在kubernetes集群里集成Apollo配置中心(6)之实战使用apollo分环境管理dubbo服务

2024-01-05 09:15:58

生产实践

1.迭代新需求/修复BUG(编码--->提git)

2.测试环境发版，测试(应用通过编译打包发布至test命名空间)

3.测试通过，上线(应用镜像直接发布至prod命名空间)

系统架构

(1)物理架构

主机名	角色	IP地址
mfyxw10.mfyxw.com	zk-test(测试环境Test)	192.168.80.10
mfyxw20.mfyxw.com	zk-prod(生产环境prod)	192.168.80.20
mfyxw30.mfyxw.com	kubernetes运算节点	192.168.80.30
mfyxw40.mfyxw.com	kubernetes运算节点	192.168.80.40
mfyxw50.mfyxw.com	运维主机，harbor仓库	192.168.80.50

(2)K8S内系统架构

环境	命名空间	应用
测试环境(TEST)	test	apollo-config, apollo-admin
测试环境(TEST)	test	dubbo-demo-service, dubbo-demo-web
生产环境(PROD)	prod	apollo-config, apollo-admin
生产环境(PROD)	prod	dubbo-demo-service, dubbo-demo-web
OPS环境(infra)	infra	jenkins, dubbo-monitor, apollo-portal

注意：Apollo分环境的原则：

1.要使用Apollo的话，portal服务可以在各环境*用一套

2.adminservice和configservice每个环境都需要部署一套并且数据库都不相同

3.在分环境之前，已经创建过portal、adminservice、configservice，都建议删除或使用dashboard，将设置为0，如果没有创建过，则此点可以忽略

1.添加域名解析

在mfyxw10.mfyxw.com主机上操作

(1)添加DNS域名解析

[root@mfyxw10 ~]# cat > /var/named/od.com.zone << EOF
\$ORIGIN od.com.
\$TTL 600   ; 10 minutes
@       IN  SOA dns.od.com.   dnsadmin.od.com. (
                             ;序号请加1，表示比之前版本要新
                             2020031313 ; serial
                             10800          ; refresh (3 hours)
                             900              ; retry (15 minutes)
                             604800         ; expire (1 week)
                             86400          ; minimum (1 day)
                              )
                      NS   dns.od.com.
\$TTL 60 ;  1 minute
dns             A          192.168.80.10
harbor          A          192.168.80.50   ;添加harbor记录
k8s-yaml        A          192.168.80.50
traefik         A          192.168.80.100
dashboard       A          192.168.80.100
zk1             A          192.168.80.10
zk2             A          192.168.80.20
zk3             A          192.168.80.30
jenkins         A          192.168.80.100
dubbo-monitor   A          192.168.80.100
demo            A          192.168.80.100
mysql           A          192.168.80.10
config          A          192.168.80.100
portal          A          192.168.80.100
zk-test         A          192.168.80.10
zk-prod         A          192.168.80.20
config-test     A          192.168.80.100
config-prod     A          192.168.80.100
demo-test       A          192.168.80.100
demo-prod       A          192.168.80.100
EOF

(2)重启DNS服务

[root@mfyxw10 ~]# systemctl restart named

(3)测试域名解析

[root@mfyxw10 ~]# dig -t A config-test.od.com @192.168.80.10 +short
192.168.80.100
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A config-test.od.com @192.168.80.10 +short
192.168.80.100
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A config-prod.od.com @192.168.80.10 +short
192.168.80.100
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A zk-test.od.com @192.168.80.10 +short
192.168.80.10
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A zk-prod.od.com @192.168.80.10 +short
192.168.80.20
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A demo-test.od.com @192.168.80.10 +short
192.168.80.100
[root@mfyxw10 ~]# 
[root@mfyxw10 ~]# dig -t A demo-prod.od.com @192.168.80.10 +short
192.168.80.100

2.在k8s集群中创建名称空间以及连接私有仓库的secret

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台执行即可

(1)在k8s集群中创建名称空间

[root@mfyxw30 ~]# kubectl create namespace test
namespace/test created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl create namespace prod
namespace/prod created

(2)创建secret

[root@mfyxw30 ~]# kubectl create secret docker-registry harbor --docker-server=harbor.od.com --docker-username=admin --docker-password=Harbor12345 -n test
secret/harbor created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl create secret docker-registry harbor --docker-server=harbor.od.com --docker-username=admin --docker-password=Harbor12345 -n prod
secret/harbor created

3.我原环境已部署过portal,adminservice,configservice，我将先删除

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台执行即可

[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-w9tzw   1/1     Running   0          4m51s
apollo-configservice-5f6555448-bcx22   1/1     Running   0          4m43s
apollo-portal-57bc86966d-4w5ld         1/1     Running   0          4m59s
dubbo-monitor-6676dd74cc-9hghb         1/1     Running   22         20d
dubbo-monitor-6676dd74cc-rd86g         1/1     Running   21         20d
jenkins-b99776c69-49dnr                1/1     Running   2          44h
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl delete -f http://k8s-yaml.od.com/apollo-adminservice/deployment.yaml
deployment.extensions "apollo-adminservice" deleted
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl delete -f http://k8s-yaml.od.com/apollo-configservice/deployment.yaml
deployment.extensions "apollo-configservice" deleted
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl delete -f http://k8s-yaml.od.com/apollo-portal/deployment.yaml
deployment.extensions "apollo-portal" deleted
[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                             READY   STATUS    RESTARTS   AGE
dubbo-monitor-6676dd74cc-9hghb   1/1     Running   22         20d
dubbo-monitor-6676dd74cc-rd86g   1/1     Running   21         20d
jenkins-b99776c69-49dnr          1/1     Running   2          44h

4.分别导入各环境的数据库脚本以及授权

在mfyxw10.mfyxw.com主机上操作

(1)test环境的数据库脚本如下(建议vi /root/apolloconfigtest.sql，再复制粘贴内容)：

/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;
/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE=‘NO_AUTO_VALUE_ON_ZERO‘ */;
/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */;

# Create Database
# ------------------------------------------------------------
CREATE DATABASE IF NOT EXISTS ApolloConfigTestDB DEFAULT CHARACTER SET = utf8mb4;

Use ApolloConfigTestDB;

# Dump of table app
# ------------------------------------------------------------

DROP TABLE IF EXISTS `App`;

CREATE TABLE `App` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘主键‘,
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `Name` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘应用名‘,
  `OrgId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘部门Id‘,
  `OrgName` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘部门名字‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId` (`AppId`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_Name` (`Name`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用表‘;



# Dump of table appnamespace
# ------------------------------------------------------------

DROP TABLE IF EXISTS `AppNamespace`;

CREATE TABLE `AppNamespace` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Name` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘namespace名字，注意，需要全局唯一‘,
  `AppId` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘app id‘,
  `Comment` varchar(64) NOT NULL DEFAULT ‘‘ COMMENT ‘注释‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_AppId` (`AppId`),
  KEY `Name_AppId` (`Name`,`AppId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用namespace定义‘;



# Dump of table audit
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Audit`;

  `EntityName` varchar(50) NOT NULL DEFAULT ‘default‘ COMMENT ‘表名‘,
  `EntityId` int(10) unsigned DEFAULT NULL COMMENT ‘记录ID‘,
  `OpName` varchar(50) NOT NULL DEFAULT ‘default‘ COMMENT ‘操作类型‘,
  `Comment` varchar(500) DEFAULT NULL COMMENT ‘备注‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘日志审计表‘;



# Dump of table cluster
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Cluster`;

CREATE TABLE `Cluster` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Name` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘集群名字‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_AppId_Name` (`AppId`,`Name`),
  KEY `IX_ParentClusterId` (`ParentClusterId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘集群‘;



# Dump of table commit
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Commit`;

CREATE TABLE `Commit` (
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `Comment` varchar(500) DEFAULT NULL COMMENT ‘备注‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `AppId` (`AppId`(191)),
  KEY `ClusterName` (`ClusterName`(191)),
  KEY `NamespaceName` (`NamespaceName`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘commit 历史表‘;

# Dump of table grayreleaserule
# ------------------------------------------------------------

DROP TABLE IF EXISTS `GrayReleaseRule`;

CREATE TABLE `GrayReleaseRule` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘主键‘,
  `NamespaceName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Namespace Name‘,
  `BranchName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘branch name‘,
  `Rules` varchar(16000) DEFAULT ‘[]‘ COMMENT ‘灰度规则‘,
  `ReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘灰度对应的release‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_Namespace` (`AppId`,`ClusterName`,`NamespaceName`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘灰度规则表‘;


# Dump of table instance
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Instance`;
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `AppId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `DataCenter` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘Data Center Name‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_UNIQUE_KEY` (`AppId`,`ClusterName`,`Ip`,`DataCenter`),
  KEY `IX_IP` (`Ip`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘使用配置的应用实例‘;



# Dump of table instanceconfig
# ------------------------------------------------------------

DROP TABLE IF EXISTS `InstanceConfig`;

CREATE TABLE `InstanceConfig` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `InstanceId` int(11) unsigned DEFAULT NULL COMMENT ‘Instance Id‘,
  `ConfigAppId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Config App Id‘,
  `ConfigClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Config Cluster Name‘,
  `ReleaseDeliveryTime` timestamp NULL DEFAULT NULL COMMENT ‘配置获取时间‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_UNIQUE_KEY` (`InstanceId`,`ConfigAppId`,`ConfigNamespaceName`),
  KEY `IX_ReleaseKey` (`ReleaseKey`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`),
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用实例的配置信息‘;



# Dump of table item
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Item`;

CREATE TABLE `Item` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `Value` longtext NOT NULL COMMENT ‘配置项值‘,
  `Comment` varchar(1024) DEFAULT ‘‘ COMMENT ‘注释‘,
  `LineNum` int(10) unsigned DEFAULT ‘0‘ COMMENT ‘行号‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_GroupId` (`NamespaceId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘配置项目‘;



# Dump of table namespace
# ------------------------------------------------------------

CREATE TABLE `Namespace` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘Cluster Name‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘Namespace Name‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId_ClusterName_NamespaceName` (`AppId`(191),`ClusterName`(191),`NamespaceName`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_NamespaceName` (`NamespaceName`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘命名空间‘;



# Dump of table namespacelock
# ------------------------------------------------------------

DROP TABLE IF EXISTS `NamespaceLock`;

CREATE TABLE `NamespaceLock` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增id‘,
  `NamespaceId` int(10) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘集群NamespaceId‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘default‘ COMMENT ‘最后修改人邮箱前缀‘,
  `IsDeleted` bit(1) DEFAULT b‘0‘ COMMENT ‘软删除‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_NamespaceId` (`NamespaceId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘namespace的编辑锁‘;



# Dump of table release
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Release`;

CREATE TABLE `Release` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `ReleaseKey` varchar(64) NOT NULL DEFAULT ‘‘ COMMENT ‘发布的Key‘,
  `Name` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘发布名字‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `Configurations` longtext NOT NULL COMMENT ‘发布配置‘,
  `IsAbandoned` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘是否废弃‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId_ClusterName_GroupName` (`AppId`(191),`ClusterName`(191),`NamespaceName`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_ReleaseKey` (`ReleaseKey`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘发布‘;


# Dump of table releasehistory
# ------------------------------------------------------------

DROP TABLE IF EXISTS `ReleaseHistory`;

CREATE TABLE `ReleaseHistory` (
  `ClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `NamespaceName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `BranchName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘发布分支名‘,
  `ReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘关联的Release Id‘,
  `PreviousReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘前一次发布的ReleaseId‘,
  `OperationContext` longtext NOT NULL COMMENT ‘发布上下文信息‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  KEY `IX_ReleaseId` (`ReleaseId`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘发布历史‘;


# Dump of table releasemessage
DROP TABLE IF EXISTS `ReleaseMessage`;

CREATE TABLE `ReleaseMessage` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Message` varchar(1024) NOT NULL DEFAULT ‘‘ COMMENT ‘发布的消息内容‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),




DROP TABLE IF EXISTS `ServerConfig`;

CREATE TABLE `ServerConfig` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `Key` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘配置项Key‘,
  `Value` varchar(2048) NOT NULL DEFAULT ‘default‘ COMMENT ‘配置项值‘,
  `Comment` varchar(1024) DEFAULT ‘‘ COMMENT ‘注释‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  `DataChange_LastTime` timestamp NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP COMMENT ‘最后修改时间‘,
  PRIMARY KEY (`Id`),
  KEY `IX_Key` (`Key`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘配置服务自身配置‘;

# Config
# ------------------------------------------------------------
INSERT INTO `ServerConfig` (`Key`, `Cluster`, `Value`, `Comment`)
VALUES
    (‘eureka.service.url‘, ‘default‘, ‘http://localhost:8080/eureka/‘, ‘Eureka服务Url，多个service>以英文逗号分隔‘),
    (‘namespace.lock.switch‘, ‘default‘, ‘false‘, ‘一次发布只能有一个人修改开关‘),
    (‘item.key.length.limit‘, ‘default‘, ‘128‘, ‘item key 最大长度限制‘),
    (‘item.value.length.limit‘, ‘default‘, ‘20000‘, ‘item value最大长度限制‘),
    (‘config-service.cache.enabled‘, ‘default‘, ‘false‘, ‘ConfigService是否开启缓存，开启后能提高性
能，但是会增大内存消耗！‘);

/*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */;
/*!40101 SET SQL_MODE=@OLD_SQL_MODE */;
/*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */;
/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;
/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;
/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;

(2)导入test环境的数据库脚本

[root@mfyxw10 ~]# mysql -uroot -p < apolloconfigtest.sql
Enter password:                  #输入数据库密码即可完成导入

(3)查看创建的数据库名称及表名

[root@mfyxw10 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 63
Server version: 10.1.45-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| ApolloConfigDB     |
| ApolloConfigTestDB |
| ApolloPortalDB     |
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
6 rows in set (0.01 sec)

MariaDB [(none)]> use ApolloConfigTestDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloConfigTestDB]> show tables;
+------------------------------+
| Tables_in_ApolloConfigTestDB |
+------------------------------+
| App                          |
| AppNamespace                 |
| Audit                        |
| Cluster                      |
| Commit                       |
| GrayReleaseRule              |
| Instance                     |
| InstanceConfig               |
| Item                         |
| Namespace                    |
| NamespaceLock                |
| Release                      |
| ReleaseHistory               |
| ReleaseMessage               |
| ServerConfig                 |
+------------------------------+
15 rows in set (0.00 sec)

MariaDB [ApolloConfigTestDB]>

(4)修改ApolloConfigTestDB数据库的ServerConfig的Value

查看原ServerConfig的Value值

MariaDB [(none)]> use ApolloConfigTestDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloConfigTestDB]> 
MariaDB [ApolloConfigTestDB]> select * from ServerConfig\G
*************************** 1. row ***************************
                       Id: 1
                      Key: eureka.service.url
                  Cluster: default
                    Value: http://localhost:8080/eureka/
                  Comment: Eureka服务Url，多个service以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 2. row ***************************
                       Id: 2
                      Key: namespace.lock.switch
                  Cluster: default
                    Value: false
                  Comment: 一次发布只能有一个人修改开关
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 3. row ***************************
                       Id: 3
                      Key: item.key.length.limit
                  Cluster: default
                    Value: 128
                  Comment: item key 最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 4. row ***************************
                       Id: 4
                      Key: item.value.length.limit
                  Cluster: default
                    Value: 20000
                  Comment: item value最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 5. row ***************************
                       Id: 5
                      Key: config-service.cache.enabled
                  Cluster: default
                    Value: false
                  Comment: ConfigService是否开启缓存，开启后能提高性能，但是会增大内存消耗！
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
5 rows in set (0.00 sec)

MariaDB [ApolloConfigTestDB]>

更新ServerConfig的Value值

MariaDB [ApolloConfigTestDB]> update ApolloConfigTestDB.ServerConfig set ServerConfig.Value="http://config-test.od.com/eureka" where ServerConfig.key="eureka.service.url";
Query OK, 1 row affected (0.00 sec)
Rows matched: 1  Changed: 1  Warnings: 0

MariaDB [ApolloConfigTestDB]>

查看更新后的ServerConfig的Value值

MariaDB [ApolloConfigTestDB]> select * from ServerConfig\G;
*************************** 1. row ***************************
                       Id: 1
                      Key: eureka.service.url
                  Cluster: default
                    Value: http://config-test.od.com/eureka
                  Comment: Eureka服务Url，多个service以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:57:02
*************************** 2. row ***************************
                       Id: 2
                      Key: namespace.lock.switch
                  Cluster: default
                    Value: false
                  Comment: 一次发布只能有一个人修改开关
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 3. row ***************************
                       Id: 3
                      Key: item.key.length.limit
                  Cluster: default
                    Value: 128
                  Comment: item key 最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 4. row ***************************
                       Id: 4
                      Key: item.value.length.limit
                  Cluster: default
                    Value: 20000
                  Comment: item value最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
*************************** 5. row ***************************
                       Id: 5
                      Key: config-service.cache.enabled
                  Cluster: default
                    Value: false
                  Comment: ConfigService是否开启缓存，开启后能提高性能，但是会增大内存消耗！
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 22:14:48
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 22:14:48
5 rows in set (0.00 sec)

ERROR: No query specified

MariaDB [ApolloConfigTestDB]>

(5)对ApolloConfigTestDB数据库授权

MariaDB [(none)]> grant INSERT,UPDATE,DELETE,SELECT on ApolloConfigTestDB.* to "apolloconfig"@"192.168.80.%" identified by "123456";
Query OK, 0 rows affected (0.00 sec)
MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]>

(6)prod环境的数据库脚本如下(建议vi /root/apolloconfigprod.sql，再复制粘贴内容)：

/*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */;
/*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */;
/*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */;
/*!40101 SET NAMES utf8 */;
/*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */;
/*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE=‘NO_AUTO_VALUE_ON_ZERO‘ */;
/*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */;

# Create Database
# ------------------------------------------------------------
CREATE DATABASE IF NOT EXISTS ApolloConfigProdDB DEFAULT CHARACTER SET = utf8mb4;

Use ApolloConfigProdDB;

# Dump of table app
# ------------------------------------------------------------

DROP TABLE IF EXISTS `App`;

CREATE TABLE `App` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘主键‘,
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `Name` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘应用名‘,
  `OrgId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘部门Id‘,
  `OrgName` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘部门名字‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId` (`AppId`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_Name` (`Name`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用表‘;



# Dump of table appnamespace
# ------------------------------------------------------------

DROP TABLE IF EXISTS `AppNamespace`;

CREATE TABLE `AppNamespace` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Name` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘namespace名字，注意，需要全局唯一‘,
  `AppId` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘app id‘,
  `Comment` varchar(64) NOT NULL DEFAULT ‘‘ COMMENT ‘注释‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_AppId` (`AppId`),
  KEY `Name_AppId` (`Name`,`AppId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用namespace定义‘;



# Dump of table audit
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Audit`;

  `EntityName` varchar(50) NOT NULL DEFAULT ‘default‘ COMMENT ‘表名‘,
  `EntityId` int(10) unsigned DEFAULT NULL COMMENT ‘记录ID‘,
  `OpName` varchar(50) NOT NULL DEFAULT ‘default‘ COMMENT ‘操作类型‘,
  `Comment` varchar(500) DEFAULT NULL COMMENT ‘备注‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘日志审计表‘;



# Dump of table cluster
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Cluster`;

CREATE TABLE `Cluster` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Name` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘集群名字‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_AppId_Name` (`AppId`,`Name`),
  KEY `IX_ParentClusterId` (`ParentClusterId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘集群‘;



# Dump of table commit
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Commit`;

CREATE TABLE `Commit` (
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `Comment` varchar(500) DEFAULT NULL COMMENT ‘备注‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `AppId` (`AppId`(191)),
  KEY `ClusterName` (`ClusterName`(191)),
  KEY `NamespaceName` (`NamespaceName`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘commit 历史表‘;

# Dump of table grayreleaserule
# ------------------------------------------------------------

DROP TABLE IF EXISTS `GrayReleaseRule`;

CREATE TABLE `GrayReleaseRule` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘主键‘,
  `NamespaceName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Namespace Name‘,
  `BranchName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘branch name‘,
  `Rules` varchar(16000) DEFAULT ‘[]‘ COMMENT ‘灰度规则‘,
  `ReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘灰度对应的release‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_Namespace` (`AppId`,`ClusterName`,`NamespaceName`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘灰度规则表‘;


# Dump of table instance
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Instance`;
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `AppId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `DataCenter` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘Data Center Name‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_UNIQUE_KEY` (`AppId`,`ClusterName`,`Ip`,`DataCenter`),
  KEY `IX_IP` (`Ip`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘使用配置的应用实例‘;



# Dump of table instanceconfig
# ------------------------------------------------------------

DROP TABLE IF EXISTS `InstanceConfig`;

CREATE TABLE `InstanceConfig` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `InstanceId` int(11) unsigned DEFAULT NULL COMMENT ‘Instance Id‘,
  `ConfigAppId` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Config App Id‘,
  `ConfigClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘Config Cluster Name‘,
  `ReleaseDeliveryTime` timestamp NULL DEFAULT NULL COMMENT ‘配置获取时间‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_UNIQUE_KEY` (`InstanceId`,`ConfigAppId`,`ConfigNamespaceName`),
  KEY `IX_ReleaseKey` (`ReleaseKey`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`),
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘应用实例的配置信息‘;



# Dump of table item
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Item`;

CREATE TABLE `Item` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `Value` longtext NOT NULL COMMENT ‘配置项值‘,
  `Comment` varchar(1024) DEFAULT ‘‘ COMMENT ‘注释‘,
  `LineNum` int(10) unsigned DEFAULT ‘0‘ COMMENT ‘行号‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `IX_GroupId` (`NamespaceId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘配置项目‘;



# Dump of table namespace
# ------------------------------------------------------------

CREATE TABLE `Namespace` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `AppId` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘AppID‘,
  `ClusterName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘Cluster Name‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘Namespace Name‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId_ClusterName_NamespaceName` (`AppId`(191),`ClusterName`(191),`NamespaceName`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_NamespaceName` (`NamespaceName`(191))
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘命名空间‘;



# Dump of table namespacelock
# ------------------------------------------------------------

DROP TABLE IF EXISTS `NamespaceLock`;

CREATE TABLE `NamespaceLock` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增id‘,
  `NamespaceId` int(10) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘集群NamespaceId‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘default‘ COMMENT ‘最后修改人邮箱前缀‘,
  `IsDeleted` bit(1) DEFAULT b‘0‘ COMMENT ‘软删除‘,
  PRIMARY KEY (`Id`),
  UNIQUE KEY `IX_NamespaceId` (`NamespaceId`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘namespace的编辑锁‘;



# Dump of table release
# ------------------------------------------------------------

DROP TABLE IF EXISTS `Release`;

CREATE TABLE `Release` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `ReleaseKey` varchar(64) NOT NULL DEFAULT ‘‘ COMMENT ‘发布的Key‘,
  `Name` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘发布名字‘,
  `NamespaceName` varchar(500) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `Configurations` longtext NOT NULL COMMENT ‘发布配置‘,
  `IsAbandoned` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘是否废弃‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  PRIMARY KEY (`Id`),
  KEY `AppId_ClusterName_GroupName` (`AppId`(191),`ClusterName`(191),`NamespaceName`(191)),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),
  KEY `IX_ReleaseKey` (`ReleaseKey`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘发布‘;


# Dump of table releasehistory
# ------------------------------------------------------------

DROP TABLE IF EXISTS `ReleaseHistory`;

CREATE TABLE `ReleaseHistory` (
  `ClusterName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘ClusterName‘,
  `NamespaceName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘namespaceName‘,
  `BranchName` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘发布分支名‘,
  `ReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘关联的Release Id‘,
  `PreviousReleaseId` int(11) unsigned NOT NULL DEFAULT ‘0‘ COMMENT ‘前一次发布的ReleaseId‘,
  `OperationContext` longtext NOT NULL COMMENT ‘发布上下文信息‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  KEY `IX_ReleaseId` (`ReleaseId`),
  KEY `IX_DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘发布历史‘;


# Dump of table releasemessage
DROP TABLE IF EXISTS `ReleaseMessage`;

CREATE TABLE `ReleaseMessage` (
  `Id` int(11) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增主键‘,
  `Message` varchar(1024) NOT NULL DEFAULT ‘‘ COMMENT ‘发布的消息内容‘,
  PRIMARY KEY (`Id`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`),




DROP TABLE IF EXISTS `ServerConfig`;

CREATE TABLE `ServerConfig` (
  `Id` int(10) unsigned NOT NULL AUTO_INCREMENT COMMENT ‘自增Id‘,
  `Key` varchar(64) NOT NULL DEFAULT ‘default‘ COMMENT ‘配置项Key‘,
  `Value` varchar(2048) NOT NULL DEFAULT ‘default‘ COMMENT ‘配置项值‘,
  `Comment` varchar(1024) DEFAULT ‘‘ COMMENT ‘注释‘,
  `IsDeleted` bit(1) NOT NULL DEFAULT b‘0‘ COMMENT ‘1: deleted, 0: normal‘,
  `DataChange_CreatedBy` varchar(32) NOT NULL DEFAULT ‘default‘ COMMENT ‘创建人邮箱前缀‘,
  `DataChange_CreatedTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP COMMENT ‘创建时间‘,
  `DataChange_LastModifiedBy` varchar(32) DEFAULT ‘‘ COMMENT ‘最后修改人邮箱前缀‘,
  `DataChange_LastTime` timestamp NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP COMMENT ‘最后修改时间‘,
  PRIMARY KEY (`Id`),
  KEY `IX_Key` (`Key`),
  KEY `DataChange_LastTime` (`DataChange_LastTime`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COMMENT=‘配置服务自身配置‘;

# Config
# ------------------------------------------------------------
INSERT INTO `ServerConfig` (`Key`, `Cluster`, `Value`, `Comment`)
VALUES
    (‘eureka.service.url‘, ‘default‘, ‘http://localhost:8080/eureka/‘, ‘Eureka服务Url，多个service>以英文逗号分隔‘),
    (‘namespace.lock.switch‘, ‘default‘, ‘false‘, ‘一次发布只能有一个人修改开关‘),
    (‘item.key.length.limit‘, ‘default‘, ‘128‘, ‘item key 最大长度限制‘),
    (‘item.value.length.limit‘, ‘default‘, ‘20000‘, ‘item value最大长度限制‘),
    (‘config-service.cache.enabled‘, ‘default‘, ‘false‘, ‘ConfigService是否开启缓存，开启后能提高性
能，但是会增大内存消耗！‘);

/*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */;
/*!40101 SET SQL_MODE=@OLD_SQL_MODE */;
/*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */;
/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;
/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;
/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;

(7)导入prod环境的数据库脚本

[root@mfyxw10 ~]# mysql -uroot -p < apolloconfigprod.sql
Enter password:                  #输入数据库密码即可完成导入

(8)查看创建的数据库名称及表名

[root@mfyxw10 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 63
Server version: 10.1.45-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| ApolloConfigDB     |
| ApolloConfigProdDB |
| ApolloConfigTestDB |
| ApolloPortalDB     |
| information_schema |
| mysql              |
| performance_schema |
+--------------------+
7 rows in set (0.00 sec)

MariaDB [(none)]> 
MariaDB [(none)]> use ApolloConfigProdDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloConfigProdDB]> show tables;
+------------------------------+
| Tables_in_ApolloConfigProdDB |
+------------------------------+
| App                          |
| AppNamespace                 |
| Audit                        |
| Cluster                      |
| Commit                       |
| GrayReleaseRule              |
| Instance                     |
| InstanceConfig               |
| Item                         |
| Namespace                    |
| NamespaceLock                |
| Release                      |
| ReleaseHistory               |
| ReleaseMessage               |
| ServerConfig                 |
+------------------------------+
15 rows in set (0.00 sec)

MariaDB [ApolloConfigProdDB]>

(9)修改ApolloConfigProdDB数据库的ServerConfig的Value

查看原ServerConfig的Value值

MariaDB [(none)]> use ApolloConfigProdDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloConfigProdDB]> select * from ServerConfig\G
*************************** 1. row ***************************
                       Id: 1
                      Key: eureka.service.url
                  Cluster: default
                    Value: http://localhost:8080/eureka/
                  Comment: Eureka服务Url，多个service以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 2. row ***************************
                       Id: 2
                      Key: namespace.lock.switch
                  Cluster: default
                    Value: false
                  Comment: 一次发布只能有一个人修改开关
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 3. row ***************************
                       Id: 3
                      Key: item.key.length.limit
                  Cluster: default
                    Value: 128
                  Comment: item key 最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 4. row ***************************
                       Id: 4
                      Key: item.value.length.limit
                  Cluster: default
                    Value: 20000
                  Comment: item value最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 5. row ***************************
                       Id: 5
                      Key: config-service.cache.enabled
                  Cluster: default
                    Value: false
                  Comment: ConfigService是否开启缓存，开启后能提高性能，但是会增大内存消耗！
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
5 rows in set (0.00 sec)

MariaDB [ApolloConfigProdDB]>

更新ServerConfig的Value值

MariaDB [ApolloConfigProdDB]> update ApolloConfigProdDB.ServerConfig set ServerConfig.Value="http://config-prod.od.com/eureka" where ServerConfig.key="eureka.service.url";
Query OK, 0 rows affected (0.00 sec)
Rows matched: 0  Changed: 0  Warnings: 0

MariaDB [ApolloConfigProdDB]>

查看更新后的ServerConfig的Value值

MariaDB [ApolloConfigProdDB]> select * from ServerConfig\G;
*************************** 1. row ***************************
                       Id: 1
                      Key: eureka.service.url
                  Cluster: default
                    Value: http://config-prod.od.com/eureka
                  Comment: Eureka服务Url，多个service以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 2. row ***************************
                       Id: 2
                      Key: namespace.lock.switch
                  Cluster: default
                    Value: false
                  Comment: 一次发布只能有一个人修改开关
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 3. row ***************************
                       Id: 3
                      Key: item.key.length.limit
                  Cluster: default
                    Value: 128
                  Comment: item key 最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 4. row ***************************
                       Id: 4
                      Key: item.value.length.limit
                  Cluster: default
                    Value: 20000
                  Comment: item value最大长度限制
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
*************************** 5. row ***************************
                       Id: 5
                      Key: config-service.cache.enabled
                  Cluster: default
                    Value: false
                  Comment: ConfigService是否开启缓存，开启后能提高性能，但是会增大内存消耗！
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-09 23:04:16
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:04:16
5 rows in set (0.00 sec)

ERROR: No query specified

MariaDB [ApolloConfigProdDB]>

(5)对ApolloConfigProdDB数据库授权

MariaDB [(none)]> grant INSERT,DELETE,UPDATE,SELECT on ApolloConfigProdDB.* to "apolloconfig"@"192.168.80.%" identified by "123456";
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]>

5.修改ApolloPortalDB中的ServerConfig的Value值

(1)查看原来ServerConfig的值

MariaDB [(none)]> use ApolloPortalDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloPortalDB]> show tables;
+--------------------------+
| Tables_in_ApolloPortalDB |
+--------------------------+
| App                      |
| AppNamespace             |
| Authorities              |
| Consumer                 |
| ConsumerAudit            |
| ConsumerRole             |
| ConsumerToken            |
| Favorite                 |
| Permission               |
| Role                     |
| RolePermission           |
| ServerConfig             |
| UserRole                 |
| Users                    |
+--------------------------+
14 rows in set (0.00 sec)

MariaDB [ApolloPortalDB]> select * from ServerConfig\G;
*************************** 1. row ***************************
                       Id: 1
                      Key: apollo.portal.envs
                    Value: dev
                  Comment: 可支持的环境列表
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 2. row ***************************
                       Id: 2
                      Key: organizations
                    Value: [{"orgId":"yf1","orgName":"Linux学院"},{"orgId":"yf2","orgName":"云计算学院"},{"orgId":"yf3","orgName":"Python学院"},{"orgId":"yf4","orgName":"大数据学院"}]
                  Comment: 部门列表
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:31:50
*************************** 3. row ***************************
                       Id: 3
                      Key: superAdmin
                    Value: apollo
                  Comment: Portal超级管理员
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 4. row ***************************
                       Id: 4
                      Key: api.readTimeout
                    Value: 10000
                  Comment: http接口read timeout
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 5. row ***************************
                       Id: 5
                      Key: consumer.token.salt
                    Value: someSalt
                  Comment: consumer token salt
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 6. row ***************************
                       Id: 6
                      Key: admin.createPrivateNamespace.switch
                    Value: true
                  Comment: 是否允许项目管理员创建私有namespace
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 7. row ***************************
                       Id: 7
                      Key: configView.memberOnly.envs
                    Value: pro
                  Comment: 只对项目成员显示配置信息的环境列表，多个env以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
7 rows in set (0.00 sec)

ERROR: No query specified

MariaDB [ApolloPortalDB]>

(2)更新ServerConfig的Value的值为fat,pro

MariaDB [ApolloPortalDB]> update ApolloPortalDB.ServerConfig set ServerConfig.Value=‘fat,pro‘ where Id=1;
Query OK, 1 row affected (0.00 sec)
Rows matched: 1  Changed: 1  Warnings: 0

MariaDB [ApolloPortalDB]> flush privileges;
Query OK, 0 rows affected (0.00 sec)

MariaDB [ApolloPortalDB]>

(3)查看更新ServerConfig的ID为1的Value的值

MariaDB [ApolloPortalDB]> select * from ServerConfig\G
*************************** 1. row ***************************
                       Id: 1
                      Key: apollo.portal.envs
                    Value: fat,pro
                  Comment: 可支持的环境列表
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-09 23:22:50
*************************** 2. row ***************************
                       Id: 2
                      Key: organizations
                    Value: [{"orgId":"yf1","orgName":"Linux学院"},{"orgId":"yf2","orgName":"云计算学院"},{"orgId":"yf3","orgName":"Python学院"},{"orgId":"yf4","orgName":"大数据学院"}]
                  Comment: 部门列表
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:31:50
*************************** 3. row ***************************
                       Id: 3
                      Key: superAdmin
                    Value: apollo
                  Comment: Portal超级管理员
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 4. row ***************************
                       Id: 4
                      Key: api.readTimeout
                    Value: 10000
                  Comment: http接口read timeout
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 5. row ***************************
                       Id: 5
                      Key: consumer.token.salt
                    Value: someSalt
                  Comment: consumer token salt
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 6. row ***************************
                       Id: 6
                      Key: admin.createPrivateNamespace.switch
                    Value: true
                  Comment: 是否允许项目管理员创建私有namespace
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
*************************** 7. row ***************************
                       Id: 7
                      Key: configView.memberOnly.envs
                    Value: pro
                  Comment: 只对项目成员显示配置信息的环境列表，多个env以英文逗号分隔
                IsDeleted:  
     DataChange_CreatedBy: default
   DataChange_CreatedTime: 2020-07-06 10:15:59
DataChange_LastModifiedBy: 
      DataChange_LastTime: 2020-07-06 10:15:59
7 rows in set (0.00 sec)

MariaDB [ApolloPortalDB]>

6.修改apollo-portal的configmap.yaml资源配置清单并应用

在运维主机mfyxw50.mfyxw.com上操作

(1)修改apollo-portal的configmap资源配置清单

[root@mfyxw50 ~]# cat > /data/k8s-yaml/apollo-portal/configmap.yaml << EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: apollo-portal-cm
  namespace: infra
data:
  application-github.properties: |
    # DataSource
    spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloPortalDB?characterEncoding=utf8
    spring.datasource.username = apolloportal
    spring.datasource.password = 123456
  app.properties: |
    appId=100003173
  apollo-env.properties: |
    fat.meta=http://config-test.od.com
    pro.meta=http://config-prod.od.com
EOF

(2)应用apollo-portal的configmap资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台主机上操作即可

[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/apollo-portal/configmap.yaml
configmap/apollo-portal-cm configured
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get cm -n infra
NAME                      DATA   AGE
apollo-adminservice-cm    2      3d22h
apollo-configservice-cm   2      6d15h
apollo-portal-cm          3      3d15h
dubbo-monitor-cm          1      21d
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl describe cm apollo-portal-cm -n infra
Name:         apollo-portal-cm
Namespace:    infra
Labels:       <none>
Annotations:  kubectl.kubernetes.io/last-applied-configuration:
                {"apiVersion":"v1","data":{"apollo-env.properties":"fat.meta=http://config-test.od.com\npro.meta=http://config-prod.od.com\n","app.propert...

Data
====
app.properties:
----
appId=100003173

application-github.properties:
----
# DataSource
spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloPortalDB?characterEncoding=utf8
spring.datasource.username = apolloportal
spring.datasource.password = 123456

apollo-env.properties:
----
fat.meta=http://config-test.od.com
pro.meta=http://config-prod.od.com

Events:  <none>

7.创建资源配置清单

(1)创建资源配置清单存放目录

在运维主机(mfyxw50.mfyxw.com)上操作

[root@mfyxw50 ~]# mkdir -p /data/k8s-yaml/test/{apollo-configservice,apollo-adminservice,dubbo-demo-service,dubbo-demo-consumer}
[root@mfyxw50 ~]# mkdir -p /data/k8s-yaml/prod/{apollo-configservice,apollo-adminservice,dubbo-demo-service,dubbo-demo-consumer}

(2)创建test环境的apollo-configservice资源配置清单

在运维主机(mfyxw50.mfyxw.com)上操作

deployment.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-configservice/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: apollo-configservice
  namespace: test
  labels:
    name: apollo-configservice
spec:
  replicas: 1
  selector:
    matchLabels:
      name: apollo-configservice
  template:
    metadata:
      labels:
        app: apollo-configservice
        name: apollo-configservice
    spec:
      volumes:
      - name: configmap-volume
        configMap:
          name: apollo-configservice-cm
      containers:
      - name: apollo-configservice
        image: harbor.od.com/infra/apollo-configservice:v1.5.1
        ports:
        - containerPort: 8080
          protocol: TCP
        volumeMounts:
        - name: configmap-volume
          mountPath: /apollo-configservice/config
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

configmap.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-configservice/configmap.yaml << EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: apollo-configservice-cm
  namespace: test
data:
  application-github.properties: |
    # DataSource
    spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloConfigTestDB?characterEncoding=utf8
    spring.datasource.username = apolloconfig
    spring.datasource.password = 123456
    eureka.service.url = http://config-test.od.com/eureka
  app.properties: |
    appId=100003171
EOF

service.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-configservice/service.yaml <<EOF
kind: Service
apiVersion: v1
metadata: 
  name: apollo-configservice
  namespace: test
spec:
  ports:
  - protocol: TCP
    port: 8080
    targetPort: 8080
  selector: 
    app: apollo-configservice
  clusterIP: None
  type: ClusterIP
  sessionAffinity: None
EOF

Ingress.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-configservice/Ingress.yaml <<EOF
kind: Ingress
apiVersion: extensions/v1beta1
metadata: 
  name: apollo-configservice
  namespace: test
spec:
  rules:
  - host: config-test.od.com
    http:
      paths:
      - path: /
        backend: 
          serviceName: apollo-configservice
          servicePort: 8080
EOF

(3)应用测试环境的apollo-configservice配置资源清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)上任意一台执行即可

[root@mfyxw30 ~]# kubectl get pod -n test
No resources found.
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-configservice/configmap.yaml
configmap/apollo-configservice-cm created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-configservice/deployment.yaml
deployment.extensions/apollo-configservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-configservice/service.yaml
service/apollo-configservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-configservice/Ingress.yaml
ingress.extensions/apollo-configservice created
[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-configservice-5f6555448-qrj77   1/1     Running   0          40s

(4)在浏览器访问config-test.od.com

在eurake中能看到测试环境test的apollo-configservice已经注册到eurake了

(5)创建test环境的apollo-adminservice资源配置清单

在运维主机mfyxw50.mfyxw.com上执行

deployment.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-adminservice/deployment.yaml <<EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: apollo-adminservice
  namespace: test
  labels:
    name: apollo-adminservice
spec:
  replicas: 1
  selector:
    matchLabels:
      name: apollo-adminservice
  template:
    metadata:
      labels:
        app: apollo-adminservice
        name: apollo-adminservice
    spec:
      volumes:
      - name: configmap-volume
        configMap:
          name: apollo-adminservice-cm
      containers:
      - name: apollo-adminservice
        image: harbor.od.com/infra/apollo-adminservice:v1.5.1
        ports:
        - containerPort: 8080
          protocol: TCP
        volumeMounts:
        - name: configmap-volume
          mountPath: /apollo-adminservice/config
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

configmap.yaml

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/apollo-adminservice/configmap.yaml <<EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: apollo-adminservice-cm
  namespace: test
data:
  application-github.properties: |
    # DataSource
    spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloConfigTestDB?characterEncoding=utf8
    spring.datasource.username = apolloconfig
    spring.datasource.password = 123456
    eureka.service.url = http://config-test.od.com/eureka
  app.properties: |
    appId=100003172
EOF

(8)应用测试环境test的apollo-adminservice配置资源清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)上任意一台执行即可

[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-adminservice/configmap.yaml
configmap/apollo-adminservice-cm created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/apollo-adminservice/deployment.yaml
deployment.extensions/apollo-adminservice created
[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-ddjjc   1/1     Running   0          24s
apollo-configservice-5f6555448-qrj77   1/1     Running   0          20m

(9)再次在浏览器访问config-test.od.com

可以看到，apollo-configservice和apollo-adminservice都分别注册到eurake了

(10)创建prod生产环境configservice资源配置清单

在运维主机mfyxw50.mfyxw.com上操作

deployment.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-configservice/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: apollo-configservice
  namespace: prod
  labels:
    name: apollo-configservice
spec:
  replicas: 1
  selector:
    matchLabels:
      name: apollo-configservice
  template:
    metadata:
      labels:
        app: apollo-configservice
        name: apollo-configservice
    spec:
      volumes:
      - name: configmap-volume
        configMap:
          name: apollo-configservice-cm
      containers:
      - name: apollo-configservice
        image: harbor.od.com/infra/apollo-configservice:v1.5.1
        ports:
        - containerPort: 8080
          protocol: TCP
        volumeMounts:
        - name: configmap-volume
          mountPath: /apollo-configservice/config
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

configmap.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-configservice/configmap.yaml << EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: apollo-configservice-cm
  namespace: prod
data:
  application-github.properties: |
    # DataSource
    spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloConfigProdDB?characterEncoding=utf8
    spring.datasource.username = apolloconfig
    spring.datasource.password = 123456
    eureka.service.url = http://config-prod.od.com/eureka
  app.properties: |
    appId=100003171
EOF

Ingress.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-configservice/Ingress.yaml <<EOF
kind: Ingress
apiVersion: extensions/v1beta1
metadata: 
  name: apollo-configservice
  namespace: prod
spec:
  rules:
  - host: config-prod.od.com
    http:
      paths:
      - path: /
        backend: 
          serviceName: apollo-configservice
          servicePort: 8080
EOF

service.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-configservice/service.yaml <<EOF
kind: Service
apiVersion: v1
metadata: 
  name: apollo-configservice
  namespace: prod
spec:
  ports:
  - protocol: TCP
    port: 8080
    targetPort: 8080
  selector: 
    app: apollo-configservice
  clusterIP: None
  type: ClusterIP
  sessionAffinity: None
EOF

(11)创建prod生产环境adminservice资源配置清单

在运维主机mfyxw50.mfyxw.com上操作

deployment.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-adminservice/deployment.yaml <<EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: apollo-adminservice
  namespace: prod
  labels:
    name: apollo-adminservice
spec:
  replicas: 1
  selector:
    matchLabels:
      name: apollo-adminservice
  template:
    metadata:
      labels:
        app: apollo-adminservice
        name: apollo-adminservice
    spec:
      volumes:
      - name: configmap-volume
        configMap:
          name: apollo-adminservice-cm
      containers:
      - name: apollo-adminservice
        image: harbor.od.com/infra/apollo-adminservice:v1.5.1
        ports:
        - containerPort: 8080
          protocol: TCP
        volumeMounts:
        - name: configmap-volume
          mountPath: /apollo-adminservice/config
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

configmap.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/apollo-adminservice/configmap.yaml <<EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: apollo-adminservice-cm
  namespace: prod
data:
  application-github.properties: |
    # DataSource
    spring.datasource.url = jdbc:mysql://mysql.od.com:3306/ApolloConfigProdDB?characterEncoding=utf8
    spring.datasource.username = apolloconfig
    spring.datasource.password = 123456
    eureka.service.url = http://config-prod.od.com/eureka
  app.properties: |
    appId=100003172
EOF

(12)创建prod生产环境configservice和adminservice资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)上任意一台执行即可

[root@mfyxw30 ~]# kubectl get pod -n prod
No resources found.
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-configservice/configmap.yaml
configmap/apollo-configservice-cm created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-configservice/deployment.yaml
deployment.extensions/apollo-configservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-configservice/service.yaml
service/apollo-configservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-configservice/Ingress.yaml
ingress.extensions/apollo-configservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-adminservice/configmap.yaml
configmap/apollo-adminservice-cm created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/apollo-adminservice/deployment.yaml
deployment.extensions/apollo-adminservice created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get pod -n prod
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-dvlfx   1/1     Running   0          32s
apollo-configservice-5f6555448-7kj46   1/1     Running   0          66s

(13)在浏览器中访问config-prod.od.com

8.将portal应用起来

我的portal在前面的实验已经启动了，也被我在dashboard中设置为0了，建议登录portal.od.com里删除dubbo-demo-service和dubbo-demo-web项目或进入ApolloPortalDB数据库删除清除AppNamespace和App表的内容

在浏览器访问portal.od.com,表示已经停止了portal

那我就去数据库中进行操作吧

在mfyxw10.mfyxw.com主机上操作

(1)对portal数据库的AppNamespace和App内容清空

[root@mfyxw10 ~]# mysql -uroot -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 169
Server version: 10.1.45-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> use ApolloPortalDB;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
MariaDB [ApolloPortalDB]> select * from AppNamespace;
+----+-------------+--------------------+------------+----------+-----------------------+-----------+----------------------+------------------------+---------------------------+---------------------+
| Id | Name        | AppId              | Format     | IsPublic | Comment               | IsDeleted | DataChange_CreatedBy | DataChange_CreatedTime | DataChange_LastModifiedBy | DataChange_LastTime |
+----+-------------+--------------------+------------+----------+-----------------------+-----------+----------------------+------------------------+---------------------------+---------------------+
|  1 | application | dubbo-demo-service | properties |          | default app namespace |           | apollo               | 2020-07-07 21:22:36    | apollo                    | 2020-07-07 21:22:36 |
|  2 | application | dubbo-demo-web     | properties |          | default app namespace |           | apollo               | 2020-07-09 14:10:45    | apollo                    | 2020-07-09 14:10:45 |
+----+-------------+--------------------+------------+----------+-----------------------+-----------+----------------------+------------------------+---------------------------+---------------------+
2 rows in set (0.00 sec)

MariaDB [ApolloPortalDB]> select * from App;
+----+--------------------+----------------------+-------+-------------+-----------+----------------+-----------+----------------------+------------------------+---------------------------+---------------------+
| Id | AppId              | Name                 | OrgId | OrgName     | OwnerName | OwnerEmail     | IsDeleted | DataChange_CreatedBy | DataChange_CreatedTime | DataChange_LastModifiedBy | DataChange_LastTime |
+----+--------------------+----------------------+-------+-------------+-----------+----------------+-----------+----------------------+------------------------+---------------------------+---------------------+
|  1 | dubbo-demo-service | dubbo服务提供者      | yf1   | Linux学院   | apollo    | mapleyf@qq.com |           | apollo               | 2020-07-07 21:22:36    | apollo                    | 2020-07-07 21:22:36 |
|  2 | dubbo-demo-web     | dubbo服务消费者      | yf1   | Linux学院   | apollo    | mapleyf@qq.com |           | apollo               | 2020-07-09 14:10:45    | apollo                    | 2020-07-09 14:10:45 |
+----+--------------------+----------------------+-------+-------------+-----------+----------------+-----------+----------------------+------------------------+---------------------------+---------------------+
2 rows in set (0.00 sec)

MariaDB [ApolloPortalDB]> truncate table AppNamespace;
Query OK, 0 rows affected (0.01 sec)

MariaDB [ApolloPortalDB]> truncate table App;
Query OK, 0 rows affected (0.01 sec)

MariaDB [ApolloPortalDB]> select * from AppNamespace;
Empty set (0.00 sec)

MariaDB [ApolloPortalDB]> select * from App;
Empty set (0.00 sec)

MariaDB [ApolloPortalDB]>

(2)应用portal的deployment.yaml资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台执行

portal的资源配置清单在之前的应用了，只是此节实验就把deployment给delete了，现在重新应用，前面已经修改了configmap

[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                             READY   STATUS    RESTARTS   AGE
dubbo-monitor-6676dd74cc-9hghb   1/1     Running   22         21d
dubbo-monitor-6676dd74cc-rd86g   1/1     Running   21         21d
jenkins-b99776c69-49dnr          1/1     Running   2          2d3h
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/apollo-portal/deployment.yaml
deployment.extensions/apollo-portal created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                             READY   STATUS    RESTARTS   AGE
apollo-portal-57bc86966d-rgvs8   1/1     Running   0          25s
dubbo-monitor-6676dd74cc-9hghb   1/1     Running   22         21d
dubbo-monitor-6676dd74cc-rd86g   1/1     Running   21         21d
jenkins-b99776c69-49dnr          1/1     Running   2          2d3h

(3)浏览portal.od.com，可以看到是一个没有任何项目的了

9.分别在portal中创建二个项目和新增配置项

(1)添加dubbo-demo-service提供者项目

(2)添加dubbo-demo-service提供者的配置并发布

测试环境的配置并发布

新增配置

添加测试环境的配置项：dubbo.registry

添加测试环境的配置项：dubbo.port

单击发布

完成发布

生产环境的配置并发布

新增配置

添加生产环境的配置项：dubbo.registry

添加生产环境的配置项：dubbo.port

发布

成功分布

(3)添加dubbo-demo-web消费者项目

(4)添加dubbo-demo-web消费者的配置并发布

单击新增配置项(测试环境)

添加测试环境的配置项：dubbo.registry

单击发布

成功发布测试环境dubbo的服务消费者注册中心

单击新增配置项(生产环境)

添加生产环境的配置项：dubbo.registry

单击发布

成功发布生产环境dubbo的服务消费者注册中心

10.构建测试环境的dubbo-demo-service镜像

登录jenkins，构建dubbo-demo-service镜像

构建成功

11.交付测试环境的dubbo提供者

(1)创建测试环境的dubbo-demo-service资源配置清单

在运维主机mfyxw50.mfyxw.com上操作

deployment.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/dubbo-demo-service/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-service
  namespace: test
  labels:
    name: dubbo-demo-service
spec:
  replicas: 1
  selector:
    matchLabels:
      name: dubbo-demo-service
  template:
    metadata:
      labels:
        app: dubbo-demo-service
        name: dubbo-demo-service
    spec:
      containers:
      - name: dubbo-demo-service
        image: harbor.od.com/app/dubbo-demo-service:apollo_20200707_2136
        ports:
        - containerPort: 20880
          protocol: TCP
        env:
        - name: JAR_BALL
          value: dubbo-server.jar
        - name: C_OPTS
          value: -Denv=fat -Dapollo.meta=http://config-test.od.com
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
EOF

(2)应用测试环境的dubbo-demo-service资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一节点执行

[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-ddjjc   1/1     Running   2          2d23h
apollo-configservice-5f6555448-qrj77   1/1     Running   2          2d23h
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/dubbo-demo-service/deployment.yaml
deployment.extensions/dubbo-demo-service created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-ddjjc   1/1     Running   2          2d23h
apollo-configservice-5f6555448-qrj77   1/1     Running   2          2d23h
dubbo-demo-service-cc6b9d8c7-zm4sw     1/1     Running   0          13s

(3)修改dubbo-monitor的configmap

可以通过登录dashboard，找到infra名称空间，找到configmap来修改dubbo-monitor-cm的zookeeper指向测试环境

也可以通过资源配置清单来创建并应用

通过资源配置清单来创建

在运维主机mfyxw50.mfyxw.com上执行

[root@mfyxw50 ~]# cat > /data/k8s-yaml/dubbo-monitor/configmap.yaml << EOF
apiVersion: v1
kind: ConfigMap
metadata:
  name: dubbo-monitor-cm
  namespace: infra
data:
  dubbo.properties: |
    dubbo.container=log4j,spring,registry,jetty
    dubbo.application.name=simple-monitor
    dubbo.application.owner=
    dubbo.registry.address=zookeeper://zk-test.od.com:2181
    dubbo.protocol.port=20880
    dubbo.jetty.port=8080
    dubbo.jetty.directory=/dubbo-monitor-simple/monitor
    dubbo.charts.directory=/dubbo-monitor-simple/charts
    dubbo.statistics.directory=/dubbo-monitor-simple/statistics
    dubbo.log4j.file=/dubbo-monitor-simple/logs/dubbo-monitor.log
    dubbo.log4j.level=WARN
EOF

应用dubbo-monitor资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台节点上执行即可

我前面的项目已经应用过了dubbo-monitor资源配置清单，所以，先删除再重新创建，接着把dubbo-monitor的pod删除，自动重新生成即可

[root@mfyxw30 ~]# kubectl delete -f http://k8s-yaml.od.com/dubbo-monitor/configmap.yaml
configmap "dubbo-monitor-cm" deleted
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/dubbo-monitor/configmap.yaml
configmap/dubbo-monitor-cm created
[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                             READY   STATUS    RESTARTS   AGE
apollo-portal-57bc86966d-khxvw   1/1     Running   1          2d18h
dubbo-monitor-6676dd74cc-tlrqz   1/1     Running   0          2m29s
jenkins-b99776c69-49dnr          1/1     Running   4          5d2h
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl delete pod dubbo-monitor-6676dd74cc-tlrqz -n infra
pod "dubbo-monitor-6676dd74cc-tlrqz" deleted
[root@mfyxw30 ~]# kubectl get pod -n infra
NAME                             READY   STATUS    RESTARTS   AGE
apollo-portal-57bc86966d-khxvw   1/1     Running   1          2d19h
dubbo-monitor-6676dd74cc-7bq9j   1/1     Running   0          18m
jenkins-b99776c69-49dnr          1/1     Running   4          5d3h

(4)登录dubbo-monitor查看下测试环境dubbo-demo-service

12.构建测试环境的dubbo消费都镜像

测试环境的消费者构建成功

13.创建测试环境的dubbo消费者的资源配置清单并应用

(1)创建测试环境的dubbo消费者的资源配置清单

在运维主机mfyxw50.mfyxw.com上执行

deployment.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/dubbo-demo-consumer/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-consumer
  namespace: test
  labels:
    name: dubbo-demo-consumer
spec:
  replicas: 1
  selector:
    matchLabels:
      name: dubbo-demo-consumer
  template:
    metadata:
      labels:
        app: dubbo-demo-consumer
        name: dubbo-demo-consumer
    spec:
      containers:
      - name: dubbo-demo-consumer
        image: harbor.od.com/app/dubbo-demo-consumer:apollo_20200713_1714
        ports:
        - containerPort: 8080
          protocol: TCP
        - containerPort: 20880
          protocol: TCP
        env:
        - name: JAR_BALL
          value: dubbo-client.jar
        - name: C_OPTS
          value: -Denv=fat -Dapollo.meta=http://config-test.od.com
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

service.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/dubbo-demo-consumer/service.yaml << EOF
kind: Service
apiVersion: v1
metadata:
  name: dubbo-demo-consumer
  namespace: test
spec:
  ports:
  - protocol: TCP
    port: 8080
    targetPort: 8080
  selector:
    app: dubbo-demo-consumer
  clusterIP: None
  type: ClusterIP
  sessionAffinity: None
EOF

Ingress.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/test/dubbo-demo-consumer/Ingress.yaml << EOF
kind: Ingress
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-consumer
  namespace: test
spec:
  rules:
  - host: demo-test.od.com
    http:
      paths:
      - path: /
        backend:
          serviceName: dubbo-demo-consumer
          servicePort: 8080
EOF

(2)应用测试环境的dubbo消费者的资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台节点上执行即可

[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-ddjjc   1/1     Running   2          3d1h
apollo-configservice-5f6555448-qrj77   1/1     Running   2          3d1h
dubbo-demo-service-cc6b9d8c7-h2rdx     1/1     Running   0          82m
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/dubbo-demo-consumer/deployment.yaml
deployment.extensions/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/dubbo-demo-consumer/service.yaml
service/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/test/dubbo-demo-consumer/Ingress.yaml
ingress.extensions/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get pod -n test
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-ddjjc   1/1     Running   2          3d1h
apollo-configservice-5f6555448-qrj77   1/1     Running   2          3d1h
dubbo-demo-consumer-68466fb764-k2t47   1/1     Running   0          28s
dubbo-demo-service-cc6b9d8c7-h2rdx     1/1     Running   0          83m

(3)登录dubbo-monitor查看，dubbo-demo-consumer是否已经注册了

14.访问dubbo消费者

备注：现已经把测试环境的dubbo提供者和消费者已经交付到k8s集群，测试人员会对此版本进行测试，如没有问题，则可以将此版本镜像交付到生产环境。

15.将测试环境的dubbo提供者和消费者交付到生产环境

分别将dubbo提供者和消费者的资源配置清单复制一份至生产环境

在运维主机mfyxw50.mfyxw.com上执行

(1)创建或修改dubbo提供者的资源配置清单

deployment.yaml文件内容如下：

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/dubbo-demo-service/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-service
  namespace: prod
  labels:
    name: dubbo-demo-service
spec:
  replicas: 1
  selector:
    matchLabels:
      name: dubbo-demo-service
  template:
    metadata:
      labels:
        app: dubbo-demo-service
        name: dubbo-demo-service
    spec:
      containers:
      - name: dubbo-demo-service
        image: harbor.od.com/app/dubbo-demo-service:apollo_20200707_2136
        ports:
        - containerPort: 20880
          protocol: TCP
        env:
        - name: JAR_BALL
          value: dubbo-server.jar
        - name: C_OPTS
          value: -Denv=pro -Dapollo.meta=http://config-prod.od.com
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
EOF

(2)创建或修改dubbo消费者的资源配置清单

deployment.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/dubbo-demo-consumer/deployment.yaml << EOF
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-consumer
  namespace: prod
  labels:
    name: dubbo-demo-consumer
spec:
  replicas: 1
  selector:
    matchLabels:
      name: dubbo-demo-consumer
  template:
    metadata:
      labels:
        app: dubbo-demo-consumer
        name: dubbo-demo-consumer
    spec:
      containers:
      - name: dubbo-demo-consumer
        image: harbor.od.com/app/dubbo-demo-consumer:apollo_20200713_1714
        ports:
        - containerPort: 8080
          protocol: TCP
        - containerPort: 20880
          protocol: TCP
        env:
        - name: JAR_BALL
          value: dubbo-client.jar
        - name: C_OPTS
          value: -Denv=pro -Dapollo.meta=http://config-prod.od.com
        imagePullPolicy: IfNotPresent
      imagePullSecrets:
      - name: harbor
      restartPolicy: Always
      terminationGracePeriodSeconds: 30
      securityContext:
        runAsUser: 0
      schedulerName: default-scheduler
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
      maxSurge: 1
  revisionHistoryLimit: 7
  progressDeadlineSeconds: 600
EOF

Ingress.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/dubbo-demo-consumer/Ingress.yaml << EOF
kind: Ingress
apiVersion: extensions/v1beta1
metadata:
  name: dubbo-demo-consumer
  namespace: prod
spec:
  rules:
  - host: demo-prod.od.com
    http:
      paths:
      - path: /
        backend:
          serviceName: dubbo-demo-consumer
          servicePort: 8080
EOF

service.yaml文件内容如下

[root@mfyxw50 ~]# cat > /data/k8s-yaml/prod/dubbo-demo-consumer/service.yaml << EOF
kind: Service
apiVersion: v1
metadata:
  name: dubbo-demo-consumer
  namespace: prod
spec:
  ports:
  - protocol: TCP
    port: 8080
    targetPort: 8080
  selector:
    app: dubbo-demo-consumer
  clusterIP: None
  type: ClusterIP
  sessionAffinity: None
EOF

(3)应用dubbo提供者和消费者资源配置清单

在master节点(mfyxw30.mfyxw.com或mfyxw40.mfyxw.com)任意一台节点上执行即可

[root@mfyxw30 ~]# kubectl get pod -n prod
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-dvlfx   1/1     Running   2          3d
apollo-configservice-5f6555448-7kj46   1/1     Running   2          3d
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/dubbo-demo-service/deployment.yaml
deployment.extensions/dubbo-demo-service created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/dubbo-demo-consumer/deployment.yaml
deployment.extensions/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/dubbo-demo-consumer/service.yaml
service/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl apply -f http://k8s-yaml.od.com/prod/dubbo-demo-consumer/Ingress.yaml
ingress.extensions/dubbo-demo-consumer created
[root@mfyxw30 ~]# 
[root@mfyxw30 ~]# kubectl get pod -n prod
NAME                                   READY   STATUS    RESTARTS   AGE
apollo-adminservice-5cccf97c64-dvlfx   1/1     Running   2          3d
apollo-configservice-5f6555448-7kj46   1/1     Running   2          3d
dubbo-demo-consumer-85c9c67947-f67nh   1/1     Running   0          16s
dubbo-demo-service-bf45dcbbb-qfrzs     1/1     Running   0          24s

16.登录dubbo-monitor查看

17.访问生产环境的dubbo消费者

在kubernetes集群里集成Apollo配置中心(6)之实战使用apollo分环境管理dubbo服务

码农公寓

生产实践

系统架构

(1)物理架构

1.添加域名解析

(1)添加DNS域名解析

(2)重启DNS服务

(3)测试域名解析

2.在k8s集群中创建名称空间以及连接私有仓库的secret

(1)在k8s集群中创建名称空间

(2)创建secret

3.我原环境已部署过portal,adminservice,configservice，我将先删除

4.分别导入各环境的数据库脚本以及授权

(1)test环境的数据库脚本如下(建议vi /root/apolloconfigtest.sql，再复制粘贴内容)：

(2)导入test环境的数据库脚本

(3)查看创建的数据库名称及表名

(4)修改ApolloConfigTestDB数据库的ServerConfig的Value

(5)对ApolloConfigTestDB数据库授权

(6)prod环境的数据库脚本如下(建议vi /root/apolloconfigprod.sql，再复制粘贴内容)：

(7)导入prod环境的数据库脚本

(8)查看创建的数据库名称及表名

(9)修改ApolloConfigProdDB数据库的ServerConfig的Value

(5)对ApolloConfigProdDB数据库授权

5.修改ApolloPortalDB中的ServerConfig的Value值

(1)查看原来ServerConfig的值

(2)更新ServerConfig的Value的值为fat,pro

(3)查看更新ServerConfig的ID为1的Value的值

6.修改apollo-portal的configmap.yaml资源配置清单并应用

(1)修改apollo-portal的configmap资源配置清单

(2)应用apollo-portal的configmap资源配置清单

7.创建资源配置清单

(1)创建资源配置清单存放目录

(2)创建test环境的apollo-configservice资源配置清单

(3)应用测试环境的apollo-configservice配置资源清单

(4)在浏览器访问config-test.od.com

(5)创建test环境的apollo-adminservice资源配置清单

(8)应用测试环境test的apollo-adminservice配置资源清单

(9)再次在浏览器访问config-test.od.com

(10)创建prod生产环境configservice资源配置清单

(11)创建prod生产环境adminservice资源配置清单

(12)创建prod生产环境configservice和adminservice资源配置清单

(13)在浏览器中访问config-prod.od.com

8.将portal应用起来

(1)对portal数据库的AppNamespace和App内容清空

(2)应用portal的deployment.yaml资源配置清单

(3)浏览portal.od.com，可以看到是一个没有任何项目的了

9.分别在portal中创建二个项目和新增配置项

(1)添加dubbo-demo-service提供者项目

(2)添加dubbo-demo-service提供者的配置并发布

(3)添加dubbo-demo-web消费者项目

(4)添加dubbo-demo-web消费者的配置并发布

10.构建测试环境的dubbo-demo-service镜像

11.交付测试环境的dubbo提供者

(1)创建测试环境的dubbo-demo-service资源配置清单

(2)应用测试环境的dubbo-demo-service资源配置清单

(3)修改dubbo-monitor的configmap

(4)登录dubbo-monitor查看下测试环境dubbo-demo-service

12.构建测试环境的dubbo消费都镜像

13.创建测试环境的dubbo消费者的资源配置清单并应用

(1)创建测试环境的dubbo消费者的资源配置清单

(2)应用测试环境的dubbo消费者的资源配置清单

(3)登录dubbo-monitor查看，dubbo-demo-consumer是否已经注册了

14.访问dubbo消费者

15.将测试环境的dubbo提供者和消费者交付到生产环境

(1)创建或修改dubbo提供者的资源配置清单

(2)创建或修改dubbo消费者的资源配置清单

(3)应用dubbo提供者和消费者资源配置清单

16.登录dubbo-monitor查看

17.访问生产环境的dubbo消费者

相关文章