Fedora 22中的DNF软件包管理工具

2023-01-05 21:23:44

Introduction

　　DNF is the The Fedora Project package manager that is able to query for information about packages, fetch packages from repositories, install and uninstall packages using automatic dependency resolution, and update an entire system to the latest available packages. DNF performs automatic dependency resolution on packages you are updating, installing or removing, and thus is able to automatically determine, fetch and install all available dependent packages. DNF can be configured with new, additional repositories, or package sources, and also provides many plug-ins which enhance and extend its capabilities. DNF is able to perform many of the same tasks that RPM can; additionally, many of the command line options are similar. DNF enables easy and simple package management on a single machine or on groups of them.

　　DNF provides secure package management by enabling GPG (Gnu Privacy Guard; also known as GnuPG) signature verification on GPG-signed packages to be turned on for all package repositories (package sources), or for individual repositories. When signature verification is enabled, DNF will refuse to install any packages not GPG-signed with the correct key for that repository. This means that you can trust that the RPM packages you download and install on your system are from a trusted source, such as The Fedora Project, and were not modified during transfer. See Section 3, “Configuring DNF and DNF Repositories” for details on enabling signature-checking with DNF, or RPM介绍 for information on working with and verifying GPG-signed RPM packages in general.

　　DNF also enables you to easily set up your own repositories of RPM packages for download and installation on other machines.

　　Learning DNF is a worthwhile investment because it is often the fastest way to perform system administration tasks, and it provides capabilities beyond those provided by the PackageKit graphical package management tools.

　　You must have superuser privileges in order to use the dnf command to install, update or remove packages on your system. All examples in this chapter assume that you have already obtained superuser privileges by using either the su or sudo command.

1. Checking For and Updating Packages

1.1. Checking For Updates

　　The quickest way to check for updates is to attempt to install any available updates by using the dnf upgrade command as follows:

~]# dnf upgrade
Last metadata expiration check performed 1:24:32 ago on Thu May 14 23:23:51 2015.
Dependencies resolved.
Nothing to do.
Complete!

　　Note that dnf upgrade installs only those updates that can be installed. If a package cannot be updated, because of dependency problems for example, it is skipped.

　　The dnf check-update command can be used see which installed packages on your system have new versions available, however it does not mean that they can be successfully installed. This command is therefore mostly useful in scripts and for checking for updated packages that were not installed after running dnf upgrade.

　　For example:

~]# dnf check-update
Using metadata from Mon Apr 20 16:34:10 2015 (2:42:10 hours old)

python.x86_64                     2.7.9-6.fc22          updates
python-cryptography.x86_64        0.8.2-1.fc22          updates
python-libs.x86_64                2.7.9-6.fc22          updates

　　The packages in the above output are listed as having updated versions. The line in the example output tells us:

python — the name of the package,
x86_64 — the CPU architecture the package was built for,
2.7.9 — the version of the updated package,
6.fc22 — the release of the updated package,
updates-testing — the repository in which the updated package is located.

1.2. Updating Packages

　　You can choose to update a single package, multiple packages, or all packages at once. If any dependencies of the package, or packages, you update have updates available themselves, then they are updated too.

　　To update a single package, run the following command as root:

dnf upgrade package_name

　　For example, to update the python package, type:

~]# dnf upgrade python
Using metadata from Mon Apr 20 16:38:16 2015 (2:42:14 hours old)
Dependencies resolved.
==================================================================
 Package       Arch       Version       Repository       Size
==================================================================
Upgrading:
 python        x86_64     2.7.9-6.fc22  updates           92 k
 python-libs   x86_64     2.7.9-6.fc22  updates          5.8 M

Transaction Summary
==================================================================
Upgrade  2 Packages

Total download size: 5.9 M
Is this ok [y/N]:

　　This output contains:

python.x86_64 — you can download and install new python package.
python-libs.x86_64 — DNF has resolved that the python-libs-2.7.9-6.fc22.x86_64 package is a required dependency of the python package.
DNF presents the update information and then prompts you as to whether you want it to perform the update; DNF runs interactively by default. If you already know which transactions DNF plans to perform, you can use the -y option to automatically answer yes to any questions DNF may ask (in which case it runs non-interactively). However, you should always examine which changes DNF plans to make to the system so that you can easily troubleshoot any problems that might arise.
If a transaction does go awry, you can view DNF's transaction history by using the dnf history command as described in Section 2.6, “Working with Transaction History”.

　　DNF always installs a new kernel in the same sense that RPM installs a new kernel when you use the command rpm -i kernel. Therefore, you do not need to worry about the distinction between installing and upgrading a kernel package when you use the dnf command: it will do the right thing, regardless of whether you are using the dnf upgrade or dnf install command.

　　When using RPM, on the other hand, it is important to use the rpm -i kernel command (which installs a new kernel) instead of rpm -u kernel (which replaces the current kernel). See RPM介绍 for more information on installing and updating kernels with RPM.

　　To update all packages and their dependencies, enter dnf upgrade without any arguments:

dnf upgrade

1.3. Preserving Configuration File Changes

　　You will inevitably make changes to the configuration files installed by packages as you use your Fedora system. RPM, which DNF uses to perform changes to the system, provides a mechanism for ensuring their integrity. See RPM介绍 for details on how to manage changes to configuration files across package upgrades.

2. Packages and Package Groups

2.1. Searching Packages

　　You can search all RPM package names and summaries by using the following command:

dnf search term…

　　Add the all to match against descriptions and URLs.

dnf search all term…

　　This command displays the list of matches for each term. For example, to list all packages that match “meld” or “kompare”, type:

~]# dnf search meld kompare
Loaded plugins: langpacks, presto, refresh-packagekit
============================== N/S Matched: meld ===============================
meld.noarch : Visual diff and merge tool
python-meld3.x86_64 : HTML/XML templating system for Python

============================= N/S Matched: kompare =============================
komparator.x86_64 : Kompare and merge two folders

　Name and summary matches only, use "search all" for everything.

2.2. Listing Packages

　　DNF list and related commands provide information about packages, package groups, and repositories.

　　All of DNF's list commands allow you to filter the results by appending one or more glob expressions as arguments. Glob expressions are normal strings of characters which contain one or more of the wildcard characters * (which expands to match any character multiple times) and ? (which expands to match any one character).

　　Be careful to escape the glob expressions when passing them as arguments to a dnf command, otherwise the Bash shell will interpret these expressions as pathname expansions, and potentially pass all files in the current directory that match the globs to DNF. To make sure the glob expressions are passed to DNF as intended, either:

escape the wildcard characters by preceding them with a backslash character; or,
double-quote or single-quote the entire glob expression.

　　DNF searches only package names when using glob expressions. To search for a version of a package, include a dash and part of the version number as follows:

~]# dnf search kernel*-4*
Last metadata expiration check performed 2:46:09 ago on Thu May 14 23:23:51 2015.
Installed Packages
kernel.x86_64                        4.0.0-1.fc22                     @System
kernel.x86_64                        4.0.2-300.fc22                   @System
kernel-core.x86_64                   4.0.0-1.fc22                     @System
kernel-core.x86_64                   4.0.2-300.fc22                   @System
[output truncated]

dnf list glob_expression…
　　Lists information on installed and available packages matching all glob expressions.

　　Example 1. Listing all ABRT addons and plug-ins using glob expressions

　　Packages with various ABRT addons and plug-ins either begin with “abrt-addon-”, or “abrt-plugin-”. To list these packages, type the following at a shell prompt:

~]# dnf list abrt-addon\* abrt-plugin\*
Last metadata expiration check performed 0:14:36 ago on Mon May 25 23:38:13 2015.
Installed Packages
abrt-addon-ccpp.x86_64                  2.5.1-2.fc22               @System
abrt-addon-coredump-helper.x86_64       2.5.1-2.fc22               @System
abrt-addon-kerneloops.x86_64            2.5.1-2.fc22               @System
abrt-addon-pstoreoops.x86_64            2.5.1-2.fc22               @System
abrt-addon-python.x86_64                2.5.1-2.fc22               @System
abrt-addon-python3.x86_64               2.5.1-2.fc22               @System
abrt-addon-vmcore.x86_64                2.5.1-2.fc22               @System
abrt-addon-xorg.x86_64                  2.5.1-2.fc22               @System
abrt-plugin-bodhi.x86_64                2.5.1-2.fc22               @System
Available Packages
abrt-addon-upload-watch.x86_64          2.5.1-2.fc22               fedora

dnf list all
　　Lists all installed and available packages.

　　Example 2. Listing all installed and available packages

~]# dnf list all
Last metadata expiration check performed 0:21:11 ago on Mon May 25 23:38:13 2015.
Installed Packages
NetworkManager.x86_64                   1:1.0.2-1.fc22             @System
NetworkManager-libnm.x86_64             1:1.0.2-1.fc22             @System
PackageKit.x86_64                       1.0.6-4.fc22               @System
PackageKit-glib.x86_64                  1.0.6-4.fc22               @System
aajohan-comfortaa-fonts.noarch          2.004-4.fc22               @System
abrt.x86_64                             2.5.1-2.fc22               @System
[output truncated]

dnf list installed
　　Lists all packages installed on your system. The rightmost column in the output lists the repository from which the package was retrieved.

　　Example 3. Listing installed packages using a double-quoted glob expression

　　To list all installed packages that begin with “krb” followed by exactly one character and a hyphen, type:

~]# dnf list installed "krb?-*"
Last metadata expiration check performed 0:34:45 ago on Mon May 25 23:38:13 2015.
Installed Packages
krb5-libs.x86_64                        1.13.1-3.fc22              @System
krb5-workstation.x86_64                 1.13.1-3.fc22              @System

dnf list available
　　Lists all available packages in all enabled repositories.

　　Example 4. Listing available packages using a single glob expression with escaped wildcard characters

　　To list all available packages with names that contain “gstreamer” and then “plugin”, run the following command:

~]# dnf list available gstreamer\*plugin\*
Last metadata expiration check performed 0:42:15 ago on Mon May 25 23:38:13 2015.
Available Packages
gstreamer-plugin-crystalhd.i686              3.10.0-8.fc22          fedora
gstreamer-plugin-crystalhd.x86_64            3.10.0-8.fc22          fedora
gstreamer-plugins-bad-free.i686              0.10.23-24.fc22        fedora
gstreamer-plugins-bad-free.x86_64            0.10.23-24.fc22        fedora
gstreamer-plugins-bad-free-devel.i686        0.10.23-24.fc22        fedora
gstreamer-plugins-bad-free-devel.x86_64      0.10.23-24.fc22        fedora
 [output truncated]

dnf group list
　　Lists all package groups.

　　Example 5. Listing all package groups

~]# dnf group list
Loaded plugins: langpacks, presto, refresh-packagekit
Setting up Group Process
Installed Groups:
   Administration Tools
   Design Suite
   Dial-up Networking Support
   Fonts
   GNOME Desktop Environment
[output truncated]

dnf repolist
　　Lists the repository ID, name, and number of packages it provides for each enabled repository.

　　Example 6. Listing enabled repositories

~]# dnf repolist
Last metadata expiration check performed 0:48:29 ago on Mon May 25 23:38:13 2015.
repo id                             repo name                           status
*fedora                             Fedora 22 - x86_64                  44,762
*updates                            Fedora 22 - x86_64 - Updates             0

dnf repository-packages repo_id list
　　Lists the packages from the specified repository.

　　Example 7. Listing packages from a single repository

~]# dnf repository-packages fedora list [option]
Last metadata expiration check performed 1:38:25 ago on Wed May 20 22:16:16 2015.
Installed Packages
PackageKit.x86_64                        1.0.6-3.fc22                    @System
PackageKit-glib.x86_64                   1.0.6-3.fc22                    @System
aajohan-comfortaa-fonts.noarch           2.004-4.fc22                    @System
[output truncated]

　　The default action is to list all packages available and installed from the repository specified. Add the available or installed option to list only those packages available or installed from the specified repository.

2.3. Displaying Package Information

　　To display information about one or more packages, use a command as follows:

dnf info package_name…

　　For example, to display information about the abrt package, type:

~]# dnf info abrt
Last metadata expiration check performed 5 days, 1:12:55 ago on Wed May 20 22:16:16 2015.
Installed Packages
Name        : abrt
Arch        : x86_64
Epoch       : 0
Version     : 2.5.1
Release     : 2.fc22
Size        : 2.1 M
Repo        : @System
From repo   : updates-testing
Summary     : Automatic bug detection and reporting tool
URL         : https://github.com/abrt/abrt/wiki/ABRT-Project
License     : GPLv2+
Description : abrt is a tool to help users to detect defects in applications and
            : to create a bug report with all information needed by maintainer to fix it.
            : It uses plugin system to extend its functionality.

　　The dnf info package_name command is similar to the rpm -q --info package_name command, but provides as additional information the name of the DNF repository the RPM package was installed from (look for the From repo: line in the output).

2.4. Installing Packages

　　DNF allows you to install both a single package and multiple packages, as well as a package group of your choice.

　　To install a single package and all of its non-installed dependencies, enter a command in the following form:

dnf install package_name

　　You can also install multiple packages simultaneously by appending their names as arguments:

dnf install package_name package_name…

　　If you are installing packages on a multilib system, such as an AMD64 or Intel64 machine, you can specify the architecture of the package, as long as it is available in an enabled repository, by appending .arch to the package name. For example, to install the sqlite2 package for i586, type:

~]# dnf install sqlite2.i586

　　You can use glob expressions to quickly install multiple similarly-named packages:

~]# dnf install audacious-plugins-\*

　　In addition to package names and glob expressions, you can also provide file names to dnf install. If you know the name of the binary you want to install, but not its package name, you can give dnf install the path name:

~]# dnf install /usr/sbin/named

　　DNF then searches through its package lists, finds the package which provides /usr/sbin/named, if any, and prompts you as to whether you want to install it.

　　If you know you want to install the package that contains the named binary, but you do not know in which /usr/bin or /usr/sbin directory is the file installed, use the dnf provides command with a glob expression:

~]# dnf provides "*bin/named"
Using metadata from Thu Apr 16 13:41:45 2015 (4:23:50 hours old)
bind-32:9.10.2-1.fc22.x86_64 : The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server
Repo        : @System

　　DNF provides "*/file_name" will find all the packages that contain file_name.

　　A package group is similar to a package: it is not useful by itself, but installing one pulls a group of dependent packages that serve a common purpose. A package group has a name and a groupid (GID). The dnf group list -v command lists the names of all package groups, and, next to each of them, their groupid in parentheses. The groupid is always the term in the last pair of parentheses, such as kde-desktop-environment in the following example:

~]# dnf -v group list kde\*
cachedir: /var/cache/dnf/x86_64/22
Loaded plugins: builddep, config-manager, copr, playground, debuginfo-install, download, generate_completion_cache, kickstart, needs-restarting, noroot, protected_packages, Query, reposync, langpacks
initialized Langpacks plugin
DNF version: 0.6.5
repo: using cache for: fedora
not found deltainfo for: Fedora 22 - x86_64
not found updateinfo for: Fedora 22 - x86_64
repo: using cache for: updates-testing
repo: using cache for: updates
not found updateinfo for: Fedora 22 - x86_64 - Updates
Using metadata from Thu Apr 16 13:41:45 2015 (4:37:51 hours old)
Available environment groups:
   KDE Plasma Workspaces (kde-desktop-environment)

　　You can install a package group by passing its full group name (without the groupid part) to group install:

dnf group install group_name

　　Multi-word names must be quoted.

　　You can also install by groupid:

dnf group install groupid

　　You can even pass the groupid, or quoted name, to the install command if you prepend it with an @-symbol (which tells dnf that you want to perform a group install):

dnf install @group

　　For example, the following are alternative but equivalent ways of installing the KDE Plasma Workspaces group:

~]# dnf group install "KDE Plasma Workspaces"
~]# dnf group install kde-desktop-environment
~]# dnf install @kde-desktop-environment

2.5. Removing Packages

　　Similarly to package installation, DNF allows you to uninstall (remove in RPM and DNF terminology) both individual packages and a package group.

　　To uninstall a particular package, as well as any packages that depend on it, run the following command as root:

dnf remove package_name…

　　As when you install multiple packages, you can remove several at once by adding more package names to the command. For example, to remove totem, rhythmbox, and sound-juicer, type the following at a shell prompt:

~]# dnf remove totem rhythmbox sound-juicer

　　Similar to install, remove can take these arguments:

package names
glob expressions
file lists
package provides

　　DNF is not able to remove a package without also removing packages which depend on it. This type of operation can only be performed by RPM, is not advised, and can potentially leave your system in a non-functioning state or cause applications to misbehave and terminate unexpectedly. For further information, refer to RPM介绍.

　　You can remove a package group using syntax congruent with the install syntax:

dnf group remove group
dnf remove @group

　　The following are alternative but equivalent ways of removing the KDE Plasma Workspaces group:

~]# dnf group remove "KDE Plasma Workspaces"
~]# dnf group remove kde-desktop-environment
~]# dnf remove @kde-desktop-environment

2.6. Working with Transaction History

　　The dnf history command allows users to review information about a timeline of DNF transactions, the dates and times on when they occurred, the number of packages affected, whether transactions succeeded or were aborted, and if the RPM database was changed between transactions. Additionally, this command can be used to undo or redo certain transactions.

　　To display a list of all transactions, as root, either run dnf history with no additional arguments, or enter the following command:

dnf history list

　　To display only transactions in a given range, use the command in the following form:

dnf history list start_id..end_id

　　You can also list only transactions regarding a particular package or packages. To do so, use the command with a package name or a glob expression:

dnf history list glob_expression…

　　For example, the list of first five transactions may look as follows:

~]# dnf history list 1..4
Using metadata from Thu Apr 16 13:41:45 2015 (5:47:31 hours old)
ID     | Login user               | Date a | Action | Altere
-------------------------------------------------------------------------------
     4 | root <root>              | 2015-04-16 18:35 | Erase          |    1
     3 | root <root>              | 2015-04-16 18:34 | Install        |    1
     2 | root <root>              | 2015-04-16 17:53 | Install        |    1
     1 | System <unset>           | 2015-04-16 14:14 | Install        |  668 E

　　The dnf history list command produces tabular output with each row consisting of the following columns:

ID — an integer value that identifies a particular transaction.
Login user — the name of the user whose login session was used to initiate a transaction. This information is typically presented in the Full Name form, however sometimes the command used to perform the transaction is displayed. For transactions that were not issued by a user (such as an automatic system update), System is used instead.
Date and time — the date and time when a transaction was issued.
Action(s) — a list of actions that were performed during a transaction as described in Table 5.1, “Possible values of the Action(s) field”.
Altered — the number of packages that were affected by a transaction, possibly followed by additional information.

　　Table 1. Possible values of the Action(s) field

Action	Abbreviation	Description
Downgrade	D	At least one package has been downgraded to an older version.
Erase	E	At least one package has been removed.
Install	I	At least one new package has been installed.
Obsoleting	O	At least one package has been marked as obsolete.
Reinstall	R	At least one package has been reinstalled.
Update	U	At least one package has been updated to a newer version.

　　Apart from reviewing the transaction history, the dnf history command provides means to revert or repeat a selected transaction. To revert a transaction, type the following at a shell prompt as root:

dnf history undo id

　　To repeat a particular transaction, as root, run the following command:

dnf history redo id

　　Both commands also accept the last keyword to undo or repeat the latest transaction.

　　Note that both dnf history undo and dnf history redo commands merely revert or repeat the steps that were performed during a transaction, and will fail if the required packages are not available. For example, if the transaction installed a new package, the dnf history undo command will uninstall it and also attempt to downgrade all updated packages to their previous version, but the command will fail if the required packages are not available.

3. Configuring DNF and DNF Repositories

　　The configuration file for DNF and related utilities is located at /etc/dnf/dnf.conf. This file contains one mandatory [main] section, which allows you to set DNF options that have global effect, and may also contain one or more [repository] sections, which allow you to set repository-specific options. However, it is recommended to define individual repositories in new or existing .repo files in the /etc/yum.repos.d/directory. The values you define in the [main] section of the /etc/dnf/dnf.conf file may override values set in individual [repository] sections.

　　This section shows you how to:

set global DNF options by editing the [main] section of the /etc/dnf/dnf.conf configuration file;
set options for individual repositories by editing the [repository] sections in /etc/dnf/dnf.conf and .repo files in the /etc/yum.repos.d/ directory;
add, enable, and disable DNF repositories on the command line; and,
set up your own custom DNF repository.

3.1. Setting [main] Options

　　The /etc/dnf/dnf.conf configuration file contains exactly one [main] section, and while some of the key-value pairs in this section affect how dnf operates, others affect how DNF treats repositories. You can add many additional options under the [main] section heading in /etc/dnf/dnf.conf.

　　A sample /etc/dnf/dnf.conf configuration file can look like this:

[main]
gpgcheck=1
installonly_limit=3
clean_requirements_on_remove=true

　　The following are the most commonly-used options in the [main] section:

debuglevel=value
　　…where value is an integer between 0 and 10. Setting a higher debuglevel value causes dnf to display more detailed debugging output. debuglevel=0 disables debugging output, and debuglevel=2 is the default.

exclude=package_name [more_package_names]
　　This option allows you to exclude packages by keyword during installation/updates. Listing multiple packages for exclusion can be accomplished by quoting a space-delimited list of packages. Shell globs using wildcards (for example, * and ?) are allowed.

gpgcheck=value
　　…where value is one of:
　　0 — Disable GPG signature-checking on packages in all repositories, including local package installation.
　　1 — Enable GPG signature-checking on all packages in all repositories, including local package installation. gpgcheck=1 is the default, and thus all packages' signatures are checked.
　　If this option is set in the [main] section of the /etc/dnf/dnf.conf file, it sets the GPG-checking rule for all repositories. However, you can also set gpgcheck=value for individual repositories instead; you can enable GPG-checking on one repository while disabling it on another. Setting gpgcheck=value for an individual repository in its corresponding .repo file overrides the default if it is present in /etc/dnf/dnf.conf.
　　For more information on GPG signature-checking, refer to RPM介绍.

installonlypkgs=space separated list of packages
　　Here you can provide a space-separated list of packages which dnf can install, but will never update. See the dnf.conf(5) manual page for the list of packages which are install-only by default.
　　If you add the installonlypkgs directive to /etc/dnf/dnf.conf, you should ensure that you list all of the packages that should be install-only, including any of those listed under the installonlypkgs section of dnf.conf(5). In particular, kernel packages should always be listed in installonlypkgs (as they are by default), and installonly_limit should always be set to a value greater than 2 so that a backup kernel is always available in case the default one fails to boot.

installonly_limit=value
　　…where value is an integer representing the maximum number of versions that can be installed simultaneously for any single package listed in the installonlypkgs directive.
　　The defaults for the installonlypkgs directive include several different kernel packages, so be aware that changing the value of installonly_limit will also affect the maximum number of installed versions of any single kernel package. The default value listed in /etc/dnf/dnf.conf is installonly_limit=3, and it is not recommended to decrease this value, particularly below 2.

keepcache=value
　　…where value is one of:
　　0 — Do not retain the cache of headers and packages after a successful installation. This is the default.
　　1 — Retain the cache after a successful installation.

　　For a complete list of available [main] options, refer to the [MAIN] OPTIONS section of the dnf.conf(5) manual page.

3.2. Setting [repository] Options

　　The [repository] sections, where repository is a unique repository ID such as my_personal_repo (spaces are not permitted), allow you to define individual DNF repositories.

　　The following is a bare-minimum example of the form a [repository] section takes:

[repository]
name=repository_name
baseurl=repository_url

　　Every [repository] section must contain the following directives:

name=repository_name
　　…where repository_name is a human-readable string describing the repository.

parameter=repository_url
　　…where parameter is one of the following: baseurl, metalink, or mirrorlist;
　　…where repository_url is a URL to a directory containing a repodata directory of a repository, a metalink file, or a mirror list file.

If the repository is available over HTTP, use: http://path/to/repo
If the repository is available over FTP, use: ftp://path/to/repo
If the repository is local to the machine, use: file:///path/to/local/repo
If a specific online repository requires basic HTTP authentication, you can specify your user name and password by prepending it to the URL as username:password@link. For example, if a repository on http://www.example.com/repo/ requires a username of “user” and a password of “password”, then the baseurl link could be specified as http://user:password@www.example.com/repo/.

　　Usually this URL is an HTTP link, such as:

baseurl=http://path/to/repo/releases/$releasever/server/$basearch/os/

　　Note that DNF always expands the $releasever, $arch, and $basearch variables in URLs. For more information about DNF variables, refer to Section 3.3, “Using DNF Variables”.

　　To configure the default set of repositories, use the enabled option as follows:

enabled=value
　　…where value is one of:
　　0 — Do not include this repository as a package source when performing updates and installs.
　　1 — Include this repository as a package source.
　　Turning repositories on and off can also be performed by passing either the --set-enabled repo_name or --set-disabled repo_name option to the dnf command, or through the Add/Remove Software window of the PackageKit utility.

　　Many more [repository] options exist. For a complete list, refer to the [repository] OPTIONS section of the dnf.conf(5) manual page.

3.3. Using DNF Variables

　　You can use and reference the following built-in variables in dnf commands:

$releasever
　　You can use this variable to reference the release version of Fedora. DNF obtains the value of $releasever from the redhat-release package.

$arch
　　You can use this variable to refer to the system's CPU architecture. It is initialized with a value provided by the hawkey library. Valid values for $arch include: i586, i686 and x86_64.

$basearch
　　You can use $basearch to reference the base architecture of the system. For example, i686 and i586 machines both have a base architecture of i386, and AMD64 and Intel64 machines have a base architecture of x86_64.

4. Viewing the Current Configuration

　　To list all configuration options and their corresponding values, and the repositories, execute the dnf config-manager command with the --dump option:

~]$ dnf config-manager --dump
=============================== main ======================================
[main]
alwaysprompt = True
assumeno = False
assumeyes = False
bandwidth = 0
best = False
bugtracker_url = https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&component=dnf
cachedir = /var/cache/dnf/x86_64/22
[output truncated]

5. Adding, Enabling, and Disabling a DNF Repository

　　Section 3.2, “Setting [repository] Options” describes various options you can use to define a yum repository. This section explains how to add, enable, and disable a repository by using the dnf config-manager command.

　　To define a new repository, you can either add a [repository] section to the /etc/dnf/dnf.conf file, or to a .repo file in the /etc/yum.repos.d/ directory. All files with the .repo file extension in this directory are read by yum, and it is recommended to define your repositories here instead of in /etc/dnf/dnf.conf.

　　DNF repositories commonly provide their own .repo file. To add such a repository to your system and enable it, run the following command as root:

dnf config-manager --add-repo repository_url

　　…where repository_url is a link to the .repo file.

　　Example 8. Adding example.repo

　　To add a repository located at http://www.example.com/example.repo, type the following at a shell prompt:

~]# dnf config-manager --add-repo http://www.example.com/example.repo
adding repo from: http://www.example.com/example.repo

　　To enable a particular repository or repositories, type the following at a shell prompt as root:

dnf config-manager --set-enabled repository…

　　…where repository is the unique repository ID. To display the current configuration, add the --dump option.

　　To disable a yum repository, run the following command as root:

dnf config-manager --set-disabled repository…