计算机网络针对交换机的配置

  • 交换机VLAN配置

拓扑结构

配置主机的IP地址

配置交换机的VLAN

Switch>en

Switch#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

Switch(vlan)#vlan 10

VLAN 10 added:

Name: VLAN0010

Switch(vlan)#vlan 20

VLAN 20 added:

Name: VLAN0020

Switch(vlan)#vlan 30

VLAN 30 added:

Name: VLAN0030

Switch(vlan)#vlan 40

VLAN 10 added:

Name: VLAN0040

Switch(vlan)#exit

APPLY completed.

Exiting....

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#int f0/1

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 10

Switch(config-if)#int f0/4

Switch(config-if)#switchport mode access

Switch(config-if)#switchport access vlan 10

Switch(config-if)#int range f0/2-3

Switch(config-if-range)#switchport mode access

Switch(config-if-range)#switchport access vlan 20

Switch(config-if-range)#exit

Switch(config)#

Switch(config)#end

Switch#

%SYS-5-CONFIG_I: Configured from console by console

Switch#show vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12

Fa0/13, Fa0/14, Fa0/15, Fa0/16

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24

10 VLAN0010 active Fa0/1, Fa0/2

20 VLAN0020 active Fa0/3, Fa0/4

1002 fddi-default act/unsup

1003 token-ring-default act/unsup

1004 fddinet-default act/unsup

1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

10 enet 100010 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 tr 101003 1500 - - - - - 0 0

--More--

Ping测试主机与交换机的连接

上一篇:I2C,UART,SPI(STM32、51单片机)


下一篇:[计算机网络] 当输入网址到网页