(SQL SERVER) (ORACLE) (ACCESS)(POSTGRE SQL)四种数据库操作C#代码

将对这四种数据库的操作封装到了2个类中可以拷贝过去直接使用。

   public sealed class OleDbClass
{
#region private utility methods & constructors //Since this class provides only static methods, make the default constructor private to prevent
//instances from being created with "new SqlHelper()".
private OleDbClass() { } /// <summary>
/// This method is used to attach array of SqlParameters to a SqlCommand.
///
/// This method will assign a value of DbNull to any parameter with a direction of
/// InputOutput and a value of null.
///
/// This behavior will prevent default values from being used, but
/// this will be the less common case than an intended pure output parameter (derived as InputOutput)
/// where the user provided no input value.
/// </summary>
/// <param name="command">The command to which the parameters will be added</param>
/// <param name="commandParameters">an array of SqlParameters tho be added to command</param>
private static void AttachParameters(SqlCommand command, SqlParameter[] commandParameters)
{
foreach (SqlParameter p in commandParameters)
{
//check for derived output value with no value assigned
if ((p.Direction == ParameterDirection.InputOutput) && (p.Value == null))
{
p.Value = DBNull.Value;
} command.Parameters.Add(p);
}
} /// <summary>
/// This method assigns an array of values to an array of SqlParameters.
/// </summary>
/// <param name="commandParameters">array of SqlParameters to be assigned values</param>
/// <param name="parameterValues">array of objects holding the values to be assigned</param>
private static void AssignParameterValues(SqlParameter[] commandParameters, object[] parameterValues)
{
if ((commandParameters == null) || (parameterValues == null))
{
//do nothing if we get no data
return;
} // we must have the same number of values as we pave parameters to put them in
if (commandParameters.Length != parameterValues.Length)
{
throw new ArgumentException("Parameter count does not match Parameter Value count.");
} //iterate through the SqlParameters, assigning the values from the corresponding position in the
//value array
for (int i = 0, j = commandParameters.Length; i < j; i++)
{
commandParameters[i].Value = parameterValues[i];
}
} /// <summary>
/// This method opens (if necessary) and assigns a connection, transaction, command type and parameters
/// to the provided command.
/// </summary>
/// <param name="command">the SqlCommand to be prepared</param>
/// <param name="connection">a valid SqlConnection, on which to execute this command</param>
/// <param name="transaction">a valid SqlTransaction, or 'null'</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParameters to be associated with the command or 'null' if no parameters are required</param>
private static void PrepareCommand(SqlCommand command, SqlConnection connection, SqlTransaction transaction, CommandType commandType,
string commandText, SqlParameter[] commandParameters)
{
//if the provided connection is not open, we will open it
if (connection.State != ConnectionState.Open)
{
connection.Open();
} //associate the connection with the command
command.Connection = connection; //set the command text (stored procedure name or SQL statement)
command.CommandText = commandText; //if we were provided a transaction, assign it.
if (transaction != null)
{
command.Transaction = transaction;
} //set the command type
command.CommandType = commandType; //attach the command parameters if they are provided
if (commandParameters != null)
{
AttachParameters(command, commandParameters);
} return;
} #endregion private utility methods & constructors #region ExecuteNonQuery /// <summary>
/// Execute a SqlCommand (that returns no resultset and takes no parameters) against the database specified in
/// the connection string.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(connString, CommandType.StoredProcedure, "PublishOrders");
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(string connectionString, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteNonQuery(connectionString, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns no resultset) against the database specified in the connection string
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(connString, CommandType.StoredProcedure, "PublishOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(string connectionString, CommandType commandType, string commandText, params SqlParameter[] commandParameters)
{
//create & open a SqlConnection, and dispose of it after we are done.
using (SqlConnection cn = new SqlConnection(connectionString))
{
cn.Open(); //call the overload that takes a connection in place of the connection string
return ExecuteNonQuery(cn, commandType, commandText, commandParameters);
}
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns no resultset) against the database specified in
/// the connection string using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int result = ExecuteNonQuery(connString, "PublishOrders", 24, 36);
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored prcedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(string connectionString, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteNonQuery(connectionString, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns no resultset and takes no parameters) against the provided SqlConnection.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(conn, CommandType.StoredProcedure, "PublishOrders");
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlConnection connection, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteNonQuery(connection, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns no resultset) against the specified SqlConnection
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(conn, CommandType.StoredProcedure, "PublishOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlConnection connection, CommandType commandType, string commandText, params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters); //finally, execute the command.
int retval = cmd.ExecuteNonQuery(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns no resultset) against the specified SqlConnection
/// using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int result = ExecuteNonQuery(conn, "PublishOrders", 24, 36);
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlConnection connection, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteNonQuery(connection, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteNonQuery(connection, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns no resultset and takes no parameters) against the provided SqlTransaction.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(trans, CommandType.StoredProcedure, "PublishOrders");
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlTransaction transaction, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteNonQuery(transaction, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns no resultset) against the specified SqlTransaction
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int result = ExecuteNonQuery(trans, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlTransaction transaction, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters); //finally, execute the command.
int retval = cmd.ExecuteNonQuery(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns no resultset) against the specified
/// SqlTransaction using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int result = ExecuteNonQuery(conn, trans, "PublishOrders", 24, 36);
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an int representing the number of rows affected by the command</returns>
public static int ExecuteNonQuery(SqlTransaction transaction, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(transaction.Connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteNonQuery(transaction, CommandType.StoredProcedure, spName);
}
} #endregion ExecuteNonQuery #region ExecuteDataSet /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the database specified in
/// the connection string.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(connString, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(string connectionString, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteDataset(connectionString, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the database specified in the connection string
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(connString, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(string connectionString, CommandType commandType, string commandText,
 params SqlParameter[] commandParameters)
{
//create & open a SqlConnection, and dispose of it after we are done.
using (SqlConnection cn = new SqlConnection(connectionString))
{
cn.Open(); //call the overload that takes a connection in place of the connection string
return ExecuteDataset(cn, commandType, commandText, commandParameters);
}
} public static DataTable ExecuteDataset_oracle(string connectionString, CommandType commandType, string commandText)
{ DataTable Dt = new DataTable();
using (OracleConnection mConn = new OracleConnection(connectionString))
{ mConn.Open(); OracleCommand cmd = new OracleCommand(commandText, mConn); OracleDataAdapter dap = new OracleDataAdapter(cmd);
dap.Fill(Dt); mConn.Close();
}
return Dt;
} public static DataTable ExecuteDataset_PostgreSQL(string connectionString, CommandType commandType, string commandText)
{
DataTable Dt = new DataTable();
try
{
using (NpgsqlConnection mConn = new NpgsqlConnection(connectionString))
{ NpgsqlCommand comm = new NpgsqlCommand(commandText, mConn); mConn.Open(); NpgsqlDataAdapter sda = new NpgsqlDataAdapter();
sda.SelectCommand = comm; sda.Fill(Dt); mConn.Close();
}
}
catch (Exception)
{
return null;
}
return Dt; } public static int Execute_PostgreSQL(string connectionString, CommandType commandType, string commandText)
{
int ret;
try
{
using (NpgsqlConnection mConn = new NpgsqlConnection(connectionString))
{ NpgsqlCommand comm = new NpgsqlCommand(commandText, mConn);
try
{
mConn.Open();
}
catch
{
return -2;
}
ret = comm.ExecuteNonQuery();
mConn.Close();
}
}
catch (Exception)
{
return 0;
}
return ret;
} public static DataTable ExecuteDataset_oracle(string connectionString, string commandText)
{ DataTable Dt = new DataTable();
using (OracleConnection mConn = new OracleConnection(connectionString))
{ mConn.Open(); OracleCommand cmd = new OracleCommand(commandText, mConn); OracleDataAdapter dap = new OracleDataAdapter(cmd);
dap.Fill(Dt); mConn.Close();
}
return Dt;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the database specified in
/// the connection string using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// DataSet ds = ExecuteDataset(connString, "GetOrders", 24, 36);
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(string connectionString, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteDataset(connectionString, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteDataset(connectionString, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlConnection.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(conn, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlConnection connection, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteDataset(connection, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(conn, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlConnection connection, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters); //create the DataAdapter & DataSet
SqlDataAdapter da = new SqlDataAdapter(cmd);
DataSet ds = new DataSet(); //fill the DataSet using default values for DataTable names, etc.
da.Fill(ds); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear(); //return the dataset
return ds;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// DataSet ds = ExecuteDataset(conn, "GetOrders", 24, 36);
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlConnection connection, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteDataset(connection, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteDataset(connection, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlTransaction.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(trans, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlTransaction transaction, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteDataset(transaction, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlTransaction
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// DataSet ds = ExecuteDataset(trans, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlTransaction transaction, CommandType commandType, string commandText,
 params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters); //create the DataAdapter & DataSet
SqlDataAdapter da = new SqlDataAdapter(cmd);
DataSet ds = new DataSet(); //fill the DataSet using default values for DataTable names, etc.
da.Fill(ds); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear(); //return the dataset
return ds;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified
/// SqlTransaction using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// DataSet ds = ExecuteDataset(trans, "GetOrders", 24, 36);
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static DataSet ExecuteDataset(SqlTransaction transaction, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(transaction.Connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteDataset(transaction, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteDataset(transaction, CommandType.StoredProcedure, spName);
}
} #endregion ExecuteDataSet #region ExecuteReader /// <summary>
/// this enum is used to indicate whether the connection was provided by the caller, or created by SqlHelper, so that
/// we can set the appropriate CommandBehavior when calling ExecuteReader()
/// </summary>
private enum SqlConnectionOwnership
{
/// <summary>Connection is owned and managed by SqlHelper</summary>
Internal,
/// <summary>Connection is owned and managed by the caller</summary>
External
} /// <summary>
/// Create and prepare a SqlCommand, and call ExecuteReader with the appropriate CommandBehavior.
/// </summary>
/// <remarks>
/// If we created and opened the connection, we want the connection to be closed when the DataReader is closed.
///
/// If the caller provided the connection, we want to leave it to them to manage.
/// </remarks>
/// <param name="connection">a valid SqlConnection, on which to execute this command</param>
/// <param name="transaction">a valid SqlTransaction, or 'null'</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParameters to be associated with the command or 'null' if no parameters are required</param>
/// <param name="connectionOwnership">indicates whether the connection parameter was provided by the caller, or created by SqlHelper</param>
/// <returns>SqlDataReader containing the results of the command</returns>
private static SqlDataReader ExecuteReader(SqlConnection connection, SqlTransaction transaction, CommandType commandType,
string commandText, SqlParameter[] commandParameters, SqlConnectionOwnership connectionOwnership)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, connection, transaction, commandType, commandText, commandParameters); //create a reader
SqlDataReader dr; // call ExecuteReader with the appropriate CommandBehavior
if (connectionOwnership == SqlConnectionOwnership.External)
{
dr = cmd.ExecuteReader();
}
else
{
dr = cmd.ExecuteReader(CommandBehavior.CloseConnection);
} // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear(); return dr;
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the database specified in
/// the connection string.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(connString, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(string connectionString, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteReader(connectionString, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the database specified in the connection string
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(connString, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(string connectionString, CommandType commandType, string commandText,
 params SqlParameter[] commandParameters)
{
//create & open a SqlConnection
SqlConnection cn = new SqlConnection(connectionString);
cn.Open(); try
{
//call the private overload that takes an internally owned connection in place of the connection string
return ExecuteReader(cn, null, commandType, commandText, commandParameters, SqlConnectionOwnership.Internal);
}
catch
{
//if we fail to return the SqlDatReader, we need to close the connection ourselves
cn.Close();
throw;
}
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the database specified in
/// the connection string using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// SqlDataReader dr = ExecuteReader(connString, "GetOrders", 24, 36);
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(string connectionString, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteReader(connectionString, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteReader(connectionString, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlConnection.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(conn, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlConnection connection, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteReader(connection, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(conn, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlConnection connection, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//pass through the call to the private overload using a null transaction value and an externally owned connection
return ExecuteReader(connection, (SqlTransaction)null, commandType, commandText, commandParameters, SqlConnectionOwnership.External);
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// SqlDataReader dr = ExecuteReader(conn, "GetOrders", 24, 36);
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlConnection connection, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connection.ConnectionString, spName); AssignParameterValues(commandParameters, parameterValues); return ExecuteReader(connection, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteReader(connection, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlTransaction.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(trans, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlTransaction transaction, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteReader(transaction, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlTransaction
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// SqlDataReader dr = ExecuteReader(trans, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlTransaction transaction, CommandType commandType, string commandText,
 params SqlParameter[] commandParameters)
{
//pass through to private overload, indicating that the connection is owned by the caller
return ExecuteReader(transaction.Connection, transaction, commandType, commandText, commandParameters, SqlConnectionOwnership.External);
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified
/// SqlTransaction using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// SqlDataReader dr = ExecuteReader(trans, "GetOrders", 24, 36);
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a SqlDataReader containing the resultset generated by the command</returns>
public static SqlDataReader ExecuteReader(SqlTransaction transaction, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(transaction.Connection.ConnectionString, spName); AssignParameterValues(commandParameters, parameterValues); return ExecuteReader(transaction, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteReader(transaction, CommandType.StoredProcedure, spName);
}
} #endregion ExecuteReader #region ExecuteScalar /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset and takes no parameters) against the database specified in
/// the connection string.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(connString, CommandType.StoredProcedure, "GetOrderCount");
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(string connectionString, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteScalar(connectionString, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset) against the database specified in the connection string
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(connString, CommandType.StoredProcedure, "GetOrderCount", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(string connectionString, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create & open a SqlConnection, and dispose of it after we are done.
using (SqlConnection cn = new SqlConnection(connectionString))
{
cn.Open(); //call the overload that takes a connection in place of the connection string
return ExecuteScalar(cn, commandType, commandText, commandParameters);
}
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a 1x1 resultset) against the database specified in
/// the connection string using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int orderCount = (int)ExecuteScalar(connString, "GetOrderCount", 24, 36);
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(string connectionString, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteScalar(connectionString, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteScalar(connectionString, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset and takes no parameters) against the provided SqlConnection.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(conn, CommandType.StoredProcedure, "GetOrderCount");
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlConnection connection, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteScalar(connection, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset) against the specified SqlConnection
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(conn, CommandType.StoredProcedure, "GetOrderCount", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlConnection connection, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters); //execute the command & return the results
object retval = cmd.ExecuteScalar(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval; } /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a 1x1 resultset) against the specified SqlConnection
/// using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int orderCount = (int)ExecuteScalar(conn, "GetOrderCount", 24, 36);
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlConnection connection, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteScalar(connection, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteScalar(connection, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset and takes no parameters) against the provided SqlTransaction.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(trans, CommandType.StoredProcedure, "GetOrderCount");
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlTransaction transaction, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteScalar(transaction, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a 1x1 resultset) against the specified SqlTransaction
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// int orderCount = (int)ExecuteScalar(trans, CommandType.StoredProcedure, "GetOrderCount", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlTransaction transaction, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters); //execute the command & return the results
object retval = cmd.ExecuteScalar(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a 1x1 resultset) against the specified
/// SqlTransaction using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// int orderCount = (int)ExecuteScalar(trans, "GetOrderCount", 24, 36);
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an object containing the value in the 1x1 resultset generated by the command</returns>
public static object ExecuteScalar(SqlTransaction transaction, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(transaction.Connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteScalar(transaction, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteScalar(transaction, CommandType.StoredProcedure, spName);
}
} #endregion ExecuteScalar #region ExecuteXmlReader /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlConnection.
/// </summary>
/// <remarks>
/// e.g.:
/// XmlReader r = ExecuteXmlReader(conn, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command using "FOR XML AUTO"</param>
/// <returns>an XmlReader containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlConnection connection, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteXmlReader(connection, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// XmlReader r = ExecuteXmlReader(conn, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command using "FOR XML AUTO"</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an XmlReader containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlConnection connection, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, connection, (SqlTransaction)null, commandType, commandText, commandParameters); //create the DataAdapter & DataSet
XmlReader retval = cmd.ExecuteXmlReader(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval; } /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified SqlConnection
/// using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// XmlReader r = ExecuteXmlReader(conn, "GetOrders", 24, 36);
/// </remarks>
/// <param name="connection">a valid SqlConnection</param>
/// <param name="spName">the name of the stored procedure using "FOR XML AUTO"</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>an XmlReader containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlConnection connection, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteXmlReader(connection, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteXmlReader(connection, CommandType.StoredProcedure, spName);
}
} /// <summary>
/// Execute a SqlCommand (that returns a resultset and takes no parameters) against the provided SqlTransaction.
/// </summary>
/// <remarks>
/// e.g.:
/// XmlReader r = ExecuteXmlReader(trans, CommandType.StoredProcedure, "GetOrders");
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command using "FOR XML AUTO"</param>
/// <returns>an XmlReader containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlTransaction transaction, CommandType commandType, string commandText)
{
//pass through the call providing null for the set of SqlParameters
return ExecuteXmlReader(transaction, commandType, commandText, (SqlParameter[])null);
} /// <summary>
/// Execute a SqlCommand (that returns a resultset) against the specified SqlTransaction
/// using the provided parameters.
/// </summary>
/// <remarks>
/// e.g.:
/// XmlReader r = ExecuteXmlReader(trans, CommandType.StoredProcedure, "GetOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="commandType">the CommandType (stored procedure, text, etc.)</param>
/// <param name="commandText">the stored procedure name or T-SQL command using "FOR XML AUTO"</param>
/// <param name="commandParameters">an array of SqlParamters used to execute the command</param>
/// <returns>an XmlReader containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlTransaction transaction, CommandType commandType, string commandText,
params SqlParameter[] commandParameters)
{
//create a command and prepare it for execution
SqlCommand cmd = new SqlCommand();
PrepareCommand(cmd, transaction.Connection, transaction, commandType, commandText, commandParameters); //create the DataAdapter & DataSet
XmlReader retval = cmd.ExecuteXmlReader(); // detach the SqlParameters from the command object, so they can be used again.
cmd.Parameters.Clear();
return retval;
} /// <summary>
/// Execute a stored procedure via a SqlCommand (that returns a resultset) against the specified
/// SqlTransaction using the provided parameter values. This method will query the database to discover the parameters for the
/// stored procedure (the first time each stored procedure is called), and assign the values based on parameter order.
/// </summary>
/// <remarks>
/// This method provides no access to output parameters or the stored procedure's return value parameter.
///
/// e.g.:
/// XmlReader r = ExecuteXmlReader(trans, "GetOrders", 24, 36);
/// </remarks>
/// <param name="transaction">a valid SqlTransaction</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="parameterValues">an array of objects to be assigned as the input values of the stored procedure</param>
/// <returns>a dataset containing the resultset generated by the command</returns>
public static XmlReader ExecuteXmlReader(SqlTransaction transaction, string spName, params object[] parameterValues)
{
//if we receive parameter values, we need to figure out where they go
if ((parameterValues != null) && (parameterValues.Length > 0))
{
//pull the parameters for this stored procedure from the parameter cache (or discover them & populate the cache)
SqlParameter[] commandParameters = SqlParameterClass.GetSpParameterSet(transaction.Connection.ConnectionString, spName); //assign the provided values to these parameters based on parameter order
AssignParameterValues(commandParameters, parameterValues); //call the overload that takes an array of SqlParameters
return ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName, commandParameters);
}
//otherwise we can just call the SP without params
else
{
return ExecuteXmlReader(transaction, CommandType.StoredProcedure, spName);
}
} #endregion ExecuteXmlReader public static int OleDbExecuteNonQuery(string connectionString, string commandText)
{
//create & open a SqlConnection, and dispose of it after we are done.
using (OleDbConnection cn = new OleDbConnection(connectionString))
{
try
{
cn.Open();
}
catch (Exception)
{ return -1;
}
OleDbCommand myCommand = new OleDbCommand(commandText, cn);
int ret=myCommand.ExecuteNonQuery();
cn.Close();
return ret;
//call the overload that takes a connection in place of the connection string }
}
public static DataSet OleDbExecuteDataset(string connectionString, string commandText)
{
//create & open a SqlConnection, and dispose of it after we are done.
using (OleDbConnection cn = new OleDbConnection(connectionString))
{
try
{
cn.Open();
OleDbCommand myCommand = new OleDbCommand(commandText, cn);
OleDbDataAdapter da = new OleDbDataAdapter(myCommand);
DataSet ds = new DataSet(); //fill the DataSet using default values for DataTable names, etc.
da.Fill(ds); // detach the SqlParameters from the command object, so they can be used again.
myCommand.Parameters.Clear(); //return the dataset
cn.Close();
return ds; //call the overload that takes a connection in place of the connection string
}
catch (Exception)
{
cn.Close();
return null;
}
}
}
}
  public sealed class SqlParameterClass
{
#region private methods, variables, and constructors //Since this class provides only static methods, make the default constructor private to prevent
//instances from being created with "new SqlServerClass()".
private SqlParameterClass() { } private static Hashtable paramCache = Hashtable.Synchronized(new Hashtable()); /// <summary>
/// resolve at run time the appropriate set of SqlParameters for a stored procedure
/// </summary>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="includeReturnValueParameter">whether or not to include their return value parameter</param>
/// <returns></returns>
private static SqlParameter[] DiscoverSpParameterSet(string connectionString, string spName, bool includeReturnValueParameter)
{
using (SqlConnection cn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand(spName, cn))
{
cn.Open();
cmd.CommandType = CommandType.StoredProcedure; SqlCommandBuilder.DeriveParameters(cmd); if (!includeReturnValueParameter)
{
cmd.Parameters.RemoveAt(0);
} SqlParameter[] discoveredParameters = new SqlParameter[cmd.Parameters.Count]; ; cmd.Parameters.CopyTo(discoveredParameters, 0); return discoveredParameters;
}
} //deep copy of cached SqlParameter array
private static SqlParameter[] CloneParameters(SqlParameter[] originalParameters)
{
SqlParameter[] clonedParameters = new SqlParameter[originalParameters.Length]; for (int i = 0, j = originalParameters.Length; i < j; i++)
{
clonedParameters[i] = (SqlParameter)((ICloneable)originalParameters[i]).Clone();
} return clonedParameters;
} #endregion private methods, variables, and constructors #region caching functions /// <summary>
/// add parameter array to the cache
/// </summary>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <param name="commandParameters">an array of SqlParamters to be cached</param>
public static void CacheParameterSet(string connectionString, string commandText, params SqlParameter[] commandParameters)
{
string hashKey = connectionString + ":" + commandText; paramCache[hashKey] = commandParameters;
} /// <summary>
/// retrieve a parameter array from the cache
/// </summary>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="commandText">the stored procedure name or T-SQL command</param>
/// <returns>an array of SqlParamters</returns>
public static SqlParameter[] GetCachedParameterSet(string connectionString, string commandText)
{
string hashKey = connectionString + ":" + commandText; SqlParameter[] cachedParameters = (SqlParameter[])paramCache[hashKey]; if (cachedParameters == null)
{
return null;
}
else
{
return CloneParameters(cachedParameters);
}
} #endregion caching functions #region Parameter Discovery Functions /// <summary>
/// Retrieves the set of SqlParameters appropriate for the stored procedure
/// </summary>
/// <remarks>
/// This method will query the database for this information, and then store it in a cache for future requests.
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <returns>an array of SqlParameters</returns>
public static SqlParameter[] GetSpParameterSet(string connectionString, string spName)
{
return GetSpParameterSet(connectionString, spName, false);
} /// <summary>
/// Retrieves the set of SqlParameters appropriate for the stored procedure
/// </summary>
/// <remarks>
/// This method will query the database for this information, and then store it in a cache for future requests.
/// </remarks>
/// <param name="connectionString">a valid connection string for a SqlConnection</param>
/// <param name="spName">the name of the stored procedure</param>
/// <param name="includeReturnValueParameter">a bool value indicating whether the return value parameter should be included in the results</param>
/// <returns>an array of SqlParameters</returns>
public static SqlParameter[] GetSpParameterSet(string connectionString, string spName, bool includeReturnValueParameter)
{
string hashKey = connectionString + ":" + spName + (includeReturnValueParameter ? ":include ReturnValue Parameter" : ""); SqlParameter[] cachedParameters; cachedParameters = (SqlParameter[])paramCache[hashKey]; if (cachedParameters == null)
{
cachedParameters = (SqlParameter[])(paramCache[hashKey] = DiscoverSpParameterSet(connectionString, spName, includeReturnValueParameter));
} return CloneParameters(cachedParameters);
} #endregion Parameter Discovery Functions
}
上一篇:[java] DOS编译 .java 文件得到 .class 文件 并执行 以及使用外部 .jar包 时的命令


下一篇:php排序方法之冒泡排序