ubuntu-18.04不能像ubuntu14一样通过编辑rc.local来设置开机启动脚本
可以通过下列简单设置后，可以使rc.local重新发挥作用。
1、建立rc-local.service文件
sudo vi /etc/systemd/system/rc-local.service
2、将下列内容复制进rc-local.service文件
[Unit]
Description=/etc/rc.local Compatibility
ConditionPathExists=/etc/rc.local
[Service]Type=forkingExecStart=/etc/rc.local start
TimeoutSec=0StandardOutput=tty
RemainAfterExit=yes
SysVStartPriority=99[Install]WantedBy=multi-user.target3、创建文件rc.local
sudo vi /etc/rc.local
4、将下列内容复制进rc.local文件
#!/bin/sh -e
## rc.local## This script is executed at the end of each multiuser runlevel.# Make sure that the script will "exit 0" on success or any other# value on error.## In order to enable or disable this script just change the execution# bits.## By default this script does nothing.echo "看到这行字，说明添加自启动脚本成功。" > /usr/local/test.log
exit 0
5、给rc.local加上权限
sudo chmod +x /etc/rc.local
6、启用服务
sudo systemctl enable rc-local
7、启动服务并检查状态
sudo systemctl start rc-local.service
sudo systemctl status rc-local.service
8、重启并检查test.log文件
cat /usr/local/test.log
如果能看到内容，说明设置成功，你就可以通过编辑rc.local文件来设置启动脚本了