一、主机准备
1、硬件
准备5台2C/2g/50g虚拟机；
Centos7.6系统
2、集群规划
使用10.4.7.0/24网络
IP 主机名
10.4.7.11 hdss7-11.host.com
10.4.7.12 hdss7-12.host.com
10.4.7.21 hdss7-21.host.com
10.4.7.22 hdss7-22.host.com
10.4.7.200 hdss7-200.host.com
10.4.7.10 21/22的虚拟VIP
二、操作系统优化
1、可以ping通外网
[root@hdss7-11 ~]# ping baidu.com
PING baidu.com (39.156.69.79) 56(84) bytes of data.
64 bytes from 39.156.69.79 (39.156.69.79): icmp_seq=1 ttl=53 time=9.59 ms
2、关闭防火墙与SElinux
[root@hdss7-11 ~]# sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
[root@hdss7-11 ~]# setenforce 0
[root@hdss7-11 ~]# getenforce
Disabled
3、查看内核
要求在3.10以上，docker使用
[root@hdss7-11 ~]# uname -a
Linux hdss7-11.host.com 3.10.0-1062.el7.x86_64 #1 SMP Wed Aug 7 18:08:02 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
4、配置yum源
[root@hdss7-11 ~]# yum -y isntall vim telnet wget
安装yum源于eple源
[root@hdss7-11 ~]# cd /etc/yum.repos.d/
[root@hdss7-11 ~]# mkdir bak
[root@hdss7-11 ~]# mv * bak/
安装网易的yum源及eple源
[root@hdss7-11 ~]# wget http://mirrors.163.com/.help/CentOS7-Base-163.repo
[root@hdss7-11 ~]# yum list
[root@hdss7-11 ~]# yum -y install eple-release
安装阿里云的
[root@hdss7-11 ~]# wget http://mirrors.aliyun.com/repo/Centos-7.repo
[root@hdss7-11 ~]# wget -O /etc/yum.repos.d/epel-7.repo http://mirrors.aliyun.com/repo/epel-7.repo
[root@hdss7-11 ~]# yum clean all
[root@hdss7-11 ~]# yum makecache
5、安装必要工具软件
[root@hdss7-11 ~]# yum -y install wget net-tools tree nmap sysstat lrzsz dos2unix bind-utils
三、设置VIP
在21/22主机上操作
1、安装keepalived
实验环境直接使用yum安装
[root@hdss7-21 ~]# yum -y install keepalived
2、修改配置文件
10.4.7.21上
[root@hdss7-21 ~]# vim /etc/keepalived/keepalived.conf
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.4.7.10
}
}
10.4.7.22上
[root@hdss7-21 ~]# vim /etc/keepalived/keepalived.conf
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 51
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.4.7.10
}
}
3、加入开机自启
[root@hdss7-21 ~]# systemctl start keepalived && systemctl enable keepalived
Created symlink from /etc/systemd/system/multi-user.target.wants/keepalived.service to /usr/lib/systemd/system/keepalived.service.
4、查看VIP
[root@hdss7-21 ~]# ip a
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:e3:96:b1 brd ff:ff:ff:ff:ff:ff
inet 10.4.7.21/24 brd 10.4.7.255 scope global noprefixroute ens33
valid_lft forever preferred_lft forever
inet 10.4.7.10/32 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::e4c6:edb7:e158:d84b/64 scope link tentative noprefixroute dadfailed
valid_lft forever preferred_lft forever
inet6 fe80::66c4:334d:3cb1:9096/64 scope link tentative noprefixroute dadfailed
valid_lft forever preferred_lft forever
inet6 fe80::32e0:c391:471a:d3c3/64 scope link noprefixroute
valid_lft forever preferred_lft forever
四、部署DNS系统
我们要对集群进行7层的流量调度，所以需要部署自己的DNS环境，方便进行域名解析
在10.4.7.11上进行部署操作
1、安装bind
[root@hdss7-11 ~]# yum -y install bind
[root@hdss7-11 ~]# rpm -qa bind
bind-9.11.4-26.P2.el7_9.5.x86_64
2、配置主配置文件
[root@hdss7-11 ~]# vim /etc/named.conf
options {
listen-on port 53 { 10.4.7.11; };
// listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
recursing-file "/var/named/data/named.recursing";
secroots-file "/var/named/data/named.secroots";
allow-query { any; };
forwarders { 10.4.7.1; };
dnssec-enable no;
dnssec-validation no;
检查，无报错就ok
[root@hdss7-11 ~]# named-checkconf
3、配置区域配置文件（配置主机域、业务域）
[root@hdss7-11 ~]# vim /etc/named.rfc1912.zones
zone "host.com" IN {
type master;
file "host.com.zone";
allow-update { 10.4.7.11; };
};
zone "od.com" IN {
type master;
file "od.com.zone";
allow-update { 10.4.7.11; };
};
4、配置区域数据文件
[root@hdss7-11 ~]# vim /var/named/host.com.zone
$ORIGIN host.com.
$TTL 600 ; 10 minute
@ IN SOA dns.host.com. dnsadmin.host.com. (
2020010501 ; serial
10800 ; refresh (3 hours) # soa参数
900 ; retry (15 minutes)
604800 ; expire (1 week)
86400 ; minimum (1 day)
)
NS dns.host.com.
$TTL 60 ; 1 minute
dns A 10.4.7.11
HDSS7-11 A 10.4.7.11
HDSS7-12 A 10.4.7.12
HDSS7-21 A 10.4.7.21
HDSS7-22 A 10.4.7.22
HDSS7-200 A 10.4.7.200
5、配置业务域数据文件
[root@hdss7-11 ~]# vim /var/named/od.com.zone
$ORIGIN od.com.
$TTL 600 ; 10 minutes
@ IN SOA dns.od.com. dnsadmin.od.com. (
2020010501 ; serial
10800 ; refresh (3 hours)
900 ; retry (15 minutes)
604800 ; expire (1 week)
86400 ; minimum (1 day)
)
NS dns.od.com.
$TTL 60 ; 1 minute
dns A 10.4.7.11
6、启动测试
[root@hdss7-11 ~]# named-checkconf
启动服务
[root@hdss7-11 ~]# systemctl start named && systemctl enable named
测试解析
[root@hdss7-11 ~]# dig -t A hdss7-11.host.com @10.4.7.11 +shor
10.4.7.11
[root@hdss7-11 ~]# dig -t A hdss7-200.host.com @10.4.7.11 +shor
10.4.7.200
7、修改所有主机DNS
[root@hdss7-11 ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
DNS1=10.4.7.11
[root@hdss7-11 ~]# systemctl restart network
[root@hdss7-11 ~]# ping baidu.com
PING baidu.com (39.156.69.79) 56(84) bytes of data.
64 bytes from 39.156.69.79 (39.156.69.79): icmp_seq=1 ttl=53 time=22.7 ms
[root@hdss7-11 ~]# ping hdss7-21.host.com
PING HDSS7-21.host.com (10.4.7.21) 56(84) bytes of data.
64 bytes from 10.4.7.21 (10.4.7.21): icmp_seq=1 ttl=64 time=2.24 ms
走的是内网DNS
修改宿主机DNS
7、修改resolv.conf
添加后解析主机A记录 可以不加域名 例如 dig -t A hdss7-11
[root@hdss7-11 ~]# vim /etc/resolv.conf
# Generated by NetworkManager
search host.com
nameserver 10.4.7.11
[root@hdss7-11 ~]# ping hdss7-200
PING HDSS7-200.host.com (10.4.7.200) 56(84) bytes of data.
64 bytes from 10.4.7.200 (10.4.7.200): icmp_seq=1 ttl=64 time=10.1 ms
五、准备自签证书环境
签发证书有两种方法：openssl和cfssl
本例使用cfssl证书，在10.4.7.200上部署
10.4.7.200主机上部署，使用cfssl证书
1、下载cfssl工具
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -O /usr/local/bin/cfssl
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -O /usr/local/bin/cfssl-json
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -O /usr/local/bin/cfssl-certinfo
[root@hdss7-200 ~]# chmod +x /usr/local/bin/cfssl*
[root@hdss7-200 ~]# which cfssl
/usr/local/bin/cfssl
[root@hdss7-200 ~]# which cfssl-json
/usr/local/bin/cfssl-json
[root@hdss7-200 ~]# which cfssl-certinfo
/usr/local/bin/cfssl-certinfo
2、签发根证书
[root@hdss7-200 ~]# mkdir /opt/certs/ ; cd /opt/certs/
创建生成CA证书签名请求的（csr）JSON配置文件
[root@hdss7-200 certs]# vim /opt/certs/ca-csr.json
{
"CN": "OldboyEdu",
"hosts": [
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "beijing",
"L": "beijing",
"O": "od",
"OU": "ops"
}
],
"ca": {
"expiry": "175200h"
}
}
说明：
CN: Common Name ,浏览器使用该字段验证网站是否合法, 一般写的是域名。非常重要。浏览器使
用该字段验证网站是否合法C: Country,国家ST:State,州，省L: Locality ,地区,城市O: Organization Name ,组织名称,公司名称OU: Organization Unit Name ,组织单位名称,公司部门；
"expiry": 证书有效时间，默认是一年
3、生成CA证书和私钥
[root@hdss7-200 certs]# cfssl gencert -initca ca-csr.json | cfssl-json -bare ca
2021/06/01 23:10:34 [INFO] generating a new CA key and certificate from CSR
2021/06/01 23:10:34 [INFO] generate received request
2021/06/01 23:10:34 [INFO] received CSR
2021/06/01 23:10:34 [INFO] generating key: rsa-2048
2021/06/01 23:10:34 [INFO] encoded CSR
2021/06/01 23:10:34 [INFO] signed certificate with serial number 12748630169764283939229873301851730667516456874
[root@hdss7-200 certs]# ls
ca.csr ca-csr.json ca-key.pem ca.pem
ca-key.pem是ca证书的私钥
ca.pem是ca证书的公钥
4、问题排查
关于未生成证书，过程中无任何报错的问题:
如果所有配置都没有问题，如上所示，生成过程无异常，显示成功，却没有找到证书，那么最大的可能就是wget的时候下载的工具有问题，删除后重新下载，再不济就先下载再重新命名移动到对应路径后再重新使用命令生成就可以了，如下所示：
[root@hdss7-200 certs]# ls -l ca*
-rw-r--r-- 1 root root 328 6月 1 23:10 ca-csr.json
[root@hdss7-200 certs]# cfssl gencert -initca ca-csr.json | cfssl-json -bare ca
2021/06/02 22:03:40 [INFO] generating a new CA key and certificate from CSR
2021/06/02 22:03:40 [INFO] generate received request
2021/06/02 22:03:40 [INFO] received CSR
2021/06/02 22:03:40 [INFO] generating key: rsa-2048
2021/06/02 22:03:40 [INFO] encoded CSR
2021/06/02 22:03:40 [INFO] signed certificate with serial number 490755025334259446132565112154920848798661768876
六、安装部署Dokcer环境
在10.4.7.21/22/200上安装，此处以21为例
1、下载docker的yum源（aliyun的）
[root@hdss7-21 ~]# wget -O /etc/yum.repos.d/docker-ce.repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
2、安装docker-ce
[root@hdss7-21 ~]# yum install -y docker-ce
[root@hdss7-21 ~]# mkdir /etc/docker/
[root@hdss7-21 ~]# vim /etc/docker/daemon.json
注意bip处22和200主机分别改成22和200的网段
{
"graph": "/data/docker",
"storage-driver": "overlay2",
"insecure-registries": ["registry.access.redhat.com","quay.io","harbor.od.com"],
"registry-mirrors": ["https://registry.docker-cn.com"],
"bip": "172.7.21.1/24",
"exec-opts": ["native.cgroupdriver=systemd"],
"live-restore": true
}
3、创建数据目录
[root@hdss7-21 ~]# mkdir -p /data/docker
4、启动测试
[root@hdss7-21 ~]# systemctl start docker && systemctl enable docker
[root@hdss7-21 ~]# systemctl status docker
[root@hdss7-21 ~]# docker version
Client: Docker Engine - Community
Version: 20.10.6
七、部署Harbor仓库
在10.4.7.200上部署
官方地址：https://goharbor.io/
下载地址：https://github.com/goharbor/harbor/releases
注意 不要选择1.7.5以下版本 有漏洞
下载的时候下载harbor-offline-installer-vx.x.x.tgz版本（离线安装版本）
1、下载harbor
[root@hdss7-200 ~]# mkdir /opt/src && cd /opt/src
[root@hdss7-200 src]# wget https://github.com/goharbor/harbor/releases/download/v1.8.5/harbor-offline-installer-v1.8.5.tgz
[root@hdss7-200 src]# tar -zxvf harbor-offline-installer-v1.8.5.tgz
[root@hdss7-200 src]# mv harbor /opt/harbor-v1.8.5
[root@hdss7-200 src]# ln -s /opt/harbor-v1.8.5 /opt/harbor
2、修改harbor配置文件
实验环境只需要修改以下配置，生产环境还需要修改密码等配置
[root@hdss7-200 src]# vim /opt/harbor/harbor.yml
hostname: harbor.od.com
http:
port: 180
data_volume: /data/harbor
location: /data/harbor/logs
3、安装docker-compose
[root@hdss7-200 src]# yum -y install docker-compose
4、安装harbor
[root@hdss7-200 src]# cd /opt/harbor
[root@hdss7-200 harbor]# ./install.sh
✔ ----Harbor has been installed and started successfully.----
[root@hdss7-200 harbor]# docker-compose ps
Name Command State Ports
-----------------------------------------------------------------------------------------------
harbor-core /harbor/start.sh Up
harbor-db /entrypoint.sh postgres Up 5432/tcp
harbor-jobservice /harbor/start.sh Up
harbor-log /bin/sh -c /usr/local/bin/ ... Up 127.0.0.1:1514->10514/tcp
harbor-portal nginx -g daemon off; Up 80/tcp
nginx nginx -g daemon off; Up 0.0.0.0:180->80/tcp,:::180->80/tcp
redis docker-entrypoint.sh redis ... Up 6379/tcp
registry /entrypoint.sh /etc/regist ... Up 5000/tcp
registryctl /harbor/start.sh Up
5、设置harbor开机自启
添加如下内容
[root@hdss7-200 harbor]# vim /etc/rc.d/rc.local
# start harbor
cd /opt/harbor
/usr/docker-compose stop
/usr/docker-compose start
6、安装nginx，反向代理harbor
10.4.7.200上操作
当前机器中nginx功能较少，使用yum安装节课。如果有多个harbor则需要考虑源码安装
[root@hdss7-200 harbor]# yum -y install nginx
[root@hdss7-200 harbor]# vim /etc/nginx/conf.d/harbor.conf
server {
listen 80;
server_name harbor.od.com;
# 避免出现上传失败的情况
client_max_body_size 1000m;
location / {
proxy_pass http://127.0.0.1:180;
}
}
[root@hdss7-200 harbor]# nginx -t
[root@hdss7-200 harbor]# systemctl start nginx && systemctl enable nginx
7、配置DNS解析
在10.4.7.11上操作（注意序列号增加）
[root@hdss7-11 ~]## vim /var/named/od.com.zone
$ORIGIN od.com.
$TTL 600 ; 10 minutes
@ IN SOA dns.od.com. dnsadmin.od.com. (
2020010502 ; serial
10800 ; refresh (3 hours)
900 ; retry (15 minutes)
604800 ; expire (1 week)
86400 ; minimum (1 day)
)
NS dns.od.com.
$TTL 60 ; 1 minute
dns A 10.4.7.11
harbor A 10.4.7.200
Reload无法使配置生效，需要重启named服务
[root@hdss7-11 ~]# systemctl restart named.service
8、检查DNS生效
[root@hdss7-11 ~]# host harbor.od.com
harbor.od.com has address 10.4.7.200
9、访问harbor
在本地windows*问自建的harbor
http://harbor.od.com/
默认用户名admin
默认密码Harbor12345
新建一个公开的项目
10、测试harbor
[root@hdss7-200 ~]# docker pull nginx:1.7.9
[root@hdss7-200 ~]# docker images|grep nginx
goharbor/nginx-photon v1.8.5 aa935743d903 19 months ago 37MB
nginx 1.7.9 84581e99d807 6 years ago 91.7MB
打标签
[root@hdss7-200 ~]# docker tag nginx:1.7.9 harbor.od.com/public/nginx:v1.7.9
[root@hdss7-200 ~]# docker images|grep nginx
goharbor/nginx-photon v1.8.5 aa935743d903 19 months ago 37MB
nginx 1.7.9 84581e99d807 6 years ago 91.7MB
harbor.od.com/public/nginx v1.7.9 84581e99d807 6 years ago 91.7MB
登录harbor仓库（不登录默认连接的都是公网的docker仓库地址）
[root@hdss7-200 ~]# docker login -u admin harbor.od.com
Password:
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store
推送镜像
[root@hdss7-200 ~]# docker push harbor.od.com/public/nginx:v1.7.9
退出harbor仓库
[root@hdss7-200 ~]# docker logout
去服务器上查看
11、制作一个curl镜像
制作有curl命令的nginx容器镜像
在10.4.7.200上操作，之前pull过nginx镜像
~]# docker images|grep nginx
goharbor/nginx-photon v1.8.5 aa935743d903 19 months ago 37MB
harbor.od.com/public/nginx v1.7.9 84581e99d807 6 years ago 91.7MB
nginx 1.7.9 84581e99d807 6 years ago 91.7MB
创建一个nginx容器
root@cc8ae2b47946:/# tee /etc/apt/sources.list << EOF
deb http://mirrors.163.com/debian/ jessie main non-free contrib
deb http://mirrors.163.com/debian/ jessie-updates main non-free contrib
EOF
root@cc8ae2b47946:/# apt-get update && apt-get install curl -y
尝试curl百度首页
root@cc8ae2b47946:/# curl -k https://www.baidu.com
不要退出容器，打开另外一个终端，用此容器生成镜像
[root@hdss7-200 ~]# docker ps|grep nginx
cc8ae2b47946 nginx:1.7.9 "bash" 25 minutes ago Up 25 minutes 80/tcp, 443/tcp wizardly_jennings
~]# docker commit -p cc8ae2b47946 harbor.od.com/public/nginx:curl
sha256:734f6052b94d226f0f42a9f06aba02b4a0bec706ca64522378f775204804e64e
~]# docker push harbor.od.com/public/nginx:curl
在harbor仓库中可以查看到新推送的镜像，就可以退出容器了
12、报错排查Harbor
网关502错误
当你登录时发现密码和用户都正确，却提示错误，尝试用docker登录，提示以下错误
[root@hdss7-200 ~]# docker login -u admin harbor.od.com
Password:
Error response from daemon: login attempt to http://harbor.od.com/v2/ failed with status: 502 Bad Gateway
切换到对应目录，查看是否所有的docker容器正常运行
src]# cd /opt/harbor
harbor]# ls
common docker-compose.yml harbor.v1.8.5.tar.gz harbor.yml install.sh LICENSE prepare
如下，发现有些容器未能正常启动
harbor]# docker-compose ps
Name Command State Ports
-----------------------------------------------------------------------------------------
harbor-core /harbor/start.sh Up
harbor-db /entrypoint.sh postgres Exit 255
harbor-jobservice /harbor/start.sh Exit 255
harbor-log /bin/sh -c /usr/local/bin/ ... Up 127.0.0.1:1514->10514/tcp
harbor-portal nginx -g daemon off; Up 80/tcp
nginx nginx -g daemon off; Exit 255
redis docker-entrypoint.sh redis ... Exit 255
registry /entrypoint.sh /etc/regist ... Exit 255
registryctl /harbor/start.sh Up
此时只需要重启一下容器集群就行
harbor]# docker-compose stop
Stopping harbor-portal ... done
Stopping harbor-core ... done
Stopping registryctl ... done
Stopping harbor-log ... done
harbor]# docker-compose ps
Name Command State Ports
---------------------------------------------------------------------
harbor-core /harbor/start.sh Exit 137
harbor-db /entrypoint.sh postgres Exit 255
harbor-jobservice /harbor/start.sh Exit 255
harbor-log /bin/sh -c /usr/local/bin/ ... Exit 137
harbor-portal nginx -g daemon off; Exit 0
nginx nginx -g daemon off; Exit 255
redis docker-entrypoint.sh redis ... Exit 255
registry /entrypoint.sh /etc/regist ... Exit 255
registryctl /harbor/start.sh Exit 137
harbor]# docker-compose start
Starting log ... done
Starting registry ... done
Starting registryctl ... done
Starting postgresql ... done
Starting core ... done
Starting portal ... done
Starting redis ... done
Starting jobservice ... done
Starting proxy ... done
harbor]# docker-compose ps
Name Command State Ports
-----------------------------------------------------------------------------------------------
harbor-core /harbor/start.sh Up
harbor-db /entrypoint.sh postgres Up 5432/tcp
harbor-jobservice /harbor/start.sh Up
harbor-log /bin/sh -c /usr/local/bin/ ... Up 127.0.0.1:1514->10514/tcp
harbor-portal nginx -g daemon off; Up 80/tcp
nginx nginx -g daemon off; Up 0.0.0.0:180->80/tcp,:::180->80/tcp
redis docker-entrypoint.sh redis ... Up 6379/tcp
registry /entrypoint.sh /etc/regist ... Up 5000/tcp
registryctl /harbor/start.sh Up
尝试登录，没有问题
harbor]# docker login -u admin harbor.od.com
Password:
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store
Login Succeeded
~]# docker logout
页面平台登录也正常
也有可能是nginx代理问题，具体参考如下文档
今日排错---harbor无法登陆failed with status: 502 Bad Gateway - 骁珺在努力 - 博客园 https://www.cnblogs.com/i-xiaojun/p/14763350.html