MHA自动故障切换过程中，MHA试图从宕机的主服务器上保存二进制日志，最大程度的保证数据的不丢失，但 这并不总是可行的。例如，如果主服务器硬件故障或无法通过ssh访问，MHA没法保存二进制日志，只进行故 障转移而丢失了最新的数据。使用MySQL 5.5的半同步复制，可以大大降低数据丢失的风险。MHA可以与半同 步复制结合起来。如果只有一个slave已经收到了最新的二进制日志，MHA可以将最新的二进制日志应用于其他 所有的slave服务器上，因此可以保证所有节点的数据一致性。
注：从MySQL5.5开始，MySQL以插件的形式支持半同步复制。
如何理解半同步呢？
首先我们来看看异步，全同步的概念： 异步复制（Asynchronous replication） MySQL默 认的复制即是异步的，主库在执行完客户端提交的事务后会立即将结果返给给客户端，并不关心从库是否已经 接收并处理，这样就会有一个问题，主如果crash掉了，此时主上已经提交的事务可能并没有传到从上，如果此 时，强行将从提升为主，可能导致新主上的数据不完整。 全同步复制（Fully synchronous replication） 指当主 库执行完一个事务，所有的从库都执行了该事务才返回给客户端。因为需要等待所有从库执行完该事务才能返 回，所以全同步复制的性能必然会收到严重的影响。 半同步复制（Semisynchronous replication） 介于异步复 制和全同步复制之间，主库在执行完客户端提交的事务后不是立刻返回给客户端，而是等待至少一个从库接收 到并写到relay log中才返回给客户端。相对于异步复制，半同步复制提高了数据的安全性，同时它也造成了一 定程度的延迟，这个延迟最少是一个TCP/IP往返的时间。所以，半同步复制最好在低延时的网络中使用。
总结：异步与半同步异同 默认情况下MySQL的复制是异步的，Master上所有的更新操作写入Binlog之后 并不确保所有的更新都被复制到Slave之上。异步操作虽然效率高，但是在Master/Slave出现问题的时 候，存在很高数据不同步的风险，甚至可能丢失数据。 MySQL5.5引入半同步复制功能的目的是为了保 证在master出问题的时候，至少有一台Slave的数据是完整的。在超时的情况下也可以临时转入异步复 制，保障业务的正常使用，直到一台salve追赶上之后，继续切换到半同步模式。
工作原理 相较于其它HA软件，MHA的目的在于维持MySQL Replication中Master库的高可用性，其最大特点是 可以修复多个Slave之间的差异日志，最终使所有Slave保持数据一致，然后从中选择一个充当新的Master，并 将其它Slave指向它。 -从宕机崩溃的master保存二进制日志事件(binlogevents)。 -识别含有最新更新的slave。 -应用差异的中继日志(relay log)到其它slave。 -应用从master保存的二进制日志事件(binlogevents)。 -提升一 个slave为新master。 -使其它的slave连接新的master进行复制。
目前MHA主要支持一主多从的架构，要搭建MHA,要求一个复制集群中必须最少有三台数据库服务器，一主二 从，即一台充当master，一台充当备用master，另外一台充当从库，因为至少需要三台服务器。
其中master对外提供写服务，备选master（实际的slave，主机名slave1）提供读服务，slave也提供相关的读 服务，一旦master宕机，将会把备选master提升为新的master，slave指向新的master，manager作为管理服务 器。
一、开始部署
注：时间要同步
#在四台机器都配置epel源
[root@manager ~]# wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo#建立ssh无交互登录环境
#Manager主机：
[root@manager ~]# ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Created directory ‘/root/.ssh‘.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
1c:cb:2d:4f:b1:80:ea:80:35:3b:89:48:5f:09:eb:2e root@manager
The key‘s randomart image is:
+--[ RSA 2048]----+
| . |
| o .. |
| .o. o. o . |
|o+o+.. o = o |
|+ =o. S + |
| .+ + |
| E .. . |
| . |
| |
+-----------------+
[root@manager ~]# for i in manager master slave1 slave2;do ssh-copy-id -i $i;done # 分发到其他主机
#master主机
[root@master ~]# ssh-keygen -t rsa
[root@master ~]# for i in manager master slave1 slave2;do ssh-copy-id -i $i;done
#slave1主机
[root@slave1 ~]# ssh-keygen -t rsa
[root@slave1 ~]# for i in manager master slave1 slave2;do ssh-copy-id -i $i;done
#slave2主机
[root@slave2 ~]# ssh-keygen -t rsa
[root@slave2 ~]# for i in manager master slave1 slave2;do ssh-copy-id -i $i;done测试ssh无交互登录
[root@manager ~]# for i in master manager slave1 slave2;do ssh $i hostname;done
master
manager
slave1
slave2
[root@manager ~]# ssh master
Last failed login: Thu Jul 2 17:05:01 CST 2020 from 192.168.171.150 on ssh:notty
There was 1 failed login attempt since the last successful login.
Last login: Thu Jul 2 16:57:27 2020 from 192.168.171.1
[root@master ~]# ssh slave1
Last login: Thu Jul 2 17:02:59 2020 from 192.168.171.1
[root@slave1 ~]# ssh slave2
Last login: Thu Jul 2 17:03:29 2020 from 192.168.171.1
#配置hosts环境
[root@manager ~]# vim /etc/hosts
192.168.171.150 manager
192.168.171.151 master
192.168.171.152 slave1
192.168.171.153 slave2
[root@manager ~]# scp /etc/hosts root@192.168.171.151:/etc/
[root@manager ~]# scp /etc/hosts root@192.168.171.152:/etc/
[root@manager ~]# scp /etc/hosts root@192.168.171.153:/etc/二、配置mysql半同步复制
为了尽可能的减少主库硬件损坏宕机造成的数据丢失，因此在配置MHA的同时建议 配置成MySQL的半同步复制。
**注：**mysql半同步插件是由谷歌提供，具体位置/usr/local/mysql/lib/plugin/下：
一个是master用的semisync_master.so；
一个是slave用的semisync_slave.so；分别在主从节点上安装相关的插件（master, Candicate master,slave）
#检测数据库是否支持动态载入
mysql>show variables like ‘%have_dynamic%‘;
+----------------------+-------+
| Variable_name | Value |
+----------------------+-------+
| have_dynamic_loading | YES | # 显示yes表示支持
+----------------------+-------+
1 row in set (0.00 sec)
#所有mysql数据库服务器，安装半同步插件(semisync_master.so,semisync_slave.so)
#要切记是所有mysql数据库服务器上都需要安装，这里我就在这写了一台该怎么安装
mysql>INSTALL PLUGIN rpl_semi_sync_master SONAME ‘semisync_master.so‘;
Query OK, 0 rows affected (0.01 sec)
mysql>INSTALL PLUGIN rpl_semi_sync_slave SONAME ‘semisync_slave.so‘;
Query OK, 0 rows affected (0.00 sec)
#检查Plugin是否已正确安装
mysql> show plugins; # 可以再最后两行看到如下内容
| rpl_semi_sync_master | ACTIVE | REPLICATION | semisync_master.so | GPL |
| rpl_semi_sync_slave | ACTIVE | REPLICATION | semisync_slave.so | GPL |
#也可以使用如下命令检查
mysql>select * from information_schema.plugins;
#查看半同步相关信息
mysql>show variables like ‘%rpl_semi_sync%‘;
+-------------------------------------------+------------+
| Variable_name | Value |
+-------------------------------------------+------------+
| rpl_semi_sync_master_enabled | OFF |
| rpl_semi_sync_master_timeout | 10000 |
| rpl_semi_sync_master_trace_level | 32 |
| rpl_semi_sync_master_wait_for_slave_count | 1 |
| rpl_semi_sync_master_wait_no_slave | ON |
| rpl_semi_sync_master_wait_point | AFTER_SYNC |
| rpl_semi_sync_slave_enabled | OFF |
| rpl_semi_sync_slave_trace_level | 32 |
+-------------------------------------------+------------+
8 rows in set (0.00 sec)
#上方所示内容可以看到半同复制插件已经成功安装，只是还没有启用，所以是off修改my.cnf文件，配置主从同步
注：若主MYSQL服务器已经存在，只是后期才搭建从MYSQL服务器，在置配数据同步前应先将主 MYSQL服务器的要同步的数据库拷贝到从MYSQL服务器上（如先在主MYSQL上备份数据库，再用备份 在从MYSQL服务器上恢复）
#master主机
[root@master ~]# vim /etc/my.cnf
server-id = 1
log-bin = mysql-bin
binlog_format = mixed
log-bin-index = mysql-bin.index
rpl_semi_sync_master_enabled = 1 # 1表示启用，0表示关闭，slave同样
rpl_semi_sync_master_timeout = 1000 # 毫秒单位，主服务器等待确认消息10秒后，不在等待，变为异步方式
rpl_semi_sync_slave_enabled = 1
relay_log_purge = 0
relay-log = relay-bin
relay-log-index = slave-relay-bin.index
#candicate master主机
[root@slave1 ~]# vim /etc/my.cnf
server-id = 2
log-bin = mysql-bin
binlog_format = mixed
log-bin-index = mysql-bin.index
relay_log_purge = 0 # 0表示禁止 SQL 线程在执行完一个 relay log 后自动将其删除，对于MHA场景下，对 于某些滞后从库的恢复依赖于其他从库的relay log，因此采取禁用自动删除功能
relay-log = relay-bin
relay-log-index = slave-relay-bin.index
rpl_semi_sync_master_enabled = 1
rpl_semi_sync_master_timeout = 10000
rpl_semi_sync_slave_enabled = 1
#salve2主机
Server-id = 3
log-bin = mysql-bin
relay-log = relay-bin
relay-log-index = slave-relay-bin.index
read_only = 1
rpl_semi_sync_slave_enabled = 1
#查看半同步相关信息
mysql> show variables like ‘%rpl_semi_sync%‘;
+-------------------------------------------+------------+
| Variable_name | Value |
+-------------------------------------------+------------+
| rpl_semi_sync_master_enabled | ON |
| rpl_semi_sync_master_timeout | 10000 |
| rpl_semi_sync_master_trace_level | 32 |
| rpl_semi_sync_master_wait_for_slave_count | 1 |
| rpl_semi_sync_master_wait_no_slave | ON |
| rpl_semi_sync_master_wait_point | AFTER_SYNC |
| rpl_semi_sync_slave_enabled | ON |
| rpl_semi_sync_slave_trace_level | 32 |
+-------------------------------------------+------------+
8 rows in set (0.00 sec)
#查看半同步状态
mysql> show status like ‘%rpl_semi_sync%‘;
+--------------------------------------------+-------+
| Variable_name | Value |
+--------------------------------------------+-------+
| Rpl_semi_sync_master_clients | 0 |
| Rpl_semi_sync_master_net_avg_wait_time | 0 |
| Rpl_semi_sync_master_net_wait_time | 0 |
| Rpl_semi_sync_master_net_waits | 0 |
| Rpl_semi_sync_master_no_times | 0 |
| Rpl_semi_sync_master_no_tx | 0 |
| Rpl_semi_sync_master_status | ON |
| Rpl_semi_sync_master_timefunc_failures | 0 |
| Rpl_semi_sync_master_tx_avg_wait_time | 0 |
| Rpl_semi_sync_master_tx_wait_time | 0 |
| Rpl_semi_sync_master_tx_waits | 0 |
| Rpl_semi_sync_master_wait_pos_backtraverse | 0 |
| Rpl_semi_sync_master_wait_sessions | 0 |
| Rpl_semi_sync_master_yes_tx | 0 |
| Rpl_semi_sync_slave_status | OFF |
+--------------------------------------------+-------+
15 rows in set (0.00 sec)
#有几个状态参数值得关注的：
<< rpl_semi_sync_master_status ：显示主服务是异步复制模式还是半同步复制模式
<< rpl_semi_sync_master_clients ：显示有多少个从服务器配置为半同步复制模式
<< rpl_semi_sync_master_yes_tx ：显示从服务器确认成功提交的数量
<< rpl_semi_sync_master_no_tx ：显示从服务器确认不成功提交的数量
<< rpl_semi_sync_master_tx_avg_wait_time ：事务因开启 semi_sync ，平均需要额外等待的时间
<< rpl_semi_sync_master_net_avg_wait_time ：事务进入等待队列后，到网络平均等待时间
#master主机：
mysql> grant replication slave on *.* to mharep@‘192.168.171.%‘ identified by ‘123‘; # 创建一个用于主从复制的帐号，在master和candicate master的主机上创建即可
mysql> grant all privileges on *.* to manager@‘192.168.171.%‘ identified by ‘123‘; # 创建MHA管理账号，所有mysql服务器上都需要
mysql> show master status;
+------------------+----------+--------------+------------------+-------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+------------------+----------+--------------+------------------+-------------------+
| mysql-bin.000002 | 746 | | | |
+------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)
#Candicate master主机：
mysql> grant replication slave on *.* to mharep@‘192.168.171.%‘ identified by ‘123‘;
mysql> grant all privileges on *.* to manager@‘192.168.171.%‘ identified by ‘123‘;
mysql> change master to master_host=‘192.168.171.151‘,master_port=3306,master_user=‘mharep‘,master_password=‘123‘,master_log_file=‘mysql-bin.000001‘,master_log_pos=746;
mysql> start slave;
#slave主机：
mysql> grant all privileges on *.* to manager@‘192.168.171.%‘ identified by ‘123‘;
mysql> change master to master_host=‘192.168.171.151‘,master_port=3306,master_user=‘mharep‘,master_password=‘123‘,master_log_file=‘mysql-bin.000001‘,master_log_pos=746;
mysql> start slave;查看Candicate master和slave2 两个从服务器的状态
#查看master服务器的半同步状态
mysql> show status like ‘%rpl_semi_sync%‘;
+--------------------------------------------+-------+
| Variable_name | Value |
+--------------------------------------------+-------+
| Rpl_semi_sync_master_clients | 2 |
| Rpl_semi_sync_master_net_avg_wait_time | 0 |
| Rpl_semi_sync_master_net_wait_time | 0 |
| Rpl_semi_sync_master_net_waits | 0 |
| Rpl_semi_sync_master_no_times | 0 |
| Rpl_semi_sync_master_no_tx | 0 |
| Rpl_semi_sync_master_status | ON |
| Rpl_semi_sync_master_timefunc_failures | 0 |
| Rpl_semi_sync_master_tx_avg_wait_time | 0 |
| Rpl_semi_sync_master_tx_wait_time | 0 |
| Rpl_semi_sync_master_tx_waits | 0 |
| Rpl_semi_sync_master_wait_pos_backtraverse | 0 |
| Rpl_semi_sync_master_wait_sessions | 0 |
| Rpl_semi_sync_master_yes_tx | 0 |
| Rpl_semi_sync_slave_status | OFF |
+--------------------------------------------+-------+
15 rows in set (0.00 sec)三、配置mysql-mha mha包括manager节点和data节点
#在所有主机上安装mha所依赖的软 件包（需要系统自带的yum源并联网）
[root@manager ~]# yum -y install perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-ParallelForkManager perl-Config-IniFiles ncftp perl-Params-Validate perl-CPAN perl-TestMock-LWP.noarch perl-LWP-Authen-Negotiate.noarch perl-devel perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker以下操作管理节点需要两个都安装， 在3台数据库节点只要安装MHA的node节点
软件下载
#在所有数据库节点上安装node节点
[root@slave1 ~]# tar zxf mha4mysql-node-0.58.tar.gz
[root@slave1 ~]# cd mha4mysql-node-0.58/
[root@slave1 mha4mysql-node-0.58]# perl Makefile.PL
*** Module::AutoInstall version 1.06
*** Checking for Perl dependencies...
[Core Features]
- DBI ...loaded. (1.627)
- DBD::mysql ...loaded. (4.023)
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Writing Makefile for mha4mysql::node
[root@slave1 mha4mysql-node-0.58]# make && make install
#这里我就忽略其他两个数据库安装node了，步骤都一样#管理节点两个都需要安装
[root@manager ~]# tar zxf mha4mysql-node-0.58.tar.gz
[root@manager ~]# cd mha4mysql-node-0.58/
[root@manager mha4mysql-node-0.58]# perl Makefile.PL
[root@manager mha4mysql-node-0.58]# make && make install
#安装manager包
[root@manager ~]# tar zxf mha4mysql-manager-0.58.tar.gz
[root@manager ~]# cd mha4mysql-manager-0.58/
[root@manager mha4mysql-manager-0.58]# perl Makefile.PL
*** Module::AutoInstall version 1.06
*** Checking for Perl dependencies...
[Core Features]
- DBI ...loaded. (1.627)
- DBD::mysql ...loaded. (4.023)
- Time::HiRes ...loaded. (1.9725)
- Config::Tiny ...loaded. (2.14)
- Log::Dispatch ...loaded. (2.41)
- Parallel::ForkManager ...missing.
- MHA::NodeConst ...loaded. (0.58)
==> Auto-install the 1 mandatory module(s) from CPAN? [y] y
*** Dependencies will be installed the next time you type ‘make‘.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Warning: prerequisite Parallel::ForkManager 0 not found.
Writing Makefile for mha4mysql::manager
[root@manager mha4mysql-manager-0.58]# make && make install # 根据提示输入[root@manager ~]# mkdir /etc/masterha
[root@manager ~]# mkdir -p /masterha/app1
[root@manager ~]# mkdir /scripts
[root@manager ~]# cd mha4mysql-manager-0.58/
[root@manager mha4mysql-manager-0.58]# cp samples/conf/* /etc/masterha/
[root@manager mha4mysql-manager-0.58]# cp samples/scripts/* /scripts/编辑MHA配置文件
[root@manager ~]# vim /etc/masterha/app1.cnf
[server default]
manager_workdir=/masterha/app1 # 设置manager的工作目录
manager_log=/masterha/app1/manager.log # 设置manager的日志
user=manager # 设置监控用户
password=123 # 监控用户的密码
ssh_user=root # ssh连接用户
repl_user=mharep # 主从复制用户
repl_password=123 # 主从复制用户密码
ping_interval=1 # 设置监控主库，发送ping包的时间间隔，默认 是3秒
[server1]
hostname=192.168.171.151
port=3306
master_binlog_dir=/usr/local/mysql/data
candidate_master=1 # 设置为候选master，如果设置该参数以后，发生主从切换以后将会将此从库提升为主库
[server2]
hostname=192.168.171.152
port=3306
master_binlog_dir=/usr/local/mysql/data
candidate_master=1
[server3]
hostname=192.168.171.153
port=3306
master_binlog_dir=/usr/local/mysql/data
no_master=1SSH有效性验证
[root@manager ~]# masterha_check_ssh --global_conf=/etc/masterha/masterha_default.cnf --conf=/etc/masterha/app1.cnf
集群复制的有效性验证（mysql必须都启动）
[root@manager ~]# masterha_check_repl -global_conf=/etc/masterha/masterha_default.cnf --conf=/etc/masterha/app1.cnf
Thu Jul 2 19:20:58 2020 - [info] Reading default configuration from /etc/masterha/masterha_default.cnf..
Thu Jul 2 19:20:58 2020 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Thu Jul 2 19:20:58 2020 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Thu Jul 2 19:20:58 2020 - [info] MHA::MasterMonitor version 0.58.
Thu Jul 2 19:20:59 2020 - [info] GTID failover mode = 0
Thu Jul 2 19:20:59 2020 - [info] Dead Servers:
Thu Jul 2 19:20:59 2020 - [info] Alive Servers:
Thu Jul 2 19:20:59 2020 - [info] 192.168.171.151(192.168.171.151:3306)
Thu Jul 2 19:20:59 2020 - [info] 192.168.171.152(192.168.171.152:3306)
Thu Jul 2 19:20:59 2020 - [info] 192.168.171.153(192.168.171.153:3306)
Thu Jul 2 19:20:59 2020 - [info] Alive Slaves:
Thu Jul 2 19:20:59 2020 - [info] 192.168.171.152(192.168.171.152:3306) Version=5.7.22-log (oldest major version between slaves) log-bin:enabled
Thu Jul 2 19:20:59 2020 - [info] Replicating from 192.168.171.151(192.168.171.151:3306)
Thu Jul 2 19:20:59 2020 - [info] Primary candidate for the new Master (candidate_master is set)
Thu Jul 2 19:20:59 2020 - [info] 192.168.171.153(192.168.171.153:3306) Version=5.7.22-log (oldest major version between slaves) log-bin:enabled
Thu Jul 2 19:20:59 2020 - [info] Replicating from 192.168.171.151(192.168.171.151:3306)
Thu Jul 2 19:20:59 2020 - [info] Not candidate for the new Master (no_master is set)
Thu Jul 2 19:20:59 2020 - [info] Current Alive Master: 192.168.171.151(192.168.171.151:3306)
Thu Jul 2 19:20:59 2020 - [info] Checking slave configurations..
Thu Jul 2 19:20:59 2020 - [info] read_only=1 is not set on slave 192.168.171.152(192.168.171.152:3306).
Thu Jul 2 19:20:59 2020 - [warning] relay_log_purge=0 is not set on slave 192.168.171.153(192.168.171.153:3306).
Thu Jul 2 19:20:59 2020 - [info] Checking replication filtering settings..
Thu Jul 2 19:20:59 2020 - [info] binlog_do_db= , binlog_ignore_db=
Thu Jul 2 19:20:59 2020 - [info] Replication filtering check ok.
Thu Jul 2 19:20:59 2020 - [info] GTID (with auto-pos) is not supported
Thu Jul 2 19:20:59 2020 - [info] Starting SSH connection tests..
Thu Jul 2 19:21:00 2020 - [info] All SSH connection tests passed successfully.
Thu Jul 2 19:21:00 2020 - [info] Checking MHA Node version..
Thu Jul 2 19:21:01 2020 - [info] Version check ok.
Thu Jul 2 19:21:01 2020 - [info] Checking SSH publickey authentication settings on the current master..
Thu Jul 2 19:21:01 2020 - [info] HealthCheck: SSH to 192.168.171.151 is reachable.
Thu Jul 2 19:21:01 2020 - [info] Master MHA Node version is 0.58.
Thu Jul 2 19:21:01 2020 - [info] Checking recovery script configurations on 192.168.171.151(192.168.171.151:3306)..
Thu Jul 2 19:21:01 2020 - [info] Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/usr/local/mysql/data --output_file=/var/tmp/save_binary_logs_test --manager_version=0.58 --start_file=mysql-bin.000003
Thu Jul 2 19:21:01 2020 - [info] Connecting to root@192.168.171.151(192.168.171.151:22)..
Creating /var/tmp if not exists.. ok.
Checking output directory is accessible or not..
ok.
Binlog found at /usr/local/mysql/data, up to mysql-bin.000003
Thu Jul 2 19:21:01 2020 - [info] Binlog setting check done.
Thu Jul 2 19:21:01 2020 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Thu Jul 2 19:21:01 2020 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user=‘manager‘ --slave_host=192.168.171.152 --slave_ip=192.168.171.152 --slave_port=3306 --workdir=/var/tmp --target_version=5.7.22-log --manager_version=0.58 --relay_log_info=/usr/local/mysql/data/relay-log.info --relay_dir=/usr/local/mysql/data/ --slave_pass=xxx
Thu Jul 2 19:21:01 2020 - [info] Connecting to root@192.168.171.152(192.168.171.152:22)..
Checking slave recovery environment settings..
Opening /usr/local/mysql/data/relay-log.info ... ok.
Relay log found at /usr/local/mysql/data, up to relay-bin.000002
Temporary relay log file is /usr/local/mysql/data/relay-bin.000002
Checking if super_read_only is defined and turned on.. not present or turned off, ignoring.
Testing mysql connection and privileges..
mysql: [Warning] Using a password on the command line interface can be insecure.
done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Thu Jul 2 19:21:01 2020 - [info] Executing command : apply_diff_relay_logs --command=test --slave_user=‘manager‘ --slave_host=192.168.171.153 --slave_ip=192.168.171.153 --slave_port=3306 --workdir=/var/tmp --target_version=5.7.22-log --manager_version=0.58 --relay_log_info=/usr/local/mysql/data/relay-log.info --relay_dir=/usr/local/mysql/data/ --slave_pass=xxx
Thu Jul 2 19:21:01 2020 - [info] Connecting to root@192.168.171.153(192.168.171.153:22)..
Checking slave recovery environment settings..
Opening /usr/local/mysql/data/relay-log.info ... ok.
Relay log found at /usr/local/mysql/data, up to relay-bin.000002
Temporary relay log file is /usr/local/mysql/data/relay-bin.000002
Checking if super_read_only is defined and turned on.. not present or turned off, ignoring.
Testing mysql connection and privileges..
mysql: [Warning] Using a password on the command line interface can be insecure.
done.
Testing mysqlbinlog output.. done.
Cleaning up test file(s).. done.
Thu Jul 2 19:21:02 2020 - [info] Slaves settings check done.
Thu Jul 2 19:21:02 2020 - [info]
192.168.171.151(192.168.171.151:3306) (current master)
+--192.168.171.152(192.168.171.152:3306)
+--192.168.171.153(192.168.171.153:3306)
Thu Jul 2 19:21:02 2020 - [info] Checking replication health on 192.168.171.152..
Thu Jul 2 19:21:02 2020 - [info] ok.
Thu Jul 2 19:21:02 2020 - [info] Checking replication health on 192.168.171.153..
Thu Jul 2 19:21:02 2020 - [info] ok.
Thu Jul 2 19:21:02 2020 - [warning] master_ip_failover_script is not defined.
Thu Jul 2 19:21:02 2020 - [warning] shutdown_script is not defined.
Thu Jul 2 19:21:02 2020 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.**验证成功的话会自动识别出所有服务器和主从状况
注：验证成功的话会自动识别出所有服务器和主从状况 在验 证时，若遇到这个错误：Can‘t exec "mysqlbinlog" ...... 解决方法是在所有服务器上执行：**
ln -s /usr/local/mysql/bin/* /usr/local/bin/
#启动 manager
[root@manager ~]# nohup masterha_manager --conf=/etc/masterha/app1.cnf &>/tmp/mha_manager.log &
[1] 49094注：在应用Unix/Linux时，我们一般想让某个程序在后台运行，于是我们将常会用 & 在程序结尾来让程 序自动运行。比如我们要运行mysql在后台： /usr/local/mysql/bin/mysqld_safe –user=mysql &。可是 有很多程序并不想mysqld一样，这样我们就需要nohup命令
#状态检查
[root@manager ~]# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:49094) is running(0:PING_OK), master:192.168.171.151故障转移验证
#模拟master宕机，查看备用master是否会接手
[root@master ~]# systemctl stop mysqld
mysql> show slave status\G # 在slave从上查看到已经更改IP
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.171.152 # 为备用master的IP
Master_User: mharep
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql-bin.000002
Read_Master_Log_Pos: 746
Relay_Log_File: relay-bin.000002
Relay_Log_Pos: 320
Relay_Master_Log_File: mysql-bin.000002
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
#查看MHA日志
[root@manager ~]# cat /masterha/app1/manager.log
Master 192.168.171.151(192.168.171.151:3306) is down! # down机
Check MHA Manager logs at manager:/masterha/app1/manager.log for details.
Started automated(non-interactive) failover.
The latest slave 192.168.171.152(192.168.171.152:3306) has all relay logs for recovery.
Selected 192.168.171.152(192.168.171.152:3306) as a new master.
192.168.171.152(192.168.171.152:3306): OK: Applying all logs succeeded.
192.168.171.153(192.168.171.153:3306): This host has the latest relay log events.
Generating relay diff files from the latest slave succeeded.
192.168.171.153(192.168.171.153:3306): OK: Applying all logs succeeded. Slave started, replicating from 192.168.171.152(192.168.171.152:3306)
192.168.171.152(192.168.171.152:3306): Resetting slave info succeeded.
Master failover to 192.168.171.152(192.168.171.152:3306) completed successfully. # 更改成功至此，MHA成功搭建
MHA Manager 端日常主要操作步骤
1）检查是否有下列文件，有则删除
发生主从切换后，MHAmanager服务会自动停掉，且在 manager_workdir（/masterha/app1）目录下面生成文件app1.failover.complete，若要启动MHA，必须先确保 无此文件) 如果有这个提示，那么删除此文件/ masterha/app1/app1.failover.complete [error] [/usr/share/perl5/vendor_perl/MHA/MasterFailover.pm, ln298] Last failover was done at 2015/01/09 10:00:47. Current time is too early to do failover again. If you want to do failover, manually remove / masterha/app1/app1.failover.complete and run this script again
# ll /masterha/app1/app1.failover.complete
# ll /masterha/app1/app1.failover.error2）检查MHA复制检查：（需要把master设置成candicatade的从服务器）
mysql> CHANGE MASTER TO MASTER_HOST=‘192.168.18.6‘, MASTER_PORT=3306, MASTER_LOG_FILE=‘mysql-bin.000002‘, MASTER_LOG_POS=154, MASTER_USER=‘mharep‘, MASTER_PASSWORD=‘123‘; Query OK, 0 rows affected, 2 warnings (0.01 sec)
# masterha_check_repl --conf=/etc/masterha/app1.cnf 3）停止MHA
masterha_stop --conf=/etc/masterha/app1.cnf 4）启动MHA
#nohup masterha_manager --conf=/etc/masterha/app1.cnf &>/tmp/mha_manager.log &当有slave 节点宕掉时，默认是启动不了的，加上 --ignore_fail_on_start 即使有节点宕掉也能启动MHA，如下：
#nohup masterha_manager --conf=/etc/masterha/app1.cnf --ignore_fail_on_start &>/tmp/mha_manager.log & 5） 检查状态
# masterha_check_status --conf=/etc/masterha /app1.cnf 6） 检查日志
#tail -f /masterha/app1/manager.log 7）主从切换后续工作重构
重构就是你的主挂了，切换到Candicate master上，Candicate master变成了主， 因此重构的一种方案原主库修复成一个新的slave 主库切换后，把原主库修复成新从库，然后重新执行以上5 步。原主库数据文件完整的情况下，可通过以下方式找出最后执行的CHANGE MASTER命令：
[root@centos1 ~]# grep "CHANGE MASTER TO Tue Feb 18 13:14:02 2020 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST=‘192.168.18.6‘, MASTER_PORT=3306, MASTER_LOG_FILE=‘mysqlbin.000002‘, MASTER_LOG_POS=154, MASTER_USER=‘mharep‘, MASTER_PASSWORD=‘xxx‘; Tue Feb 18 13:14:03 2020 - [info] Executed CHANGE MASTER.
mysql> CHANGE MASTER TO MASTER_HOST=‘192.168.18.6‘, MASTER_PORT=3306, MASTER_LOG_FILE=‘mysql-bin.000002‘, MASTER_LOG_POS=154, MASTER_USER=‘mharep‘, MASTER_PASSWORD=‘123‘;
mysql> start slave;
mysql> show slave status\G
#启动manager
# nohup masterha_manager --conf=/etc/masterha/app1.cnf &>/tmp/mha_manager.log &
# masterha_check_status --conf=/etc/masterha/app1.cnf
#注意：如果正常，会显示"PING_OK"，否则会显示"NOT_RUNNING"，这代表MHA监控没有开启。 定期删除中继日志 在配置主从复制中，slave上设置了参数relay_log_purge=0，所以slave节点需要定期删除中继日志，建议每个slave节点删除中继日志的时间错开。
corntab -e
0 5 * * * /usr/local/bin/purge_relay_logs - -user=root --password=pwd123 -port=3306 --disable_relay_log_purge >> /var/log/purge_relay.log 2>&1 MHA后传主要写的是添加了Keepalived和脚本切换VIP