vpp cmd

vpp cmd

 

 

DBGvpp# sh inter addr
UnknownEthernet5/0/0 (up):
  L3 192.168.1.229/24
host-ns1_tap (up):
local0 (dn):
DBGvpp# nat44 add interface address  UnknownEthernet5/0/0
DBGvpp# 
DBGvpp# create bridge-domain 1
bridge-domain 1

DBGvpp# set interface l2 bridge host-ns1_tap 1
DBGvpp# set interface l2 bridge UnknownEthernet5/0/0 1
DBGvpp# 
DBGvpp# ip route add 192.168.1.0/24 via UnknownEthernet5/0/0
DBGvpp# 

 

 

 

[root@localhost vpp2]# ./extras/vpp_config/scripts/dpdk-devbind.py --status

Network devices using DPDK-compatible driver
============================================
<none>

Network devices using kernel driver
===================================
0000:05:00.0 'Hi1822 Family (2*25GE)' if= drv=vfio-pci unused=hinic 
0000:06:00.0 'Hi1822 Family (2*25GE)' if= drv=vfio-pci unused=hinic 
0000:7d:00.0 'HNS GE/10GE/25GE RDMA Network Controller' if=enp125s0f0 drv=hns3 unused=hns_roce_hw_v2 
0000:7d:00.1 'HNS GE/10GE/25GE Network Controller' if=enp125s0f1 drv=hns3 unused= 
0000:7d:00.2 'HNS GE/10GE/25GE RDMA Network Controller' if=enp125s0f2 drv=hns3 unused=hns_roce_hw_v2 
0000:7d:00.3 'HNS GE/10GE/25GE Network Controller' if=enp125s0f3 drv=hns3 unused= 

Other network devices
=====================
<none>

Crypto devices using DPDK-compatible driver
===========================================
<none>

Crypto devices using kernel driver
==================================
<none>

Other crypto devices
====================
<none>
delete loopback interface intfc <interface>.

 

Example Usage
Example of how to configure a Layer 2 bridge-domain with three interfaces (where 200 is the bridge-domain-id):

vpp# set interface l2 bridge GigabitEthernet0/8/0.200 200
This interface is added a BVI interface:

vpp# set interface l2 bridge GigabitEthernet0/9/0.200 200 bvi
This interface also has a split-horizon group of 1 specified:

vpp# set interface l2 bridge GigabitEthernet0/a/0.200 200 1
Example of how to remove an interface from a Layer2 bridge-domain:

vpp# set interface l3 GigabitEthernet0/a/0.200

 

DBGvpp# set int ip address del  loop0 192.168.1.229/24
DBGvpp# set int ip address   UnknownEthernet5/0/0 192.168.1.229/24
DBGvpp#

 

 

 

 

 

 

https://peiyake.com.cn/part1/vpp/l2_bridge

上一篇:线性表的链式存储(python实现)


下一篇:hw-tc-offload