fs_drv_t * drv);

void * (*open_cb)(struct _lv_fs_drv_t * drv, const char * path, lv_fs_mode_t mode);
lv_fs_res_t (*close_cb)(struct _lv_fs_drv_t * drv, void * file_p);
lv_fs_res_t (*read_cb)(struct _lv_fs_drv_t * drv, void * file_p, void * buf, uint32_t btr, uint32_t * br);
lv_fs_res_t (*write_cb)(struct _lv_fs_drv_t * drv, void * file_p, const void * buf, uint32_t btw, uint32_t * bw);
lv_fs_res_t (*seek_cb)(struct _lv_fs_drv_t * drv, void * file_p, uint32_t pos, lv_fs_whence_t whence);
lv_fs_res_t (*tell_cb)(struct _lv_fs_drv_t * drv, void * file_p, uint32_t * pos_p);

void * (*dir_open_cb)(struct _lv_fs_drv_t * drv, const char * path);
lv_fs_res_t (*dir_read_cb)(struct _lv_fs_drv_t * drv, void * rddir_p, char * fn);
lv_fs_res_t (*dir_close_cb)(struct _lv_fs_drv_t * drv, void * rddir_p);

对应API接口:

lv_fs_res_t lv_fs_open(lv_fs_file_t * file_p, const char * path, lv_fs_mode_t mode);
lv_fs_res_t lv_fs_close(lv_fs_file_t * file_p);
lv_fs_res_t lv_fs_read(lv_fs_file_t * file_p, void * buf, uint32_t btr, uint32_t * br);
lv_fs_res_t lv_fs_write(lv_fs_file_t * file_p, const void * buf, uint32_t btw, uint32_t * bw);
lv_fs_res_t lv_fs_seek(lv_fs_file_t * file_p, uint32_t pos, lv_fs_whence_t whence);
lv_fs_res_t lv_fs_tell(lv_fs_file_t * file_p, uint32_t * pos);
lv_fs_res_t lv_fs_dir_open(lv_fs_dir_t * rddir_p, const char * path);
lv_fs_res_t lv_fs_dir_read(lv_fs_dir_t * rddir_p, char * fn);
lv_fs_res_t lv_fs_dir_close(lv_fs_dir_t * rddir_p);

移植前准备工作

一、建立新的工程

拷贝 xradio-skylark-sdk\project\demo\hello_demo 到 xradio-skylark-sdk\project\demo\lvgl_demo

二、LCD 驱动移植

需要提前准备好可以在 XR872 平台上使用的 LCD ,并且实现设定绘制区域接口和在区域内绘制指定颜色的接口。

我这里选择型号为 ZJY154S0800TG01,屏驱芯片 st7789,分辨率为 240x240,颜色格式为:RGB565,通信接口为 SPI(8BIT)

三、下载源代码:https://github.com/lvgl/lvgl/archive/refs/tags/v8.0.0.zip

将下载好的源代码解压到 xradio-skylark-sdk\project\demo\lvgl_demo\gui\ 并重命名为 lvgl

四、抽取配置文件

拷贝 xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl\lv_conf_template.h 到  xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h

五、使能配置文件生效

xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h

--- xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl\lv_conf_template.h	2021-06-01 15:48:03.000000000 +0800
+++ xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h	2021-06-13 18:13:54.000000000 +0800
@@ -4,13 +4,13 @@
  */
 
 /*
  * COPY THIS FILE AS `lv_conf.h` NEXT TO the `lvgl` FOLDER
  */
 
-#if 0 /*Set it to "1" to enable content*/
+#if 1 /*Set it to "1" to enable content*/
 
 #ifndef LV_CONF_H
 #define LV_CONF_H
 /*clang-format off*/
 
 #include <stdint.h>

六、LVGL 时钟心跳和 LVGL 主循环

新增两个文件,填写以下内容,LVGL 内部有自己的定时器和绘图循环,因此需要定期调用 lv_tick_inc()、lv_task_handler() 两个接口

在这里我通过建立两个系统任务来调用,将 lv_tick_inc() 任务的优先级调至最高,也可以通过硬件定时器来调用该接口。

xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl_driver\lv_tick_handle.h

/**
******************************************************************************
* @文件		lv_tick_handle.h
* @版本		V1.0.0
* @日期
* @概要		LVGL 时钟基准和主循环定期调用
* @作者		lmx
******************************************************************************
* @注意
*
*
******************************************************************************
*/
#ifndef _LV_TICK_HANDLE_H
#define _LV_TICK_HANDLE_H

/*************************************************************
*	函数: 		lv_tick_handle_init
*	功能:		内部创建两个任务分别定时调用 LVGL 的时钟基准和主循环接口
*	参数:					
*	返回值:		
**************************************************************/	
void lv_tick_handle_init(void);

#endif 

 xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl_driver\lv_tick_handle.c

/**
******************************************************************************
* @文件		lv_tick_handle.h
* @版本		V1.0.0
* @日期
* @概要		LVGL 时钟基准和主循环定期调用
* @作者		lmx
******************************************************************************
* @注意
*
*
******************************************************************************
*/
#include <stdio.h>
#include "lv_port_disp.h"
#include "kernel/os/os.h"

/*************************************************************
*	函数: 		prvLvTickTask
*	功能:		LVGL 时钟基准任务
*	参数:					
*	返回值:		
**************************************************************/	
static void prvLvTickTask(void *pvParameters)
{
	while(1){
		lv_tick_inc(1);
		OS_MSleep(1);
	}
	
	return ;
}

/*************************************************************
*	函数: 		prvLvHandlerTask
*	功能:		LVGL 主循环任务
*	参数:					
*	返回值:		
**************************************************************/	
static void prvLvHandlerTask(void *pvParameters)
{
	while(1){
		lv_task_handler();
		OS_MSleep(5);
	}
	
	return ;
}

/*************************************************************
*	函数: 		lv_tick_handle_init
*	功能:		内部创建两个任务分别定时调用 LVGL 的时钟基准和主循环接口
*	参数:					
*	返回值:		
**************************************************************/	
void lv_tick_handle_init(void)
{
	printf("[lv_disp] OS_ThreadCreate: prvLvTickTask\n");
	#define LVGL_TASK_TICK_PRIORITY 		(OS_PRIORITY_REAL_TIME)	
	#define LVGL_TASK_TICK_STACK_SIZE 		(4 * 1024)
	static OS_Thread_t lv_task_tick_thread;
	OS_ThreadCreate(&lv_task_tick_thread, "lvgl_task_tick", prvLvTickTask, (void *)NULL, LVGL_TASK_TICK_PRIORITY, LVGL_TASK_TICK_STACK_SIZE);
	
	printf("[lv_disp] OS_ThreadCreate: prvLvHandlerTask\n");
	#define LVGL_TASK_HANDLER_PRIORITY 		(OS_PRIORITY_NORMAL)	
	#define LVGL_TASK_HANDLER_STACK_SIZE 	(4 * 1024)
	static OS_Thread_t lv_task_handle_thread;
	OS_ThreadCreate(&lv_task_handle_thread, "lvgl_task_handler", prvLvHandlerTask, (void *)NULL, LVGL_TASK_HANDLER_PRIORITY, LVGL_TASK_HANDLER_STACK_SIZE);
	
	return ;
}

七、编译工程排错

问题一:找不到头文件 lvgl.h

../../../../project/demo/lvgl_demo/gui/lvgl/examples/assets/animimg001.c:4:23: fatal error: lvgl/lvgl.h: No such file or directory
 #include "lvgl/lvgl.h"
                       ^
compilation terminated.
make: *** [../../../../gcc.mk:218: ../../../../project/demo/lvgl_demo/gui/lvgl/examples/assets/animimg001.o] Error 1

解决方法:设置好 lvgl 所在的路径作为 GCC 搜索路径

--- xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
+++ xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
@@ -53,13 +53,13 @@
 # PRJ_EXTRA_LIBS_PATH :=
 
 # extra libraries
 # PRJ_EXTRA_LIBS :=
 
 # extra header files searching path
-# PRJ_EXTRA_INC_PATH :=
+PRJ_EXTRA_INC_PATH := -I$(PRJ_ROOT_PATH)/gui
 
 # extra symbols (macros)
 # PRJ_EXTRA_SYMBOLS :=
 
 # ----------------------------------------------------------------------------
 # override project variables

问题二:未使用的变量

../../../../project/demo/lvgl_demo/gui/lvgl/examples/widgets/btnmatrix/lv_example_btnmatrix_1.c: In function 'event_handler':
../../../../project/demo/lvgl_demo/gui/lvgl/examples/widgets/btnmatrix/lv_example_btnmatrix_1.c:10:22: error: unused variable 'txt' [-Werror=unused-variable]
         const char * txt = lv_btnmatrix_get_btn_text(obj, id);
                      ^
cc1.exe: all warnings being treated as errors
make: *** [../../../../gcc.mk:218: ../../../../project/demo/lvgl_demo/gui/lvgl/examples/widgets/btnmatrix/lv_example_btnmatrix_1.o] Error 1

解决方法:最快的解决方法就是设置编译器不将未使用的变量视为错误,也可以去修改源代码,把响应未使用的变量屏蔽掉,但不建议这么去做。

--- xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
+++ xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
@@ -46,12 +46,14 @@
 DIRS += $(PRJ_BOARD)
 
 SRCS := $(basename $(foreach dir,$(DIRS),$(wildcard $(dir)/*.[csS])))
 
 OBJS := $(addsuffix .o,$(SRCS))
 
+CC_FLAGS += -Wno-error
+
 # extra libraries searching path
 # PRJ_EXTRA_LIBS_PATH :=
 
 # extra libraries
 # PRJ_EXTRA_LIBS :=
 

 问题三:提示空间不足

err: bin 1 and bin 2 were overlaped!
Overlapped size: 126176 Byte(124kB)
bin 1 name:app.bin    begin: 0x00008000    end: 0x000318E0
bin 2 name:app_xip.bin    begin: 0x00012C00

We've rearranged bin files and generated new cfg file 'image_auto_cal.cfg', the new one is recommended.
Generate image file failed
make: *** [../../../../project/project.mk:352: image] Error 127

解决方法:按照编译提示信息,将 image_auto_cal.cfg 文件重命名为 image.cfg 文件,同时修改 Makefile

--- xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
+++ xradio-skylark-sdk\project\demo\lvgl_demo\gcc\Makefile
@@ -48,12 +48,14 @@
 SRCS := $(basename $(foreach dir,$(DIRS),$(wildcard $(dir)/*.[csS])))
 
 OBJS := $(addsuffix .o,$(SRCS))
 
 CC_FLAGS += -Wno-error
 
+IMAGE_CFG := ./image.cfg
+
 # extra header files searching path
 PRJ_EXTRA_INC_PATH := -I$(PRJ_ROOT_PATH)/gui
 
 # extra symbols (macros)
 # PRJ_EXTRA_SYMBOLS :=
 

显示驱动实现

主要参考 lvgl_demo\lvgl\examples\porting 中的  lv_port_disp_template.h、lv_port_disp_template.c 两个文件即可。

我这边基于多屏兼容性考虑,为了提高可读性和灵活性,不固定分辨率和位宽,做了精简和调整,完整实现文件如下:

 xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl_driver\lv_port_disp.h

/**
******************************************************************************
* @文件		lv_port_disp.h
* @版本		V1.0.0
* @日期
* @概要		LVGL 显示驱动
* @作者		lmx
******************************************************************************
* @注意
*
*
******************************************************************************
*/
#ifndef LV_PORT_DISP_H
#define LV_PORT_DISP_H

#include "lvgl/lvgl.h"
#include "library/inc/lcd_device.h"

/*************************************************************
*	函数: 		lv_port_disp_init
*	功能:		初始化显示设备
*	参数:					
*	返回值:		-1:失败   0:成功
**************************************************************/	
int lv_port_disp_init(lcd_device_t *lcd);

#endif 

xradio-skylark-sdk\project\demo\lvgl_demo\gui\lvgl_driver\lv_port_disp.c 

/**
******************************************************************************
* @文件		lv_port_disp.c
* @版本		V1.0.0
* @日期
* @概要		LVGL 显示驱动
* @作者		lmx
******************************************************************************
* @注意
*
*
******************************************************************************
*/
#include <stdio.h>
#include "lv_port_disp.h"
#include "kernel/os/os.h"

typedef struct{
	lcd_device_t 	*lcd;
	unsigned short  *frame;
}disp_device_t;

/*************************************************************
*	函数: 		disp_flush
*	功能:		绘制颜色点回调
*	参数:					
*	返回值:		
**************************************************************/	
static void disp_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
{
	disp_device_t *disp = (disp_device_t *)disp_drv->user_data;
	lv_color_t *buf = (lv_color_t *)disp->frame;
	uint32_t w = (area->x2 - area->x1 + 1);
	uint32_t h = (area->y2 - area->y1 + 1);
	uint32_t i, len = w * h;

	// 对颜色值进行排序
	for(i = 0; i < len; i++){
		buf[i] = (lv_color_t)color_p->full;
		color_p++;
	}
	
	// 设置显示区域, 并一次性更新数据, 可以提升刷图速度
	disp->lcd->set_window(area->x1, area->y1, area->x2, area->y2);
	disp->lcd->brush(buf, len * sizeof(lv_color_t));
    lv_disp_flush_ready(disp_drv);
}

/*************************************************************
*	函数: 		lv_port_disp_init
*	功能:		初始化显示设备
*	参数:					
*	返回值:		-1:失败   0:成功
**************************************************************/	
int lv_port_disp_init(lcd_device_t *lcd)
{
	static disp_device_t	disp;
    lcd_info_t				lcd_info;
	unsigned int 			buflen;
	
	disp.lcd = lcd;
	lcd->get_info(&lcd_info);
	printf("[lv_disp] lcd:[%s]:[%dx%d] %d\n", lcd_info.name, lcd_info.hor, lcd_info.ver, sizeof(lv_color_t));
	
	// LVGL 内部所需要的显存缓冲区
    static lv_disp_draw_buf_t draw_buf_dsc_1;
	buflen = lcd_info.hor * 10 * sizeof(lv_color_t);
    lv_color_t *buf_1 = lv_mem_alloc(buflen);
	if(NULL == buf_1){
		printf("[lv_disp] draw lv_mem_alloc failed...\n");
		return -1;
	}
	lv_disp_draw_buf_init(&draw_buf_dsc_1, buf_1, NULL, lcd_info.hor * 10);
	
	// 申请缓存空间, 用于存储排序后的颜色数据
	disp.frame = lv_mem_alloc(buflen);
	if(NULL == disp.frame){
		printf("[lv_disp] frame lv_mem_alloc failed...\n");
		lv_mem_free(buf_1);
		return -1;
	}

	// 将此显示驱动注册到 LVGL 中
    static lv_disp_drv_t disp_drv;                        
    lv_disp_drv_init(&disp_drv); 
    disp_drv.hor_res = lcd_info.hor;
    disp_drv.ver_res = lcd_info.ver;
    disp_drv.flush_cb = disp_flush;
    disp_drv.draw_buf = &draw_buf_dsc_1;
	disp_drv.user_data = &disp;
    lv_disp_drv_register(&disp_drv);

	return ;
}

最后一步还需要根据实际显示屏的能力来调整

1. LV_COLOR_DEPTH:颜色位深 ,我现在使用的屏是 RGB565,因此需要设定为 16 位宽

2. LV_COLOR_16_SWAP:同时由于 XR872 只支持 SPI 8BIT 传输方式,涉及高低字节传输问题,需要使能 LV_COLOR_16_SWAP

3. LV_USE_PERF_MONITOR:打开此宏可以显示当前 CPU 使用率和帧率,便于优化和显示

4. LV_MEM_CUSTOM:设置为 1 打开此宏,使用动态内存分配,LVGL 实际运行需要多少就申请多少

备注说明:

LV_USE_MEM_MONITOR:打开此宏可以显示当前所使用的内存大小和占用比例,以及产生多少碎片。(这里使用动态内存,打开也不会显示)

注意,这里的内存占用比例指的是 LV_MEM_CUSTOM 宏为 0 的情况下,LV_MEM_SIZE 所定义的大小除于 LVGL 内部实际占用内存大小之比。

LVGL 有自己的内存管理机制,LV_MEM_SIZE 为一个静态数组的大小,这样就可以给 LVGL 设限,只允许它只使用指定已经分配好多大的内存区域。

xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h

--- xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h		2021-06-13 20:42:52.000000000 +0800
+++ xradio-skylark-sdk\project\demo\lvgl_demo\gui\lv_conf.h		2021-06-13 20:29:53.000000000 +0800
@@ -18,16 +18,16 @@
 
 /*====================
    COLOR SETTINGS
  *====================*/
 
 /*Color depth: 1 (1 byte per pixel), 8 (RGB332), 16 (RGB565), 32 (ARGB8888)*/
-#define LV_COLOR_DEPTH     32
+#define LV_COLOR_DEPTH     16
 
 /*Swap the 2 bytes of RGB565 color. Useful if the display has a 8 bit interface (e.g. SPI)*/
-#define LV_COLOR_16_SWAP   0
+#define LV_COLOR_16_SWAP   1
 
 /*Enable more complex drawing routines to manage screens transparency.
  *Can be used if the UI is above an other layer, e.g. an OSD menu or video player.
  *Requires `LV_COLOR_DEPTH = 32` colors and the screen's `bg_opa` should be set to non LV_OPA_COVER value*/
 #define LV_COLOR_SCREEN_TRANSP    0
 
@@ -36,13 +36,13 @@
 
 /*=========================
    MEMORY SETTINGS
  *=========================*/
 
 /*1: use custom malloc/free, 0: use the built-in `lv_mem_alloc()` and `lv_mem_free()`*/
-#define LV_MEM_CUSTOM      0
+#define LV_MEM_CUSTOM      1
 #if LV_MEM_CUSTOM == 0
 /*Size of the memory available for `lv_mem_alloc()` in bytes (>= 2kB)*/
 #  define LV_MEM_SIZE    (32U * 1024U)          /*[bytes]*/
 
 /*Set an address for the memory pool instead of allocating it as a normal array. Can be in external SRAM too.*/
 #  define LV_MEM_ADR          0     /*0: unused*/
@@ -183,13 +183,13 @@
 
 /*-------------
  * Others
  *-----------*/
 
 /*1: Show CPU usage and FPS count in the right bottom corner*/
-#define LV_USE_PERF_MONITOR     0
+#define LV_USE_PERF_MONITOR     1
 
 /*1: Show the used memory and the memory fragmentation  in the left bottom corner
  * Requires LV_MEM_CUSTOM = 0*/
 #define LV_USE_MEM_MONITOR      0
 
 /*1: Draw random colored rectangles over the redrawn areas*/

完整示例代码

xradio-skylark-sdk\project\demo\lvgl_demo\prj_config.h

--- 
+++ 
@@ -137,11 +137,26 @@
 /* net pm mode enable/disable */
 #define PRJCONF_NET_PM_EN               1
 
 /* environment variable "TZ" for time zone setting */
 #define PRJCONF_ENV_TZ                  "TZ=GMT-8"
 
+/*
+ * project gpio config
+ */
+
+/* lcd device config */
+#define PRJCONF_DEVICE_LCD_SPI_PORT				SPI1
+#define PRJCONF_DEVICE_LCD_BL_GPIO_PORT			GPIO_PORT_A	
+#define PRJCONF_DEVICE_LCD_BL_GPIO_PIN			    GPIO_PIN_22
+
+#define PRJCONF_DEVICE_LCD_RST_GPIO_PORT		    GPIO_PORT_A	
+#define PRJCONF_DEVICE_LCD_RST_GPIO_PIN			GPIO_PIN_19
+
+#define PRJCONF_DEVICE_LCD_MODE_GPIO_PORT		    GPIO_PORT_A	
+#define PRJCONF_DEVICE_LCD_MODE_GPIO_PIN		    GPIO_PIN_20
+
 #ifdef __cplusplus
 }
 #endif
 
 #endif /* _PRJ_CONFIG_H_ */

xradio-skylark-sdk\project\demo\lvgl_demo\main.c 

/**
******************************************************************************
* @文件		main.c
* @版本		V1.0.0
* @日期
* @概要		
* @作者		lmx
******************************************************************************
* @注意
*
*
******************************************************************************
*/
#include "common/framework/platform_init.h"
#include <string.h>
#include <stdio.h>
#include "prj_config.h"
#include "kernel/os/os.h"
#include "lvgl/lvgl.h"
#include "lvgl-drivers/lv_port_disp.h"
#include "library/inc/lcd_st7789.h"

int main(void)
{
	static lcd_device_t lcd;
	lcd_para_t lcd_para;
	
	platform_init();
	
	memset(&lcd_para, 0, sizeof(lcd_para_t));
	lcd_para.dir 		= 0;
	lcd_para.spi.ssel 	= SPI_TCTRL_SS_SEL_SS0;
	lcd_para.spi.port	= PRJCONF_DEVICE_LCD_SPI_PORT;
	lcd_para.blk.port	= PRJCONF_DEVICE_LCD_BL_GPIO_PORT;
	lcd_para.blk.pin	= PRJCONF_DEVICE_LCD_BL_GPIO_PIN;
	lcd_para.rst.port	= PRJCONF_DEVICE_LCD_RST_GPIO_PORT;
	lcd_para.rst.pin	= PRJCONF_DEVICE_LCD_RST_GPIO_PIN;
	lcd_para.cmd.port	= PRJCONF_DEVICE_LCD_MODE_GPIO_PORT;
	lcd_para.cmd.pin	= PRJCONF_DEVICE_LCD_MODE_GPIO_PIN;
	register_operations_st7789(&lcd);
	
	lcd.init(&lcd_para);
	lcd.set_brightness(255);
	
	lv_init(); 
	lv_port_disp_init(&lcd);
	lv_tick_handle_init();
	
	lv_example_bar_6();	
	lv_example_btn_1();

	while(1)
	{
		OS_Sleep(3);
	}
	
	return 0;
}

【学习笔记】XR872 GUI Littlevgl 8.0 移植(显示部分)

附带 LCD 驱动文件

/**
******************************************************************************
* @文件		lcd_device.h
* @版本		V1.0.0
* @日期
* @概要		lcd device interface definition
* @作者		lmx
******************************************************************************
* @注意
*
* 
*
******************************************************************************
*/
#ifndef __LCD_DEVICE_H__
#define __LCD_DEVICE_H__

typedef struct{
	unsigned int ssel;			// SPI 片选号
	unsigned int port;			// SPI 端口号
}lcd_spi_t;

typedef struct{
	unsigned int port;			// GPIO 端口号
	unsigned int pin;			// GPIO 引脚号
}lcd_gpio_t;

typedef struct{
	unsigned char   dir;		// 显示方向:横屏\竖屏
	lcd_spi_t		spi;		// SPI 配置
	lcd_gpio_t		rst;		// 复位引脚配置
	lcd_gpio_t		blk;		// 背光引脚控制
	lcd_gpio_t		cmd;		// 命令数据切换
}lcd_para_t;

typedef struct{
	const char *name;			// 显示屏名称
	unsigned int hor;			// 水平长度
	unsigned int ver;			// 垂直长度
}lcd_info_t;

typedef struct{
	int (*init)(lcd_para_t *para);								// 初始化
	int (*release)();											// 释放设备
	int (*get_info)(lcd_info_t *info);							// 获取信息
	int (*set_brightness)(unsigned char val);					// 背光设置
	int (*set_rotation)(unsigned char angle);					// 设置方向
	int (*set_window)(unsigned short x1, unsigned short x2, unsigned short y1, unsigned short y2);// 设置窗口
	int (*brush)(void *pdata, unsigned int size);				// 绘制矩形 	
}lcd_device_t;

#endif
/**
******************************************************************************
* @文件		lcd_st7789.h
* @版本		V1.0.0
* @日期
* @概要		st7789 driver
* @作者		lmx
******************************************************************************
* @注意
*
* 
*
******************************************************************************
*/
#ifndef __LCD_ST7789_H__
#define __LCD_ST7789_H__

#include "lcd_device.h"
#include "driver/chip/hal_spi.h"

int register_operations_st7789(lcd_device_t *device);

#endif
/**
******************************************************************************
* @文件		lcd_st7789.h
* @版本		V1.0.0
* @日期
* @概要		st7789 driver
* @作者		lmx
******************************************************************************
* @注意
*
* 
*
******************************************************************************
*/
#include <stdio.h>
#include <string.h>
#include "lcd_st7789.h"
#include "kernel/os/os.h"
#include "driver/chip/hal_clock.h"

#define iprintf(fmt, arg...)	printf("[st7789] [inf] "fmt, ##arg)
#define eprintf(fmt, arg...)	printf("[st7789] [err] "fmt, ##arg)

// 大小端转换
#define LITTLE_ENDIAN_32(_VAL_) (((_VAL_ & 0x000000ff) << 24 ) | ((_VAL_ & 0x0000ff00) << 8) | ((_VAL_ & 0x00ff0000) >> 8) | ((_VAL_ & 0xff000000 ) >> 24))
#define LITTLE_ENDIAN_16(_VAL_) (((_VAL_ & 0x00ff) << 8 ) | ((_VAL_ & 0xff00) >> 8))

// 复位控制
#define RESET_ENABLE()			HAL_GPIO_WritePin(lcd_para.rst.port, lcd_para.rst.pin, GPIO_PIN_LOW)
#define RESET_DISABLE()			HAL_GPIO_WritePin(lcd_para.rst.port, lcd_para.rst.pin, GPIO_PIN_HIGH)

// 背光控制			
#define BRIGHTNESS_ENABLE()		HAL_GPIO_WritePin(lcd_para.blk.port, lcd_para.blk.pin, GPIO_PIN_HIGH)
#define BRIGHTNESS_DISABLE()	HAL_GPIO_WritePin(lcd_para.blk.port, lcd_para.blk.pin, GPIO_PIN_LOW)

// 命令模式
#define ENTER_COMMAND_MODE()	HAL_GPIO_WritePin(lcd_para.cmd.port, lcd_para.cmd.pin, GPIO_PIN_LOW)
#define ENTER_DATA_MODE()		HAL_GPIO_WritePin(lcd_para.cmd.port, lcd_para.cmd.pin, GPIO_PIN_HIGH)

// 参数配置
static lcd_para_t lcd_para;

static void dump_hex(char *table, void *data, unsigned int length)
{
	printf("dump:begin->table:[%s][%d]---------------\n", table, length);
	length = length > 16 ? 16 : length;
	for(unsigned int i = 0; i < length; i++){
		printf("0x%.2X ", ((unsigned char*)data)[i]);
	}
	printf("\ndump:end  ->table:[%s][%d]---------------\n", table, length);
}

// 传输命令
static int spi_transmit_command(void *command, unsigned int length)
{
	ENTER_COMMAND_MODE();
//	dump_hex("command", command, length);
	HAL_SPI_CS(lcd_para.spi.port, 1);
	if (HAL_SPI_Transmit(lcd_para.spi.port, command, length) != HAL_OK) {
		HAL_SPI_CS(lcd_para.spi.port, 0);
		return -1;
	}
	HAL_SPI_CS(lcd_para.spi.port, 0);
	
	return 0;
}

// 传输数据
static int spi_transmit_data(void *data, unsigned int length)
{
	ENTER_DATA_MODE();
//	dump_hex("data", data, length);
	HAL_SPI_CS(lcd_para.spi.port, 1);
	if (HAL_SPI_Transmit(lcd_para.spi.port, data, length) != HAL_OK) {
		HAL_SPI_CS(lcd_para.spi.port, 0);
		return -1;
	}
	HAL_SPI_CS(lcd_para.spi.port, 0);
	
	return 0;
}

// 传输单个命令
static int spi_transmit_reg(unsigned char reg)
{
	return spi_transmit_command(&reg, sizeof(unsigned char));
}

// 传输单个数据
static int spi_transmit_val(unsigned char val)
{
	return spi_transmit_data(&val, sizeof(unsigned char));
}

// 背光控制
static int lcd_set_brightness(unsigned char val)
{
	val ? BRIGHTNESS_ENABLE() : BRIGHTNESS_DISABLE();
	return 0;
}

// 显示方向
static int lcd_set_rotation(unsigned char angle)
{
	lcd_para.dir = angle;
	spi_transmit_reg(0x36);
	switch(lcd_para.dir){
		case 0:		spi_transmit_val(0x00); break;
		case 1:		spi_transmit_val(0xC0); break;
		case 2:		spi_transmit_val(0x70); break;
		case 3:		spi_transmit_val(0xA0); break;
		default: 	spi_transmit_val(0x00); break;
	}
	return 0;
}

// 设置绘制的窗口
static int lcd_set_window(unsigned short x1, unsigned short y1, unsigned short x2, unsigned short y2)
{
	unsigned int x = 0;
	unsigned int y = 0;
	
	switch(lcd_para.dir)
	{
		case 0:	// 竖屏
			x = x1 << 16 | x2;
			y = y1 << 16 | y2;
			break;
		
		case 1:	// 竖屏
			x = x1 << 16 | x2;
			y = (y1 + 80) << 16 | (y2 + 80);
			break;
			
		case 2: // 横屏
			x = x1 << 16 | x2;
			y = y1 << 16 | y2;
			break;
			
		case 3: // 横屏
			x = (x1 + 80) << 16 | (x2 + 80);
			y = y1 << 16 | y2;
			break;
			
		default:
			x = x1 << 16 | x2;
			y = y1 << 16 | y2;
			break;
	}

	x = LITTLE_ENDIAN_32(x);
	y = LITTLE_ENDIAN_32(y);
	
	spi_transmit_reg(0x2a);//列地址设置
	spi_transmit_data(&x, sizeof(unsigned int));
	spi_transmit_reg(0x2b);//行地址设置
	spi_transmit_data(&y, sizeof(unsigned int));
	spi_transmit_reg(0x2c);//储存器写

	return 0;
}

// 获取显示屏信息
static int lcd_get_info(lcd_info_t *info)
{
	info->name = "ST7789";
	info->hor = 240;
	info->ver = 240;
	
	return 0;
}

// 刷入显存(需要调整高低字节)
static int lcd_brush(void *pdata, unsigned int size)
{
	return spi_transmit_data(pdata, size);
}

// 引脚初始化
static int gpio_init()
{
	GPIO_InitParam param;
	param.driving = GPIO_DRIVING_LEVEL_1;
	param.mode = GPIOx_Pn_F1_OUTPUT;
	param.pull = GPIO_PULL_NONE;
	
	HAL_GPIO_Init(lcd_para.blk.port, lcd_para.blk.pin, &param);
	HAL_GPIO_WritePin(lcd_para.blk.port, lcd_para.blk.pin, GPIO_PIN_LOW);
	
	HAL_GPIO_Init(lcd_para.rst.port, lcd_para.rst.pin, &param);
	HAL_GPIO_WritePin(lcd_para.rst.port, lcd_para.rst.pin, GPIO_PIN_LOW);
	
	HAL_GPIO_Init(lcd_para.cmd.port, lcd_para.cmd.pin, &param);
	HAL_GPIO_WritePin(lcd_para.cmd.port, lcd_para.cmd.pin, GPIO_PIN_LOW);
	
	return 0;
}

// 引脚释放
static int gpio_deinit()
{
	HAL_GPIO_WritePin(lcd_para.blk.port, lcd_para.blk.pin, GPIO_PIN_LOW);
	HAL_GPIO_WritePin(lcd_para.cmd.port, lcd_para.cmd.pin, GPIO_PIN_LOW);
	HAL_GPIO_WritePin(lcd_para.rst.port, lcd_para.rst.pin, GPIO_PIN_LOW);
	
	HAL_GPIO_DeInit(lcd_para.blk.port, lcd_para.blk.pin);
	HAL_GPIO_DeInit(lcd_para.rst.port, lcd_para.rst.pin);
	HAL_GPIO_DeInit(lcd_para.cmd.port, lcd_para.cmd.pin);
	return 0;
}

// 通信初始化
static int spi_init()
{
	SPI_Global_Config spi_param;
	spi_param.cs_level = 0;
	spi_param.mclk = HAL_GetCPUClock();
	if(HAL_SPI_Init(lcd_para.spi.port, &spi_param) != HAL_OK){
		return -1;
	}
	
	SPI_Config spi_Config;
	spi_Config.firstBit = SPI_TCTRL_FBS_MSB;
	spi_Config.mode = SPI_CTRL_MODE_MASTER;
	spi_Config.opMode = SPI_OPERATION_MODE_DMA;
	spi_Config.sclk = HAL_GetCPUClock() / 4;
	spi_Config.sclkMode = SPI_SCLK_Mode0;
	if (HAL_SPI_Open(lcd_para.spi.port, lcd_para.spi.ssel, &spi_Config, 1000) != HAL_OK) {
		return -1;
	}
	
	HAL_SPI_Config(lcd_para.spi.port, SPI_ATTRIBUTION_IO_MODE, SPI_IO_MODE_NORMAL);
	HAL_SPI_CS(lcd_para.spi.port, 0);
	
	return 0;
}

// 通信释放
static int spi_deinit()
{
	HAL_SPI_CS(lcd_para.spi.port, 0);
	HAL_SPI_Close(lcd_para.spi.port);
	HAL_SPI_Deinit(lcd_para.spi.port);
	
	return 0;
}

// 屏驱初始化
static int st7789_init()
{
	BRIGHTNESS_ENABLE();
	OS_MSleep(100);
	
	RESET_ENABLE();
	OS_MSleep(100);
	RESET_DISABLE();
	OS_MSleep(100);
	
	spi_transmit_reg(0x11); 	//Sleep out 
	OS_MSleep(120);             //Delay 120ms 
	
	spi_transmit_reg(0x36);
	switch(lcd_para.dir){
		case 0:		spi_transmit_val(0x00); break;
		case 1:		spi_transmit_val(0xC0); break;
		case 2:		spi_transmit_val(0x70); break;
		case 3:		spi_transmit_val(0xA0); break;
		default: 	spi_transmit_val(0x00); break;
	}
	
	spi_transmit_reg(0x3A);			
	spi_transmit_val(0x05);

	spi_transmit_reg(0xB2);			
	spi_transmit_val(0x0C);
	spi_transmit_val(0x0C); 
	spi_transmit_val(0x00); 
	spi_transmit_val(0x33); 
	spi_transmit_val(0x33); 			

	spi_transmit_reg(0xB7);			
	spi_transmit_val(0x35);

	spi_transmit_reg(0xBB);			
	spi_transmit_val(0x32); //Vcom=1.35V
					
	spi_transmit_reg(0xC2);
	spi_transmit_val(0x01);

	spi_transmit_reg(0xC3);			
	spi_transmit_val(0x15); //GVDD=4.8V  颜色深度
				
	spi_transmit_reg(0xC4);			
	spi_transmit_val(0x20); //VDV, 0x20:0v

	spi_transmit_reg(0xC6);			
	spi_transmit_val(0x0F); //0x0F:60Hz        	

	spi_transmit_reg(0xD0);			
	spi_transmit_val(0xA4);
	spi_transmit_val(0xA1); 

	spi_transmit_reg(0xE0);
	spi_transmit_val(0xD0);   
	spi_transmit_val(0x08);   
	spi_transmit_val(0x0E);   
	spi_transmit_val(0x09);   
	spi_transmit_val(0x09);   
	spi_transmit_val(0x05);   
	spi_transmit_val(0x31);   
	spi_transmit_val(0x33);   
	spi_transmit_val(0x48);   
	spi_transmit_val(0x17);   
	spi_transmit_val(0x14);   
	spi_transmit_val(0x15);   
	spi_transmit_val(0x31);   
	spi_transmit_val(0x34);   

	spi_transmit_reg(0xE1);     
	spi_transmit_val(0xD0);   
	spi_transmit_val(0x08);   
	spi_transmit_val(0x0E);   
	spi_transmit_val(0x09);   
	spi_transmit_val(0x09);   
	spi_transmit_val(0x15);   
	spi_transmit_val(0x31);   
	spi_transmit_val(0x33);   
	spi_transmit_val(0x48);   
	spi_transmit_val(0x17);   
	spi_transmit_val(0x14);   
	spi_transmit_val(0x15);   
	spi_transmit_val(0x31);   
	spi_transmit_val(0x34);
	spi_transmit_reg(0x21); 

	spi_transmit_reg(0x29);
	
	return 0;
}

// 初始化设备
static int lcd_init(lcd_para_t *para)
{
	memcpy(&lcd_para, para, sizeof(lcd_para_t));
	
	if(spi_init()){
		eprintf("spi interface failed...");
		return -1;
	}
	
	if(gpio_init()){
		eprintf("gpio interface failed...");
		return -1;
	}
	
	st7789_init();
	return 0;
}

// 释放设备
static int lcd_release()
{
	spi_deinit();
	gpio_deinit();
	return 0;
}

// 注册回调
int register_operations_st7789(lcd_device_t *device)
{
	memset(device, 0, sizeof(lcd_device_t));
	device->init 			= lcd_init;
	device->get_info		= lcd_get_info;
	device->set_brightness 	= lcd_set_brightness;
	device->set_rotation	= lcd_set_rotation;
	device->set_window		= lcd_set_window;
	device->brush			= lcd_brush;
	device->release 		= lcd_release;
	return 0;
}

 

上一篇:Most_important


下一篇:MacOS M1芯片 Transmit5破解