// PCANBasic.cs
//
// ~~~~~~~~~~~~
//
// PCAN-Basic API
//
// ~~~~~~~~~~~~
//
// ------------------------------------------------------------------
// ------------------------------------------------------------------
//
// Copyright (C) 1999-2011 PEAK-System Technik GmbH, Darmstadt
// more Info at http://www.peak-system.com
//
using System;
using System.Text;
using System.Runtime.InteropServices;
namespace Peak.Can.Basic
{
using TPCANHandle = System.Byte;
#region Enumerations
/// <summary>
/// Represents a PCAN status/error code
/// </summary>
[Flags]
public enum TPCANStatus : uint
{
/// <summary>
/// No error
/// </summary>
PCAN_ERROR_OK = 0x00000,
/// <summary>
/// Transmit buffer in CAN controller is full
/// </summary>
PCAN_ERROR_XMTFULL = 0x00001,
/// <summary>
/// CAN controller was read too late
/// </summary>
PCAN_ERROR_OVERRUN = 0x00002,
/// <summary>
/// Bus error: an error counter reached the ‘light‘ limit
/// </summary>
PCAN_ERROR_BUSLIGHT = 0x00004,
/// <summary>
/// Bus error: an error counter reached the ‘heavy‘ limit
/// </summary>
PCAN_ERROR_BUSHEAVY = 0x00008,
/// <summary>
/// Bus error: the CAN controller is in bus-off state
/// </summary>
PCAN_ERROR_BUSOFF = 0x00010,
/// <summary>
/// Mask for all bus errors
/// </summary>
PCAN_ERROR_ANYBUSERR = (PCAN_ERROR_BUSLIGHT | PCAN_ERROR_BUSHEAVY | PCAN_ERROR_BUSOFF),
/// <summary>
/// Receive queue is empty
/// </summary>
PCAN_ERROR_QRCVEMPTY = 0x00020,
/// <summary>
/// Receive queue was read too late
/// </summary>
PCAN_ERROR_QOVERRUN = 0x00040,
/// <summary>
/// Transmit queue is full
/// </summary>
PCAN_ERROR_QXMTFULL = 0x00080,
/// <summary>
/// Test of the CAN controller hardware registers failed (no hardware found)
/// </summary>
PCAN_ERROR_REGTEST = 0x00100,
/// <summary>
/// Driver not loaded
/// </summary>
PCAN_ERROR_NODRIVER = 0x00200,
/// <summary>
/// Hardware already in use by a Net
/// </summary>
PCAN_ERROR_HWINUSE = 0x00400,
/// <summary>
/// A Client is already connected to the Net
/// </summary>
PCAN_ERROR_NETINUSE = 0x00800,
/// <summary>
/// Hardware handle is invalid
/// </summary>
PCAN_ERROR_ILLHW = 0x01400,
/// <summary>
/// Net handle is invalid
/// </summary>
PCAN_ERROR_ILLNET = 0x01800,
/// <summary>
/// Client handle is invalid
/// </summary>
PCAN_ERROR_ILLCLIENT = 0x01C00,
/// <summary>
/// Mask for all handle errors
/// </summary>
PCAN_ERROR_ILLHANDLE = (PCAN_ERROR_ILLHW | PCAN_ERROR_ILLNET | PCAN_ERROR_ILLCLIENT),
/// <summary>
/// Resource (FIFO, Client, timeout) cannot be created
/// </summary>
PCAN_ERROR_RESOURCE = 0x02000,
/// <summary>
/// Invalid parameter
/// </summary>
PCAN_ERROR_ILLPARAMTYPE = 0x04000,
/// <summary>
/// Invalid parameter value
/// </summary>
PCAN_ERROR_ILLPARAMVAL = 0x08000,
/// <summary>
/// Unknow error
/// </summary>
PCAN_ERROR_UNKNOWN = 0x10000,
/// <summary>
/// Channel is not initialized
/// </summary>
PCAN_ERROR_INITIALIZE = 0x40000,
}
/// <summary>
/// Represents a PCAN device
/// </summary>
public enum TPCANDevice : byte
{
/// <summary>
/// Undefined, unknown or not selected PCAN device value
/// </summary>
PCAN_NONE = 0,
/// <summary>
/// PCAN Non-Plug&Play devices. NOT USED WITHIN PCAN-Basic API
/// </summary>
PCAN_PEAKCAN = 1,
/// <summary>
/// PCAN-ISA, PCAN-PC/104, and PCAN-PC/104-Plus
/// </summary>
PCAN_ISA = 2,
/// <summary>
/// PCAN-Dongle
/// </summary>
PCAN_DNG = 3,
/// <summary>
/// PCAN-PCI, PCAN-cPCI, PCAN-miniPCI, and PCAN-PCI Express
/// </summary>
PCAN_PCI = 4,
/// <summary>
/// PCAN-USB and PCAN-USB Pro
/// </summary>
PCAN_USB = 5,
/// <summary>
/// PCAN-PC Card
/// </summary>
PCAN_PCC = 6
}
/// <summary>
/// Represents a PCAN parameter to be read or set
/// </summary>
public enum TPCANParameter : byte
{
/// <summary>
/// PCAN-USB device number parameter
/// </summary>
PCAN_DEVICE_NUMBER = 1,
/// <summary>
/// PCAN-PC Card 5-Volt power parameter
/// </summary>
PCAN_5VOLTS_POWER = 2,
/// <summary>
/// PCAN receive event handler parameter
/// </summary>
PCAN_RECEIVE_EVENT = 3,
/// <summary>
/// PCAN message filter parameter
/// </summary>
PCAN_MESSAGE_FILTER = 4,
/// <summary>
/// PCAN-Basic API version parameter
/// </summary>
PCAN_API_VERSION = 5,
/// <summary>
/// PCAN device channel version parameter
/// </summary>
PCAN_CHANNEL_VERSION = 6,
/// <summary>
/// PCAN Reset-On-Busoff parameter
/// </summary>
PCAN_BUSOFF_AUTORESET = 7,
/// <summary>
/// PCAN Listen-Only parameter
/// </summary>
PCAN_LISTEN_ONLY = 8,
/// <summary>
/// Directory path for trace files
/// </summary>
PCAN_LOG_LOCATION = 9,
/// <summary>
/// Debug-Trace activation status
/// </summary>
PCAN_LOG_STATUS = 10,
/// <summary>
/// Configuration of the debugged information (LOG_FUNCTION_***)
/// </summary>
PCAN_LOG_CONFIGURE = 11,
/// <summary>
/// Custom insertion of text into the log file
/// </summary>
PCAN_LOG_TEXT = 12,
/// <summary>
/// Availability status of a PCAN-Channel
/// </summary>
PCAN_CHANNEL_CONDITION = 13,
/// <summary>
/// PCAN hardware name parameter
/// </summary>
PCAN_HARDWARE_NAME = 14,
}
/// <summary>
/// Represents the type of a PCAN message
/// </summary>
[Flags]
public enum TPCANMessageType : byte
{
/// <summary>
/// The PCAN message is a CAN Standard Frame (11-bit identifier)
/// </summary>
PCAN_MESSAGE_STANDARD = 0x00,
/// <summary>
/// The PCAN message is a CAN Remote-Transfer-Request Frame
/// </summary>
PCAN_MESSAGE_RTR = 0x01,
/// <summary>
/// The PCAN message is a CAN Extended Frame (29-bit identifier)
/// </summary>
PCAN_MESSAGE_EXTENDED = 0x02,
/// <summary>
/// The PCAN message represents a PCAN status message
/// </summary>
PCAN_MESSAGE_STATUS = 0x80,
}
/// <summary>
/// Represents a PCAN filter mode
/// </summary>
public enum TPCANMode : byte
{
/// <summary>
/// Mode is Standard (11-bit identifier)
/// </summary>
PCAN_MODE_STANDARD = TPCANMessageType.PCAN_MESSAGE_STANDARD,
/// <summary>
/// Mode is Extended (29-bit identifier)
/// </summary>
PCAN_MODE_EXTENDED = TPCANMessageType.PCAN_MESSAGE_EXTENDED,
}
/// <summary>
/// Represents a PCAN Baud rate register value
/// </summary>
public enum TPCANBaudrate : ushort
{
/// <summary>
/// 1 MBit/s
/// </summary>
PCAN_BAUD_1M = 0x0014,
/// <summary>
/// 800 KBit/s
/// </summary>
PCAN_BAUD_800K = 0x0016,
/// <summary>
/// 500 kBit/s
/// </summary>
PCAN_BAUD_500K = 0x001C,
/// <summary>
/// 250 kBit/s
/// </summary>
PCAN_BAUD_250K = 0x011C,
/// <summary>
/// 125 kBit/s
/// </summary>
PCAN_BAUD_125K = 0x031C,
/// <summary>
/// 100 kBit/s
/// </summary>
PCAN_BAUD_100K = 0x432F,
/// <summary>
/// 95,238 KBit/s
/// </summary>
PCAN_BAUD_95K = 0xC34E,
/// <summary>
/// 83,333 KBit/s
/// </summary>
PCAN_BAUD_83K = 0x4B14,
/// <summary>
/// 50 kBit/s
/// </summary>
PCAN_BAUD_50K = 0x472F,
/// <summary>
/// 47,619 KBit/s
/// </summary>
PCAN_BAUD_47K = 0x1414,
/// <summary>
/// 33,333 KBit/s
/// </summary>
PCAN_BAUD_33K = 0x1D14,
/// <summary>
/// 20 kBit/s
/// </summary>
PCAN_BAUD_20K = 0x532F,
/// <summary>
/// 10 kBit/s
/// </summary>
PCAN_BAUD_10K = 0x672F,
/// <summary>
/// 5 kBit/s
/// </summary>
PCAN_BAUD_5K = 0x7F7F,
}
/// <summary>
/// Represents the type of PCAN (non plug&play) hardware to be initialized
/// </summary>
public enum TPCANType : byte
{
/// <summary>
/// PCAN-ISA 82C200
/// </summary>
PCAN_TYPE_ISA = 0x01,
/// <summary>
/// PCAN-ISA SJA1000
/// </summary>
PCAN_TYPE_ISA_SJA = 0x09,
/// <summary>
/// PHYTEC ISA
/// </summary>
PCAN_TYPE_ISA_PHYTEC = 0x04,
/// <summary>
/// PCAN-Dongle 82C200
/// </summary>
PCAN_TYPE_DNG = 0x02,
/// <summary>
/// PCAN-Dongle EPP 82C200
/// </summary>
PCAN_TYPE_DNG_EPP = 0x03,
/// <summary>
/// PCAN-Dongle SJA1000
/// </summary>
PCAN_TYPE_DNG_SJA = 0x05,
/// <summary>
/// PCAN-Dongle EPP SJA1000
/// </summary>
PCAN_TYPE_DNG_SJA_EPP = 0x06,
}
#endregion
#region Structures
/// <summary>
/// Represents a PCAN message
/// </summary>
public struct TPCANMsg
{
/// <summary>
/// 11/29-bit message identifier
/// </summary>
public uint ID;
/// <summary>
/// Type of the message
/// </summary>
[MarshalAs(UnmanagedType.U1)]
public TPCANMessageType MSGTYPE;
/// <summary>
/// Data Length Code of the message (0..8)
/// </summary>
public byte LEN;
/// <summary>
/// Data of the message (DATA[0]..DATA[7])
/// </summary>
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public byte[] DATA;
}
/// <summary>
/// Represents a timestamp of a received PCAN message.
/// Total Microseconds = micros + 1000 * millis + 0xFFFFFFFF * 1000 * millis_overflow
/// </summary>
public struct TPCANTimestamp
{
/// <summary>
/// Base-value: milliseconds: 0.. 2^32-1
/// </summary>
public uint millis;
/// <summary>
/// Roll-arounds of millis
/// </summary>
public ushort millis_overflow;
/// <summary>
/// Microseconds: 0..999
/// </summary>
public ushort micros;
}
#endregion
#region PCANBasic class
/// <summary>
/// PCAN-Basic API class implementation
/// </summary>
public static class PCANBasic
{
#region PCAN-BUS Handles Definition
/// <summary>
/// Undefined/default value for a PCAN bus
/// </summary>
public const TPCANHandle PCAN_NONEBUS = 0x00;
/// <summary>
/// PCAN-ISA interface, channel 1
/// </summary>
public const TPCANHandle PCAN_ISABUS1 = 0x21;
/// <summary>
/// PCAN-ISA interface, channel 2
/// </summary>
public const TPCANHandle PCAN_ISABUS2 = 0x22;
/// <summary>
/// PCAN-ISA interface, channel 3
/// </summary>
public const TPCANHandle PCAN_ISABUS3 = 0x23;
/// <summary>
/// PCAN-ISA interface, channel 4
/// </summary>
public const TPCANHandle PCAN_ISABUS4 = 0x24;
/// <summary>
/// PCAN-ISA interface, channel 5
/// </summary>
public const TPCANHandle PCAN_ISABUS5 = 0x25;
/// <summary>
/// PCAN-ISA interface, channel 6
/// </summary>
public const TPCANHandle PCAN_ISABUS6 = 0x26;
/// <summary>
/// PCAN-ISA interface, channel 7
/// </summary>
public const TPCANHandle PCAN_ISABUS7 = 0x27;
/// <summary>
/// PCAN-ISA interface, channel 8
/// </summary>
public const TPCANHandle PCAN_ISABUS8 = 0x28;
/// <summary>
/// PPCAN-Dongle/LPT interface, channel 1
/// </summary>
public const TPCANHandle PCAN_DNGBUS1 = 0x31;
/// <summary>
/// PCAN-PCI interface, channel 1
/// </summary>
public const TPCANHandle PCAN_PCIBUS1 = 0x41;
/// <summary>
/// PCAN-PCI interface, channel 2
/// </summary>
public const TPCANHandle PCAN_PCIBUS2 = 0x42;
/// <summary>
/// PCAN-PCI interface, channel 3
/// </summary>
public const TPCANHandle PCAN_PCIBUS3 = 0x43;
/// <summary>
/// PCAN-PCI interface, channel 4
/// </summary>
public const TPCANHandle PCAN_PCIBUS4 = 0x44;
/// <summary>
/// PCAN-PCI interface, channel 5
/// </summary>
public const TPCANHandle PCAN_PCIBUS5 = 0x45;
/// <summary>
/// PCAN-PCI interface, channel 6
/// </summary>
public const TPCANHandle PCAN_PCIBUS6 = 0x46;
/// <summary>
/// PCAN-PCI interface, channel 7
/// </summary>
public const TPCANHandle PCAN_PCIBUS7 = 0x47;
/// <summary>
/// PCAN-PCI interface, channel 8
/// </summary>
public const TPCANHandle PCAN_PCIBUS8 = 0x48;
/// <summary>
/// PCAN-USB interface, channel 1
/// </summary>
public const TPCANHandle PCAN_USBBUS1 = 0x51;
/// <summary>
/// PCAN-USB interface, channel 2
/// </summary>
public const TPCANHandle PCAN_USBBUS2 = 0x52;
/// <summary>
/// PCAN-USB interface, channel 3
/// </summary>
public const TPCANHandle PCAN_USBBUS3 = 0x53;
/// <summary>
/// PCAN-USB interface, channel 4
/// </summary>
public const TPCANHandle PCAN_USBBUS4 = 0x54;
/// <summary>
/// PCAN-USB interface, channel 5
/// </summary>
public const TPCANHandle PCAN_USBBUS5 = 0x55;
/// <summary>
/// PCAN-USB interface, channel 6
/// </summary>
public const TPCANHandle PCAN_USBBUS6 = 0x56;
/// <summary>
/// PCAN-USB interface, channel 7
/// </summary>
public const TPCANHandle PCAN_USBBUS7 = 0x57;
/// <summary>
/// PCAN-USB interface, channel 8
/// </summary>
public const TPCANHandle PCAN_USBBUS8 = 0x58;
/// <summary>
/// PCAN-PC Card interface, channel 1
/// </summary>
public const TPCANHandle PCAN_PCCBUS1 = 0x61;
/// <summary>
/// PCAN-PC Card interface, channel 2
/// </summary>
public const TPCANHandle PCAN_PCCBUS2 = 0x62;
#endregion
#region Parameter values definition
/// <summary>
/// The PCAN parameter is not set (inactive)
/// </summary>
public const int PCAN_PARAMETER_OFF = 0;
/// <summary>
/// The PCAN parameter is set (active)
/// </summary>
public const int PCAN_PARAMETER_ON = 1;
/// <summary>
/// The PCAN filter is closed. No messages will be received
/// </summary>
public const int PCAN_FILTER_CLOSE = 0;
/// <summary>
/// The PCAN filter is fully opened. All messages will be received
/// </summary>
public const int PCAN_FILTER_OPEN = 1;
/// <summary>
/// The PCAN filter is custom configured. Only registered
/// messages will be received
/// </summary>
public const int PCAN_FILTER_CUSTOM = 2;
/// <summary>
/// The PCAN-Channel handle is illegal, or its associated hadware is not available
/// </summary>
public const int PCAN_CHANNEL_UNAVAILABLE = 0;
/// <summary>
/// The PCAN-Channel handle is available to be connected (Plug&Play Hardware: it means futhermore that the hardware is plugged-in)
/// </summary>
public const int PCAN_CHANNEL_AVAILABLE = 1;
/// <summary>
/// The PCAN-Channel handle is valid, and is already being used
/// </summary>
public const int PCAN_CHANNEL_OCCUPIED = 2;
/// <summary>
/// Logs system exceptions / errors
/// </summary>
public const int LOG_FUNCTION_DEFAULT = 0x00;
/// <summary>
/// Logs the entries to the PCAN-Basic API functions
/// </summary>
public const int LOG_FUNCTION_ENTRY = 0x01;
/// <summary>
/// Logs the parameters passed to the PCAN-Basic API functions
/// </summary>
public const int LOG_FUNCTION_PARAMETERS = 0x02;
/// <summary>
/// Logs the exits from the PCAN-Basic API functions
/// </summary>
public const int LOG_FUNCTION_LEAVE = 0x04;
/// <summary>
/// Logs the CAN messages passed to the CAN_Write function
/// </summary>
public const int LOG_FUNCTION_WRITE = 0x08;
/// <summary>
/// Logs the CAN messages received within the CAN_Read function
/// </summary>
public const int LOG_FUNCTION_READ = 0x10;
#endregion
#region PCANBasic API Implementation
/// <summary>
/// Initializes a PCAN Channel
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Btr0Btr1">The speed for the communication (BTR0BTR1 code)</param>
/// <param name="HwType">NON PLUG&PLAY: The type of hardware and operation mode</param>
/// <param name="IOPort">NON PLUG&PLAY: The I/O address for the parallel port</param>
/// <param name="Interrupt">NON PLUG&PLAY: Interrupt number of the parallel por</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Initialize")]
public static extern TPCANStatus Initialize(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
[MarshalAs(UnmanagedType.U2)]
TPCANBaudrate Btr0Btr1,
[MarshalAs(UnmanagedType.U1)]
TPCANType HwType,
UInt32 IOPort,
UInt16 Interrupt);
/// <summary>
/// Initializes a PCAN Channel
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Btr0Btr1">The speed for the communication (BTR0BTR1 code)</param>
/// <returns>A TPCANStatus error code</returns>
public static TPCANStatus Initialize(
TPCANHandle Channel,
TPCANBaudrate Btr0Btr1)
{
return Initialize(Channel, Btr0Btr1, (TPCANType)0, 0, 0);
}
/// <summary>
/// Uninitializes one or all PCAN Channels initialized by CAN_Initialize
/// </summary>
/// <remarks>Giving the TPCANHandle value "PCAN_NONEBUS",
/// uninitialize all initialized channels</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Uninitialize")]
public static extern TPCANStatus Uninitialize(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel);
/// <summary>
/// Resets the receive and transmit queues of the PCAN Channel
/// </summary>
/// <remarks>A reset of the CAN controller is not performed</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Reset")]
public static extern TPCANStatus Reset(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel);
/// <summary>
/// Gets the current status of a PCAN Channel
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_GetStatus")]
public static extern TPCANStatus GetStatus(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel);
/// <summary>
/// Reads a CAN message from the receive queue of a PCAN Channel
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="MessageBuffer">A TPCANMsg structure buffer to store the CAN message</param>
/// <param name="TimestampBuffer">A TPCANTimestamp structure buffer to get
/// the reception time of the message</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Read")]
public static extern TPCANStatus Read(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
out TPCANMsg MessageBuffer,
out TPCANTimestamp TimestampBuffer);
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Read")]
private static extern TPCANStatus Read(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
out TPCANMsg MessageBuffer,
IntPtr bufferPointer);
/// <summary>
/// Reads a CAN message from the receive queue of a PCAN Channel
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="MessageBuffer">A TPCANMsg structure buffer to store the CAN message</param>
/// <returns>A TPCANStatus error code</returns>
public static TPCANStatus Read(
TPCANHandle Channel,
out TPCANMsg MessageBuffer)
{
return Read(Channel, out MessageBuffer, IntPtr.Zero);
}
/// <summary>
/// Transmits a CAN message
/// </summary>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="MessageBuffer">A TPCANMsg buffer with the message to be sent</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_Write")]
public static extern TPCANStatus Write(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
ref TPCANMsg MessageBuffer);
/// <summary>
/// Configures the reception filter
/// </summary>
/// <remarks>The message filter will be expanded with every call to
/// this function. If it is desired to reset the filter, please use
/// the ‘SetValue‘ function</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="FromID">The lowest CAN ID to be received</param>
/// <param name="ToID">The highest CAN ID to be received</param>
/// <param name="Mode">Message type, Standard (11-bit identifier) or
/// Extended (29-bit identifier)</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_FilterMessages")]
public static extern TPCANStatus FilterMessages(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
UInt32 FromID,
UInt32 ToID,
[MarshalAs(UnmanagedType.U1)]
TPCANMode Mode);
/// <summary>
/// Retrieves a PCAN Channel value
/// </summary>
/// <remarks>Parameters can be present or not according with the kind
/// of Hardware (PCAN Channel) being used. If a parameter is not available,
/// a PCAN_ERROR_ILLPARAMTYPE error will be returned</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Parameter">The TPCANParameter parameter to get</param>
/// <param name="StringBuffer">Buffer for the parameter value</param>
/// <param name="BufferLength">Size in bytes of the buffer</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_GetValue")]
public static extern TPCANStatus GetValue(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
[MarshalAs(UnmanagedType.U1)]
TPCANParameter Parameter,
StringBuilder StringBuffer,
UInt32 BufferLength);
/// <summary>
/// Retrieves a PCAN Channel value
/// </summary>
/// <remarks>Parameters can be present or not according with the kind
/// of Hardware (PCAN Channel) being used. If a parameter is not available,
/// a PCAN_ERROR_ILLPARAMTYPE error will be returned</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Parameter">The TPCANParameter parameter to get</param>
/// <param name="NumericBuffer">Buffer for the parameter value</param>
/// <param name="BufferLength">Size in bytes of the buffer</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_GetValue")]
public static extern TPCANStatus GetValue(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
[MarshalAs(UnmanagedType.U1)]
TPCANParameter Parameter,
out UInt32 NumericBuffer,
UInt32 BufferLength);
/// <summary>
/// Configures or sets a PCAN Channel value
/// </summary>
/// <remarks>Parameters can be present or not according with the kind
/// of Hardware (PCAN Channel) being used. If a parameter is not available,
/// a PCAN_ERROR_ILLPARAMTYPE error will be returned</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Parameter">The TPCANParameter parameter to set</param>
/// <param name="NumericBuffer">Buffer with the value to be set</param>
/// <param name="BufferLength">Size in bytes of the buffer</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_SetValue")]
public static extern TPCANStatus SetValue(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
[MarshalAs(UnmanagedType.U1)]
TPCANParameter Parameter,
ref UInt32 NumericBuffer,
UInt32 BufferLength);
/// <summary>
/// Configures or sets a PCAN Channel value
/// </summary>
/// <remarks>Parameters can be present or not according with the kind
/// of Hardware (PCAN Channel) being used. If a parameter is not available,
/// a PCAN_ERROR_ILLPARAMTYPE error will be returned</remarks>
/// <param name="Channel">The handle of a PCAN Channel</param>
/// <param name="Parameter"></param>
/// <param name="StringBuffer">Buffer with the value to be set</param>
/// <param name="BufferLength">Size in bytes of the buffer</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_SetValue")]
public static extern TPCANStatus SetValue(
[MarshalAs(UnmanagedType.U1)]
TPCANHandle Channel,
[MarshalAs(UnmanagedType.U1)]
TPCANParameter Parameter,
[MarshalAs(UnmanagedType.LPStr,SizeParamIndex=3)]
string StringBuffer,
UInt32 BufferLength);
/// <summary>
/// Returns a descriptive text of a given TPCANStatus error
/// code, in any desired language
/// </summary>
/// <remarks>The current languages available for translation are:
/// Neutral (0x00), German (0x07), English (0x09), Spanish (0x0A),
/// Italian (0x10) and French (0x0C)</remarks>
/// <param name="Error">A TPCANStatus error code</param>
/// <param name="Language">Indicates a ‘Primary language ID‘</param>
/// <param name="StringBuffer">Buffer for the text (must be at least 256 in length)</param>
/// <returns>A TPCANStatus error code</returns>
[DllImport("PCANBasic.dll", EntryPoint = "CAN_GetErrorText")]
public static extern TPCANStatus GetErrorText(
[MarshalAs(UnmanagedType.U4)]
TPCANStatus Error,
UInt16 Language,
StringBuilder StringBuffer);
#endregion
}
#endregion
}
C# PCANBasic.cs