Deepin 设置静态 ip

Deepin 设置静态 ip

1 获取 网卡的名称

  • 打开终端输入
yang@yang:~$ ifconfig -a
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.217.82  netmask 255.255.255.0  broadcast 192.168.217.255
        inet6 fe80::2e4d:54ff:fe9b:2dc4  prefixlen 64  scopeid 0x20<link>
        ether 2c:4d:54:9b:2d:c4  txqueuelen 1000  (Ethernet)
        RX packets 2774  bytes 283691 (277.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 480  bytes 67196 (65.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 826  bytes 67458 (65.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 826  bytes 67458 (65.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  • enp3s0 网卡名称

2 添加 IP 地址

  • 在 /etc/network/interfaces 中添加内容
# 静态ip
auto enp3s0
# enp3s0 是网卡名称
iface enp3s0 inet static
# 设置 DHCP 为动态
address 192.168.217.82
# 要设置的静态 IP 地址
netmask 255.255.255.0
# 子网掩码
gateway 192.168.217.1
# 网关
dns-nameserver 119.29.29.29
# dns 地址

3 重启网络

sudo /etc/init.d/networking restart

4 如果出现 出现域名解析暂时失败

  • 打开 /etc/resolv.conf , 添加 nameserver 119.29.29.29
sudo vim /etc/resolv.conf

# 编辑文件
#i Generated by NetworkManager
nameserver 119.29.29.29
# 添加一行
  • 重启网络
sudo /etc/init.d/networking restart

4 参考

简书
csdn

上一篇:采用双线性插值算法和NCEP气象数据绘制生成气象场(温度场、湿度场、气压场)


下一篇:ROS项目总结之基于HAL STM32的ROSSERIAL通讯