celery守护进程(Shell 脚本方式)
django + redis + celery
redis同时作为broker和backend
- 脚本名字 : celeryd
在 /etc/init.d/新建celeryd
命令使用方法 :
/etc/init.d/celeryd {start|stop|restart|status}
配置文件 :
/etc/default/celeryd
- 编写worker启动脚本
此文件直接粘贴到/etc/init.d/celeryd, 通用, 文件来自celery官网
#!/bin/sh -e
# ============================================
# celeryd - Starts the Celery worker daemon.
# ============================================
#
# :Usage: /etc/init.d/celeryd {start|stop|force-reload|restart|try-restart|status}
# :Configuration file: /etc/default/celeryd (or /usr/local/etc/celeryd on BSD)
#
# See http://docs.celeryproject.org/en/latest/userguide/daemonizing.html#generic-init-scripts
### BEGIN INIT INFO
# Provides: celeryd
# Required-Start: $network $local_fs $remote_fs
# Required-Stop: $network $local_fs $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: celery task worker daemon
### END INIT INFO
#
#
# To implement separate init-scripts, copy this script and give it a different
# name. That is, if your new application named "little-worker" needs an init,
# you should use:
#
# cp /etc/init.d/celeryd /etc/init.d/little-worker
#
# You can then configure this by manipulating /etc/default/little-worker.
#
VERSION=10.1
echo "celery init v${VERSION}."
if [ $(id -u) -ne 0 ]; then
echo "Error: This program can only be used by the root user."
echo " Unprivileged users must use the 'celery multi' utility, "
echo " or 'celery worker --detach'."
exit 1
fi
origin_is_runlevel_dir () {
set +e
dirname $0 | grep -q "/etc/rc.\.d"
echo $?
}
# Can be a runlevel symlink (e.g., S02celeryd)
if [ $(origin_is_runlevel_dir) -eq 0 ]; then
SCRIPT_FILE=$(readlink "$0")
else
SCRIPT_FILE="$0"
fi
SCRIPT_NAME="$(basename "$SCRIPT_FILE")"
DEFAULT_USER="celery"
DEFAULT_PID_FILE="/var/run/celery/%n.pid"
DEFAULT_LOG_FILE="/var/log/celery/%n%I.log"
DEFAULT_LOG_LEVEL="INFO"
DEFAULT_NODES="celery"
DEFAULT_CELERYD="-m celery worker --detach"
if [ -d "/etc/default" ]; then
CELERY_CONFIG_DIR="/etc/default"
else
CELERY_CONFIG_DIR="/usr/local/etc"
fi
# 配置文件的位置
CELERY_DEFAULTS=${CELERY_DEFAULTS:-"$CELERY_CONFIG_DIR/${SCRIPT_NAME}"}
# Make sure executable configuration script is owned by root
_config_sanity() {
local path="$1"
local owner=$(ls -ld "$path" | awk '{print $3}')
local iwgrp=$(ls -ld "$path" | cut -b 6)
local iwoth=$(ls -ld "$path" | cut -b 9)
if [ "$(id -u $owner)" != "0" ]; then
echo "Error: Config script '$path' must be owned by root!"
echo
echo "Resolution:"
echo "Review the file carefully, and make sure it hasn't been "
echo "modified with mailicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change ownership of the script:"
echo " $ sudo chown root '$path'"
exit 1
fi
if [ "$iwoth" != "-" ]; then # S_IWOTH
echo "Error: Config script '$path' cannot be writable by others!"
echo
echo "Resolution:"
echo "Review the file carefully, and make sure it hasn't been "
echo "modified with malicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change the scripts permissions:"
echo " $ sudo chmod 640 '$path'"
exit 1
fi
if [ "$iwgrp" != "-" ]; then # S_IWGRP
echo "Error: Config script '$path' cannot be writable by group!"
echo
echo "Resolution:"
echo "Review the file carefully, and make sure it hasn't been "
echo "modified with malicious intent. When sure the "
echo "script is safe to execute with superuser privileges "
echo "you can change the scripts permissions:"
echo " $ sudo chmod 640 '$path'"
exit 1
fi
}
if [ -f "$CELERY_DEFAULTS" ]; then
_config_sanity "$CELERY_DEFAULTS"
echo "Using config script: $CELERY_DEFAULTS"
# 加载配置文件的信息到该脚本程序中
. "$CELERY_DEFAULTS"
fi
# Sets --app argument for CELERY_BIN
CELERY_APP_ARG=""
if [ ! -z "$CELERY_APP" ]; then
CELERY_APP_ARG="--app=$CELERY_APP"
fi
# Options to su
# can be used to enable login shell (CELERYD_SU_ARGS="-l"),
# or even to use start-stop-daemon instead of su.
CELERYD_SU=${CELERY_SU:-"su"}
CELERYD_SU_ARGS=${CELERYD_SU_ARGS:-""}
CELERYD_USER=${CELERYD_USER:-$DEFAULT_USER}
# Set CELERY_CREATE_DIRS to always create log/pid dirs.
CELERY_CREATE_DIRS=${CELERY_CREATE_DIRS:-0}
CELERY_CREATE_RUNDIR=$CELERY_CREATE_DIRS
CELERY_CREATE_LOGDIR=$CELERY_CREATE_DIRS
if [ -z "$CELERYD_PID_FILE" ]; then
CELERYD_PID_FILE="$DEFAULT_PID_FILE"
CELERY_CREATE_RUNDIR=1
fi
if [ -z "$CELERYD_LOG_FILE" ]; then
CELERYD_LOG_FILE="$DEFAULT_LOG_FILE"
CELERY_CREATE_LOGDIR=1
fi
CELERYD_LOG_LEVEL=${CELERYD_LOG_LEVEL:-${CELERYD_LOGLEVEL:-$DEFAULT_LOG_LEVEL}}
CELERY_BIN=${CELERY_BIN:-"celery"}
CELERYD_MULTI=${CELERYD_MULTI:-"$CELERY_BIN multi"}
CELERYD_NODES=${CELERYD_NODES:-$DEFAULT_NODES}
export CELERY_LOADER
if [ -n "$2" ]; then
CELERYD_OPTS="$CELERYD_OPTS $2"
fi
CELERYD_LOG_DIR=`dirname $CELERYD_LOG_FILE`
CELERYD_PID_DIR=`dirname $CELERYD_PID_FILE`
# Extra start-stop-daemon options, like user/group.
if [ -n "$CELERYD_CHDIR" ]; then
DAEMON_OPTS="$DAEMON_OPTS --workdir=$CELERYD_CHDIR"
fi
check_dev_null() {
if [ ! -c /dev/null ]; then
echo "/dev/null is not a character device!"
exit 75 # EX_TEMPFAIL
fi
}
maybe_die() {
if [ $? -ne 0 ]; then
echo "Exiting: $* (errno $?)"
exit 77 # EX_NOPERM
fi
}
create_default_dir() {
if [ ! -d "$1" ]; then
echo "- Creating default directory: '$1'"
mkdir -p "$1"
maybe_die "Couldn't create directory $1"
echo "- Changing permissions of '$1' to 02755"
chmod 02755 "$1"
maybe_die "Couldn't change permissions for $1"
if [ -n "$CELERYD_USER" ]; then
echo "- Changing owner of '$1' to '$CELERYD_USER'"
chown "$CELERYD_USER" "$1"
maybe_die "Couldn't change owner of $1"
fi
if [ -n "$CELERYD_GROUP" ]; then
echo "- Changing group of '$1' to '$CELERYD_GROUP'"
chgrp "$CELERYD_GROUP" "$1"
maybe_die "Couldn't change group of $1"
fi
fi
}
check_paths() {
if [ $CELERY_CREATE_LOGDIR -eq 1 ]; then
create_default_dir "$CELERYD_LOG_DIR"
fi
if [ $CELERY_CREATE_RUNDIR -eq 1 ]; then
create_default_dir "$CELERYD_PID_DIR"
fi
}
create_paths() {
create_default_dir "$CELERYD_LOG_DIR"
create_default_dir "$CELERYD_PID_DIR"
}
export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"
_get_pidfiles () {
# note: multi < 3.1.14 output to stderr, not stdout, hence the redirect.
${CELERYD_MULTI} expand "${CELERYD_PID_FILE}" ${CELERYD_NODES} 2>&1
}
_get_pids() {
found_pids=0
my_exitcode=0
for pidfile in $(_get_pidfiles); do
local pid=`cat "$pidfile"`
local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
echo "bad pid file ($pidfile)"
one_failed=true
my_exitcode=1
else
found_pids=1
echo "$pid"
fi
if [ $found_pids -eq 0 ]; then
echo "${SCRIPT_NAME}: All nodes down"
exit $my_exitcode
fi
done
}
_chuid () {
${CELERYD_SU} ${CELERYD_SU_ARGS} "$CELERYD_USER" -c "$CELERYD_MULTI $*"
}
start_workers () {
if [ ! -z "$CELERYD_ULIMIT" ]; then
# 设置该程序打开文件数
ulimit -n $CELERYD_ULIMIT
fi
_chuid $* start $CELERYD_NODES $DAEMON_OPTS \
--pidfile="$CELERYD_PID_FILE" \
--logfile="$CELERYD_LOG_FILE" \
--loglevel="$CELERYD_LOG_LEVEL" \
$CELERY_APP_ARG \
$CELERYD_OPTS
}
dryrun () {
(C_FAKEFORK=1 start_workers --verbose)
}
stop_workers () {
_chuid stopwait $CELERYD_NODES --pidfile="$CELERYD_PID_FILE"
}
restart_workers () {
_chuid restart $CELERYD_NODES $DAEMON_OPTS \
--pidfile="$CELERYD_PID_FILE" \
--logfile="$CELERYD_LOG_FILE" \
--loglevel="$CELERYD_LOG_LEVEL" \
$CELERY_APP_ARG \
$CELERYD_OPTS
}
kill_workers() {
_chuid kill $CELERYD_NODES $DAEMON_OPTS --pidfile="$CELERYD_PID_FILE"
}
restart_workers_graceful () {
echo "WARNING: Use with caution in production"
echo "The workers will attempt to restart, but they may not be able to."
local worker_pids=
worker_pids=`_get_pids`
[ "$one_failed" ] && exit 1
for worker_pid in $worker_pids; do
local failed=
kill -HUP $worker_pid 2> /dev/null || failed=true
if [ "$failed" ]; then
echo "${SCRIPT_NAME} worker (pid $worker_pid) could not be restarted"
one_failed=true
else
echo "${SCRIPT_NAME} worker (pid $worker_pid) received SIGHUP"
fi
done
[ "$one_failed" ] && exit 1 || exit 0
}
check_status () {
my_exitcode=0
found_pids=0
local one_failed=
for pidfile in $(_get_pidfiles); do
if [ ! -r $pidfile ]; then
echo "${SCRIPT_NAME} down: no pidfiles found"
one_failed=true
break
fi
local node=`basename "$pidfile" .pid`
local pid=`cat "$pidfile"`
local cleaned_pid=`echo "$pid" | sed -e 's/[^0-9]//g'`
if [ -z "$pid" ] || [ "$cleaned_pid" != "$pid" ]; then
echo "bad pid file ($pidfile)"
one_failed=true
else
local failed=
kill -0 $pid 2> /dev/null || failed=true
if [ "$failed" ]; then
echo "${SCRIPT_NAME} (node $node) (pid $pid) is down, but pidfile exists!"
one_failed=true
else
echo "${SCRIPT_NAME} (node $node) (pid $pid) is up..."
fi
fi
done
[ "$one_failed" ] && exit 1 || exit 0
}
case "$1" in
start)
check_dev_null
check_paths
start_workers
;;
stop)
check_dev_null
check_paths
stop_workers
;;
reload|force-reload)
echo "Use restart"
;;
status)
check_status
;;
restart)
check_dev_null
check_paths
restart_workers
;;
graceful)
check_dev_null
restart_workers_graceful
;;
kill)
check_dev_null
kill_workers
;;
dryrun)
check_dev_null
dryrun
;;
try-restart)
check_dev_null
check_paths
restart_workers
;;
create-paths)
check_dev_null
create_paths
;;
check-paths)
check_dev_null
check_paths
;;
*)
echo "Usage: /etc/init.d/${SCRIPT_NAME} {start|stop|restart|graceful|kill|dryrun|create-paths}"
exit 64 # EX_USAGE
;;
esac
exit 0
celeryd
改变权限:
chmod +x /etc/init.d/celeryd
- 编写worker的配置文件，位置：/etc/default/celeryd
# 节点名字【标识作用】，日志也会以这个名字开头，自定义即可，启动多个的写法：CELERYD_NODES="worker1 worker2 worker3" 或 CELERYD_NODES=10
CELERYD_NODES="worker1"
# 配置celery的位置，查看位置：which celery
CELERY_BIN="/usr/local/bin/celery"
# 配置实例化app，一般指的创建app实例的文件，django项目则配置项目名，完整的配置方法：CELERY_APP="proj.tasks:app"
# 这里写自己django的项目名字即可
CELERY_APP="proj"
# 进入哪个workerr的目录 绝对路径: django项目比如结构是: /home/mypro/mypro/celery.py 那这里填的就是如下所示
CELERYD_CHDIR="/home/mypro/mypro/"
# --time-limit ： 限制处理任务的时长
# --concurrency ： 设置最高的并发数
# 多个启动worker,对每个woker进行单独的配置方法：CELERYD_OPTS="--time-limit=300 -c 8 -c:worker2 4 -c:worker3 2 -Ofair:worker1"
CELERYD_OPTS=" --time-limit=300 --concurrency=8"
# 设置日志的级别：开发环境：DEBUG，生产环境：INFO
CELERYD_LOG_LEVEL="DEBUG"
# 设置存放目志位置
CELERYD_LOG_FILE="/var/log/celery/%n%I.log"
# 设置启动程序存放pid文件
CELERYD_PID_FILE="/var/run/celery/%n.pid"
# 设置启动程序的用户，需要手动创建用户和组
CELERYD_USER="runyi"
CELERYD_GROUP="runyi"
# 1：自动创建需要的目录文件并且设置运行程序所需的用户和组，0：需要手动处理
CELERY_CREATE_DIRS=1
# 设置celery最大的文件打开数
CELERYD_ULIMIT=65535
# 指明django的配置文件
export DJANGO_SETTINGS_MODULE="settings"
# 导出路径
export PYTHONPATH="$PYTHONPATH:/home/mypro"
- 创建celery用户和组
useradd celery
- 启动
root@hecs01:/var/log# /etc/init.d/celeryd start
celery init v10.1.
Using config script: /etc/default/celeryd
- Creating default directory: '/var/log/celery'
- Changing permissions of '/var/log/celery' to 02755
- Changing owner of '/var/log/celery' to 'celery'
- Changing group of '/var/log/celery' to 'celery'
- Creating default directory: '/var/run/celery'
- Changing permissions of '/var/run/celery' to 02755
- Changing owner of '/var/run/celery' to 'celery'
- Changing group of '/var/run/celery' to 'celery'
celery multi v5.0.5 (singularity)
> Starting nodes...
> worker1@hecs01: OK
- 检查启动的进程
root@hecs01:/var/log# ps -ef | grep python
root 590 1 0 18:06 ? 00:00:00 /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
root 788 1 0 18:06 ? 00:00:00 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
celery 2389 1 0 18:17 ? 00:00:03 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2392 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2393 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2394 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2395 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2396 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2397 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2398 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
celery 2399 2389 0 18:17 ? 00:00:00 /usr/bin/python3 -m celery --app=runyi --workdir=/home/runyi/runyi/runyi/ worker --pidfile=/var/run/celery/worker1.pid --logfile=/var/log/celery/worker1%I.log --loglevel=DEBUG --time-limit=300 --concurrency=8 -n worker1@hecs01 --executable=/usr/bin/python3
root 3215 2048 0 18:37 pts/2 00:00:00 grep --color=auto python
在配置的过程中遇到了许多问题,都一一记录在我的其他celery文章中,有问题可以去找找, 懒得贴了
抱拳