Oracle 12c新特性--ASMFD（ASM Filter Driver）特性
从Oracle 12.1.0.2开始，可以使用asmfd来取代udev规则下的asm磁盘设备绑定，同时他也具有过滤非法IO操作的特性。ASMFD是ASMLIB和UDEV的替代产品，实际上，ASMFD也用到了UDEV。
可以在安装GRID时配置ASMFD，也可以在安装Grid后再进行配置。
检查操作系统版本是否支持ASMFD，可以使用如下代码：
acfsdriverstate -orahome $ORACLE_HOME supported
ASMFD 是 12.1 中就引入的新特性，它可以不用手动配置 ASM 磁盘，更重要的是它可以保护磁盘被其他非 Oracle 操作复写，例如 dd ， echo 等命令。
下面的环境基于RHEL 7.4,测试将UDEV存储转移到AFD磁盘路径。
一、afd配置调整
1、root用户下添加grid环境变量
[root@rac1 ~]# export ORACLE_HOME=/u01/app/12.2.0/grid
[root@rac1 ~]# export ORACLE_BASE=/tmp
2、获取当前asm磁盘组发现路径
[root@rac1 ~]# $ORACLE_HOME/bin/asmcmd dsget
parameter:/dev/asm*
profile:/dev/asm*
3、添加AFD发现路径
[root@rac1 ~]# asmcmd dsset '/dev/asm*','AFD:*'
[root@rac1 ~]# $ORACLE_HOME/bin/asmcmd dsget
parameter:/dev/asm*, AFD:*
profile:/dev/asm*,AFD:*
4、查看节点信息
[root@rac1 ~]# olsnodes -a
rac1 Hub
rac2 Hub
以下需要在所有节点运行
5、停止crs
[root@rac1 ~]# crsctl stop crs
1
6、安装oracle afd
节点1、节点2
加载以及配置AFD
[root@rac1 yum.repos.d]# asmcmd afd_configure
1
备注：在7.4以上的redhat或者centos下需要升级kmod才可以启用AFD，在前面一篇文章中已有介绍
解决在RHEL/CentOS7.4以上版本无法使用AFD(Oracle ASMFD)特性
https://blog.csdn.net/kiral07/article/details/87629679
加载afd过程：
AFD-627: AFD distribution files found.
AFD-634: Removing previous AFD installation.
AFD-635: Previous AFD components successfully removed.
AFD-636: Installing requested AFD software.
AFD-637: Loading installed AFD drivers.
AFD-9321: Creating udev for AFD.
AFD-9323: Creating module dependencies - this may take some time.
AFD-9154: Loading 'oracleafd.ko' driver.
AFD-649: Verifying AFD devices.
AFD-9156: Detecting control device '/dev/oracleafd/admin'.
AFD-638: AFD installation correctness verified.
Modifying resource dependencies - this may take some time.
查询afd状态信息
[root@rac1 yum.repos.d]# asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'rac1'
7、启动crs
[root@rac1 yum.repos.d]# crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
8、查看当前存储设备
[root@rac1 yum.repos.d]# ll /dev/mapper/mpath*
lrwxrwxrwx 1 root root 7 Feb 15 17:18 /dev/mapper/mpathc -> ../dm-1
lrwxrwxrwx 1 root root 7 Feb 15 17:18 /dev/mapper/mpathd -> ../dm-0
此处使用多路径设备mpathc、mpathd
[root@rac2 ~]# multipath -ll
mpathd (14f504e46494c45526147693538302d577037452d39596459) dm-1 OPNFILER,VIRTUAL-DISK
size=30G features='0' hwhandler='0' wp=rw
|-+- policy='service-time 0' prio=1 status=active
| `- 34:0:0:1 sdc 8:32 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 35:0:0:1 sde 8:64 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 36:0:0:1 sdg 8:96 active ready running
`-+- policy='service-time 0' prio=1 status=enabled
`- 37:0:0:1 sdi 8:128 active ready running
mpathc (14f504e46494c45524f444c7844412d717a557a2d6b7a6752) dm-0 OPNFILER,VIRTUAL-DISK
size=40G features='0' hwhandler='0' wp=rw
|-+- policy='service-time 0' prio=1 status=active
| `- 34:0:0:0 sdb 8:16 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 35:0:0:0 sdd 8:48 active ready running
|-+- policy='service-time 0' prio=1 status=enabled
| `- 36:0:0:0 sdf 8:80 active ready running
`-+- policy='service-time 0' prio=1 status=enabled
`- 37:0:0:0 sdh 8:112 active ready running
9、添加afd发现路径
切换到grid用户
[root@rac2 ~]# su - grid
使用afd_dsset添加存储路径
[grid@rac2:/home/grid]$asmcmd afd_dsset '/dev/mapper/mpath*'
[grid@rac2:/home/grid]$asmcmd afd_dsget
AFD discovery string: /dev/mapper/mpath*
此时未添加afd label所以为空
[grid@rac2:/home/grid]$asmcmd afd_lsdsk
There are no labelled devices.
至此从步骤5，在rac所有节点已运行所有命令
二、转移UDEV设备到AFD路径
1、查看当前ocr以及voting files磁盘组
[root@rac1 ~]# ocrcheck -config
Oracle Cluster Registry configuration is :
Device/File Name : +CRS
[root@rac1 ~]# crsctl query css votedisk
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 4e20265767f54f49bf12bd72f367217f (/dev/asm_crs) [CRS]
Located 1 voting disk(s).
2、查看crs磁盘组对应的udev存储路径
[root@rac1 ~]# su - grid
[grid@rac1:/home/grid]$asmcmd lsdsk -G crs
Path
/dev/asm_crs
3、停止rac集群
[root@rac1 ~]# crsctl stop cluster -all
1
4、转移udev设备到afd
使用label添加asmcrs磁盘组，将udev规则下的磁盘路径转移到afd
[grid@rac1:/home/grid]$asmcmd afd_label asmcrs /dev/mapper/mpathc --migrate
crs磁盘组已加载完毕
[grid@rac1:/home/grid]$asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS ENABLED /dev/mapper/mpathc
备注：由于当前磁盘组已被asm使用，必须使用migrate才可以进行转移。
添加另外一块data磁盘组
[grid@rac1:/home/grid]$asmcmd afd_label asmdata /dev/mapper/mpathd --migrate
查看afd磁盘组，已加载完毕
[grid@rac1:/home/grid]$asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS ENABLED /dev/mapper/mpathc
ASMDATA ENABLED /dev/mapper/mpathd
5、在其余节点扫描afd设备
[grid@rac2:/home/grid]$asmcmd afd_scan
[grid@rac2:/home/grid]$asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS ENABLED /dev/mapper/mpathc
ASMDATA ENABLED /dev/mapper/mpathd
6、启动rac集群
[root@rac1 ~]# crsctl start cluster -all
1
7、在asm实例下查询asm磁盘信息
原udev asm存储路径信息还能查看到
[root@rac1 ~]# asmcmd lsdsk
Path
AFD:ASMCRS
AFD:ASMDATA
SQL> col name for a10
SQL> col label for a10
SQL> col path for a15
SQL> select NAME,LABEL,PATH from V$ASM_DISK;
NAME LABEL PATH
---------- ---------- ---------------
ASMDATA /dev/asm_data ---->之前udev asm路径
ASMCRS /dev/asm_crs ---->之前udev asm路径
CRS_0000 ASMCRS AFD:ASMCRS
DATA_0000 ASMDATA AFD:ASMDATA
8、修改发现路径
[grid@rac1:/home/grid]$asmcmd dsget
parameter:/dev/asm*, AFD:*
profile:/dev/asm*,AFD:*
只保留afd路径
[grid@rac1:/home/grid]$asmcmd dsset 'AFD:*'
[grid@rac1:/home/grid]$asmcmd dsget
parameter:AFD:*
profile:AFD:*
再次查询udev路径下的设备已没有
SQL> select NAME,LABEL,PATH from V$ASM_DISK;
NAME LABEL PATH
---------- ---------- ---------------
CRS_0000 ASMCRS AFD:ASMCRS
DATA_0000 ASMDATA AFD:ASMDATA
9、移除UDEV规则文件
[root@rac1 ~]# ll -hrt /etc/udev/rules.d/
total 12K
-rw-r--r-- 1 root root 297 Nov 3 17:04 99-oracle-asmdevices.rules.old
-rw-r--r-- 1 root root 224 Feb 15 17:13 53-afd.rules
-rw-r--r-- 1 root root 957 Feb 18 08:55 70-persistent-ipoib.rules
99-oracle-asmdevices.rules重命名之后已无法发现磁盘
[root@rac1 ~]# ll /dev/asm*
ls: cannot access /dev/asm*: No such file or directory
使用afd特性的磁盘组未受影响
[grid@rac2:/home/grid]$asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS ENABLED /dev/mapper/mpathc
ASMDATA ENABLED /dev/mapper/mpathd
到此为止已完成afd的配置与加载
三、ASM磁盘组dd格式化测试
Oracle的afd特性可以过滤掉”非规范“的io操作，只要不是用于oracle的io操作都会被过滤掉，下面使用dd格式化asm整个磁盘组做测试
1、增加一个磁盘组”asmtest“用来做dd格式化实验
[root@rac1 ~]# asmcmd afd_label asmtest /dev/mapper/mpathe
[root@rac1 ~]# asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS ENABLED /dev/mapper/mpathc
ASMDATA ENABLED /dev/mapper/mpathd
ASMTEST ENABLED /dev/mapper/mpathe
[root@rac1 ~]# su - grid
[grid@rac1:/home/grid]$sqlplus / as sysasm
创建asmtest磁盘组
SQL> create diskgroup asmtest external redundancy disk 'AFD:asmtest';
Diskgroup created.
2、创建测试表空间asmtest以及测试表
SQL> create tablespace asmtest datafile '+asmtest' size 100m;
SQL> create table afd (id number) tablespace asmtest;
SQL> insert into afd values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from afd;
ID
----------
1
3、dd格式化
格式化整个磁盘组”asmtest“ —>/dev/mapper/mpathe
[root@rac1 ~]# dd if=/dev/zero of=/dev/mapper/mpathe
dd: writing to dev/mapper/mpathe No space left on device
2097153+0 records in
2097152+0 records out
1073741824 bytes (1.1 GB) copied, 70.6 s, 15.2 MB/s
4、再次做创建表空间操作
SQL> create tablespace asmtest2 datafile '+asmtest' size 100m;
SQL> create table afd2 (id number) tablespace asmtest2;
SQL> insert into afd2 values (2);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from afd;
ID
----------
2
SQL> ALTER system checkpoint;
System altered.
checkpoint之后也没有报错
5、禁用afd Filter
[root@rac1 ~]# asmcmd afd_filter -d
备注（-d是disable、-e是enable）
[root@rac1 ~]# asmcmd afd_lsdsk
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMCRS DISABLED /dev/mapper/mpathc
ASMDATA DISABLED /dev/mapper/mpathd
ASMTEST DISABLED /dev/mapper/mpathe
6、再次做dd格式化
[root@rac1 ~]# dd if=/dev/zero of=/dev/mapper/mpathe
dd: writing to dev/mapper/mpathe No space left on device
2097153+0 records in
2097152+0 records out
1073741824 bytes (1.1 GB) copied, 89.2804 s, 12.0 MB/s
7、在数据库中测试
SQL> insert into afd values (3);
1 row created.
SQL> commit;
Commit complete.
SQL> alter system checkpoint;
alter system checkpoint
*
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 21718
Session ID: 35 Serial number: 63358
数据库已崩溃
数据库重启之后已无法启动
[oracle@rac1:/home/oracle]$sqlplus / as sysdba
SQL*Plus: Release 12.2.0.1.0 Production on Mon Feb 18 14:55:41 2019
Copyright © 1982, 2016, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-39510: CRS error performing start on instance 'orcl1' on 'orcl'
CRS-2672: Attempting to start 'ora.AFDTEST.dg' on 'rac1'
CRS-2672: Attempting to start 'ora.AFDTEST.dg' on 'rac2'
CRS-2674: Start of 'ora.AFDTEST.dg' on 'rac1' failed
CRS-2674: Start of 'ora.AFDTEST.dg' on 'rac2' failed
CRS-0215: Could not start resource 'ora.orcl.db 1 1'.
clsr_start_resource:260 status:215
clsrapi_start_db:start_asmdbs status:215
四、拓展研究
在配置完afd之后，在dev路径下会有lable过后的磁盘
[root@rac1 ~]# ll /dev/oracleafd/disks/
total 8
-rwxrwx--- 1 grid oinstall 19 Feb 18 13:40 ASMCRS
-rwxrwx--- 1 grid oinstall 19 Feb 18 13:40 ASMDATA
查看此设备内容发现对应为多路径设备
[root@rac1 ~]# cat /dev/oracleafd/disks/ASMCRS
/dev/mapper/mpathc
[root@rac1 ~]# cat /dev/oracleafd/disks/ASMDATA
/dev/mapper/mpathd
udev规则下会有afd的规则文件
[grid@rac1:/home/grid]$ll -hrt /etc/udev/rules.d/
total 12K
-rw-r--r-- 1 root root 297 Nov 3 17:04 99-oracle-asmdevices.rules.old
-rw-r--r-- 1 root root 224 Feb 15 17:13 53-afd.rules
-rw-r--r-- 1 root root 957 Feb 18 08:55 70-persistent-ipoib.rules
[grid@rac1:/home/grid]$cat /etc/udev/rules.d/53-afd.rules
#
# AFD devices
KERNEL=="oracleafd/.*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/*", OWNER="grid", GROUP="asmadmin", MODE="0775"
KERNEL=="oracleafd/disks/*", OWNER="grid", GROUP="asmadmin", MODE="0664"
五、总结
Oracle的afd特性可以将”危险“IO操作进行重定向，具体原理不得而知，其本质还是通过系统内核使用udev规则加载磁盘设备。
Oracle 12C R2-新特性-自动配置ASMFD
1 说明
ASMFD 是 12.1 中就引入的新特性，它可以不用手动配置 ASM 磁盘，更重要的是它可以保护磁盘被其他非 Oracle 操作复写，例如 dd ， echo 等命令。
更为详尽的介绍，请查看官方文档：
--12.1 新特性 ASMFD
https://docs.oracle.com/database/121/OSTMG/GUID-2F5E344F-AFC2-4768-8C00-6F3C56302123.htm#OSTMG95729
在 12.2 中， ASMFD 被加强了，它可以自动配置磁盘，只需要执行一个命令，该磁盘就可以被 ASM 使用。
非常方便。
2 具体例子
2.1 创建目录
[root@rac1 software]# mkdir -p /u01/app/12.2.0/grid [root@rac1 software]# chown grid:oinstall /u01/app/12.2.0/grid
2.2 解压 GRID 软件
使用 grid 用户解压
[grid@rac1 software]# cd /u01/app/12.2.0/grid [grid@rac1 grid]# unzip -q /software/grid_home_image.zip
2.3 配置共享磁盘用于 ASMFD
2.3.1 使用 root 用户登录，并设置 ORACLE_HOME ， ORACLE_BASE
[root@rac1 grid]# su - root [root@rac1 grid]# export ORACLE_HOME=/u01/app/12.2.0/grid [root@rac1 grid]# export ORACLE_BASE=/tmp [root@rac1 grid]# echo $ORACLE_BASE /tmp [root@rac1 grid]# echo $ORACLE_HOME /u01/app/12.2.0/grid
2.3.2 使用 ASMCMD 命令来为 ASMFD 提供磁盘
如下，初始化三块磁盘，就不需要使用 udev ， ASMLIB 等方式来绑定磁盘并赋权限
[root@rac1 grid]# /u01/app/12.2.0/grid/bin/asmcmd afd_label DATA1 /dev/sdb --init [root@rac1 grid]#
2.3.3 验证磁盘是否被标记为 ASMFD 使用
[root@rac1 grid]# /u01/app/12.2.0/grid/bin/asmcmd afd_lslbl /dev/sdb -------------------------------------------------------------------------------- Label Duplicate Path ====================================DATA1 /dev/sdb
然后下面安装 GRID 的时候，就可以直接使用该磁盘了 /dev/sdb 。
注意 :/dev/sdb 重启后，可能会变名称，所以 Oracle 使用了 label 标签将其绑定
2.3.4 重置 ORACLE_BASE
unset ORACLE_BASE
2.4 开始安装 GRID
./gridSetup.sh
更多信息，请参考官方文档：
https://docs.oracle.com/en/database/oracle/oracle-database/12.2/tdprc/installing-oracle-grid.html#GUID-72D1994F-E838-415A-8E7D-30EA780D74A8
ASMFD (ASM Filter Driver) 支持的操作系统版本
ASMFD 12.1.0.2 Supported Platforms |
|---|
| Vendor | Version | Update/Kernel | Architecture | Bug or PSU |
|---|---|---|---|---|
| Oracle Linux – RedHat Compatible Kernel | 5 | Update 3 and later, 2.6.18 kernel series (RedHat Compatible Kernel) | X86_64 | 12.1.0.2.3 DB PSU Patch |
| Oracle Linux – Unbreakable Enterprise Kernel | 5 | Update 3 and later, 2.6.39-100 and later UEK 2.6.39 kernels | X86_64 |
12.1.0.2.3 DB PSU Patch (See Note 1) |
| Oracle Linux – RedHat Compatible Kernel | 6 | All Updates, 2.6.32-71 and later 2.6.32 RedHat Compatible kernels | X86_64 | 12.1.0.2.3 DB PSU Patch |
| Oracle Linux - Unbreakable Enterprise Kernel | 6 | All Updates, 2.6.39-100 and later UEK 2.6.39 kernels | X86_64 |
12.1.0.2.3 DB PSU Patch (See Note 1) |
| Oracle Linux - Unbreakable Enterprise Kernel | 6 | All Updates, 3.8.13-13 and later UEK 3.8.13 kernels | X86_64 | 12.1.0.2.3 DB PSU Patch (See Note 1) |
| Oracle Linux - Unbreakable Enterprise Kernel | 6 | All Updates, 4.1.12 and later UEK 4.1.12 kernels | X86_64 | 12.1.0.2.160719 (Base Bug 22810422 ) |
| Oracle Linux – RedHat Compatible Kernel | 7 |
Update 0, RedHat Compatible Kernel 3.10.0-123
|
X86_64 | 12.1.0.2.3 (Base Bug 18321597 ) |
| Oracle Linux – RedHat Compatible Kernel | 7 |
Update 1 and later, 3.10-0-229 and later RedHat Compatible kernels
|
X86_64 | 12.1.0.2.160119 (Base Bug 21233961 ) |
| Oracle Linux - Unbreakable Enterprise Kernel | 7 |
All Updates, 3.8.13-35 and later UEK 3.8.13 kernels
|
X86_64 |
12.1.0.2.3 (Base Bug 18321597 ) Base ( See Note 1 ) |
| Oracle Linux - Unbreakable Enterprise Kernel | 7 | All Updates, 4.1.12 and later UEK 4.1.12 kernels |
X86_64 | 12.1.0.2.160719 (Base Bug 22810422 ) |
| RedHat Linux | 5 | Update 3 and later, 2.6.18 kernel series | X86_64 | 12.1.0.2.3 DB PSU Patch |
| RedHat Linux | 6 | All Updates, 2.6.32-279 and later RedHat kernels | X86_64 | 12.1.0.2.3 DB PSU Patch |
| RedHat Linux | 7 | Update 0, 3.10.0-123 kernel |
X86_64 | 12.1.0.2.3 (Base Bug 18321597 ) |
| RedHat Linux | 7 | Update 1 and later, 3.10.0-229 and later RedHat kernels |
X86_64 | 12.1.0.2.160119 (Base Bug 21233961 ) |
| RedHat Linux | 7 | Update 4 |
X86_64 | 12.1.0.2.170718ACFSPSU + Patch 26247490 |
| Novell SLES | 11 | SP2 | X86_64 | Base |
| Novell SLES | 11 | SP3 | X86_64 | Base |
| Novell SLES | 11 | SP4 | X86_64 | 12.1.0.2.160419 (Base Bug 21231953 ) |
| Novell SLES | 12 | SP1 | X86_64 | 12.1.0.2.170117ACFSPSU(Base Bug 23321114 ) |
12c新特性ASMFD
时间: 2016-05-17 22:32:08 | 作者: ohsdba | English
如非注明，本站文章皆为原创。欢迎转载，转载时请注明出处和作者信息。
从12.1.0.2开始，Oracle 引入了ASMFD(ASM Filter Driver)，ASMFD只适应于Linux平台。安装完Grid Infrastructure后，你可以决定是否配置她。如果之前使用了ASMLIB(可以简单的理解为对设备做标签来标识磁盘)或者udev(可以动态管理设备)，迁移到ASMFD之后，需要卸载ASMLIB或禁用udev的规则。通过Filter driver可以过滤无效的请求，避免因为非oracle的I/O请求造成意外的覆写，进而保证了系统的安全和稳定。
官方文档中关于ASMFD的描述
This feature is available on Linux systems starting with Oracle Database 12c Release 1 (12.1.0.2).
Oracle ASM Filter Driver (Oracle ASMFD) is a kernel module that resides in the I/O path of the Oracle ASM disks.Oracle ASM uses the filter driver to validate write I/O requests to Oracle ASM disks. After installation of Oracle Grid Infrastructure, you can optionally configure Oracle ASMFD for your system. If ASMLIB is configured for an existing Oracle ASM installation, then you must explicitly migrate the existing ASMLIB configuration to Oracle ASMFD.
The Oracle ASMFD simplifies the configuration and management of disk devices by eliminating the need to rebind disk devices used with Oracle ASM each time the system is restarted.
The Oracle ASM Filter Driver rejects any I/O requests that are invalid. This action eliminates accidental overwrites of Oracle ASM disks that would cause corruption in the disks and files within the disk group. For example, the Oracle ASM Filter Driver filters out all non-Oracle I/Os which could cause accidental overwrites.
ASMFD会拒绝所有的无效的I/O请求。这种行为可以避免因为意外的覆写造成ASM Disk的损坏或磁盘组中文件的损坏。比如她会过滤出所有可能造成覆写的non-oracle的I/O请求。
本文以Oracle Restart(测试版本12.1.0.2.0)环境测试为例来说明如何安装配置ASMFD。首先安装GI(Install Softeware Only)，然后配置ASMFD，配置Label ASMFD Disks，创建ASM实例，创建ASM磁盘组(ASMFD)，创建spfile并迁移至ASM磁盘组。最后在启用和关闭Filter功能情况下分别测试。
详情参考：http://docs.oracle.com/database/121/OSTMG/GUID-06B3337C-07A3-4B3F-B6CD-04F2916C11F6.htm
配置Oracle Restart(SIHA)
[root@db1 ~]# /orgrid/oracle/product/121/root.sh
Performing root user operation.
The following environment variables are set as:
ORACLE_OWNER= orgrid
ORACLE_HOME= /orgrid/oracle/product/121
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
To configure Grid Infrastructure for a Stand-Alone Server run the following command as the root user:
/orgrid/oracle/product/121/perl/bin/perl -I/orgrid/oracle/product/121/perl/lib -I/orgrid/oracle/product/121/crs/install /orgrid/oracle/product/121/crs/install/roothas.pl 执行这个脚本配置HAS，可以不必在GUI下运行
To configure Grid Infrastructure for a Cluster execute the following command as orgrid user:
/orgrid/oracle/product/121/crs/config/config.sh
安装GI，选择只安装软件，如果要配置RAC，需要 运行config.sh脚本( 必须在GUI模式下运行 )，会让你输入cluster信息，scan信息，感兴趣的可以尝试下。
This command launches the Grid Infrastructure Configuration Wizard. The wizard also supports silent operation, and the parameters can be passed through the response file that is available in the installation media.
[root@db1 ~]#
[root@db1 ~]# /orgrid/oracle/product/121/perl/bin/perl -I/orgrid/oracle/product/121/perl/lib -I/orgrid/oracle/product/121/crs/install /orgrid/oracle/product/121/crs/install/roothas.pl
Using configuration parameter file: /orgrid/oracle/product/121/crs/install/crsconfig_params
LOCAL ADD MODE
Creating OCR keys for user 'orgrid', privgrp 'asmadmin'..
Operation successful.
LOCAL ONLY MODE
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4664: Node db1 successfully pinned.
2016/05/16 22:10:54 CLSRSC-330: Adding Clusterware entries to file 'oracle-ohasd.conf'
db1 2016/05/16 22:11:11 /orgrid/oracle/product/121/cdata/db1/backup_20160516_221111.olr 0
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'db1'
CRS-2673: Attempting to stop 'ora.evmd' on 'db1'
CRS-2677: Stop of 'ora.evmd' on 'db1' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'db1' has completed
CRS-4133: Oracle High Availability Services has been stopped.
CRS-4123: Oracle High Availability Services has been started.
2016/05/16 22:12:19 CLSRSC-327: Successfully configured Oracle Restart for a standalone server
用udev绑定，加载并查看
[root@db1 ~]# cd /etc/udev/rules.d/
[root@db1 rules.d]# cat 99-oracle-asmdevices.rules
KERNEL=="sdb1",NAME="asmdisk1",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdb2",NAME="asmdisk2",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdb3",NAME="asmdisk3",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdb4",NAME="asmdisk4",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdc1",NAME="asmdisk5",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdc2",NAME="asmdisk6",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdc3",NAME="asmdisk7",OWNER="orgrid",GROUP="asmadmin",MODE="0660" KERNEL=="sdc4",NAME="asmdisk8",OWNER="orgrid",GROUP="asmadmin",MODE="0660" [root@db1 rules.d]# [root@db1 rules.d]# udevadm control --reload-rules [root@db1 rules.d]# udevadm trigger [root@db1 rules.d]# ls -l /dev/asmdisk* brw-rw---- 1 orgrid asmadmin 8, 17 May 16 23:03 /dev/asmdisk1 brw-rw---- 1 orgrid asmadmin 8, 18 May 16 23:03 /dev/asmdisk2 brw-rw---- 1 orgrid asmadmin 8, 19 May 16 23:03 /dev/asmdisk3 brw-rw---- 1 orgrid asmadmin 8, 20 May 16 23:03 /dev/asmdisk4 brw-rw---- 1 orgrid asmadmin 8, 33 May 16 23:03 /dev/asmdisk5 brw-rw---- 1 orgrid asmadmin 8, 34 May 16 23:03 /dev/asmdisk6 brw-rw---- 1 orgrid asmadmin 8, 35 May 16 23:03 /dev/asmdisk7 brw-rw---- 1 orgrid asmadmin 8, 36 May 16 23:03 /dev/asmdisk8 [root@db1 rules.d]#
更多关于udev，请参考 http://www.ibm.com/developerworks/cn/linux/l-cn-udev/
查看ASMFD是否安装
[root@db1 ~]# export ORACLE_HOME=/orgrid/oracle/product/121
[root@db1 ~]# export ORACLE_SID=+ASM
[root@db1 ~]# export PATH=$ORACLE_HOME/bin:$PATH
[root@db1 ~]# $ORACLE_HOME/bin/asmcmd afd_state
Connected to an idle instance.
ASMCMD-9526: The AFD state is 'NOT INSTALLED' and filtering is 'DEFAULT' on host 'db1'
[root@db1 ~]#
安装ASMFD(必须先关掉CRS(RAC)/HAS(SIHA)服务)
[root@db1 ~]# $ORACLE_HOME/bin/asmcmd afd_configure Connected to an idle instance. ASMCMD-9523: command cannot be used when Oracle Clusterware stack is up [root@db1 ~]# crsctl stop has CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'db1' CRS-2673: Attempting to stop 'ora.evmd' on 'db1' CRS-2677: Stop of 'ora.evmd' on 'db1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'db1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@db1 ~]# $ORACLE_HOME/bin/asmcmd afd_configure Connected to an idle instance. AFD-627: AFD distribution files found. AFD-636: Installing requested AFD software. AFD-637: Loading installed AFD drivers. AFD-9321: Creating udev for AFD. AFD-9323: Creating module dependencies - this may take some time. AFD-9154: Loading 'oracleafd.ko' driver. AFD-649: Verifying AFD devices. AFD-9156: Detecting control device '/dev/oracleafd/admin'. AFD-638: AFD installation correctness verified. Modifying resource dependencies - this may take some time. [root@db1 ~]#
查看ASMFD详情
[orgrid@db1 ~]$ $ORACLE_HOME/bin/asmcmd afd_state
Connected to an idle instance.
ASMCMD-9526: The AFD state is ' LOADED ' and filtering is 'DEFAULT' on host 'db1'
[root@db1 ~]# /orgrid/oracle/product/121/bin/crsctl start has CRS-4123: Oracle High Availability Services has been started. [root@db1 ~]# [orgrid@db1 ~]$ [orgrid@db1 bin]$ pwd /orgrid/oracle/product/121/bin [orgrid@db1 bin]$ ls -ltr afd* -rwxr-x--- 1 orgrid asmadmin 1000 May 23 2014 afdroot -rwxr-xr-x 1 orgrid asmadmin 72836515 Jul 1 2014 afdboot -rwxr-xr-x 1 orgrid asmadmin 184403 Jul 1 2014 afdtool.bin -rwxr-x--- 1 orgrid asmadmin 766 May 16 23:29 afdload -rwxr-x--- 1 orgrid asmadmin 1254 May 16 23:29 afddriverstate -rwxr-xr-x 1 orgrid asmadmin 2829 May 16 23:29 afdtool
[root@db1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- Name Target State Server State details -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.ons OFFLINE OFFLINE db1 STABLE -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.cssd 1 OFFLINE OFFLINE STABLE ora.diskmon 1 OFFLINE OFFLINE STABLE ora.driver.afd 1 ONLINE ONLINE db1 STABLE ora.evmd 1 ONLINE ONLINE db1 STABLE -------------------------------------------------------------------------------- [root@db1 ~]#
安装成功后，你看到afd的一些文件，还能看到资源ora.driver.afd
用afd_label标识磁盘
[orgrid@db1 bin]$ $ORACLE_HOME/bin/asmcmd afd_label ASMDISK1 /dev/asmdisk1
Connected to an idle instance. [orgrid@db1 bin]$ $ORACLE_HOME/bin/asmcmd afd_lsdsk Connected to an idle instance. -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 ENABLED /dev/asmdisk1 [orgrid@db1 bin]$ $ORACLE_HOME/bin/asmcmd afd_label ASMDISK2 /dev/asmdisk2 Connected to an idle instance. [orgrid@db1 bin]$ $ORACLE_HOME/bin/asmcmd afd_lsdsk Connected to an idle instance. -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 ENABLED /dev/asmdisk1 ASMDISK2 ENABLED /dev/asmdisk2 [orgrid@db1 bin]$ asmcmd Connected to an idle instance. ASMCMD> afd_label ASMDISK3 /dev/asmdisk3 ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 ENABLED /dev/asmdisk1 ASMDISK2 ENABLED /dev/asmdisk2 ASMDISK3 ENABLED /dev/asmdisk3 ASMCMD>
[root@db1 rules.d]# ls -ltr|tail -5 -rw-r--r--. 1 root root 789 Mar 10 05:18 70-persistent-cd.rules -rw-r--r--. 1 root root 341 Mar 10 05:25 99-vmware-scsi-udev.rules -rw-r--r-- 1 root root 190 May 16 22:11 55-usm.rules -rw-r--r-- 1 root root 600 May 16 23:03 99-oracle-asmdevices.rules -rw-r--r-- 1 root root 230 May 17 00:31 53-afd.rules [root@db1 rules.d]# [orgrid@db1 rules.d]$ pwd /etc/udev/rules.d [root@db1 rules.d]# cat 53-afd.rules # # AFD devices KERNEL=="oracleafd/.*", OWNER="orgrid", GROUP="asmadmin", MODE="0770" KERNEL=="oracleafd/*", OWNER="orgrid", GROUP="asmadmin", MODE="0770" KERNEL=="oracleafd/disks/*", OWNER="orgrid", GROUP="asmadmin", MODE="0660" [root@db1 rules.d]# cat 55-usm.rules # # ADVM devices KERNEL=="asm/*", GROUP="asmadmin", MODE="0770" KERNEL=="asm/.*", GROUP="asmadmin", MODE="0770" # # ACFS devices KERNEL=="ofsctl", GROUP="asmadmin", MODE="0664" [root@db1 rules.d]#
安装后会看到udev rules下面多了一些文件，实际上ASMFD仍使用了udev
创建ASM实例(也可以通过asmca去创建)
[orgrid@db1 dbs]$ srvctl add asm [orgrid@db1 dbs]$ ps -ef|grep pmon orgrid 42414 36911 0 14:26 pts/2 00:00:00 grep pmon [orgrid@db1 dbs]$ crsctl stat res -t -------------------------------------------------------------------------------- Name Target State Server State details -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.asm OFFLINE OFFLINE db1 STABLE ora.ons OFFLINE OFFLINE db1 STABLE -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.cssd 1 OFFLINE OFFLINE STABLE ora.diskmon 1 OFFLINE OFFLINE STABLE ora.driver.afd 1 ONLINE ONLINE db1 STABLE ora.evmd 1 ONLINE ONLINE db1 STABLE -------------------------------------------------------------------------------- [orgrid@db1 dbs]$ [orgrid@db1 ~]$ cat $ORACLE_HOME/dbs/init*.ora *.asm_power_limit=1 *.diagnostic_dest='/orgrid/grid_base' *.instance_type='asm' *.large_pool_size=12M *.memory_target=1024M *.remote_login_passwordfile='EXCLUSIVE' [orgrid@db1 ~]$ [orgrid@db1 ~]$ ps -ef|grep pmon orgrid 42724 42694 0 14:30 pts/2 00:00:00 grep pmon [orgrid@db1 ~]$ srvctl start asm [orgrid@db1 ~]$ ps -ef|grep pmon orgrid 42807 1 0 14:30 ? 00:00:00 asm_pmon_+ASM orgrid 42888 42694 0 14:31 pts/2 00:00:00 grep pmon [orgrid@db1 ~]$ crsctl stat res -t -------------------------------------------------------------------------------- Name Target State Server State details -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.asm ONLINE ONLINE db1 Started,STABLE ora.ons OFFLINE OFFLINE db1 STABLE -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.cssd 1 ONLINE ONLINE db1 STABLE ora.diskmon 1 OFFLINE OFFLINE STABLE ora.driver.afd 1 ONLINE ONLINE db1 STABLE ora.evmd 1 ONLINE ONLINE db1 STABLE -------------------------------------------------------------------------------- [orgrid@db1 ~]$
通过asmca创建DiskGroup
[orgrid@db1 ~]$ asmca -silent -sysAsmPassword oracle -asmsnmpPassword oracle -createDiskGroup -diskString 'AFD:*' -diskGroupName DATA_AFD -disk 'AFD:ASMDISK1' -disk 'AFD:ASMDISK2' -redundancy Normal -au_size 4 -compatible.asm 12.1 -compatible.rdbms 12.1
Disk Group DATA_AFD created successfully.
[orgrid@db1 ~]$
创建spfile并迁移到磁盘组
[orgrid@db1 ~]$ asmcmd spget [orgrid@db1 ~]$ [orgrid@db1 ~]$ sqlplus / as sysdba SQL*Plus: Release 12.1.0.2.0 Production on Tue May 17 15:09:26 2016 Copyright (c) 1982, 2014, Oracle. All rights reserved. Connected to: Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production With the Automatic Storage Management option SQL> show parameter spf NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string SQL> create spfile='+DATA_AFD' from pfile; File created. SQL> show parameter spf NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string SQL> exit Disconnected from Oracle Database 12c Enterprise Edition Release 12.1.0.2.0 - 64bit Production With the Automatic Storage Management option [orgrid@db1 ~]$ asmcmd spget +DATA_AFD/ASM/ASMPARAMETERFILE/registry.253.912092995 [orgrid@db1 ~]$
备份并移除udev rule文件99-oracle-asmdevices.rules
重命名99-oracle-asmdevices.rules为99-oracle-asmdevices.rules.bak。如果不move 99-oracle-asmdevices.rules文件，下次重启之后，之前ASMFD标识过的磁盘，看不到。
[orgrid@db1 ~]$ asmcmd afd_lsdsk There are no labelled devices. [root@db1 ~]# ls -l /dev/oracleafd/disks total 0 [root@db1 ~]# ls -l /dev/oracleafd/ admin disks/
设置磁盘Discovery String字符串
ASMCMD> afd_dsget AFD discovery string: ASMCMD> afd_dsset '/dev/sd*' --设置ASMFD discovery string为原来物理磁盘的信息 ASMCMD> afd_dsget AFD discovery string: '/dev/sd*' ASMCMD> [orgrid@db1 ~]$ asmcmd afd_dsget AFD discovery string: '/dev/sd*' [orgrid@db1 ~]$ asmcmd dsget --设置ASM磁盘组iscovery string为AFD:* parameter:AFD:* profile:AFD:* [orgrid@db1 ~]$
重启服务器并验证
[root@db1 ~]# ls -l /dev/oracleafd/disks/ total 12 -rw-r--r-- 1 root root 10 May 17 00:15 ASMDISK1 -rw-r--r-- 1 root root 10 May 17 00:15 ASMDISK2 -rw-r--r-- 1 root root 10 May 17 00:15 ASMDISK3 [root@db1 ~]# ASMCMD> lsdsk --candidate Path AFD:ASMDISK2 AFD:ASMDISK3 ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 DISABLED /dev/sdb1 ASMDISK2 DISABLED /dev/sdb2 ASMDISK3 DISABLED /dev/sdb3 ASMCMD> [orgrid@db1 ~]$ ls -l /dev/disk/by-label/ total 0 lrwxrwxrwx 1 root root 10 May 17 00:30 ASMDISK1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 May 17 00:30 ASMDISK2 -> ../../sdb2 lrwxrwxrwx 1 root root 10 May 17 00:31 ASMDISK3 -> ../../sdb3 [orgrid@db1 ~]$
重启后会发现，ASMFD用的磁盘的属性变成了root权限
启用Filter功能
ASMCMD> help afd_filter afd_filter Sets the AFD filtering mode on a given disk path. If the command is executed without specifying a disk path then filtering is set at node level. ASMCMD> ASMCMD> afd_filter -e /dev/sdb2 ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 DISABLED /dev/sdb1 ASMDISK2 DISABLED /dev/sdb2 ASMDISK3 DISABLED /dev/sdb3 ASMCMD> afd_filter -e ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 ENABLED /dev/sdb1 ASMDISK2 ENABLED /dev/sdb2 ASMDISK3 ENABLED /dev/sdb3 ASMCMD>
创建新磁盘组DATA_PGOLD
SQL> create diskgroup DATA_PGOLD external redundancy disk 'AFD:ASMDISK3';
Diskgroup created.
SQL>
[orgrid@db1 ~]$ kfed read AFD:ASMDISK3
kfbh.endian: 1 ; 0x000: 0x01 kfbh.hard: 130 ; 0x001: 0x82 kfbh.type: 1 ; 0x002: KFBTYP_DISKHEAD kfbh.datfmt: 1 ; 0x003: 0x01 kfbh.block.blk: 0 ; 0x004: blk=0 kfbh.block.obj: 2147483648 ; 0x008: disk=0 kfbh.check: 771071217 ; 0x00c: 0x2df59cf1 kfbh.fcn.base: 0 ; 0x010: 0x00000000 kfbh.fcn.wrap: 0 ; 0x014: 0x00000000 kfbh.spare1: 0 ; 0x018: 0x00000000 kfbh.spare2: 0 ; 0x01c: 0x00000000 kfdhdb.driver.provstr: ORCLDISKASMDISK3 ; 0x000: length=16 kfdhdb.driver.reserved[0]: 1145918273 ; 0x008: 0x444d5341 kfdhdb.driver.reserved[1]: 843797321 ; 0x00c: 0x324b5349 kfdhdb.driver.reserved[2]: 0 ; 0x010: 0x00000000 kfdhdb.driver.reserved[3]: 0 ; 0x014: 0x00000000 kfdhdb.driver.reserved[4]: 0 ; 0x018: 0x00000000 kfdhdb.driver.reserved[5]: 0 ; 0x01c: 0x00000000 kfdhdb.compat: 168820736 ; 0x020: 0x0a100000 kfdhdb.dsknum: 0 ; 0x024: 0x0000 kfdhdb.grptyp: 1 ; 0x026: KFDGTP_EXTERNAL kfdhdb.hdrsts: 3 ; 0x027: KFDHDR_MEMBER kfdhdb.dskname: ASMDISK3 ; 0x028: length=8 kfdhdb.grpname: DATA_PGOLD ; 0x048: length=10 kfdhdb.fgname: ASMDISK2 ; 0x068: length=8 kfdhdb.capname: ; 0x088: length=0 kfdhdb.crestmp.hi: 33035808 ; 0x0a8: HOUR=0x0 DAYS=0x11 MNTH=0x5 YEAR=0x7e0 kfdhdb.crestmp.lo: 3231790080 ; 0x0ac: USEC=0x0 MSEC=0x4d SECS=0xa MINS=0x30 kfdhdb.mntstmp.hi: 33035808 ; 0x0b0: HOUR=0x0 DAYS=0x11 MNTH=0x5 YEAR=0x7e0 kfdhdb.mntstmp.lo: 3239631872 ; 0x0b4: USEC=0x0 MSEC=0x237 SECS=0x11 MINS=0x30 kfdhdb.secsize: 512 ; 0x0b8: 0x0200 kfdhdb.blksize: 4096 ; 0x0ba: 0x1000 kfdhdb.ausize: 1048576 ; 0x0bc: 0x00100000 kfdhdb.mfact: 113792 ; 0x0c0: 0x0001bc80 kfdhdb.dsksize: 2055 ; 0x0c4: 0x00000807 kfdhdb.pmcnt: 2 ; 0x0c8: 0x00000002 kfdhdb.fstlocn: 1 ; 0x0cc: 0x00000001 kfdhdb.altlocn: 2 ; 0x0d0: 0x00000002 kfdhdb.f1b1locn: 2 ; 0x0d4: 0x00000002 kfdhdb.redomirrors[0]: 0 ; 0x0d8: 0x0000 kfdhdb.redomirrors[1]: 0 ; 0x0da: 0x0000 kfdhdb.redomirrors[2]: 0 ; 0x0dc: 0x0000 kfdhdb.redomirrors[3]: 0 ; 0x0de: 0x0000 kfdhdb.dbcompat: 168820736 ; 0x0e0: 0x0a100000 kfdhdb.grpstmp.hi: 33035808 ; 0x0e4: HOUR=0x0 DAYS=0x11 MNTH=0x5 YEAR=0x7e0 kfdhdb.grpstmp.lo: 3231717376 ; 0x0e8: USEC=0x0 MSEC=0x6 SECS=0xa MINS=0x30
在启用Filter功能下，用dd做测试
[root@db1 log]# dd if=/dev/zero of=/dev/sdb3 dd: writing to `/dev/sdb3': No space left on device 4209031+0 records in 4209030+0 records out 2155023360 bytes (2.2 GB) copied, 235.599 s, 9.1 MB/s [root@db1 log]#
[root@db1 ~]# strings -a /dev/sdb3 ORCLDISKASMDISK3 ASMDISK3 DATA_PGOLD ASMDISK3 0 ...省去了一部分 ORCLDISKASMDISK3 ASMDISK3 DATA_PGOLD ASMDISK3 [root@db1 ~]# [root@db1 ~]#
通过strings查看/dev/sdb3，可以发现，里面的内容并没有被清空
卸载、挂载磁盘组正常
[orgrid@db1 ~]$ asmcmd ASMCMD> lsdg State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/ MOUNTED EXTERN N 512 4096 1048576 2055 1993 0 1993 0 N DATA_PGOLD/ ASMCMD> umount data_pgold ASMCMD> lsdg State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/ ASMCMD> mount data_pgold ASMCMD> lsdg State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/ MOUNTED EXTERN N 512 4096 1048576 2055 1993 0 1993 0 N DATA_PGOLD/ ASMCMD>
/var/log/messages里显示的错误信息
[root@db1 log]# tail -3 messages
May 17 01:10:34 db1 kernel: F 4297082.224/160516171034 flush-8:16[9173] afd_mkrequest_fn: write IO on ASM managed device (major=8/minor=18) not supported i=2 start=8418038 seccnt=2 pstart=4209030 pend=8418060 May 17 01:10:34 db1 kernel: F 4297082.224/160516171034 flush-8:16[9173] afd_mkrequest_fn: write IO on ASM managed device (major=8/minor=18) not supported i=2 start=8418040 seccnt=2 pstart=4209030 pend=8418060 May 17 01:10:34 db1 kernel: F 4297082.224/160516171034 flush-8:16[9173] afd_mkrequest_fn: write IO on ASM managed device (major=8/minor=18) not supported i=2 s [root@db1 log]#
在关闭Filter功能情况下做测试
ASMCMD> afd_filter -d ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK1 DISABLED /dev/sdb1 ASMDISK2 DISABLED /dev/sdb2 ASMDISK3 DISABLED /dev/sdb3 ASMCMD> exit [orgrid@db1 ~]$
备份磁盘的前1024字节并清除，普通用户没权限读
[orgrid@db1 ~]$ dd if=/dev/sdb3 of=block1 bs=1024 count=1 dd: opening `/dev/sdb3': Permission denied [orgrid@db1 ~]$ exit logout [root@db1 ~]# dd if=/dev/sdb3 of=block1 bs=1024 count=1 1+0 records in 1+0 records out 1024 bytes (1.0 kB) copied, 0.00236493 s, 433 kB/s [root@db1 ~]# dd if=/dev/zero of=/dev/sdb3 bs=1024 count=1 1+0 records in 1+0 records out 1024 bytes (1.0 kB) copied, 0.000458225 s, 2.2 MB/s [root@db1 ~]# su - orgrid
卸载、挂载磁盘组DATA_PGOLD
[orgrid@db1 ~]$ asmcmd
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/
MOUNTED EXTERN N 512 4096 1048576 2055 1993 0 1993 0 N DATA_PGOLD/
ASMCMD> umount data_pgold
ASMCMD> mount data_pgold
ORA-15032: not all alterations performed
ORA-15017: diskgroup "DATA_PGOLD" cannot be mounted
ORA-15040: diskgroup is incomplete (DBD ERROR: OCIStmtExecute)
ASMCMD>
可以看出，关闭了Filter功能之后，就会失去保护功能
通过kfed修复
[root@db1 ~]# /orgrid/oracle/product/121/bin/kfed repair /dev/sdb3
[root@db1 ~]# su - orgrid
[orgrid@db1 ~]$ asmcmd
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/
ASMCMD> mount data_pgold
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/
MOUNTED EXTERN N 512 4096 1048576 2055 1993 0 1993 0 N DATA_PGOLD/
ASMCMD>
通过之前dd备份的块做修复
[root@db1 ~]# dd if=block1 of=/dev/sdb2 bs=1024 count=1 conv=notrunc
1+0 records in
1+0 records out
1024 bytes (1.0 kB) copied, 0.000467297 s, 2.2 MB/s
[root@db1 ~]# su - orgrid
[orgrid@db1 ~]$ asmcmd
ASMCMD> mount data_pgold
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 4110 4058 0 4058 0 N DATA_ADF/
MOUNTED EXTERN N 512 4096 1048576 2055 1993 0 1993 0 N DATA_PGOLD/
ASMCMD> exit
[orgrid@db1 ~]$
增加AFD DISK，一般用户没权限添加，必须用root用户
ASMCMD> help afd_label
afd_label
To set the given label to the specified disk
ASMCMD>
[orgrid@db1 ~]$ $ORACLE_HOME/bin/asmcmd afd_label ASMDISK4 /dev/sdb4 ORA-15227: could not perform label set/clear operation ORA-15031: disk specification '/dev/sdb4' matches no disks (DBD ERROR: OCIStmtExecute) ASMCMD-9513: ASM disk label set operation failed. [root@db1 ~]# /orgrid/oracle/product/121/bin/asmcmd afd_label ASMDISK4 /dev/sdb4 Connected to an idle instance. [root@db1 ~]#
常见问题和解答
问：运行afd_configure时遇到ASMCMD-9524: AFD configuration failed 'ERROR: OHASD start failed'
答：安装是如果遇到这个错误，需要安装p19035573_121020_Generic.zip，这个patch实际上是一个asmcmdsys.pm文件
问：什么时候用afd_label --migrate
答：如果是从现有DiskGroup迁移到ASMFD，需要加参数--migrate，否则不需要
Reference
Configure ASMFD
http://docs.oracle.com/database/121/OSTMG/GUID-2F5E344F-AFC2-4768-8C00-6F3C56302123.htm#OSTMG95729
http://docs.oracle.com/database/121/OSTMG/GUID-BB2B3A64-4B83-4A6D-816C-6472FAF9B27A.htm#OSTMG95909
Configure in Restart
http://docs.oracle.com/database/121/OSTMG/GUID-06B3337C-07A3-4B3F-B6CD-04F2916C11F6.htm
http://www.ibm.com/developerworks/cn/linux/l-cn-udev/
https://wiki.archlinux.org/index.php/Udev#Setting_static_device_names
ASMFD 12.2.0.1 Supported Platforms |
|---|
Vendor |
Version | Update/Kernel | Architecture | Bug or PSU |
|---|---|---|---|---|
Oracle Linux – RedHat Compatible Kernel |
6 | All Updates, 2.6.32-71 and later 2.6.32 RedHat Compatible kernels |
X86_64 | Base |
Oracle Linux - Unbreakable Enterprise Kernel |
6 | All Updates, 2.6.39-100 and later UEK 2.6.39 kernels |
X86_64 | Base |
Oracle Linux – Unbreakable Enterprise Kernel |
6 | All Updates, 3.8.13-13 and later UEK 3.8.13 kernels | X86_64 | Base |
|
Oracle Linux – Unbreakable Enterprise Kernel
|
6 | All Updates, 4.1 and later UEK 4.1 kernels |
X86_64 | Base |
Oracle Linux – RedHat Compatible Kernel |
7 | GA release, 3.10.0-123 and through 3.10.0-513 | X86_64 | Base |
Oracle Linux – RedHat Compatible Kernel |
7 | Update 3, 3.10.0-514 and later | X86_64 | Base + Patch 25078431 |
Oracle Linux – RedHat Compatible Kernel |
7 | Update 4, 3.10.0-663 and later RedHat Compatible Kernels | X86_64 | 12.2.0.1.180116 (Base Bug 26247490) |
Oracle Linux – Unbreakable Enterprise Kernel |
7 | All Updates, 3.8.13-35 and later UEK 3.8.13 kernels | X86_64 | Base |
Oracle Linux – Unbreakable Enterprise Kernel |
7 | All Updates, 4.1 and later UEK 4.1 kernels | X86_64 | Base |
RedHat Linux |
6 | All Updates, 2.6.32-279 and later RedHat kernels | X86_64 | Base |
RedHat Linux |
7 | GA release, 3.10.0-123 and through 3.10.0-513 | X86_64 | Base |
RedHat Linux |
7 | Update 4, 3.10.0-663 and later RedHat Compatible Kernels | X86_64 | 12.2.0.1.180116 (Base Bug 26247490) |
Novell SLES |
12 | GA, SP1 | X86_64 | Base |
Solaris |
10 | Update 10 or later | X86_64 and SPARC64 | Base |
Solaris |
11 | Update 10 and later | X86_64 and SPARC64 | Base |
解决在RHEL/CentOS7.4以上版本无法使用AFD(Oracle ASMFD)特性
在7.4以上的redhat或者centos，配置afd不能配置成功，AFD is not ‘supported’，经过查询MOS资料，发现在7.4以上的redhat内核需要升级”kmod”
1、加载afd
[root@rac1 ~]# asmcmd afd_configure
ASMCMD-9520: AFD is not 'supported' -----仅输出不支持的信息，无法得知具体内容
2、查看afd的支持的内核版本
[root@rac1 ~]# afdroot install
AFD-620: AFD is not supported on this operating system version: '3.10.0-693.el7.x86_64'
[root@rac1 ~]# acfsdriverstate -orahome $ORACLE_HOME supported
ACFS-9459: ADVM/ACFS is not supported on this OS version: '3.10.0-693.el7.x86_64'
ACFS-9201: Not Supported
[root@rac1 ~]# uname -a
Linux rac1 3.10.0-693.el7.x86_64 #1 SMP Thu Jul 6 19:56:57 EDT 2017 x86_64 x86_64 x86_64 GNU/Linux
----查看当前系统内核版本确实不被支持
[root@rac1 ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.4 (Maipo)
3、查看kmod版本
[root@rac2 ~]# rpm -qa|grep kmod
kmod-libs-20-15.el7.x86_64
kmod-20-15.el7.x86_64 ----20-15版本
4、升级kmod
[root@rac1 yum.repos.d]# yum install kmod
Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-manager
This system is not registered with an entitlement server. You can use subscription-manager to register.
Local | 3.6 kB 00:00:00
(1/2): Local/group_gz | 166 kB 00:00:00
(2/2): Local/primary_db | 3.1 MB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package kmod.x86_64 0:20-15.el7 will be updated
---> Package kmod.x86_64 0:20-21.el7 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Updating:
kmod x86_64 20-21.el7 Local 121 k
Transaction Summary
=======================================================================================================================
Upgrade 1 Package
Total download size: 121 k
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Warning: RPMDB altered outside of yum.
Updating : kmod-20-21.el7.x86_64 1/2
Cleanup : kmod-20-15.el7.x86_64 2/2
Verifying : kmod-20-21.el7.x86_64 1/2
Verifying : kmod-20-15.el7.x86_64 2/2
Updated:
kmod.x86_64 0:20-21.el7
Complete!
5、再次查看lmod
[grid@rac1:/home/grid]$rpm -qa|grep kmod
kmod-libs-20-15.el7.x86_64
kmod-20-21.el7.x86_64 --->已升级到20-21版本
6、查看afd驱动信息
[root@rac1 yum.repos.d]# acfsdriverstate -orahome $ORACLE_HOME supported
ACFS-9200: Supported 升级kmod之后afd驱动已支持
7、重新安装afd
加载以及配置AFD
[root@rac1 yum.repos.d]# asmcmd afd_configure
加载afd过程：
AFD-627: AFD distribution files found.
AFD-634: Removing previous AFD installation.
AFD-635: Previous AFD components successfully removed.
AFD-636: Installing requested AFD software.
AFD-637: Loading installed AFD drivers.
AFD-9321: Creating udev for AFD.
AFD-9323: Creating module dependencies - this may take some time.
AFD-9154: Loading 'oracleafd.ko' driver.
AFD-649: Verifying AFD devices.
AFD-9156: Detecting control device '/dev/oracleafd/admin'.
AFD-638: AFD installation correctness verified.
Modifying resource dependencies - this may take some time.
查询afd状态信息
[root@rac1 yum.repos.d]# asmcmd afd_state
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'ENABLED' on host 'rac1'
无任何报错，配置成功
MOS id:2303388.1
ACFS and AFD report “Not Supported” after installing appropriate Oracle Grid Infrastructure Patches on RedHat (文档 ID 2303388.1)
了解KMOD
https://www.linux.org/docs/man8/kmod.html
上述为linux对kmod的一段简单描述，简单意思是KMOD是管理linux内核的一个模块，对于用户来说不会直接使用kmod，而是其他一些系统命令会调用。
进入sbin目录发现kmod被做了软连接，很多系统命令会被重定向
[grid@rac1:/sbin]$pwd
/sbin
[grid@rac1:/sbin]$ls -alt | grep kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 insmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 lsmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 modinfo -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 modprobe -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 rmmod -> ../bin/kmod
lrwxrwxrwx 1 root root 11 Feb 15 17:11 depmod -> ../bin/kmod
Oracle ASM Filter Driver (ASMFD) – New Features for Oracle ASM 12.1.0.2
作者：张乐奕
2014 年 12 月发布
什么是 Oracle ASM Filter Driver (ASMFD)？
简单地说，这是一个可以取代 ASMLIB 和 udev 设置的新功能，并且还增加了 I/O Filter 功能，这也体现在该功能的命名中。ASMFD 目前只在 Linux 操作系统中有效，并且必须要使用最新版的 Oracle ASM 12.1.0.2。在之前，由于 Linux 操作系统对于块设备的发现顺序不定，所以在系统重启以后，无法保证原来的 /dev/sda 还是 sda，所以不能直接使用这样原始的设备名来做 ASM Disk 的 Path，因此出现了 ASMLIB，以 Label 的方式给予设备一个固定的名字，而 ASM 则直接使用这个固定的名字来创建 ASM 磁盘，后来 ASMLIB 必须要 ULN 帐号才可以下载了，于是大家全部转到了 udev 方式，我还因此写了几篇文章来阐述在 Linux 中如何设置 udev rule。比如：
How to use udev for Oracle ASM in Oracle Linux 6
Oracle Datafiles & Block Device & Parted & Udev
现在 Oracle 推出了 ASMFD，可以一举取代 ASMLIB 和手动设置 udev rules 文件的繁琐，并且最重要的是 I/O Filter 功能。
什么是 I/O Filter 功能？
文档原文如下：
The Oracle ASM Filter Driver rejects any I/O requests that are invalid. This action eliminates accidental overwrites of Oracle ASM disks that would cause corruption in the disks and files within the disk group. For example, the Oracle ASM Filter Driver filters out all non-Oracle I/Os which could cause accidental overwrites.
意思是：该功能可以拒绝所有无效的 I/O 请求，最主要的作用是防止意外覆写 ASM 磁盘的底层盘，在后面的测试中可以看到对于 root 用户的 dd 全盘清零这样的变态操作也都是可以过滤的。
真是不错，那么该怎么启用这个功能呢？
通常我们原先的 ASM 中都应该使用的是 ASMLIB 或者 udev 绑定的设备，这里就直接描述如何将原先的设备名重新命名为新的 AFD 设备名。
--确认目前 ASMFD 模块（以下简称 AFD）的状态，未加载。
[grid@dbserver1 ~]$ asmcmd afd_state
ASMCMD-9526: The AFD state is 'NOT INSTALLED' and filtering is 'DEFAULT' on host 'dbserver1.vbox.com'
--获取当前 ASM 磁盘发现路径，我这里是使用 udev 绑定的名称
[grid@dbserver1 ~]$ asmcmd dsget
parameter:/dev/asm*
profile:/dev/asm*
--设置 ASM 磁盘路径，将新的 Disk String 加入
--可以看到在设置该参数时，ASM 会检查现有已经加载的磁盘，如果不在发现路径上，将会报错。
[grid@dbserver1 ~]$ asmcmd dsset AFD:*
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-15014: path '/dev/asm-disk7' is not in the discovery set (DBD ERROR: OCIStmtExecute)
--因此我们必须将新的路径加在原始路径后面，设置成多种路径，该操作会运行一段时间，视 ASM 磁盘多少而定
[grid@dbserver1 ~]$ asmcmd dsset '/dev/asm*','AFD:*'
[grid@dbserver1 ~]$ asmcmd dsget
parameter:/dev/asm*, AFD:*
profile:/dev/asm*,AFD:*
--检查现在 GI 环境中的节点。
[grid@dbserver1 ~]$ olsnodes -a
dbserver1 Hub
dbserver2 Hub
--以下命令必须在所有 Hub 节点上都运行，可以使用 Rolling 的方式。以下命令有些需要 root 用户，有些需要 grid 用户，请注意 #
或者 $ 不同的提示符表示不同的用户。
--先停止crs
[root@dbserver1 ~]# crsctl stop crs
--作 AFD Configure，实际上这是一个解压程序包，安装，并加载 Driver 的过程，需要消耗一些时间
[root@dbserver1 ~]# asmcmd afd_configure
Connected to an idle instance.
AFD-627: AFD distribution files found.
AFD-636: Installing requested AFD software.
AFD-637: Loading installed AFD drivers.
AFD-9321: Creating udev for AFD.
AFD-9323: Creating module dependencies - this may take some time.
AFD-9154: Loading 'oracleafd.ko' driver.
AFD-649: Verifying AFD devices.
AFD-9156: Detecting control device '/dev/oracleafd/admin'.
AFD-638: AFD installation correctness verified.
Modifying resource dependencies - this may take some time.
--结束以后，可以再次检查 AFD 状态，显示已加载。
[root@dbserver1 ~]# asmcmd afd_state
Connected to an idle instance.
ASMCMD-9526: The AFD state is 'LOADED' and filtering is 'DEFAULT' on host 'dbserver1.vbox.com'
--接下来需要设置 AFD 自己的磁盘发现路径了，其实这里很像以前 ASMLIB 的操作。
--设置 AFD 磁盘发现路径，必须先启动 CRS，否则将会遇到下面的错误。同时也可以看到这个信息是存储在每个节点自己的 OLR 中，因此
必须在所有节点中都设置。
[root@dbserver1 ~]# asmcmd afd_dsget
Connected to an idle instance.
ASMCMD-9511: failed to obtain required AFD disk string from Oracle Local Repository
[root@dbserver1 ~]#
[root@dbserver1 ~]# asmcmd afd_dsset '/dev/sd*'
Connected to an idle instance.
ASMCMD-9512: failed to update AFD disk string in Oracle Local Repository.
--启动 CRS
[root@dbserver1 ~]# crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
--此时查看后台的 ASM 告警日志，可以看到加载的磁盘仍然使用的是原始路径。但是也可以看到 libafd 已经成功加载。
2014-11-20 17:01:04.545000 +08:00
NOTE: Loaded library: /opt/oracle/extapi/64/asm/orcl/1/libafd12.so
ORACLE_BASE from environment = /u03/app/grid
SQL> ALTER DISKGROUP ALL MOUNT /* asm agent call crs *//* {0:9:3} */
NOTE: Diskgroup used for Voting files is:
CRSDG
Diskgroup with spfile:CRSDG
NOTE: Diskgroup used for OCR is:CRSDG
NOTE: Diskgroups listed in ASM_DISKGROUP are
DATADG
NOTE: cache registered group CRSDG 1/0xB8E8EA0B
NOTE: cache began mount (first) of group CRSDG 1/0xB8E8EA0B
NOTE: cache registered group DATADG 2/0xB8F8EA0C
NOTE: cache began mount (first) of group DATADG 2/0xB8F8EA0C
NOTE: Assigning number (1,2) to disk (/dev/asm-disk3)
NOTE: Assigning number (1,1) to disk (/dev/asm-disk2)
NOTE: Assigning number (1,0) to disk (/dev/asm-disk1)
NOTE: Assigning number (1,5) to disk (/dev/asm-disk10)
NOTE: Assigning number (1,3) to disk (/dev/asm-disk8)
NOTE: Assigning number (1,4) to disk (/dev/asm-disk9)
NOTE: Assigning number (2,3) to disk (/dev/asm-disk7)
NOTE: Assigning number (2,2) to disk (/dev/asm-disk6)
NOTE: Assigning number (2,1) to disk (/dev/asm-disk5)
NOTE: Assigning number (2,5) to disk (/dev/asm-disk12)
NOTE: Assigning number (2,0) to disk (/dev/asm-disk4)
NOTE: Assigning number (2,6) to disk (/dev/asm-disk13)
NOTE: Assigning number (2,4) to disk (/dev/asm-disk11)
--将 afd_ds 设置为 ASM 磁盘的底层磁盘设备名，这样以后就不再需要手工配置 udev rules 了。
[grid@dbserver1 ~]$ asmcmd afd_dsset '/dev/sd*'
[grid@dbserver1 ~]$ asmcmd afd_dsget
AFD discovery string: /dev/sd*
--我在测试的时候，上面犯了一个错误，将路径设置为了“dev/sd*”，缺少了最开始的根目录。因此此处没有发现任何磁盘，如果你的测试中，
这一步已经可以发现磁盘，请告诉我。
[grid@dbserver1 ~]$ asmcmd afd_lsdsk
There are no labelled devices.
--再次提醒，到此为止的所有命令，都必须要在集群环境的所有节点中都执行。
--接下来就是将原先的 ASM 磁盘路径从 udev 转到 AFD
--先检查现在的磁盘路径
[root@dbserver1 ~]# ocrcheck -config
Oracle Cluster Registry configuration is :
Device/File Name : +CRSDG
[root@dbserver1 ~]# crsctl query css votedisk
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 4838a0ee7bfa4fbebf8ff9f58642c965 (/dev/asm-disk1) [CRSDG]
2. ONLINE 72057097a36e4f02bfc7b5e23672e4cc (/dev/asm-disk2) [CRSDG]
3. ONLINE 7906e2fb24d24faebf9b82bba6564be3 (/dev/asm-disk3) [CRSDG]
Located 3 voting disk(s).
[root@dbserver1 ~]# su - grid
[grid@dbserver1 ~]$ asmcmd lsdsk -G CRSDG
Path
/dev/asm-disk1
/dev/asm-disk10
/dev/asm-disk2
/dev/asm-disk3
/dev/asm-disk8
/dev/asm-disk9
--由于要修改 OCR 所在的磁盘，因此修改之前需要停止 Cluster。
[root@dbserver1 ~]# crsctl stop cluster -all
--直接修改会报错，因为 /dev/asm-disk1 已经存在在 ASM 中了。
[grid@dbserver1 ~]$ asmcmd afd_label asmdisk01 /dev/asm-disk1
Connected to an idle instance.
ASMCMD-9513: ASM disk label set operation failed.
disk /dev/asm-disk1 is already provisioned for ASM
--必须要增加 migrate 关键字，才可以成功。
[grid@dbserver1 ~]$ asmcmd afd_label asmdisk01 /dev/asm-disk1 --migrate
Connected to an idle instance.
[grid@dbserver1 ~]$ asmcmd afd_lsdsk
Connected to an idle instance.
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMDISK01 ENABLED /dev/asm-disk1
--在我的测试 ASM 中，一共有 13 块磁盘，因此依次修改。
asmcmd afd_label asmdisk01 /dev/asm-disk1 --migrate
asmcmd afd_label asmdisk02 /dev/asm-disk2 --migrate
asmcmd afd_label asmdisk03 /dev/asm-disk3 --migrate
asmcmd afd_label asmdisk04 /dev/asm-disk4 --migrate
asmcmd afd_label asmdisk05 /dev/asm-disk5 --migrate
asmcmd afd_label asmdisk06 /dev/asm-disk6 --migrate
asmcmd afd_label asmdisk07 /dev/asm-disk7 --migrate
asmcmd afd_label asmdisk08 /dev/asm-disk8 --migrate
asmcmd afd_label asmdisk09 /dev/asm-disk9 --migrate
asmcmd afd_label asmdisk10 /dev/asm-disk10 --migrate
asmcmd afd_label asmdisk11 /dev/asm-disk11 --migrate
asmcmd afd_label asmdisk12 /dev/asm-disk12 --migrate
asmcmd afd_label asmdisk13 /dev/asm-disk13 --migrate
[grid@dbserver1 ~]$ asmcmd afd_lsdsk
Connected to an idle instance.
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMDISK01 ENABLED /dev/asm-disk1
ASMDISK02 ENABLED /dev/asm-disk2
ASMDISK03 ENABLED /dev/asm-disk3
ASMDISK04 ENABLED /dev/asm-disk4
ASMDISK05 ENABLED /dev/asm-disk5
ASMDISK06 ENABLED /dev/asm-disk6
ASMDISK07 ENABLED /dev/asm-disk7
ASMDISK08 ENABLED /dev/asm-disk8
ASMDISK09 ENABLED /dev/asm-disk9
ASMDISK10 ENABLED /dev/asm-disk10
ASMDISK11 ENABLED /dev/asm-disk11
ASMDISK12 ENABLED /dev/asm-disk12
ASMDISK13 ENABLED /dev/asm-disk13
--在另外的节点中，不再需要作 label，而是直接 scan 即可，这跟使用 ASMLIB 的操作非常相像。
[grid@dbserver2 ~]$ asmcmd afd_scan
Connected to an idle instance.
[grid@dbserver2 ~]$ asmcmd afd_lsdsk
Connected to an idle instance.
--------------------------------------------------------------------------------
Label Filtering Path
================================================================================
ASMDISK12 ENABLED /dev/asm-disk12
ASMDISK09 ENABLED /dev/asm-disk9
ASMDISK08 ENABLED /dev/asm-disk8
ASMDISK11 ENABLED /dev/asm-disk11
ASMDISK10 ENABLED /dev/asm-disk10
ASMDISK13 ENABLED /dev/asm-disk13
ASMDISK01 ENABLED /dev/asm-disk1
ASMDISK04 ENABLED /dev/asm-disk4
ASMDISK06 ENABLED /dev/asm-disk6
ASMDISK07 ENABLED /dev/asm-disk7
ASMDISK05 ENABLED /dev/asm-disk5
ASMDISK03 ENABLED /dev/asm-disk3
ASMDISK02 ENABLED /dev/asm-disk2
--重新启动 Cluster
[root@dbserver1 ~]# crsctl start cluster -all
--可以看到 ASM 告警日志中已经显示开始使用新的名称。关于其中 WARNING 的含义表示目前 AFD 还不支持 Advanced Format 格式的
磁盘，普通磁盘格式一个扇区是 512 字节，而高级格式则为 4K 字节。
2014-11-20 17:46:16.695000 +08:00
* allocate domain 1, invalid = TRUE
* instance 2 validates domain 1
NOTE: cache began mount (not first) of group CRSDG 1/0x508D0B98
NOTE: cache registered group DATADG 2/0x509D0B99
* allocate domain 2, invalid = TRUE
* instance 2 validates domain 2
NOTE: cache began mount (not first) of group DATADG 2/0x509D0B99
WARNING: Library 'AFD Library - Generic , version 3 (KABI_V3)' does not support advanced format disks
NOTE: Assigning number (1,0) to disk (AFD:ASMDISK01)
NOTE: Assigning number (1,1) to disk (AFD:ASMDISK02)
NOTE: Assigning number (1,2) to disk (AFD:ASMDISK03)
NOTE: Assigning number (1,3) to disk (AFD:ASMDISK08)
NOTE: Assigning number (1,4) to disk (AFD:ASMDISK09)
NOTE: Assigning number (1,5) to disk (AFD:ASMDISK10)
NOTE: Assigning number (2,0) to disk (AFD:ASMDISK04)
NOTE: Assigning number (2,1) to disk (AFD:ASMDISK05)
NOTE: Assigning number (2,2) to disk (AFD:ASMDISK06)
NOTE: Assigning number (2,3) to disk (AFD:ASMDISK07)
NOTE: Assigning number (2,4) to disk (AFD:ASMDISK11)
NOTE: Assigning number (2,5) to disk (AFD:ASMDISK12)
NOTE: Assigning number (2,6) to disk (AFD:ASMDISK13)
--检查磁盘加载路径，以及功能全部是 AFD 样式了。
[grid@dbserver1 ~]$ asmcmd lsdsk
Path
AFD:ASMDISK01
AFD:ASMDISK02
AFD:ASMDISK03
AFD:ASMDISK04
AFD:ASMDISK05
AFD:ASMDISK06
AFD:ASMDISK07
AFD:ASMDISK08
AFD:ASMDISK09
AFD:ASMDISK10
AFD:ASMDISK11
AFD:ASMDISK12
AFD:ASMDISK13
--但是我们可以看到在数据字典中仍然存在之前的磁盘路径。
SQL> select NAME,LABEL,PATH from V$ASM_DISK;
NAME LABEL PATH
-------------------- ------------------------------- ---------------------------------------------
/dev/asm-disk7
/dev/asm-disk6
/dev/asm-disk13
/dev/asm-disk12
/dev/asm-disk11
/dev/asm-disk4
/dev/asm-disk2
/dev/asm-disk9
/dev/asm-disk3
/dev/asm-disk5
/dev/asm-disk10
/dev/asm-disk8
/dev/asm-disk1
CRSDG_0000 ASMDISK01 AFD:ASMDISK01
CRSDG_0001 ASMDISK02 AFD:ASMDISK02
CRSDG_0002 ASMDISK03 AFD:ASMDISK03
DATADG_0000 ASMDISK04 AFD:ASMDISK04
DATADG_0001 ASMDISK05 AFD:ASMDISK05
DATADG_0002 ASMDISK06 AFD:ASMDISK06
DATADG_0003 ASMDISK07 AFD:ASMDISK07
CRSDG_0003 ASMDISK08 AFD:ASMDISK08
CRSDG_0004 ASMDISK09 AFD:ASMDISK09
CRSDG_0005 ASMDISK10 AFD:ASMDISK10
DATADG_0004 ASMDISK11 AFD:ASMDISK11
DATADG_0005 ASMDISK12 AFD:ASMDISK12
DATADG_0006 ASMDISK13 AFD:ASMDISK13
26 rows selected.
--需要将 ASM 磁盘发现路径（注意，这跟设置 AFD 磁盘发现路径不是一个命令）中原先的路径去除，只保留 AFD 路径。
[grid@dbserver1 ~]$ asmcmd dsset 'AFD:*'
[grid@dbserver1 ~]$ asmcmd dsget
parameter:AFD:*
profile:AFD:*
--再次重启 ASM，一切正常了。
SQL> select NAME,LABEL,PATH from V$ASM_DISK;
NAME LABEL PATH
-------------------- ------------------------------- -------------------------------------------------------
CRSDG_0000 ASMDISK01 AFD:ASMDISK01
CRSDG_0001 ASMDISK02 AFD:ASMDISK02
CRSDG_0002 ASMDISK03 AFD:ASMDISK03
DATADG_0000 ASMDISK04 AFD:ASMDISK04
DATADG_0001 ASMDISK05 AFD:ASMDISK05
DATADG_0002 ASMDISK06 AFD:ASMDISK06
DATADG_0003 ASMDISK07 AFD:ASMDISK07
CRSDG_0003 ASMDISK08 AFD:ASMDISK08
CRSDG_0004 ASMDISK09 AFD:ASMDISK09
CRSDG_0005 ASMDISK10 AFD:ASMDISK10
DATADG_0004 ASMDISK11 AFD:ASMDISK11
DATADG_0005 ASMDISK12 AFD:ASMDISK12
DATADG_0006 ASMDISK13 AFD:ASMDISK13
13 rows selected.
--收尾工作，将原先的 udev rules 文件移除。当然，这要在所有节点中都运行。以后如果服务器再次重启，AFD 就会完全接管了。
[root@dbserver1 ~]# mv /etc/udev/rules.d/99-oracle-asmdevices.rules ~oracle/
还有什么发现？
其实，AFD 也在使用 udev。囧。
[grid@dbserver1 ~]$ cat /etc/udev/rules.d/53-afd.rules # # AFD devices KERNEL=="oracleafd/.*", OWNER="grid", GROUP="asmdba", MODE="0770" KERNEL=="oracleafd/*", OWNER="grid", GROUP="asmdba", MODE="0770" KERNEL=="oracleafd/disks/*", OWNER="grid", GROUP="asmdba", MODE="0660"
Label 过后的磁盘在 /dev/oracleafd/disks 目录中可以找到。
[root@dbserver2 disks]# ls -l /dev/oracleafd/disks total 52 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK01 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK02 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK03 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK04 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK05 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK06 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK07 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK08 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK09 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK10 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK11 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK12 -rw-r--r-- 1 root root 9 Nov 20 18:52 ASMDISK13
这里有一个很大不同，所有磁盘的属主变成了 root，并且只有 root 才有写入的权限。很多文章认为，这就是 AFD 的 filter 功能体现了，因为现在用 oracle 或者 grid 用户都没有办法直接对 ASM 磁盘进行写入操作，自然就获得了一层保护。比如以下命令会直接报权限不足。
[oracle@dbserver1 disks]$ echo "do some evil" > ASMDISK99 -bash: ASMDISK99: Permission denied
但是如果你认为这就是 AFD 的保护功能，那也太小看 Oracle 了，仅仅是这样也对不起名字中 Filter 字样。且看后面分解。
操作系统中也可以看到 AFD 磁盘和底层磁盘的对应关系。
[grid@dbserver1 /]$ ls -l /dev/disk/by-label/ total 0 lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK01 -> ../../sdc lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK02 -> ../../sdd lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK03 -> ../../sde lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK04 -> ../../sdf lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK05 -> ../../sdg lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK06 -> ../../sdh lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK07 -> ../../sdi lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK08 -> ../../sdj lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK09 -> ../../sdk lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK10 -> ../../sdl lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK11 -> ../../sdm lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK12 -> ../../sdn lrwxrwxrwx 1 root root 9 Nov 20 19:17 ASMDISK13 -> ../../sdo
再次重启服务器以后，afd_lsdsk 的结果中显示的路径都已经变为底层磁盘，但是 Filtering 却变成了 DISABLED。不要在意这里的 Label 和 Path 的对应和上面的不一样，因为有些是在节点 1 中执行的结果，有些是在节点 2 中执行的结果，而这也是 AFD 功能的展示，不管两边机器发现块设备的顺序是不是一样，只要绑定了 AFD 的 Label，就没问题了。
ASMCMD> afd_lsdsk -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK01 DISABLED /dev/sdd ASMDISK02 DISABLED /dev/sde ASMDISK03 DISABLED /dev/sdf ASMDISK04 DISABLED /dev/sdg ASMDISK05 DISABLED /dev/sdh ASMDISK06 DISABLED /dev/sdi ASMDISK07 DISABLED /dev/sdj ASMDISK08 DISABLED /dev/sdk ASMDISK09 DISABLED /dev/sdl ASMDISK10 DISABLED /dev/sdm ASMDISK11 DISABLED /dev/sdn ASMDISK12 DISABLED /dev/sdo ASMDISK13 DISABLED /dev/sdp
最后，该来测试一下 I/O Filter 功能了吧，等好久了！
对，这才是重点。
先看一下如何启用或者禁用 Filter 功能。在我的测试中，单独设置某块盘启用还是禁用是不生效的，只能全局启用或者禁用。
[grid@dbserver1 ~]$ asmcmd help afd_filter
afd_filter
Sets the AFD filtering mode on a given disk path.
If the command is executed without specifying a disk path then
filtering is set at node level.
Synopsis
afd_filter {-e | -d } [<disk-path>]
Description
The options for afd_filter are described below
-e - enable AFD filtering mode
-d - disable AFD filtering mode
Examples
The following example uses afd_filter to enable AFD filtering
on a given diskpath.
ASMCMD [+] >afd_filter -e /dev/sdq
See Also
afd_lsdsk afd_state
启用 Filter 功能。
[grid@dbserver1 ~]$ asmcmd afd_filter -e [grid@dbserver1 ~]$ asmcmd afd_lsdsk Connected to an idle instance. -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK01 ENABLED /dev/sdb ASMDISK02 ENABLED /dev/sdc ASMDISK03 ENABLED /dev/sdd ASMDISK04 ENABLED /dev/sde ASMDISK05 ENABLED /dev/sdf ASMDISK06 ENABLED /dev/sdg ASMDISK07 ENABLED /dev/sdh ASMDISK08 ENABLED /dev/sdi ASMDISK09 ENABLED /dev/sdj ASMDISK10 ENABLED /dev/sdk ASMDISK11 ENABLED /dev/sdl ASMDISK12 ENABLED /dev/sdm ASMDISK13 ENABLED /dev/sdn
为了以防万一，不破坏我自己的实验环境，增加了一块磁盘来作测试。
[root@dbserver1 ~]# asmcmd afd_label asmdisk99 /dev/sdo Connected to an idle instance. [root@dbserver1 ~]# asmcmd afd_lsdsk Connected to an idle instance. -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK01 ENABLED /dev/sdb ASMDISK02 ENABLED /dev/sdc ASMDISK03 ENABLED /dev/sdd ASMDISK04 ENABLED /dev/sde ASMDISK05 ENABLED /dev/sdf ASMDISK06 ENABLED /dev/sdg ASMDISK07 ENABLED /dev/sdh ASMDISK08 ENABLED /dev/sdi ASMDISK09 ENABLED /dev/sdj ASMDISK10 ENABLED /dev/sdk ASMDISK11 ENABLED /dev/sdl ASMDISK12 ENABLED /dev/sdm ASMDISK13 ENABLED /dev/sdn ASMDISK99 ENABLED /dev/sdo
创建一个新的磁盘组。
[grid@dbserver1 ~]$ sqlplus / AS sysasm SQL> CREATE diskgroup DGTEST external redundancy disk 'AFD:ASMDISK99'; Diskgroup created.
先用 KFED 读取一下磁盘头，验证一下确实无误。
[grid@dbserver1 ~]$ kfed read AFD:ASMDISK99 kfbh.endian: 1 ; 0x000: 0x01 kfbh.hard: 130 ; 0x001: 0x82 kfbh.type: 1 ; 0x002: KFBTYP_DISKHEAD kfbh.datfmt: 1 ; 0x003: 0x01 kfbh.block.blk: 0 ; 0x004: blk=0 kfbh.block.obj: 2147483648 ; 0x008: disk=0 kfbh.check: 1854585587 ; 0x00c: 0x6e8abaf3 kfbh.fcn.base: 0 ; 0x010: 0x00000000 kfbh.fcn.wrap: 0 ; 0x014: 0x00000000 kfbh.spare1: 0 ; 0x018: 0x00000000 kfbh.spare2: 0 ; 0x01c: 0x00000000 kfdhdb.driver.provstr:ORCLDISKASMDISK99 ; 0x000: length=17 kfdhdb.driver.reserved[0]: 1145918273 ; 0x008: 0x444d5341 kfdhdb.driver.reserved[1]: 961237833 ; 0x00c: 0x394b5349 kfdhdb.driver.reserved[2]: 57 ; 0x010: 0x00000039 kfdhdb.driver.reserved[3]: 0 ; 0x014: 0x00000000 kfdhdb.driver.reserved[4]: 0 ; 0x018: 0x00000000 kfdhdb.driver.reserved[5]: 0 ; 0x01c: 0x00000000 kfdhdb.compat: 168820736 ; 0x020: 0x0a100000 kfdhdb.dsknum: 0 ; 0x024: 0x0000 kfdhdb.grptyp: 1 ; 0x026: KFDGTP_EXTERNAL kfdhdb.hdrsts: 3 ; 0x027: KFDHDR_MEMBER kfdhdb.dskname: ASMDISK99 ; 0x028: length=9 kfdhdb.grpname: DGTEST ; 0x048: length=6 kfdhdb.fgname: ASMDISK99 ; 0x068: length=9
直接使用 dd 尝试将整个磁盘清零。 dd 命令本身没有任何错误返回。
[root@dbserver1 ~]# dd if=/dev/zero of=/dev/sdo dd: writing to `/dev/sdo': No space left on device 409601+0 records in 409600+0 records out 209715200 bytes (210 MB) copied, 19.9602 s, 10.5 MB/s
之后重新 mount 磁盘组，如果磁盘被清零，在重新 mount 的时候一定会出现错误，而现在正常挂载。
SQL> ALTER diskgroup DGTEST dismount; Diskgroup altered. SQL> ALTER diskgroup DGTEST mount; Diskgroup altered.
觉得不过瘾？那再创建一个表空间，插入一些数据，做一次 checkpoint，仍然一切正常。
SQL> CREATE tablespace test datafile '+DGTEST' SIZE 100M; Tablespace created. SQL> CREATE TABLE t_afd (n NUMBER) tablespace test; TABLE created. SQL> INSERT INTO t_afd VALUES(1); 1 ROW created. SQL> commit; Commit complete. SQL> ALTER system checkpoint; System altered. SQL> SELECT COUNT(*) FROM t_afd; COUNT(*)---------- 1
但是诡异的是，这时候在操作系统级别直接去读取 /dev/sdo 的内容，会显示全部都已经被清空为 0 了。
[root@dbserver1 ~]# od -c -N 256 /dev/sdo 0000000 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0000400
使用 strings 命令也完全看不到任何有意义的字符。
[root@dbserver1 disks]# strings /dev/sdo [root@dbserver1 disks]#
但是，千万不要被这样的假象迷惑，以为磁盘真的被清空了，在 dd 的时候，/var/log/message 会产生大量日志，明确表示这些在 ASM 管理的设备上的 IO 操作都是不被支持，这才是 Filter 真正起作用的场合。
afd_mkrequest_fn: write IO on ASM managed device (major=8/minor=224) not supported
使用 kfed ，仍然可以读取到正常的信息。
[grid@dbserver1 ~]$ kfed read AFD:ASMDISK99 kfbh.endian: 1 ; 0x000: 0x01 kfbh.hard: 130 ; 0x001: 0x82 kfbh.type: 1 ; 0x002: KFBTYP_DISKHEAD kfbh.datfmt: 1 ; 0x003: 0x01 kfbh.block.blk: 0 ; 0x004: blk=0 kfbh.block.obj: 2147483648 ; 0x008: disk=0 kfbh.check: 1854585587 ; 0x00c: 0x6e8abaf3 kfbh.fcn.base: 0 ; 0x010: 0x00000000 kfbh.fcn.wrap: 0 ; 0x014: 0x00000000 kfbh.spare1: 0 ; 0x018: 0x00000000 kfbh.spare2: 0 ; 0x01c: 0x00000000 kfdhdb.driver.provstr:ORCLDISKASMDISK99 ; 0x000: length=17 ......
直到重新启动服务器（重新启动 ASM，重新启动 Cluster，在操作系统仍然看到的是清零后的数据），所有的数据又回来了。目前还不确认 Oracle 是使用了怎样的重定向技术实现了这样的神奇效果。
[root@dbserver1 ~]# od -c -N 256 /dev/sdo 0000000 001 202 001 001 \0 \0 \0 \0 \0 \0 \0 200 u 177 D I 0000020 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 O R C L D I S K A S M D I S K 9 0000060 9 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000100 \0 \0 020 \n \0 \0 001 003 A S M D I S K 9 0000120 9 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000140 \0 \0 \0 \0 \0 \0 \0 \0 D G T E S T \0 \0 0000160 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000200 \0 \0 \0 \0 \0 \0 \0 \0 A S M D I S K 9 0000220 9 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000240 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 * 0000300 \0 \0 \0 \0 \0 \0 \0 \0 022 257 367 001 \0 X \0 247 0000320 022 257 367 001 \0 h 036 344 \0 002 \0 020 \0 \0 020 \0 0000340 200 274 001 \0 310 \0 \0 \0 002 \0 \0 \0 001 \0 \0 \0 0000360 002 \0 \0 \0 002 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000400 [root@dbserver1 ~]# [root@dbserver1 ~]# strings /dev/sdo | grep ASM ORCLDISKASMDISK99 ASMDISK99 ASMDISK99 ORCLDISKASMDISK99 ASMDISK99 ASMDISK99 ASMDISK99 ASMDISK99 ASMPARAMETERFILE ASMPARAMETERBAKFILE ASM_STALE
最后将 Filter 禁用之后再测试。
[root@dbserver1 ~]# asmcmd afd_filter -d Connected to an idle instance. [root@dbserver1 ~]# asmcmd afd_lsdsk Connected to an idle instance. -------------------------------------------------------------------------------- Label Filtering Path ================================================================================ ASMDISK01 DISABLED /dev/sdb ASMDISK02 DISABLED /dev/sdc ASMDISK03 DISABLED /dev/sdd ASMDISK04 DISABLED /dev/sde ASMDISK05 DISABLED /dev/sdf ASMDISK06 DISABLED /dev/sdg ASMDISK07 DISABLED /dev/sdh ASMDISK08 DISABLED /dev/sdi ASMDISK09 DISABLED /dev/sdj ASMDISK10 DISABLED /dev/sdk ASMDISK11 DISABLED /dev/sdl ASMDISK12 DISABLED /dev/sdm ASMDISK13 DISABLED /dev/sdn ASMDISK99 DISABLED /dev/sdo
同样使用 dd 命令清零整个磁盘。
[root@dbserver1 ~]# dd if=/dev/zero of=/dev/sdo dd: writing to `/dev/sdo': No space left on device 409601+0 records in 409600+0 records out 209715200 bytes (210 MB) copied, 4.46444 s, 47.0 MB/s
重新 mount 磁盘组，如期报错，磁盘组无法加载。
SQL> alter diskgroup DGTEST dismount; Diskgroup altered. SQL> alter diskgroup DGTEST mount; alter diskgroup DGTEST mount * ERROR at line 1: ORA-15032: not all alterations performed ORA-15017: diskgroup "DGTEST" cannot be mounted ORA-15040: diskgroup is incomplete
重新启动数据库，也会发现由于表空间中数据库不存在而导致数据库无法正常 Open。
SQL> startup ORACLE instance started. Total System Global Area 838860800 bytes Fixed SIZE 2929936 bytes Variable >SIZE 385878768 bytesDATABASE Buffers 226492416 bytes Redo Buffers 5455872 bytes In-Memory Area 218103808 bytesDATABASE mounted. ORA-01157: cannot identify/LOCK DATA file 15 - see DBWR trace file ORA-01110: DATA file 15: '+DGTEST/CDB12C/DATAFILE/test.256.864163075'