题目要
部分代码
Please press enter to start cmd line!
##
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r5
[r5]interf
[r5]interface l
[r5]interface LoopBack 0
[r5-LoopBack0]ip add 192.168.1.161 27
[r5-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>
<r5>sys
Enter system view, return user view with Ctrl+Z.
[r5]interf
[r5]interface g
[r5]interface GigabitEthernet 0/0/1
[r5-GigabitEthernet0/0/1]ip add 192.168.1.18 30
Jul 8 2021 20:40:38-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r5-GigabitEthernet0/0/1]q
[r5]interf
[r5]interface g
[r5]interface GigabitEthernet 0/0/2
[r5-GigabitEthernet0/0/2]ip add 192.168.1.22 30
Jul 8 2021 20:40:55-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r5-GigabitEthernet0/0/2]q
[r5]interf
[r5]interface g
[r5]interface GigabitEthernet 0/0/0
[r5-GigabitEthernet0/0/0]ip add 56.1.1.1 24
[r5-GigabitEthernet0/0/0]
Jul 8 2021 20:41:50-08:00 r5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r5-GigabitEthernet0/0/0]q
[r5]sa
^
Error: Unrecognized command found at '^' position.
[r5]q
<r5>sa
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<r5>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>
<r5>sys
Enter system view, return user view with Ctrl+Z.
[r5]ip rou
[r5]ip route-s
[r5]ip route-static 0.0.0.0 0 56.1.1.2
[r5]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>
<r5>sys
Enter system view, return user view with Ctrl+Z.
[r5]ip rou
[r5]ip route-s
[r5]ip route-static 192.168.1.0 30 192.168.1.17
[r5]ip route-static 192.168.4.0 30 192.168.1.17
[r5]ip route-static 192.168.8.0 30 192.168.1.17
[r5]ip route-static 192.168.12.0 30 192.168.1.17
[r5]ip route-static 192.168.12.0 30 192.168.1.17
Error: The route already exists.
[r5]ip rou
[r5]ip route-s
[r5]ip route-static 192.168.1.32 27 192.168.1.17
[r5]ip route-static 192.168.1.64 27 192.168.1.17
[r5]ip route-static 192.168.1.96 27 192.168.1.17
[r5]ip route-static 192.168.1.128 27 192.168.1.17
[r5]ip rou
[r5]ip route-s
[r5]ip route-static 192.168.1.0 192.168.1.21
^
Error:Incomplete command found at '^' position.
[r5]ip route-static 192.168.1.0 192.168.1.22
^
Error:Incomplete command found at '^' position.
[r5]ip route-static 192.168.1.0 30 192.168.1.21
[r5]ip route-static 192.168.4.0 30 192.168.1.21
[r5]ip route-static 192.168.8.0 30 192.168.1.21
[r5]ip route-static 192.168.12.0 30 192.168.1.21
[r5]ip route-static 192.168.12.0 30 192.168.1.21
Error: The route already exists.
[r5]ip rou
[r5]ip route-s
[r5]ip route-static 192.168.1.64 27 192.168.1.21
[r5]ip route-static 192.168.1.32 27 192.168.1.21
[r5]ip route-static 192.168.1.96 27 192.168.1.21
[r5]ip route-static 192.168.1.128 27 192.168.1.21
[r5]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>sys
Enter system view, return user view with Ctrl+Z.
[r5]interf
[r5]interface g
[r5]interface GigabitEthernet 0/0/2
[r5-GigabitEthernet0/0/2]dsiap
[r5-GigabitEthernet0/0/2]disp
[r5-GigabitEthernet0/0/2]display thi
[r5-GigabitEthernet0/0/2]display this
[V200R003C00]
#
interface GigabitEthernet0/0/2
ip address 192.168.1.22 255.255.255.252
#
return
[r5-GigabitEthernet0/0/2]q
[r5]acl 2000
[r5-acl-basic-2000]ru
[r5-acl-basic-2000]rule per
[r5-acl-basic-2000]rule permit so
[r5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[r5-acl-basic-2000]q
[r5]interf
[r5]interface g
[r5]interface GigabitEthernet 0/0/0
[r5-GigabitEthernet0/0/0]nat ou
[r5-GigabitEthernet0/0/0]nat outbound 2000
[r5-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname a3
[a3]interf
[a3]interface g
[a3]interface GigabitEthernet 0/0/2
[a3-GigabitEthernet0/0/2]ip add 192.168.97 27
^
Error: Wrong parameter found at '^' position.
[a3-GigabitEthernet0/0/2]ip add 192.168.1.97 27
Jul 8 2021 20:30:07-08:00 a3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[a3-GigabitEthernet0/0/2]q
[a3]dhcp en
[a3]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[a3]ip p
[a3]ip pool
[a3]ip pool a
Info: It's successful to create an IP address pool.
[a3-ip-pool-a]netw
[a3-ip-pool-a]network 192.168.1.97 mas
[a3-ip-pool-a]network 192.168.1.96 mask 27
[a3-ip-pool-a]gat
[a3-ip-pool-a]gateway-list 192.168.1.97
[a3-ip-pool-a]dns
[a3-ip-pool-a]dns-list 114.114.114.114
[a3-ip-pool-a]q
[a3]interf
[a3]interface g
[a3]interface GigabitEthernet 0/0/2
[a3-GigabitEthernet0/0/2]dhcp se
[a3-GigabitEthernet0/0/2]dhcp select g
[a3-GigabitEthernet0/0/2]dhcp select global
[a3-GigabitEthernet0/0/2]q
[a3]interf
[a3]interface g
[a3]interface GigabitEthernet 0/0/1
[a3-GigabitEthernet0/0/1]ip add 192.168.1.6 30
Jul 8 2021 20:38:02-08:00 a3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[a3-GigabitEthernet0/0/1]q
[a3]interf
[a3]interface g
[a3]interface GigabitEthernet 0/0/0
[a3-GigabitEthernet0/0/0]ip add 192.168.1.13 30
[a3-GigabitEthernet0/0/0]
Jul 8 2021 20:38:24-08:00 a3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[a3-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<a3>
<a3>sa
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<a3>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<a3>sys
Enter system view, return user view with Ctrl+Z.
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 0.0.0.0 0 192.168.1.14
[a3]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<a3>
<a3>syss
^
Error: Unrecognized command found at '^' position.
<a3>sys
Enter system view, return user view with Ctrl+Z.
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 192.168.1.32 27 192.168.1.6
Error: The next-hop address is invalid.
[a3]ip route-static 192.168.1.32 27 192.168.1.5
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 192.168.1.64 27 192.168.1.5
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 192.168.1.64 27 192.168.1.13
Error: The next-hop address is invalid.
[a3]ip route-static 192.168.1.64 27 192.168.1.14
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 192.168.1.0 30 192.168.1.5
[a3]ip rou
[a3]ip route-s
[a3]ip route-static 192.168.1.8 30 192.168.1.14
[a3]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
截图