linux新增磁盘-LVM分区

为已存在的一台虚拟机,增加了一块磁盘。使用LVM进行卷管理。

查看磁盘

[root@localhost ~]# fdisk -l

Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000249db

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     1026047      512000   83  Linux
/dev/sda2         1026048   152391679    75682816   83  Linux
/dev/sda3       152391680   173363199    10485760   83  Linux
/dev/sda4       173363200   209715199    18176000    5  Extended
/dev/sda5       173367296   194338815    10485760   83  Linux
/dev/sda6       194340864   198537215     2098176   82  Linux swap / Solaris

Disk /dev/sdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

由上面的结果可知,有两块物理磁盘,分别为/dev/sda/dev/sdb。其中/dev/sdb是新增的磁盘。

新磁盘分区

/dev/sdb进行分区,并格式化为LVM所需的格式。

[root@localhost ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x1ed31cb8.

Command (m for help): m
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   g   create a new empty GPT partition table
   G   create an IRIX (SGI) partition table
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

Command (m for help): d
No partition is defined yet!

Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-20971519, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-20971519, default 20971519):
Using default value 20971519
Partition 1 of type Linux and of size 10 GiB is set

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): L

 0  Empty           24  NEC DOS         81  Minix / old Lin bf  Solaris
 1  FAT12           27  Hidden NTFS Win 82  Linux swap / So c1  DRDOS/sec (FAT-
 2  XENIX root      39  Plan 9          83  Linux           c4  DRDOS/sec (FAT-
 3  XENIX usr       3c  PartitionMagic  84  OS/2 hidden C:  c6  DRDOS/sec (FAT-
 4  FAT16 <32M      40  Venix 80286     85  Linux extended  c7  Syrinx
 5  Extended        41  PPC PReP Boot   86  NTFS volume set da  Non-FS data
 6  FAT16           42  SFS             87  NTFS volume set db  CP/M / CTOS / .
 7  HPFS/NTFS/exFAT 4d  QNX4.x          88  Linux plaintext de  Dell Utility
 8  AIX             4e  QNX4.x 2nd part 8e  Linux LVM       df  BootIt
 9  AIX bootable    4f  QNX4.x 3rd part 93  Amoeba          e1  DOS access
 a  OS/2 Boot Manag 50  OnTrack DM      94  Amoeba BBT      e3  DOS R/O
 b  W95 FAT32       51  OnTrack DM6 Aux 9f  BSD/OS          e4  SpeedStor
 c  W95 FAT32 (LBA) 52  CP/M            a0  IBM Thinkpad hi eb  BeOS fs
 e  W95 FAT16 (LBA) 53  OnTrack DM6 Aux a5  FreeBSD         ee  GPT
 f  W95 Ext'd (LBA) 54  OnTrackDM6      a6  OpenBSD         ef  EFI (FAT-12/16/
10  OPUS            55  EZ-Drive        a7  NeXTSTEP        f0  Linux/PA-RISC b
11  Hidden FAT12    56  Golden Bow      a8  Darwin UFS      f1  SpeedStor
12  Compaq diagnost 5c  Priam Edisk     a9  NetBSD          f4  SpeedStor
14  Hidden FAT16 <3 61  SpeedStor       ab  Darwin boot     f2  DOS secondary
16  Hidden FAT16    63  GNU HURD or Sys af  HFS / HFS+      fb  VMware VMFS
17  Hidden HPFS/NTF 64  Novell Netware  b7  BSDI fs         fc  VMware VMKCORE
18  AST SmartSleep  65  Novell Netware  b8  BSDI swap       fd  Linux raid auto
1b  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid fe  LANstep
1c  Hidden W95 FAT3 75  PC/IX           be  Solaris boot    ff  BBT
1e  Hidden W95 FAT1 80  Old Minix
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): p

Disk /dev/sdb: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x1ed31cb8

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    20971519    10484736   8e  Linux LVM

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

创建卷并挂载

## 新建物理卷
[root@localhost ~]# pvcreate /dev/sdb1
  Physical volume "/dev/sdb1" successfully created.

## 新建卷组
[root@localhost ~]# vgcreate disk2 /dev/sdb1
  Volume group "disk2" successfully created

## 新建逻辑卷
[root@localhost ~]# lvcreate -L 2G -n lv01 disk2
  Logical volume "lv01" created.

## 查看逻辑卷
[root@localhost ~]# lvdisplay
  --- Logical volume ---
  LV Path                /dev/disk2/lv01
  LV Name                lv01
  VG Name                disk2
  LV UUID                vlQhP4-uLjG-WX30-nSTd-WbI3-2B9f-pMNZ7i
  LV Write Access        read/write
  LV Creation host, time localhost, 2021-06-26 06:51:31 -0400
  LV Status              available
  # open                 0
  LV Size                2.00 GiB
  Current LE             512
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:0

## 格式化逻辑卷
[root@localhost ~]# mkfs.ext4 /dev/disk2/lv01
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 524288 blocks
26214 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
16 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

## 创建挂载点目录
mkdir /lv01

## 编辑/etc/fstab,加入新增卷挂载配置。文件最后一行加入如下内容:
/dev/disk2/lv01 /lv01 ext4 defaults 0 0

## 挂载
mount -a

## 查看磁盘挂载信息
[root@localhost ~]# df -hT
Filesystem             Type      Size  Used Avail Use% Mounted on
/dev/sda3              xfs        10G  1.1G  9.0G  11% /
devtmpfs               devtmpfs  488M     0  488M   0% /dev
tmpfs                  tmpfs     497M     0  497M   0% /dev/shm
tmpfs                  tmpfs     497M  6.6M  490M   2% /run
tmpfs                  tmpfs     497M     0  497M   0% /sys/fs/cgroup
/dev/sda5              xfs        10G   33M   10G   1% /home
/dev/sda2              ext4       71G   53M   68G   1% /data
/dev/sda1              xfs       497M  118M  379M  24% /boot
tmpfs                  tmpfs     100M     0  100M   0% /run/user/0
/dev/mapper/disk2-lv01 ext4      2.0G  6.0M  1.8G   1% /lv01
上一篇:mysql分区与分表


下一篇:Kafka整体架构、工作流程与文件存储机制