Android9.0 View的绘制源码解析

一.开始

在Activity的onCreate方法中setContenView后,创建了mDecorView,那么它是怎么执行onMeause,onLayout,onDraw方法的呢?我们从源码分析开始。

二.源码解析

Activity的入口是在ActivityThread执行的,我们看下ActivityThread中有handleMessage方法中RELAUNCH_ACTIVITY,执行handleRelaunchActivityLocally方法

 public void handleMessage(Message msg) {
            if (DEBUG_MESSAGES) Slog.v(TAG, ">>> handling: " + codeToString(msg.what));
            switch (msg.what) {
                ...
               case RELAUNCH_ACTIVITY:
                    handleRelaunchActivityLocally((IBinder) msg.obj);
                    break;
}
}

该方法最后,执行了handleLaunchActivity方法,看下其方法

 public Activity handleLaunchActivity(ActivityClientRecord r,
            PendingTransactionActions pendingActions, Intent customIntent) {
        // If we are getting ready to gc after going to the background, well
        // we are back active so skip it.
        unscheduleGcIdler();
        mSomeActivitiesChanged = true;

        if (r.profilerInfo != null) {
            mProfiler.setProfiler(r.profilerInfo);
            mProfiler.startProfiling();
        }

        if (r.mPendingFixedRotationAdjustments != null) {
            // The rotation adjustments must be applied before handling configuration, so process
            // level display metrics can be adjusted.
            overrideApplicationDisplayAdjustments(r.token, adjustments ->
                    adjustments.setFixedRotationAdjustments(r.mPendingFixedRotationAdjustments));
        }

        // Make sure we are running with the most recent config.
        handleConfigurationChanged(null, null);

        if (localLOGV) Slog.v(
            TAG, "Handling launch of " + r);

        // Initialize before creating the activity
        if (!ThreadedRenderer.sRendererDisabled
                && (r.activityInfo.flags & ActivityInfo.FLAG_HARDWARE_ACCELERATED) != 0) {
            HardwareRenderer.preload();
        }
        WindowManagerGlobal.initialize();

        // Hint the GraphicsEnvironment that an activity is launching on the process.
        GraphicsEnvironment.hintActivityLaunch();

        final Activity a = performLaunchActivity(r, customIntent);

        if (a != null) {
            r.createdConfig = new Configuration(mConfiguration);
            reportSizeConfigurations(r);
            if (!r.activity.mFinished && pendingActions != null) {
                pendingActions.setOldState(r.state);
                pendingActions.setRestoreInstanceState(true);
                pendingActions.setCallOnPostCreate(true);
            }
        } else {
            // If there was an error, for any reason, tell the activity manager to stop us.
            try {
                ActivityTaskManager.getService()
                        .finishActivity(r.token, Activity.RESULT_CANCELED, null,
                                Activity.DONT_FINISH_TASK_WITH_ACTIVITY);
            } catch (RemoteException ex) {
                throw ex.rethrowFromSystemServer();
            }
        }

        return a;
    }

其中final Activity a = performLaunchActivity(r, customIntent),执行performLaunchActivity方法,看其详情

private Activity performLaunchActivity(ActivityClientRecord r, Intent customIntent) {
        ActivityInfo aInfo = r.activityInfo;
        if (r.packageInfo == null) {
            r.packageInfo = getPackageInfo(aInfo.applicationInfo, r.compatInfo,
                    Context.CONTEXT_INCLUDE_CODE);
        }

        ComponentName component = r.intent.getComponent();
        if (component == null) {
            component = r.intent.resolveActivity(
                mInitialApplication.getPackageManager());
            r.intent.setComponent(component);
        }

        if (r.activityInfo.targetActivity != null) {
            component = new ComponentName(r.activityInfo.packageName,
                    r.activityInfo.targetActivity);
        }

        ContextImpl appContext = createBaseContextForActivity(r);
        Activity activity = null;
        try {
            java.lang.ClassLoader cl = appContext.getClassLoader();
            activity = mInstrumentation.newActivity(
                    cl, component.getClassName(), r.intent);
            StrictMode.incrementExpectedActivityCount(activity.getClass());
            r.intent.setExtrasClassLoader(cl);
            r.intent.prepareToEnterProcess();
            if (r.state != null) {
                r.state.setClassLoader(cl);
            }
        } catch (Exception e) {
            if (!mInstrumentation.onException(activity, e)) {
                throw new RuntimeException(
                    "Unable to instantiate activity " + component
                    + ": " + e.toString(), e);
            }
        }

        try {
            Application app = r.packageInfo.makeApplication(false, mInstrumentation);

            if (localLOGV) Slog.v(TAG, "Performing launch of " + r);
            if (localLOGV) Slog.v(
                    TAG, r + ": app=" + app
                    + ", appName=" + app.getPackageName()
                    + ", pkg=" + r.packageInfo.getPackageName()
                    + ", comp=" + r.intent.getComponent().toShortString()
                    + ", dir=" + r.packageInfo.getAppDir());

            if (activity != null) {
                CharSequence title = r.activityInfo.loadLabel(appContext.getPackageManager());
                Configuration config = new Configuration(mCompatConfiguration);
                if (r.overrideConfig != null) {
                    config.updateFrom(r.overrideConfig);
                }
                if (DEBUG_CONFIGURATION) Slog.v(TAG, "Launching activity "
                        + r.activityInfo.name + " with config " + config);
                Window window = null;
                if (r.mPendingRemoveWindow != null && r.mPreserveWindow) {
                    window = r.mPendingRemoveWindow;
                    r.mPendingRemoveWindow = null;
                    r.mPendingRemoveWindowManager = null;
                }

                // Activity resources must be initialized with the same loaders as the
                // application context.
                appContext.getResources().addLoaders(
                        app.getResources().getLoaders().toArray(new ResourcesLoader[0]));

                appContext.setOuterContext(activity);
                activity.attach(appContext, this, getInstrumentation(), r.token,
                        r.ident, app, r.intent, r.activityInfo, title, r.parent,
                        r.embeddedID, r.lastNonConfigurationInstances, config,
                        r.referrer, r.voiceInteractor, window, r.configCallback,
                        r.assistToken);

                if (customIntent != null) {
                    activity.mIntent = customIntent;
                }
                r.lastNonConfigurationInstances = null;
                checkAndBlockForNetworkAccess();
                activity.mStartedActivity = false;
                int theme = r.activityInfo.getThemeResource();
                if (theme != 0) {
                    activity.setTheme(theme);
                }

                activity.mCalled = false;
                if (r.isPersistable()) {
                    mInstrumentation.callActivityOnCreate(activity, r.state, r.persistentState);
                } else {
                    mInstrumentation.callActivityOnCreate(activity, r.state);
                }
                if (!activity.mCalled) {
                    throw new SuperNotCalledException(
                        "Activity " + r.intent.getComponent().toShortString() +
                        " did not call through to super.onCreate()");
                }
                r.activity = activity;
                mLastReportedWindowingMode.put(activity.getActivityToken(),
                        config.windowConfiguration.getWindowingMode());
            }
            r.setState(ON_CREATE);

            // updatePendingActivityConfiguration() reads from mActivities to update
            // ActivityClientRecord which runs in a different thread. Protect modifications to
            // mActivities to avoid race.
            synchronized (mResourcesManager) {
                mActivities.put(r.token, r);
            }

        } catch (SuperNotCalledException e) {
            throw e;

        } catch (Exception e) {
            if (!mInstrumentation.onException(activity, e)) {
                throw new RuntimeException(
                    "Unable to start activity " + component
                    + ": " + e.toString(), e);
            }
        }

        return activity;
    }

 activity = mInstrumentation.newActivity( cl, component.getClassName(), r.intent);Instrumentation类执行类newActivity方法,我们看下Instrumentation中方法的实现

  public Activity newActivity(ClassLoader cl, String className,
            Intent intent)
            throws InstantiationException, IllegalAccessException,
            ClassNotFoundException {
        String pkg = intent != null && intent.getComponent() != null
                ? intent.getComponent().getPackageName() : null;
        return getFactory(pkg).instantiateActivity(cl, className, intent);
    }

getFactory为AppComponentFactory,我们进入其方法中看

  public @NonNull Activity instantiateActivity(@NonNull ClassLoader cl, @NonNull String className,
            @Nullable Intent intent)
            throws InstantiationException, IllegalAccessException, ClassNotFoundException {
        return (Activity) cl.loadClass(className).newInstance();
    }

可见Activity是在这里建立的。既然Activity建立了,我们回到performLaunchActivity方法中,会看到

 private Activity performLaunchActivity(ActivityClientRecord r, Intent customIntent) {
       
      ...
                appContext.setOuterContext(activity);
                activity.attach(appContext, this, getInstrumentation(), r.token,
                        r.ident, app, r.intent, r.activityInfo, title, r.parent,
                        r.embeddedID, r.lastNonConfigurationInstances, config,
                        r.referrer, r.voiceInteractor, window, r.configCallback,
                        r.assistToken);
...

                if (r.isPersistable()) {
                    mInstrumentation.callActivityOnCreate(activity, r.state, r.persistentState);
                } else {
                    mInstrumentation.callActivityOnCreate(activity, r.state);
                }
               ...

        return activity;
    }

Activity建立后,执行其attach方法,后面又通过Instrumentation执行callActivityOnCreate方法,看其实现

  public void callActivityOnCreate(Activity activity, Bundle icicle) {
        prePerformCreate(activity);
        activity.performCreate(icicle);
        postPerformCreate(activity);
    }

再看Activity的performCreate方法

  final void performCreate(Bundle icicle, PersistableBundle persistentState) {
        dispatchActivityPreCreated(icicle);
        ...     
        if (persistentState != null) {
            onCreate(icicle, persistentState);
        } else {
            onCreate(icicle);
        }
    
    }

可以看到其调用了我们熟悉的onCreate方法,这里建立了Activity和调用了attach和onCreate方法,在onCreate方法中会生成mDecorView,还未产生绘制流程,通过源码看,其绘制流程是在handleResumeActivity开始执行的,我们看下源码

public void handleResumeActivity(IBinder token, boolean finalStateRequest, boolean isForward,
            String reason) {
        // If we are getting ready to gc after going to the background, well
        // we are back active so skip it.
        unscheduleGcIdler();
        mSomeActivitiesChanged = true;

        // TODO Push resumeArgs into the activity for consideration
        final ActivityClientRecord r = performResumeActivity(token, finalStateRequest, reason);
        if (r == null) {
            // We didn't actually resume the activity, so skipping any follow-up actions.
            return;
        }
        if (mActivitiesToBeDestroyed.containsKey(token)) {
            // Although the activity is resumed, it is going to be destroyed. So the following
            // UI operations are unnecessary and also prevents exception because its token may
            // be gone that window manager cannot recognize it. All necessary cleanup actions
            // performed below will be done while handling destruction.
            return;
        }

        final Activity a = r.activity;

        if (localLOGV) {
            Slog.v(TAG, "Resume " + r + " started activity: " + a.mStartedActivity
                    + ", hideForNow: " + r.hideForNow + ", finished: " + a.mFinished);
        }

        final int forwardBit = isForward
                ? WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION : 0;

        // If the window hasn't yet been added to the window manager,
        // and this guy didn't finish itself or start another activity,
        // then go ahead and add the window.
        boolean willBeVisible = !a.mStartedActivity;
        if (!willBeVisible) {
            try {
                willBeVisible = ActivityTaskManager.getService().willActivityBeVisible(
                        a.getActivityToken());
            } catch (RemoteException e) {
                throw e.rethrowFromSystemServer();
            }
        }
        if (r.window == null && !a.mFinished && willBeVisible) {
            r.window = r.activity.getWindow();
            View decor = r.window.getDecorView();
            decor.setVisibility(View.INVISIBLE);
            ViewManager wm = a.getWindowManager();
            WindowManager.LayoutParams l = r.window.getAttributes();
            a.mDecor = decor;
            l.type = WindowManager.LayoutParams.TYPE_BASE_APPLICATION;
            l.softInputMode |= forwardBit;
            if (r.mPreserveWindow) {
                a.mWindowAdded = true;
                r.mPreserveWindow = false;
                // Normally the ViewRoot sets up callbacks with the Activity
                // in addView->ViewRootImpl#setView. If we are instead reusing
                // the decor view we have to notify the view root that the
                // callbacks may have changed.
                ViewRootImpl impl = decor.getViewRootImpl();
                if (impl != null) {
                    impl.notifyChildRebuilt();
                }
            }
            if (a.mVisibleFromClient) {
                if (!a.mWindowAdded) {
                    a.mWindowAdded = true;
                    wm.addView(decor, l);
                } else {
                    // The activity will get a callback for this {@link LayoutParams} change
                    // earlier. However, at that time the decor will not be set (this is set
                    // in this method), so no action will be taken. This call ensures the
                    // callback occurs with the decor set.
                    a.onWindowAttributesChanged(l);
                }
            }

            // If the window has already been added, but during resume
            // we started another activity, then don't yet make the
            // window visible.
        } else if (!willBeVisible) {
            if (localLOGV) Slog.v(TAG, "Launch " + r + " mStartedActivity set");
            r.hideForNow = true;
        }

        // Get rid of anything left hanging around.
        cleanUpPendingRemoveWindows(r, false /* force */);

        // The window is now visible if it has been added, we are not
        // simply finishing, and we are not starting another activity.
        if (!r.activity.mFinished && willBeVisible && r.activity.mDecor != null && !r.hideForNow) {
            if (r.newConfig != null) {
                performConfigurationChangedForActivity(r, r.newConfig);
                if (DEBUG_CONFIGURATION) {
                    Slog.v(TAG, "Resuming activity " + r.activityInfo.name + " with newConfig "
                            + r.activity.mCurrentConfig);
                }
                r.newConfig = null;
            }
            if (localLOGV) Slog.v(TAG, "Resuming " + r + " with isForward=" + isForward);
            ViewRootImpl impl = r.window.getDecorView().getViewRootImpl();
            WindowManager.LayoutParams l = impl != null
                    ? impl.mWindowAttributes : r.window.getAttributes();
            if ((l.softInputMode
                    & WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION)
                    != forwardBit) {
                l.softInputMode = (l.softInputMode
                        & (~WindowManager.LayoutParams.SOFT_INPUT_IS_FORWARD_NAVIGATION))
                        | forwardBit;
                if (r.activity.mVisibleFromClient) {
                    ViewManager wm = a.getWindowManager();
                    View decor = r.window.getDecorView();
                    wm.updateViewLayout(decor, l);
                }
            }
            r.activity.mVisibleFromServer = true;
            mNumVisibleActivities++;
            if (r.activity.mVisibleFromClient) {
                r.activity.makeVisible();
            }
        }
        r.nextIdle = mNewActivities;
        mNewActivities = r;
        if (localLOGV) Slog.v(TAG, "Scheduling idle handler for " + r);
        Looper.myQueue().addIdleHandler(new Idler());
    }

其中final ActivityClientRecord r = performResumeActivity(token, finalStateRequest, reason),我们看下performResumeActivity实现,

 public ActivityClientRecord performResumeActivity(IBinder token, boolean finalStateRequest,
            String reason) {
           ...
            r.activity.performResume(r.startsNotResumed, reason);

     
        return r;
    }

再看Activity的performResume

final void performResume(boolean followedByPause, String reason) {
        dispatchActivityPreResumed();
        performRestart(true /* start */, reason);
        ...
        // mResumed is set by the instrumentation
        mInstrumentation.callActivityOnResume(this);
 
        }

其调用了Instrumentation的callActivityOnResume方法,我们再看其实现

  public void callActivityOnResume(Activity activity) {
        activity.mResumed = true;
        activity.onResume();
        
        if (mActivityMonitors != null) {
            synchronized (mSync) {
                final int N = mActivityMonitors.size();
                for (int i=0; i<N; i++) {
                    final ActivityMonitor am = mActivityMonitors.get(i);
                    am.match(activity, activity, activity.getIntent());
                }
            }
        }
    }

可见最终Activiy调用了onResume.调用了onResume后,我们回到handleResumeActivity,可见其调用了一行wm.addView(decor, l);wm为WindowManager,其实现是WindowManagerImpl,我们看下其实现

   @Override
    public void addView(@NonNull View view, @NonNull ViewGroup.LayoutParams params) {
        applyDefaultToken(params);
        mGlobal.addView(view, params, mContext.getDisplayNoVerify(), mParentWindow,
                mContext.getUserId());
    }

可见其实现是通过代理类WindowManagerGlobal实现到,我们看下代理类是怎么实现的

public void addView(View view, ViewGroup.LayoutParams params,
            Display display, Window parentWindow, int userId) {
        if (view == null) {
            throw new IllegalArgumentException("view must not be null");
        }
        if (display == null) {
            throw new IllegalArgumentException("display must not be null");
        }
        if (!(params instanceof WindowManager.LayoutParams)) {
            throw new IllegalArgumentException("Params must be WindowManager.LayoutParams");
        }

        final WindowManager.LayoutParams wparams = (WindowManager.LayoutParams) params;
        if (parentWindow != null) {
            parentWindow.adjustLayoutParamsForSubWindow(wparams);
        } else {
            // If there's no parent, then hardware acceleration for this view is
            // set from the application's hardware acceleration setting.
            final Context context = view.getContext();
            if (context != null
                    && (context.getApplicationInfo().flags
                            & ApplicationInfo.FLAG_HARDWARE_ACCELERATED) != 0) {
                wparams.flags |= WindowManager.LayoutParams.FLAG_HARDWARE_ACCELERATED;
            }
        }

        ViewRootImpl root;
        View panelParentView = null;

        synchronized (mLock) {
            // Start watching for system property changes.
            if (mSystemPropertyUpdater == null) {
                mSystemPropertyUpdater = new Runnable() {
                    @Override public void run() {
                        synchronized (mLock) {
                            for (int i = mRoots.size() - 1; i >= 0; --i) {
                                mRoots.get(i).loadSystemProperties();
                            }
                        }
                    }
                };
                SystemProperties.addChangeCallback(mSystemPropertyUpdater);
            }

            int index = findViewLocked(view, false);
            if (index >= 0) {
                if (mDyingViews.contains(view)) {
                    // Don't wait for MSG_DIE to make it's way through root's queue.
                    mRoots.get(index).doDie();
                } else {
                    throw new IllegalStateException("View " + view
                            + " has already been added to the window manager.");
                }
                // The previous removeView() had not completed executing. Now it has.
            }

            // If this is a panel window, then find the window it is being
            // attached to for future reference.
            if (wparams.type >= WindowManager.LayoutParams.FIRST_SUB_WINDOW &&
                    wparams.type <= WindowManager.LayoutParams.LAST_SUB_WINDOW) {
                final int count = mViews.size();
                for (int i = 0; i < count; i++) {
                    if (mRoots.get(i).mWindow.asBinder() == wparams.token) {
                        panelParentView = mViews.get(i);
                    }
                }
            }

            root = new ViewRootImpl(view.getContext(), display);

            view.setLayoutParams(wparams);

            mViews.add(view);
            mRoots.add(root);
            mParams.add(wparams);

            // do this last because it fires off messages to start doing things
            try {
                root.setView(view, wparams, panelParentView, userId);
            } catch (RuntimeException e) {
                // BadTokenException or InvalidDisplayException, clean up.
                if (index >= 0) {
                    removeViewLocked(index, true);
                }
                throw e;
            }
        }
    }

可见root = new ViewRootImpl(view.getContext(), display);创建了一个ViewRootImpl的View,并且root.setView(view, wparams, panelParentView, userId)把View传入进了,我们看下setView的实现

    public void setView(View view, WindowManager.LayoutParams attrs, View panelParentView,
                        int userId) {
        synchronized (this) {
            if (mView == null) {
                mView = view;
                requestLayout();
                ...
                view.assignParent(this);
                ...
            }
        }
    }

view传入,并且调用了requsetLayout,看其实现

 @Override
    public void requestLayout() {
        if (!mHandlingLayoutInLayoutRequest) {
            checkThread();
            mLayoutRequested = true;
            scheduleTraversals();
        }
    }

先检查是否在主线程,然后执行scheduleTraversals方法

 void scheduleTraversals() {
        if (!mTraversalScheduled) {
            mTraversalScheduled = true;
            mTraversalBarrier = mHandler.getLooper().getQueue().postSyncBarrier();
            mChoreographer.postCallback(
                    Choreographer.CALLBACK_TRAVERSAL, mTraversalRunnable, null);
            notifyRendererOfFramePending();
            pokeDrawLockIfNeeded();
        }
    }

执行mChoreographer.postCallback(Choreographer.CALLBACK_TRAVERSAL, mTraversalRunnable, null);其中mTraversalRunnable为具体实现

 final class TraversalRunnable implements Runnable {
        @Override
        public void run() {
            doTraversal();
        }
    }

    void doTraversal() {
        if (mTraversalScheduled) {
            mTraversalScheduled = false;
            mHandler.getLooper().getQueue().removeSyncBarrier(mTraversalBarrier);

            if (mProfile) {
                Debug.startMethodTracing("ViewAncestor");
            }

            performTraversals();

            if (mProfile) {
                Debug.stopMethodTracing();
                mProfile = false;
            }
        }
    }

调用performTraversals方法,我们看下具体实现

private void performTraversals() {
        if (!mStopped || mReportNextDraw) {
            boolean focusChangedDueToTouchMode = ensureTouchModeLocally(
                    (relayoutResult & WindowManagerGlobal.RELAYOUT_RES_IN_TOUCH_MODE) != 0);
            if (focusChangedDueToTouchMode || mWidth != host.getMeasuredWidth()
                    || mHeight != host.getMeasuredHeight() || dispatchApplyInsets ||
                    updatedConfiguration) {
                int childWidthMeasureSpec = getRootMeasureSpec(mWidth, lp.width);
                int childHeightMeasureSpec = getRootMeasureSpec(mHeight, lp.height);

                if (DEBUG_LAYOUT) Log.v(mTag, "Ooops, something changed!  mWidth="
                        + mWidth + " measuredWidth=" + host.getMeasuredWidth()
                        + " mHeight=" + mHeight
                        + " measuredHeight=" + host.getMeasuredHeight()
                        + " dispatchApplyInsets=" + dispatchApplyInsets);

                // Ask host how big it wants to be
                performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);

                // Implementation of weights from WindowManager.LayoutParams
                // We just grow the dimensions as needed and re-measure if
                // needs be
                int width = host.getMeasuredWidth();
                int height = host.getMeasuredHeight();
                ...
                performLayout(lp, mWidth, mHeight);
                ...
                performDraw();
            }
        }
    }

里面实现很复杂,不过最终View的绘制流程measure,layout,draw都在这开始执行。

三.总结

Activity的attach方法中建立,并在onCreate方法的setContentView中生成mDecorView,在Activity执行onResume中后,WindowManager调用addView把mDecorView放入Activity中作为根View,并在addView中开始了mDecorView的measure,layout,draw绘制过程。

上一篇:安卓按键事件


下一篇:Linux驱动之中断处理体系结构简析