通过BDC批量修改物料文档信息 MM02

*&---------------------------------------------------------------------*
*& Report  ZMM_03
*&
*&---------------------------------------------------------------------*
*&
*&
*&---------------------------------------------------------------------*

REPORT  ZMM_03 NO STANDARD PAGE HEADING
                       MESSAGE-ID ZMM.
TABLES:MARA.

DATA:BEGIN OF BDCDATA OCCURS 0.
    INCLUDE STRUCTURE BDCDATA.
DATA:END OF BDCDATA.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*DATA: GT_UP LIKE DRAW OCCURS 100 WITH HEADER LINE.
DATA:BEGIN OF GT_UP OCCURS 0.
    INCLUDE STRUCTURE DRAW.
DATA:OLD_DOKNR LIKE DRAW-DOKNR.
DATA:END OF GT_UP.
data: gt_temp like DRAD OCCURS 100 WITH HEADER LINE.
DATA: INPUT TYPE KCDE_INTERN_STRUC OCCURS 100 WITH HEADER LINE.
DATA gt_fieldcat TYPE lvc_t_fcat .
DATA:T_C(2) TYPE C,T_TEMP(20) TYPE C,T_SIGN(1) TYPE C.
DATA: L_MSTRING(480).
DATA: LS_DOKNR LIKE DRAD-DOKNR.
PARAMETERS:MATNR LIKE MARA-MATNR OBLIGATORY.
PARAMETERS:P_MODE TYPE C DEFAULT 'N' NO-DISPLAY.
PARAMETERS: P_LFILE LIKE RLGRAP-FILENAME OBLIGATORY.
PARAMETERS R_INSERT RADIOBUTTON GROUP CTU DEFAULT 'X'.
PARAMETERS R_UPDATE RADIOBUTTON GROUP CTU.
PARAMETERS R_DELETE RADIOBUTTON GROUP CTU.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_lfile.
 PERFORM GET_FILENAME USING P_LFILE
                       CHANGING P_LFILE.
 START-OF-SELECTION.
 T_SIGN = '3'.
 if p_lfile <> ''.
  PERFORM get_file.
 ENDIF.

IF GT_UP[] IS INITIAL.

ELSE.
****取记录
    PERFORM get_data.

PERform PROCESS_CC02.
    PERform PROCESS_CC03.
    PERform PROCESS_CC04.
    PERFORM PROCESS_CC06.
   IF R_INSERT = 'X'. "新增

T_C = LINES( GT_TEMP ).
      LOOP AT GT_UP.
       T_C = T_C + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = T_C
             IMPORTING
               OUTPUT = T_C.

perform bdc_dynpro      using 'SAPLMGMM' '4300'.
         perform bdc_field       using 'BDC_OKCODE'
                                       '/00'.
         CONCATENATE 'DRAW-DOKNR(' T_C ')' INTO T_TEMP.
         perform bdc_field       using 'BDC_CURSOR'
                                       T_TEMP.
         CONCATENATE 'DRAW-DOKAR(' T_C ')' INTO T_TEMP.
         perform bdc_field       using T_TEMP
                                        GT_UP-DOKAR.
         CONCATENATE 'DRAW-DOKNR(' T_C ')' INTO T_TEMP.
         perform bdc_field       using T_TEMP
                                        GT_UP-DOKNR.
         CONCATENATE 'DRAW-DOKTL(' T_C ')' INTO T_TEMP.
         perform bdc_field       using T_TEMP
                                        GT_UP-DOKTL.
         CONCATENATE 'DRAW-DOKVR(' T_C ')' INTO T_TEMP.
         perform bdc_field       using T_TEMP
                                        GT_UP-DOKVR.
         perform bdc_field       using 'GF_ALLE'
                                       'X'.
*       perform bdc_transaction using 'MM02'.
     ENDLOOP.
     perform bdc_dynpro      using 'SAPLMGMM' '4300'.
     perform bdc_field       using 'BDC_OKCODE'
                                   '=BU'.
     CONCATENATE 'DRAW-DOKVR(' T_C ')' INTO T_TEMP.
     perform bdc_field       using 'BDC_CURSOR'
                                   T_TEMP.
     perform bdc_field       using 'GF_ALLE'
                                   'X'.
  endif.
  IF R_DELETE = 'X'. "删除
      LOOP AT GT_UP.
        LS_DOKNR = GT_UP-DOKNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = LS_DOKNR
             IMPORTING
               OUTPUT = LS_DOKNR.
        LOOP AT GT_TEMP WHERE DOKNR = LS_DOKNR.
          T_C = sy-tabix.
        ENDLOOP.
      ENDLOOP.
*       T_C = T_C + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = T_C
             IMPORTING
               OUTPUT = T_C.
       perform bdc_dynpro      using 'SAPLMGMM' '4300'.
       perform bdc_field       using 'BDC_OKCODE'
                                      '=CV140_DELZ'.
       CONCATENATE 'DRAW-DOKAR(' T_C ')' INTO T_TEMP.
       perform bdc_field       using 'BDC_CURSOR'
                                      T_TEMP.
       perform bdc_field       using 'GF_ALLE'
                                      'X'.
      LOOP AT GT_UP.
        LS_DOKNR = GT_UP-DOKNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = LS_DOKNR
             IMPORTING
               OUTPUT = LS_DOKNR.
        LOOP AT GT_TEMP WHERE DOKNR = LS_DOKNR.
          T_C = sy-tabix.
        ENDLOOP.
*       T_C = T_C + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = T_C
             IMPORTING
               OUTPUT = T_C.
        CONCATENATE 'MARK(' T_C ')' INTO T_TEMP.
        perform bdc_field       using T_TEMP
                                      'X'.
*        perform bdc_dynpro      using 'SAPLSPO1' '0500'.
*        perform bdc_field       using 'BDC_OKCODE'
*                              '=OPT1'.
     ENDLOOP.
     perform bdc_dynpro      using 'SAPLMGMM' '4300'.
     perform bdc_field       using 'BDC_OKCODE'
                                   '=BU'.
     CONCATENATE 'DRAW-DOKVR(' T_C ')' INTO T_TEMP.
     perform bdc_field       using 'BDC_CURSOR'
                                   T_TEMP.
     perform bdc_field       using 'GF_ALLE'
                                   'X'.
  ENDIF.
  IF R_UPDATE = 'X'. "修改
      LOOP AT GT_UP.
        LS_DOKNR = GT_UP-OLD_DOKNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = LS_DOKNR
             IMPORTING
               OUTPUT = LS_DOKNR.
        LOOP AT GT_TEMP WHERE DOKNR = LS_DOKNR.
          T_C = sy-tabix.
        ENDLOOP.
      ENDLOOP.
*       T_C = T_C + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = T_C
             IMPORTING
               OUTPUT = T_C.
       perform bdc_dynpro      using 'SAPLMGMM' '4300'.
       perform bdc_field       using 'BDC_OKCODE'
                                      '=BU'.
       CONCATENATE 'DRAW-DOKNR(' T_C ')' INTO T_TEMP.
       perform bdc_field       using 'BDC_CURSOR'
                                      T_TEMP.
       perform bdc_field       using 'GF_ALLE'
                                      'X'.
      LOOP AT GT_UP.
        LS_DOKNR = GT_UP-OLD_DOKNR.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = LS_DOKNR
             IMPORTING
               OUTPUT = LS_DOKNR.
        LOOP AT GT_TEMP WHERE DOKNR = LS_DOKNR.
          T_C = sy-tabix.
        ENDLOOP.
*       T_C = T_C + 1.
       CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
             EXPORTING
               INPUT  = T_C
             IMPORTING
               OUTPUT = T_C.
        CONCATENATE 'DRAW-DOKNR(' T_C ')' INTO T_TEMP.
        perform bdc_field       using T_TEMP
                                      GT_UP-DOKNR.
*        perform bdc_dynpro      using 'SAPLSPO1' '0500'.
*        perform bdc_field       using 'BDC_OKCODE'
*                              '=OPT1'.
     ENDLOOP.
     LOOP AT GT_UP.
       perform bdc_dynpro      using 'SAPLSPO1' '0500'.
       perform bdc_field       using 'BDC_OKCODE'
                              '=OPT1'.
     ENDLOOP.
  ENDIF.
*    PERFORM PROCESS_CC07.
  REFRESH MESSTAB.
  CALL TRANSACTION 'MM02' USING BDCDATA MODE P_MODE UPDATE 'S' MESSAGES INTO MESSTAB.
  LOOP AT MESSTAB.
      MESSAGE ID     MESSTAB-MSGID
              TYPE   MESSTAB-MSGTYP
              NUMBER MESSTAB-MSGNR
              INTO L_MSTRING
              WITH MESSTAB-MSGV1
                   MESSTAB-MSGV2
                   MESSTAB-MSGV3
                   MESSTAB-MSGV4.
      IF MESSTAB-MSGTYP = 'E'.
          CONCATENATE MATNR '  ' L_MSTRING INTO L_MSTRING.
      ENDIF.
      WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
    ENDLOOP.
*  CALL TRANSACTION 'MM02' USING BDCDATA MODE P_MODE UPDATE 'S'.
 endif.
END-OF-SELECTION.

FORM GET_FILENAME   USING  P_PATH    LIKE RLGRAP-FILENAME
                        CHANGING P_FILE  LIKE RLGRAP-FILENAME.
  DATA:L_WRK_FILENAME LIKE RLGRAP-FILENAME,
       L_WRK_MASK     LIKE LGRWO-EXP_FILE.
* mask
  L_WRK_MASK = ',*.xls,*.xls.'.

* get file name
  CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      DEF_PATH         = P_FILE
      MASK             = L_WRK_MASK
      MODE             = 'O'
    IMPORTING
      FILENAME         = L_WRK_FILENAME
    EXCEPTIONS
      INV_WINSYS       = 01
      NO_BATCH         = 02
      SELECTION_CANCEL = 03
      SELECTION_ERROR  = 04
      OTHERS           = 05.

IF SY-SUBRC = 0.
    P_FILE = L_WRK_FILENAME.
  ELSE.
  ENDIF.
ENDFORM.                    " get_filename

FORM get_file.
  CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      FILENAME                = P_LFILE
      I_BEGIN_COL             = 1
      I_BEGIN_ROW             = 1
      I_END_COL               = 256
      I_END_ROW               = 65536
    TABLES
      INTERN                  = INPUT
    EXCEPTIONS
      INCONSISTENT_PARAMETERS = 1
      UPLOAD_OLE              = 2
      OTHERS                  = 3.
  IF SY-SUBRC <> 0.
    MESSAGE E000(zqm) WITH '文件路径有误!'.
  ENDIF.

LOOP AT INPUT.
  IF input-row = '0001'.
      CONTINUE.             "第一行是字段名,直接跳过
    ELSE.

CASE INPUT-COL.
          WHEN '0001'.
            GT_UP-DOKAR = INPUT-VALUE.
          WHEN '0002'.
            GT_UP-OLD_DOKNR = INPUT-VALUE.
          WHEN '0003'.
            GT_UP-DOKNR = INPUT-VALUE.
          WHEN '0004'.
            GT_UP-DOKTL = INPUT-VALUE.
          WHEN '0005'.
            GT_UP-DOKVR = INPUT-VALUE.

ENDCASE.

AT END OF ROW.
      APPEND GT_UP.
      CLEAR GT_UP.
    ENDAT.

ENDIF.

ENDLOOP.

*** 检测
  loop at gt_up.
    IF R_INSERT = 'X' OR R_DELETE = 'X'.
      IF GT_UP-OLD_DOKNR = GT_UP-DOKNR.

ELSE.
          WRITE: / '新增,删除,两列文档编号必须一致', SY-SUBRC.
          STOP.
       ENDIF.
    ELSE.
      IF GT_UP-OLD_DOKNR = GT_UP-DOKNR.
        WRITE: / '修改,两列文档编号必须不一致', SY-SUBRC.
          STOP.
       ELSE.

ENDIF.
    ENDIF.
  ENDLOOP.
ENDFORM.

form PROCESS_CC02.
  perform bdc_dynpro      using 'SAPLMGMM' '0060'.
  perform bdc_field       using 'BDC_CURSOR'
                                'RMMG1-MATNR'.
  perform bdc_field       using 'BDC_OKCODE'
                                'ENTR'.
  perform bdc_field       using 'RMMG1-MATNR'
                                matnr.
ENDform. "process_cc02

form PROCESS_CC03.
  perform bdc_dynpro      using 'SAPLMGMM' '0070'.
  perform bdc_field       using 'BDC_CURSOR'
                                'MSICHTAUSW-DYTXT(01)'.
  perform bdc_field       using 'BDC_OKCODE'
                                '=ENTR'.
  perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                                'X'.
ENDform. "process_cc03

form PROCESS_CC04.
  perform bdc_dynpro      using 'SAPLMGMM' '4004'.
  perform bdc_field       using 'BDC_OKCODE'
                                '=ZU01'.
  perform bdc_field       using 'BDC_CURSOR'
                                'MAKT-MAKTX'.
*  perform bdc_field       using 'MAKT-MAKTX'
*                                'X'.
*  perform bdc_field       using 'MARA-MEINS'
*                                'X'.
*  perform bdc_field       using 'MARA-MATKL'
*                                'X'.
*  perform bdc_field       using 'MARA-EXTWG'
*                                'X'.
*  perform bdc_field       using 'MARA-SPART'
*                                'X'.
*  perform bdc_field       using 'MARA-MTPOS_MARA'
*                                'X'.
*  perform bdc_field       using 'MARA-BRGEW'
*                                'X'.
*  perform bdc_field       using 'MARA-GEWEI'
*                                'X'.
*  perform bdc_field       using 'MARA-NTGEW'
*                                'X'.
*  perform bdc_field       using 'MARA-VOLUM'
*                                'X'.
*  perform bdc_field       using 'MARA-VOLEH'
*                                'X'.
ENDform. "process_cc04

form PROCESS_CC05.
  perform bdc_dynpro      using 'SAPLMGMM' '4300'.
  perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
  perform bdc_field       using 'BDC_CURSOR'
                                'DRAW-DOKNR(01)'.
  perform bdc_field       using 'DRAW-DOKAR(01)'
                                 GT_UP-DOKAR.
  perform bdc_field       using 'DRAW-DOKNR(01)'
                                 GT_UP-DOKNR.
  perform bdc_field       using 'DRAW-DOKTL(01)'
                                 GT_UP-DOKTL.
  perform bdc_field       using 'DRAW-DOKVR(01)'
                                 GT_UP-DOKVR.
  perform bdc_field       using 'GF_ALLE'
                                'X'.
ENDform. "process_cc05

FORM PROCESS_CC06.
  perform bdc_dynpro      using 'SAPLMGMM' '4300'.
  perform bdc_field       using 'BDC_OKCODE'
                                '=ZU04'.
  perform bdc_field       using 'BDC_CURSOR'
                                'SKTEXT-SPRAS(01)'.
ENDFORM.

FORM PROCESS_CC07.
  perform bdc_dynpro      using 'SAPLMGMM' '4300'.
  perform bdc_field       using 'BDC_OKCODE'
                                '=BU'.
  perform bdc_field       using 'BDC_CURSOR'
                                'DRAW-DOKNR(02)'.
  perform bdc_field       using 'GF_ALLE'
                                'X'.
ENDFORM.

form BDC_DYNPRO USING PROGRAM DYNPRO.
  CLEAR BDCDATA.
  BDCDATA-PROGRAM = PROGRAM.
  BDCDATA-DYNPRO = DYNPRO.
  BDCDATA-DYNBEGIN = 'X'.
  APPEND BDCDATA.
ENDform.

form BDC_FIELD USING FNAM FVAL.
  CLEAR BDCDATA.
  BDCDATA-FNAM = FNAM.
  BDCDATA-FVAL = FVAL.
  APPEND BDCDATA.
ENDform.
*&---------------------------------------------------------------------*
*&      Form  GET_DATA
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*  -->  p1        text
*  <--  p2        text
*----------------------------------------------------------------------*
FORM GET_DATA .
  select * into CORRESPONDING FIELDS OF TABLE gt_temp
  from DRAD
  where DOKOB = 'MARA' AND
        OBJKY = matnr.

SORT GT_TEMP BY DOKNR.
ENDFORM.                    " GET_DATA

对导入的EXCEL数据批量处理物料文档信息,包括新增,修改,删除

上一篇:Django forms 关于select和checkbox设置初始选中值及让前端选中指定值


下一篇:IIS下不能下载文件的docx文档,XLSX文档的设置方法(转)