COMP20007 Design of Algorithms
School of Computing and Information Systems
The University of Melbourne
Assignment 2
Due: 11:59 PM Wednesday May 29th
Introduction
This assignment consists of 3 programming problems and 5 analysis problems. You will submit your
solutions to the programming tasks via dimefox submit and the analysis component via Turnitin.
This is not the same submission process as in Assignment 1.
This assignment has a total of 20 marks and will contribute 20% to your final grade for this subject.
The submission for this assignment will have two components. The analysis will again be submitted
via Turnitin, however the programming component will now be submitted using dimefox submit.
Please note that this is different from Assignment 1. We will not be lenient with submissions for
which the submission fails, so please ensure you receive confirmation that your assignment has
been submitted for both components.
Programming Problems
For the following programming problems you must write a C program which reads input from stdin
and outputs the required output to stdout.
Your program must solve each test case in 3 (three) seconds on dimefox to achieve full marks. Any
algorithm with an appropriate runtime complexity should easily meet these test time bounds.
Note that the comments starting with // are for illustrative purposes and are not included in the
actual input/output.
Problem 1.a. (Max-Heaps) Write a C program which takes as input a sequence of n (possibly
negative, not necessarily distinct) integers and constructs a max-heap containing these elements.
Your program will be provided with the value n (the total number of integers in the input) on the
first line. The next n lines will contain the integers, one integer per line. Your program must output
the level-order traversal of your heap (i.e., the array representation starting at index 1).
The input heap is a perfect binary tree, i.e., n = 2k 1.
1
For example if input.txt contains:
One example of a max-heap containing these elements is:
Note: the solution is not unique, any max-heap will do!
The input may contain duplicate integers, and you must insert all occurrences of each element into
the heap.
For full marks your algorithm for this problem must have a time-complexity of O(n).

COMP20007作业代写、代做Information Systems作业、代写C/C++，Python编程作业
Problem 1.b. (Right-Handed Max-Heaps) Create a modified version of your program in Problem
1.a. which constructs a right-handed max-heap out of the provided input.
A right-handed max-heap is a max-heap which satisfies the additional property that for each non-leaf
node the right child has a value greater than or equal to the value of the left child.
Your output must be in the same format as in Problem 1.a. and for full marks must have a time
complexity of O(n).
Hint: consider starting from a heap.
Problem 2.a. (Shortest DAG Paths) In this task you will write a dynamic programming solution
which computes the shortest path from node v0 (a source) to node vn?1 (a sink) in a weighted directed
acyclic graph (DAG).
The nodes in the input graph have labels {v0, . . . , vn?1}. This graph is already topologically ordered,
i.e., if the graph contains an edge (vi
, vj ) then j is strictly greater than i.
The first line will contain the number of nodes in the graph n. The n adjacency lists will follow, i.e.,
for each i ∈ {0, . . . , n 1} there will be a line giving out-degree(vi), and then out-degree(vi) many
2
lines containing pairs (vj , wij ) which indicate that the DAG contains an edge (vi, vj ) with weight wij .
Note that all edge weights wij are positive.
Consider the following graph:
The following input represents this graph:
4 // number of nodes
2 // out-degree of v_0
2 7 // indicates that the edge (v_0, v_2) is present with weight 7to n 1, and output what that path is.
For this example, the shortest path is v0, v1, v2, v3 with a cost of 6.
Your program must output the cost of the path, and the number of edges in the path, followed by
these vertices (starting with 0 and ending with n ? 1). The output is then:
$ p2 a < input.txt
6 // path cost
3 // number of edges in the path
If there is no path from v0 to vn?1 in the DAG then the only output your program must produce is
"No Path".
It is possible to solve this problem in O(n+m) time (for a DAG with n vertices and m edges), although
any implementation which solves the test cases within the time limit will be accepted.
3
Problem 2.b. (Shortest DAG k-Paths) Write a program which finds the shortest path which
uses no more than k edges from v0 to vn?1 in an input DAG given in topological order.
The input will be in the same format as for Problem 2.a., except that k is provided on the first line
as well. So for the example DAG from the previous part, with k = 2 the input will be:
4 2 // n and k respectively
Your program must output the solution in the same format as before. For this example the shortest
path using no more than k = 2 edges is v0, v1, v3 which uses 2 edges for a cost of 9. The output is:
$ p2 b < input.txt
9 // path cost
2 // number of edges in the path
If there does not exist a path from v0 to vn?1 in the DAG using k or fewer edges then the only output
your program must produce is "No Path".
It is possible to solve this problem in O(k(n + m)) time, although any implementation which solves
the test cases within the time limit will be accepted.
Problem 3. (Binary Search Trees) First, some definitions:
Definition 3.1. (Height) The height of a node is the number of levels below it (including the level it
is on). More precisely, the height of a node x in a tree is one more than the number of edges between
it and the deepest leaf in the subtree rooted at x. The height of a tree is the height of its root.
Definition 3.2. (Balanced Binary Tree) A binary tree is balanced if every node x, with (possibly
null) children ` and r, satisfies:
1 ≤ height(`) height(r) ≤ 1
Note that we consider height(null) to be 0.
Write a C program which does the following:
Reads in an array of n positive integers.
Inserts these n integers into a binary search tree, in the order in which they are provided.
Output the number of nodes in the binary search tree.
Output the height of the binary search tree (see Definition 3.1.).
Balance the binary search tree (see Definition 3.2.). Output the elements of this balanced binary
search tree.
4
Note that elements in the binary search tree must be distinct, however the input array may contain
duplicates. For this reason the number of nodes in the tree and the size of the input may not be the
same.
Your program will be provided with n on the first line. The next n lines contain the n integers which
make up the input array.
For example, given the following input:
10 // this is the size of the input array, n
The resulting binary search tree is:
The number of nodes in the binary search tree is 6, and the height is 4.
The following is a balanced binary search tree containing these elements:
The first line of your output must be the number of nodes in the tree. The second line must be the
height of the binary search tree (before re-balancing).
You must output the balanced binary search tree in a format similar to how we store a heap, i.e., the
first line contains the root (index 1) and the node on line i has children at lines 2i and 2i + 1. Note
that your tree might have nodes which do not have a left and/or right child, for these lines in the
output (where the child is null) output -1.
Before printing your balanced binary search tree you must print the number of lines used to represent
the balanced binary search tree. There must not include any trailing -1s.
5
The output for the example given is:
$ p3 < input.txt
6 // the number of nodes
4 // the height of the original binary search tree
7 // the number of lines required to represent the balanced binary search tree
Note: implementing a self-balancing tree such as an AVL tree is not required to solve this problem.
Analysis Problems
Problem 4. (Average-case complexity of Quicksort) In the lectures, we have seen proof for
the average-case complexity of Quicksort (see the lecture capture video for Lecture 14, time stamp
7:35). Your task is to provide proof using a different argument, following the logic below.
There are two components in the partition algorithm of Quicksort: 1) select the pivot and 2) partition
the array based on the pivot. Consider an oracle algorithm1
that can, in constant time, choose a pivot
that is guaranteed to lie in between the top 25% and top 75% of the elements in the array.
(a) Prove that using the oracle as a pivot selection strategy would ensure that Quicksort does not
perform worse than O(n · log(n)).
(b) What is the probability that a randomly selected element of the array falls in between the top
25% and top 75%?
(c) Prove that the average case complexity of Quicksort is O(n · log(n)) by combining the reasoning
from the previous two points.
You may find the following statement helpful in your proof: if a trial’s probability of success is
p, then on average it requires n/p trials to achieve n successes.
Problem 5. (Lexicographical Optimisation with Paths) Provide pseudocode and an explanation
for an algorithm that computes a path between two nodes in an undirected graph such that:
The maximum weight in the path is minimised, i.e., there does not exist another path with a
smaller maximum weight.
Amongst all such paths, it finds the path with minimum cost.
The time complexity is no worse than O((|E|
2 + |E| · |V |)· log(|V |)), where E is the set of edges
and V is the set of nodes.
1
In mathematical arguments an oracle refers to some black box mechanism which provides some value. In this case
the value is the pivot. It usually corresponds to a convenient assumption for the sake of the proof, in this case the
assumption is that we can always select a pivot in the middle half of values in the array.
6
For example, consider computing the optimum path between nodes v0 and v5 for the following graph:
The optimum solution according to the above criteria is the path p? = (v0, v2, v3, v5). The path p is
considered more favourable than the path p
0 = (v0, v1, v4, v5) as the minimum maximum weight of p?
is 2 compared to 3 for p0, even though cost(p?) = 6 > 5 = cost(p0).
Your algorithm should take the following input/produce the following output:
MinMaxWeightPath Input: An weighted undirected graph G, a start node vs, an end node ve
Output: The path between vs and ve which satisfies the above conditions,
and the total cost.
Problem 6. (Weighted Graph Reduction) Your friend has written an algorithm which solves
the all pairs shortest path problem for unweighted undirected graphs. The cost of a path in this setting
is the number of edges in the path. The algorithm UnweightedAPSP takes the following input and
output:
UnweightedAPSP Input: An unweighted undirected graph G
Output: The costs of the shortest paths between each pair of vertices {u, v}
For example, consider the following graph G.
The output of UnweightedAPSP would be:
{A, B} : 1, {A, C} : 1, {A, D} : 1, {B, C} : 2, {B, D} : 2, {C, D} : 2
Your task is two use your friend’s algorithm UnweightedAPSP to solve the all pairs shortest paths
problem for weighted undirected graphs.
Write an algorithm WeightedAPSP in pseudocode which makes use of the algorithm UnweightedAPSP
to solve the problem. Your algorithm must transform its input into an unweighted graph, call UnweightedAPSP,
and then interpret the output to correctly compute the costs of the shortest paths
for the original weighted graph. The input and output specification of your algorithm must be:
WeightedAPSP Input: A weighted undirected graph G
Output: The costs of the shortest paths between each pair of vertices {u, v}
7
For example, consider the following graph G.
The output of your algorithm UnweightedAPSP must be:
{A, B} : 2, {A, C} : 4, {A, D} : 3, {B, C} : 6, {B, D} : 5, {C, D} : 7
This type of problem is called a reduction: we have reduced the problem WeightedAPSP to the
problem UnweightedAPSP. Reductions show up frequently in computer science, and is of particular
importance to complexity theory which is concerned with the “hardness” of different problems. Usually
we are concerned with what we refer to as a “polynomial-time reduction”, which this problem is not,
more on this in Week 12!
Problem 7.a. (Heap Algorithm Analysis) In Problem 1.a. you are asked to construct a maxheap
from an input array of n integers in O(n) time.
Write pseudocode for the algorithm you implemented to construct the max-heap. The input/output
specification is:
ConstructHeap Input: An array A of n integers
Output: An array H representing a max-heap
Prove that your algorithm runs in O(n) time.
The algorithm you discuss must be the same as the algorithm you used in Problem 1.a.
Problem 7.b. (Right-Handed Heap Algorithm Analysis) In Problem 1.b. you are asked to
construct a right-handed max-heap from an input array of n integers in O(n) time.
Write pseudocode for the algorithm you implemented to construct the right-handed max heap. The
input/output specification is:
ConstructRightHandedHeap Input: An array A of n integers
Output: An array H representing a right-handed max-heap
Prove that your algorithm runs in O(n) time.
The algorithm you discuss must be the same as the algorithm you used in Problem 1.b.
Problem 8. (Heap Top-k) Prof Dubious has made the following claim, and has provided a proof:
Claim. Let n and k be positive integers such that 2k 1 ≤ n. In a max-heap H of n elements, the
top 2k 1 elements are in the first k layers of the heap.
Proof. Since H is a max-heap, each node in H must satisfy the heap property, i.e., if Hi
is an
element of H with at least one child then Hi ≥ max{children(Hi)}.
We know that every subtree of the heap H is a heap, as subtrees of complete binary trees are
complete binary trees, and the heap property holds.
8
Therefore since each subtree is a heap, the maximum element in each subtree must be at the root
of that subtree.
Clearly, the largest element in H is at the root. Since the left and right subtrees are also heaps the
next two largest elements must be at the root of each of these subtrees, i.e., the left and right child
of the root.
Hence, the largest 22 ? 1 = 3 elements of the heap lie in the first 2 layers. We repeatedly apply
this argument to each subtree until we have considered the first k layers. Thus the largest 2k ? 1
elements in the heap must be in the first k layers.
Briefly describe what is wrong with Professor Dubious’s argument and provide a counter-example to
their claim.
Completing The Programming Problems
Your program for each problem will receive input via stdin (i.e., command line input) which can be
read using scanf(...) and must produce output to stdout, using printf(...) for instance.
You must create three separate executable files for this project, p1, p2 and p3. The programs p1 and
p2 must take in the “part” as a command line option, for example:
$ ./p1 a < input.txt
$ ./p1 b < input.txt
$ ./p2 a < input.txt
$ ./p3 < input.txt
The files provided have the following directory structure:
provided_files/
You must complete Makefile, p1.c, p2.c and p3.c, and you are encouraged to use multi-file C
modules to better structure your programs.
The Makefile contains targets p1, p2 and p3 which will be compiled with make <target>, e.g., make
p1. You must keep the Makefile updated if you use different compilation flags or include additional
.c and .h files.
Testing Your Programs
Each problem has 10 test cases which we will test your submission against (i.e., 50 test cases in total).
All of these test cases (and examples of expected outputs for each) are provided to you for you to do
your own local testing. There will be no hidden test cases. Note that these problems do not have
9
unique solutions so your output doesn’t need to be exactly the same as the expected output files we
have provided.
Your program will be given a time limit of 3 seconds to solve each test case.
We have provided the verifier we will use to verify your submissions on dimefox. The python program,
verifier.py, expects the following input:
usage: python3 test.py <problem> <input> <expected_output> <actual_output>
This program takes as input the path to the test case input file, the expected
output for that test case and the actual output (i.e., your program’s output).
You must specify the problem which is being tested as well.
The possible problems are: p1a, p1b, p2a, p2b, p3
For example, to run our program against the p1a-0 test case, we might perform the following sequence
of commands:
$ make p1
$ ./p1 < tests/p1a-in-0.txt > tests/p1a-my-out-0.txt
# Note: the following line is only wrapped so that it fits here
$ python verifier.py p1a tests/p1a-in-0.txt tests/p1a-out-0.txt \
tests/p1a-my-out.txt
p1a-0: succeeded
The expected output here is in a file called tests/p1a-out-0.txt, be careful not to override these
files when you create your own output.
We have also provided a bash script which will run and verify all of the tests for you, for example:
$ make p1
$ make p2
$ make p3
$ sh test_all.sh
p1a-0: succeeded
p1a-1: failed (...)
...
This script expects your Makefile and all required files to be in the same directory as the test all.sh
script, the verifier.py script and the tests/ directory.
Programming Problem Submission
You will submit your programs via dimefox submit. Instructions for how to connect to dimefox can
be found under the Workshops section of the LMS.
You should copy all files required to run and compile your code to dimefox, this includes the Makefile
and all .c and .h files.
From the directory containing these files you should run submit and list all files required to
compile and run your program. For example, if we have a heap module as well as p1.c, p2.c,
p3.c and the Makefile we would run:
submit comp20007 a2 Makefile p1.c p2.c p3.c heap.c heap.h
You should then verify your submission like so:
10
verify comp20007 a2 > a2-receipt.txt
This will create a submission receipt called a2-receipt.txt which will tell you whether or not
your code compiled, which test cases your code passed and failed and importantly, the
mark your submission has received.
To view the contents of this submission, you can use the command:
less a2-receipt.txt
You may submit multiple times.
Note: any attempt to manipulate the submission system and/or hard-code solutions to pass the specific
test cases we have provided will result in a mark of 0 for the whole assignment.
Completing The Analysis Problems
You will submit your solutions to the analysis problems via Turnitin, as you did in Assignment 1.
For problems which ask for pseudocode we expect you to provide the same level of detail as the lectures
and workshops do. Pseudocode which lacks sufficient detail or is too detailed (e.g., looks like C code)
will be subject to a mark deduction.
Your submission should be a .pdf file which contains your solutions to Problems 4–8.
The page limit for this assignment is 8 pages, however you should be able to answer these questions
in much fewer than 8 pages. Any submission containing more than 8 pages will be subject to a mark
deduction.
Make sure you receive a submission receipt from Turnitin. If you are having trouble submitting your
analysis try using a different web browser such as Google Chrome.
Mark Allocation
The total number of marks in this assignment is 20. The maximum number of marks per problem are:
Problem 1.a. 2 marks.
Problem 1.b. 1 mark.
Problem 2.a. 3 marks.
Problem 2.b. 2 marks.
Problem 3. 3 marks.
Problem 4. 2 marks.
Problem 5. 2 marks.
Problem 6. 2 marks.
Problem 7.a. 1 mark.
Problem 7.b. 1 mark.
Problem 8. 1 mark.
For Problems 2.a. and 2.b., 50% of the marks are allocated for the correct path cost. To get 100% of
these marks your program must produce the correct path cost as well as the correct path.
11
Similarly, 50% of the marks for Problem 3. are allocated for correctly outputting the height and
number of nodes of the binary search tree, to get 100% of the marks your program must also produce
the correct balanced binary search tree.
For each programming task there are 10 test cases (all of which are provided, i.e., there are no hidden
test cases). To get the full amount of marks for each task you must get all 10 of these test cases
correct. You will lose 20% of the available marks for each failed test case, i.e.,
Marks = max n
Maximum for Problem × (1 0.2 × Test Cases Failed), 0o.
Late Policy
A late penalty of 20% per day will be applied to submissions made after the deadline. This applies
per component, i.e.,
Grade = max n
Programming Grade 0.2 × Days Late × 11, 0o+ max n
Analysis Grade 0.2 × Days Late × 9, 0o.
For example, if you are 2 days late with the programming component but only 1 day late with the
analysis component your grade for the programming component will be reduced by 0.4×11 = 4.4 and
the grade for the analysis component will be reduced by 0.2 × 9 = 1.8.
Academic Honesty
You may make use of code provided as part of this subject’s workshops or their solutions (with proper
attribution), however you may not use code sourced from the Internet or elsewhere. Using code from
the Internet is grounds for academic misconduct.
All work is to be done on an individual basis. All submissions will be subject to automated similarity
detection. Where academic misconduct is detected, all parties involved will be referred to the School
of Engineering for handling under the University Discipline procedures. Please see the Subject Guide
and the “Academic Integrity” section of the LMS for more information.

 

因为专业，所以值得信赖。如有需要，请加QQ：99515681 或邮箱：99515681@qq.com 

微信：codinghelp