/*

  This is a minimal sketch without using the library at all but only works for

  the 10 pole dip switch sockets. It saves a lot of memory and thus might be

  very useful to use with ATTinys :)

  https://github.com/sui77/rc-switch/

*/

int RCLpin = 7;

void setup() {

    pinMode(RCLpin, OUTPUT);

}

void loop() {

    RCLswitch(0b010001000001);  // DIPs an Steckdose: 0100010000 An:01

    delay(2000);

    RCLswitch(0b010001000010);  // DIPs an Steckdose: 0100010000 Aus:10

    delay(2000);

}

void RCLswitch(uint16_t code) {

    for (int nRepeat=0; nRepeat<6; nRepeat++) {

        for (int i=4; i<16; i++) {

            RCLtransmit(1,3);

            if (((code << (i-4)) & 2048) > 0) {

                RCLtransmit(1,3);

            } else {

                RCLtransmit(3,1);

            }

        }

        RCLtransmit(1,31);

    }

}

void RCLtransmit(int nHighPulses, int nLowPulses) {

    digitalWrite(RCLpin, HIGH);

    delayMicroseconds( 350 * nHighPulses);

    digitalWrite(RCLpin, LOW);

    delayMicroseconds( 350 * nLowPulses);

}