在原有3306端口mysqld服务的情况再搭建第二个3308端口的mysql实例

1 download the tar.gz
[root@472322 tmp]# wget http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.13.tar.gz/from/http://cdn.mysql.com/

--2013-09-11 22:04:52--  http://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.13.tar.gz/from/http://cdn.mysql.com/

Resolving dev.mysql.com... 137.254.60.11

Connecting to dev.mysql.com|137.254.60.11|:80... connected.

HTTP request sent, awaiting response... 302 Found

Location: http://cdn.mysql.com/Downloads/MySQL-5.6/mysql-5.6.13.tar.gz [following]

--2013-09-11 22:04:52--  http://cdn.mysql.com/Downloads/MySQL-5.6/mysql-5.6.13.tar.gz

Resolving cdn.mysql.com... 23.3.96.242, 23.3.96.235

Connecting to cdn.mysql.com|23.3.96.242|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 35951160 (34M) [application/x-tar-gz]

Saving to: 鈥渕ysql-5.6.13.tar.gz鈥

100%[=============================================================================================================================>] 35,951,160  1.57M/s   in 28s

2013-09-11 22:05:21 (1.21 MB/s) - 鈥渕ysql-5.6.13.tar.gz鈥saved [35951160/35951160]

2 安装cmake软件包
yum install cmake

3 create account of mysql
groupadd mysql           

useradd -g mysql mysql           

autoreconf --force --install

libtoolize --automake --force

automake --force --add-missing

4  complie the sources
mkdir -p /data56m1/m1

tar -xvf mysql-5.6.13.tar.gz

5 cmake
mkdir -p /usr/local/mysql56m1

mkdir -p /data56m1

 time cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql56m1 -DMYSQL_DATADIR=/data56m1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DMYSQL_UNIX_ADDR==/data56m1/mysql.sock -DMYSQL_USER=mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci


PS: 5.6.13源码安装是默认带federated引擎的,不过要生效,需要在my.cnf里面的mysqld选项里面加上启动参数federated。

[root@472322 mysql-5.6.13]#
 time cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql56m1 -DMYSQL_DATADIR=/data56m1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DMYSQL_UNIX_ADDR==/data56m1/mysql.sock -DMYSQL_USER=mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci

.........

-- Looking for sched_getcpu - found

-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS

-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS - Success

-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS_64

-- Performing Test HAVE_IB_GCC_ATOMIC_BUILTINS_64 - Success

-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC

-- Performing Test HAVE_IB_ATOMIC_PTHREAD_T_GCC - Success

-- Looking for asprintf

-- Looking for asprintf - found

-- Check size of pthread_t

-- Check size of pthread_t - done

-- Using cmake version 2.6.4

-- Not building NDB

-- Performing Test HAVE_PEERCRED

-- Performing Test HAVE_PEERCRED - Success

-- Library mysqlclient depends on OSLIBS -lpthread;m;rt;dl

-- Googlemock was not found. gtest-based unit tests will be disabled. You can run cmake . -DENABLE_DOWNLOADS=1 to automatically download and build required components from source.

-- If you are inside a firewall, you may need to use an http proxy: export http_proxy=http://foo.bar.com:80

-- Library mysqlserver depends on OSLIBS -lpthread;m;rt;crypt;dl

-- Configuring done

-- Generating done

-- Build files have been written to: /tmp/mysql-5.6.13

real    0m24.507s

user    0m13.984s

sys     0m7.372s

[root@472322 mysql-5.6.13]#

6 build the db directy
[root@472322 mysql-5.6.13]#
time make 

Scanning dependencies of target INFO_BIN

[  0%] Built target INFO_BIN

Scanning dependencies of target INFO_SRC

[  0%] Built target INFO_SRC

Scanning dependencies of target abi_check

[  0%] Built target abi_check

Scanning dependencies of target zlib

[  0%] Building C object zlib/CMakeFiles/zlib.dir/adler32.c.o

[  0%] Building C object zlib/CMakeFiles/zlib.dir/compress.c.o

[  0%] Building C object zlib/CMakeFiles/zlib.dir/crc32.c.o

[  0%] Building C object zlib/CMakeFiles/zlib.dir/deflate.c.o

......

Linking CXX static library libsql_embedded.a

[ 98%] Built target sql_embedded

[100%] Generating mysqlserver_depends.c

Scanning dependencies of target mysqlserver

[100%] Building C object libmysqld/CMakeFiles/mysqlserver.dir/mysqlserver_depends.c.o

Linking C static library libmysqld.a

/usr/bin/ar: creating /tmp/mysql-5.6.13/libmysqld/libmysqld.a

[100%] Built target mysqlserver

Scanning dependencies of target mysql_client_test_embedded

[100%] Building C object libmysqld/examples/CMakeFiles/mysql_client_test_embedded.dir/__/__/tests/mysql_client_test.c.o

Linking CXX executable mysql_client_test_embedded

[100%] Built target mysql_client_test_embedded

Scanning dependencies of target mysql_embedded

[100%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/completion_hash.cc.o

[100%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/mysql.cc.o

[100%] Building CXX object libmysqld/examples/CMakeFiles/mysql_embedded.dir/__/__/client/readline.cc.o

Linking CXX executable mysql_embedded

[100%] Built target mysql_embedded

Scanning dependencies of target mysqltest_embedded

[100%] Building CXX object libmysqld/examples/CMakeFiles/mysqltest_embedded.dir/__/__/client/mysqltest.cc.o

Linking CXX executable mysqltest_embedded

[100%] Built target mysqltest_embedded

Scanning dependencies of target my_safe_process

[100%] Building CXX object mysql-test/lib/My/SafeProcess/CMakeFiles/my_safe_process.dir/safe_process.cc.o

Linking CXX executable my_safe_process

[100%] Built target my_safe_process

real    18m11.448s

user    16m23.402s

sys     1m31.842s

[root@472322 mysql-5.6.13]#
time make install

......

-- Installing: /usr/local/mysql56m1/man/man1/mysqldump.1

-- Installing: /usr/local/mysql56m1/man/man1/mysql_config_editor.1

-- Installing: /usr/local/mysql56m1/man/man1/myisamlog.1

-- Installing: /usr/local/mysql56m1/man/man1/mysql-stress-test.pl.1

-- Installing: /usr/local/mysql56m1/man/man8/mysqld.8

-- Installing: /usr/local/mysql56m1/support-files/solaris/postinstall-solaris

real    0m22.927s

user    0m2.963s

sys     0m3.353s

7 init db & config my56m1.cnf
cd /usr/local/mysql56m1

chown -R mysql .

chgrp -R mysql .

cp support-files/my-default.cnf /etc/my56m1.cnf


vim /etc/my56m1.cnf

[client]
#password = your_password
port = 3308
socket = /data56m1/mysql3308.sock [mysqld]
port = 3308
socket = /data56m1/mysql3308.sock federated
log_bin = /data56m1/mysql-bin.log
log_bin_index = /data56m1/mysql-bin.log.index
relay-log = /data56m1/mysql-relay-bin
relay-log-index = /data56m1/mysql-relay-bin.index skip-external-locking
bind-address = 0.0.0.0 log_bin_trust_function_creators=1
binlog_format=mixed
log_slave_updates=1
innodb_flush_log_at_trx_commit = 0
log-error = /data56m1/error.err # These are commonly set, remove the # and set as required.sedir = /usr/local/mysql56m1
basedir = /usr/local/mysql56m1
datadir = /data56m1
log_error = /data56m1/error.err
innodb_file_per_table
server_id = 11 innodb_data_home_dir = /data56m1
innodb_data_file_path = ibdata01:1G:autoextend sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES

8 init db
[root@472322 mysql56m1]# scripts/mysql_install_db  --user=mysql --basedir=/usr/local/mysql56m1 --datadir=/data56m1 --defaults-file=/etc/my56m1.cnf

Installing MySQL system tables...2013-09-12 01:21:09 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).

OK

Filling help tables...2013-09-12 01:21:12 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).

OK

To start mysqld at boot time you have to copy

support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !

To do so, start the server, then issue the following commands:

/usr/local/mysql56m1/bin/mysqladmin -u root password 'new-password'

  /usr/local/mysql56m1/bin/mysqladmin -u root -h 472322.com password 'new-password'

Alternatively you can run:

  /usr/local/mysql56m1/bin/mysql_secure_installation

which will also give you the option of removing the test

databases and anonymous user created by default.  This is

strongly recommended for production servers

See the manual for more instructions.

You can start the MySQL daemon with:

  cd . ; /usr/local/mysql56m1/bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl

  cd mysql-test ; perl mysql-test-run.pl

Please report any problems with the ./bin/mysqlbug script!

The latest information about MySQL is available on the web at

  http://www.mysql.com

Support MySQL by buying support/licenses at http://shop.mysql.com


New default config file was created as /usr/local/mysql56m1/my.cnf and
will be used by default by the server when you start it.
You may edit this file to change server settings

 


9 copy start command
cp support-files/mysql.server /etc/init.d/mysqld56m1

chmod 700 /etc/init.d/mysqld56m1

echo "export PATH=$PATH:/usr/local/mysqld56m1/bin">>/etc/profile 

source /etc/profile

10 add command to system parameter
cd /data56m1

chkconfig --add mysqld56m1

11  start service 
service mysqld56m1 start

[root@472322 data56m1]# service mysqld56m1 start

Starting MySQL.. ERROR! The server quit without updating PID file (/data56m1/472322.com.pid).

11.1 check data directory
[root@472322 data56m1]# ll

total 1160456

-rw-r----- 1 mysql root        5037 Sep 12 03:07 472322.com.err

-rw-rw---- 1 mysql mysql         56 Sep 12 02:58 auto.cnf

-rw-rw---- 1 mysql mysql 1073741824 Sep 12 03:02 ibdata01

-rw-rw---- 1 mysql mysql   12582912 Sep 12 03:07 ibdata1

-rw-rw---- 1 mysql mysql   50331648 Sep 12 03:07 ib_logfile0

-rw-rw---- 1 mysql mysql   50331648 Sep 12 03:02 ib_logfile1

drwx------ 2 mysql mysql       4096 Sep 12 02:56 mysql

-rw-rw---- 1 mysql mysql      67100 Sep 12 02:56 mysql-bin.000001

-rw-rw---- 1 mysql mysql    1211196 Sep 12 02:56 mysql-bin.000002

-rw-rw---- 1 mysql mysql        143 Sep 12 03:02 mysql-bin.000003

-rw-rw---- 1 mysql mysql         81 Sep 12 02:58 mysql-bin.log.index

drwx------ 2 mysql mysql       4096 Sep 12 02:56 performance_schema

drwx------ 2 mysql mysql       4096 Sep 12 02:56 test

奇怪配置文件里面的error.err并没有出现,而是产生了一个472322.com.err的文件,那么十有八九就是/etc/my56m1.cnf没有起作用,否则,不可能没有error.err的而是默认的472322.com.err 日志

我在第8步的时候执行init db的时候,命令中指定了 scripts/mysql_install_db  --user=mysql --basedir=/usr/local/mysql56m1 --datadir=/data56m1 --defaults-file=/etc/my56m1.cnf  配置文件是/etc/my56m1.cnf啊

再去看第8步执行的日志信息:

看到如下信息:

New default config file was created as /usr/local/mysql56m1/my.cnf and

will be used by default by the server when you start it.

You may edit this file to change server settings


好像是说没有找到默认的basedir根目录下的my.cnf所以就自动创建了一个根目录的my.cnf。难道mysqld服务启动的时候没有识别--defaults-file参数?

11.2 check /etc/init.d/mysqld56m1 
打开/etc/init.d/mysqld56m1启动文件看看

extra_args=""

if test -r "$basedir/my.cnf"

then

  extra_args="-e $basedir/my.cnf"

else

  if test -r "$datadir/my.cnf"

  then

    extra_args="-e $datadir/my.cnf"

  fi

fi

...

# Get arguments from the my.cnf file,

# the only group, which is read from now on is [mysqld]

if test -x ./bin/my_print_defaults

then

  print_defaults="./bin/my_print_defaults"

elif test -x $bindir/my_print_defaults

then

  print_defaults="$bindir/my_print_defaults"

elif test -x $bindir/mysql_print_defaults

then

  print_defaults="$bindir/mysql_print_defaults"

else

  # Try to find basedir in /etc/my.cnf

  conf=/etc/my.cnf

  print_defaults=

  if test -r $conf

  then

    subpat='^[^=]*basedir[^=]*=\(.*\)$'

    dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`

    for d in $dirs

    do

      d=`echo $d | sed -e 's/[  ]//g'`

      if test -x "$d/bin/my_print_defaults"

      then

        print_defaults="$d/bin/my_print_defaults"

        break

      fi

      if test -x "$d/bin/mysql_print_defaults"

      then

        print_defaults="$d/bin/mysql_print_defaults"

        break

      fi

    done

  fi

# Hope it's in the PATH ... but I doubt it

  test -z "$print_defaults" && print_defaults="my_print_defaults"

fi

...


看到都指向了my.cnf,先去找/etc/my.cnf,如果找不到,再找$basedir/my.cnf,为什么我init db的时候defaults-file设置无效呢?

12 copy config file to basedir directory
我尝试做了操作,把/etc/my56m1.cnf copy到$basedir/my.cnf

[root@472322 data56m1]# cp /etc/my56m1.cnf /usr/local/mysql56m1/my.cnf

[root@472322 data56m1]#

[root@472322 data56m1]# service mysqld56m1 start

Starting MySQL. SUCCESS! 


Ok成功了。

13 check the error log
[root@472322 data56m1]# ll

total 1160480

-rw-r----- 1 mysql root        5037 Sep 12 03:07 472322.com.err

-rw-rw---- 1 mysql mysql          6 Sep 12 03:21 472322.com.pid

-rw-rw---- 1 mysql mysql         56 Sep 12 02:58 auto.cnf

-rw-rw---- 1 mysql mysql      12417 Sep 12 03:21 error.err

-rw-rw---- 1 mysql mysql 1073741824 Sep 12 03:22 ibdata01

-rw-rw---- 1 mysql mysql   12582912 Sep 12 03:07 ibdata1

-rw-rw---- 1 mysql mysql   50331648 Sep 12 03:22 ib_logfile0

-rw-rw---- 1 mysql mysql   50331648 Sep 12 03:02 ib_logfile1

drwx------ 2 mysql mysql       4096 Sep 12 02:56 mysql

srwxrwxrwx 1 mysql mysql          0 Sep 12 03:21 mysql3308.sock

-rw-rw---- 1 mysql mysql      67100 Sep 12 02:56 mysql-bin.000001

-rw-rw---- 1 mysql mysql    1211196 Sep 12 02:56 mysql-bin.000002

-rw-rw---- 1 mysql mysql        143 Sep 12 03:02 mysql-bin.000003

-rw-rw---- 1 mysql mysql        120 Sep 12 03:21 mysql-bin.000004

-rw-rw---- 1 mysql mysql        108 Sep 12 03:21 mysql-bin.log.index

drwx------ 2 mysql mysql       4096 Sep 12 02:56 performance_schema

drwx------ 2 mysql mysql       4096 Sep 12 02:56 test

[root@472322 data56m1]# 


OK,看到error.err生成了,起效果了!

14 check login
[root@472322 data56m1]# mysql -P3308 -s /data56m1/mysql3308.sock
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
[root@472322 data56m1]# mysql -P3308 -S /data56m1/mysql3308.sock
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 1
Server version: 5.6.13-log Source distribution
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mysql              |
| performance_schema |
| test               |
+--------------------+
4 rows in set (0.00 sec)

mysql> select @@port;
+--------+
| @@port |
+--------+
|   3308 |
+--------+
1 row in set (0.00 sec)
mysql>

疑问所在: 为什么我init db的时候--defaults-file=/etc/my56m1.cnf设置无效呢?

上一篇:CentOS7系列--3.1CentOS7中配置NFS服务


下一篇:Nginx配置实例-反向代理实例:根据访问的路径跳转到不同端口的服务中