圆产生测量点，不想测量的点可以从图形上删除测量点；

选取设置图标要设置为在几何元素上编辑/创建测量点，用鼠标在测量点上右键可以弹出删除图标；

$$*/
MODE/PROG,MAN
GOTO/0.0000, -0.0000, 20.0000
F(CIR1)=FEAT/CIRCLE,INNER,CART,0.0000,-0.0000,-3.0000,0.0000,0.0000,1.0000, 30.0000
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR1), 4
  GOTO/CART,     0.0000, -12.0000, 18.0000
  GOTO/CART,     0.0000, -12.0000, 17.0000
  GOTO/CART,    -4.5922, -11.0866, -3.0000
  PTMEAS/CART, -10.6066, -10.6066, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/CART,   -11.0866,  -4.5922, -3.0000
  GOTO/CART,   -11.0866,   4.5922, -3.0000
  PTMEAS/CART, -10.6066,  10.6066, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/CART,    -4.5922,  11.0866, -3.0000
  GOTO/CART,     4.5922,  11.0866, -3.0000
  PTMEAS/CART,  10.6066,  10.6066, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/CART,    11.0866,   4.5922, -3.0000
  GOTO/CART,    11.0866,  -4.5922, -3.0000
  PTMEAS/CART,  10.6066, -10.6066, -3.0000, -0.7071,  0.7071,  0.0000
  GOTO/CART,     8.4853,  -8.4853, 17.0000
ENDMES