一、流程解析
start_slave
->start_slave_threads
->
if (!mi->inited || !mi->rli->inited)//如果没有初始化
{
int error= (!mi->inited ? ER_SLAVE_MI_INIT_REPOSITORY :
ER_SLAVE_RLI_INIT_REPOSITORY);
ER_SLAVE_MI_INIT_REPOSITORY
ER_SLAVE_RLI_INIT_REPOSITORY
->
if (mi->is_auto_position() && (thread_mask & SLAVE_IO) &&
get_gtid_mode(GTID_MODE_LOCK_NONE) == GTID_MODE_OFF)
ER_CANT_USE_AUTO_POSITION_WITH_GTID_MODE_OFF eng
"The replication receiver thread%-.192s cannot start in
AUTO_POSITION mode: this server uses @@GLOBAL.GTID_MODE = OFF."
-> 启动IO 线程
if (thread_mask & SLAVE_IO)
is_error= start_slave_thread(
#ifdef HAVE_PSI_INTERFACE
key_thread_slave_io,
#endif
handle_slave_io, lock_io, lock_cond_io,
cond_io,
&mi->slave_running, &mi->slave_run_id,
mi);
-> mysql_thread_create 建立线程 回调函数handle_slave_io
->handle_slave_io
->初始化IO线程属性 init_slave_thread
进入状态THD_STAGE_INFO(thd, stage_waiting_for_master_update);
->safe_connect 进行连接主库
->connect_to_master
->将参数slave_net_timeout设置为IO线程连接超时和IO线程读取Event 超时
case MYSQL_OPT_CONNECT_TIMEOUT: //MYSQL_OPT_CONNECT_TIMEOUT
mysql->options.connect_timeout= *(uint*) arg;
break;
case MYSQL_OPT_READ_TIMEOUT://MYSQL_OPT_READ_TIMEOUT
mysql->options.read_timeout= *(uint*) arg;
break;
->循环 实现连接和重新连接
-> 根据用户名、密码、IP、端口建立连接
mysql_real_connect(mysql, mi->host, user, password, 0, mi->port, 0, client_flag)
->如果连接失败 循环重连
每次打印日志
mi->report(ERROR_LEVEL, last_errno,
"error %s to master '%s@%s:%d'"
" - retry-time: %d retries: %lu",
(reconnect ? "reconnecting" : "connecting"),
mi->get_user(), mi->host, mi->port,
mi->connect_retry, err_count + 1);
if (++err_count == mi->retry_count)
{
slave_was_killed=1;
break;
}
slave_sleep(thd, mi->connect_retry, io_slave_killed, mi); //睡眠时间
每次睡眠时间为MASTER_CONNECT_RETRY设置的时间，默认60秒，循环次数由MASTER_RETRY_COUNT指定
默认86400次
->get_master_version_and_clock
->比较版本
->发起命令SELECT UNIX_TIMESTAMP() 获取主库时间
mysql_real_query(mysql, STRING_WITH_LEN("SELECT UNIX_TIMESTAMP()
计算差值用于延迟计算
mi->clock_diff_with_master= (long) (time((time_t*) 0) - strtoul(master_row[0], 0, 10));
也就是说差值计算是在start slave命令发起的时候进行计算的，后面如果修改slave的服务器时间
那么延迟计算将出现问题
->发起命令SELECT @@GLOBAL.SERVER_ID 获取主库server id
比较主库的server id和本从库是否相同，如果相同则报错
The slave I/O thread stops because master and slave have equal \
MySQL server ids; these ids must be different for replication to work (or \
the --replicate-same-server-id option must be used on slave but this does \
not always make sense; please check the manual before using it).
->发起命令SELECT @@GLOBAL.COLLATION_SERVER
如果主库的这个值和备库不一致将会报错
The slave I/O thread stops because master and slave have \
different values for the COLLATION_SERVER global variable. The values must \
be equal for the Statement-format replication to work
->发起命令SELECT @@GLOBAL.TIME_ZONE 老版本检测
比较主库和从库的时区，如果不一致
The slave I/O thread stops because master and slave have \
different values for the TIME_ZONE global variable. The values must \
be equal for the Statement-format replication to work
->发起命令SELECT @@GLOBAL.GTID_MODE
比较主库和从库的GTID MODE是否兼容
if ((slave_gtid_mode == GTID_MODE_OFF &&
master_gtid_mode >= GTID_MODE_ON_PERMISSIVE) ||
(slave_gtid_mode == GTID_MODE_ON &&
master_gtid_mode <= GTID_MODE_OFF_PERMISSIVE))
{
mi->report(ERROR_LEVEL, ER_SLAVE_FATAL_ERROR,
"The replication receiver thread cannot start because "
"the master has GTID_MODE = %.192s and this server has "
"GTID_MODE = %.192s.",
get_gtid_mode_string(master_gtid_mode),
get_gtid_mode_string(slave_gtid_mode));
DBUG_RETURN(1);
}
if (mi->is_auto_position() && master_gtid_mode != GTID_MODE_ON)
{
mi->report(ERROR_LEVEL, ER_SLAVE_FATAL_ERROR,
"The replication receiver thread cannot start in "
"AUTO_POSITION mode: the master has GTID_MODE = %.192s "
"instead of ON.",
get_gtid_mode_string(master_gtid_mode));
DBUG_RETURN(1);
}
->回到handle_slave_io
->get_master_uuid 获取主句UUID 比较UUID
发起命令SELECT @@GLOBAL.SERVER_UUID
比较主库和备库的UUID如果相同报错
"The slave I/O thread stops because master and slave have equal "
"MySQL server UUIDs; these UUIDs must be different for "
"replication to work."
->io_thread_init_commands
SET @slave_uuid= '%s' 是什么意思
->register_slave_on_master 进行注册
主库调用register_slave进行注册
注册完成后 show slave hosts就能查询到了 主库show slave会调用
show_slave_hosts 函数
->request_dump 发送需要读取的GTID或者位点信息给主库。
如果是AUTO com_binlog_dump_gtid
- restirve_gtid+execute_gtid
if (gtid_executed.add_gtid_set(mi->rli->get_gtid_set()) != RETURN_STATUS_OK ||
gtid_executed.add_gtid_set(gtid_state->get_executed_gtids()) !=
RETURN_STATUS_OK)
- server_id
主库读取
(gdb) p gtid_string
$17 = 0x7ffee400ef20 "010fde77-2075-11e9-ba07-5254009862c0:1,\ncb7ea36e-670f-11e9-b483-5254008138e4:1-16"
(gdb) p name
$18 = '\000' <repeats 16 times>, "\v\000\000\000\a\000\000\000\000\t\000\344\376\177\000\000\340\252U\354\377\177\000\000\242kL\001\000\000\000\000\002\000\000\000\000\000\000\000\346?\001\000\000\000\000\002\000\000\000\000\000\000\000\346?\001\000\000\000\000\300\252U\354\377\177\000\000L?\001\n\000\000\000ЪU\354\377\177\000\000L?\001\000\000\000\000\360\252U\354\377\177\000\000\240\343\221\001\000\000\000\000\000\253U\354\377\177\000\000\340\b\000\344\376\177\000\000\020\253U\354\377\177\000\000\"I\353\001\000\000\000\000\000\t\000\344\376\177\000\000\240\255U\354\377\177\000\000\060\253U\354\377\177\000\000\272~\356\000\000\000\000\000\v\000\000\000\005\000\000\000\240\255U\354\377\177\000\000\000\256U\354\377\177\000\000\246\323M\001\000\000\000\000\221\333/\002\000\000\000\000\030=\000\344\376\177", '\000' <repeats 18 times>, "\002\000\000\000\000\000\000\000\346?\001\000\000\000\000\016\202\036\002\000\000\000\000\250"...
(gdb) p pos
$19 = 4
不是AUTO
- server_id
- MASTER INFO 表的读取位点
- MASTER INFO 表的读取binlog文件名
主库读取 com_binlog_dump
(gdb) p pos
$1 = 3587
(gdb) p packet + 10
$3 = 0x7ffedc00a88b "binlog.000005"
我们可以看到即便开启了GTID不开启AUTO也不会根据GTID来读取。
->循环读取event
进入状态 stage_waiting_for_master_to_send_event
->将读取的event写入到 relay log
进入状态Queueing master event to the relay log
->queue_event 读取的event写入到 relay log
检测GTID event的合法性
Cannot replicate GTID-transaction when @@GLOBAL.GTID_MODE = OFF, at file %.512s, position %lld.
Cannot replicate anonymous transaction when AUTO_POSITION = 1, at file %.512s, position %lld.
Cannot replicate anonymous transaction when @@GLOBAL.GTID_MODE = ON, at file %.512s, position %lld.
->rli->relay_log.append_buffer 进行relay log写入
->MYSQL_BIN_LOG::after_append_to_relay_log //进行写入后处理
->flush_and_sync 函数根据relay log sync参数设置决定是否做sync操作 单位是event个数
->MYSQL_BIN_LOG::sync_binlog_file 判断是否进行刷盘
->can_rotate 根据这个值决定是否计入Retrieved_Gtid_Set 边界分析器
->进行relay log切换
->更改相关被变量
master 位置/master 文件
增加容量log_space_total
mi->set_master_log_pos(mi->get_master_log_pos() + inc_pos);//增加master 位置
rli->relay_log.harvest_bytes_written(&rli->log_space_total);
/*
If this event is GTID_LOG_EVENT we store its GTID to add to the
Retrieved_Gtid_Set later, when the last event of the transaction be
queued.
*/
if (event_type == binary_log::GTID_LOG_EVENT)
{
mi->set_last_gtid_queued(gtid);
}
->flush_master_info(mi, FALSE)
->Rpl_info_table::do_flush_info
通过参数sync_master设置决定多少个event 进行写table
handler->set_sync_period(sync_masterinfo_period);
if (!(force || (sync_period &&
++(sync_counter) >= sync_period)))//如果没有达到 sync的次数(sync_master_info 或者 sync_relay_log_info次数 不做flush 不写表 直接返回)
DBUG_RETURN(0);//但是relay_log_info依赖于是否是table模式如果是table模式则会在commit的时候做相应的flush Slave_worker::flush_info 二、证明sync_master_info单位是Event
设置sync_master_info=1
主库做一个大事务，观察slave_master_info表如下：
mysql> select * from slave_master_info \G;
*************************** 1. row ***************************
Number_of_lines: 25
Master_log_name: binlog.000002
Master_log_pos: 1222540 主库执行：
/mysqldata/mysql3340/bin/mysqlbinlog binlog.000002 --base64-output='decode-rows'|grep -C 10 -E "BEGIN|COMMIT" 主库event 可以看到在中间
BEGIN
/*!*/;
# at 992468
#190519 13:07:26 server id 413340 end_log_pos 992520 CRC32 0x5d85ea03 Table_map: `testmts`.`testio` mapped to number 111
# at 992520
#190519 13:07:26 server id 413340 end_log_pos 1000735 CRC32 0xfceb6697 Write_rows: table id 111
# at 1000735
#190519 13:07:26 server id 413340 end_log_pos 1008950 CRC32 0x0ca6515c Write_rows: table id 111
# at 1008950
#190519 13:07:26 server id 413340 end_log_pos 1017165 CRC32 0x21d7b17d Write_rows: table id 111
# at 1017165
--
# at 2939475
#190519 13:07:26 server id 413340 end_log_pos 2947690 CRC32 0xcb553fab Write_rows: table id 111
# at 2947690
#190519 13:07:26 server id 413340 end_log_pos 2955905 CRC32 0xd42382c9 Write_rows: table id 111
# at 2955905
#190519 13:07:26 server id 413340 end_log_pos 2964120 CRC32 0xe516b98a Write_rows: table id 111
# at 2964120
#190519 13:07:26 server id 413340 end_log_pos 2967035 CRC32 0x9cbfbc0a Write_rows: table id 111 flags: STMT_END_F
# at 2967035
#190519 13:07:26 server id 413340 end_log_pos 2967066 CRC32 0xb907da17 Xid = 45
COMMIT/*!*/;
SET @@SESSION.GTID_NEXT= 'AUTOMATIC' /* added by mysqlbinlog */ /*!*/;
DELIMITER ;
# End of log file
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=0*/;
You have mail in /var/spool/mail/root 三、测试AUTO_POSITION=1和POSTION模式下MysqlD异常重启的恢复过程
下面是 recover_relay_log=0 的情况 POS和GTID AUTO_POSITION=1不同的处理。
断点
Master_info::set_master_log_pos 设置master info io thread 读取主库的binlog pos
Relay_log_info::set_group_relay_log_pos 设置relay info sql thread 从库读取relay pos的位置 - GTID
AUTO_POSITION binlog recover_relay_log=0的情况下：
DUMP线程会重新发送最后一个事务给从库，从库使用Crash前的Relay_Log_Pos进行读取。relay log可能出现不完整的事务。这种情况会触发回滚机制。单线程会在GTID event 中回滚，MTS会由协调线程调用coord_handle_partial_binlogged_transaction回滚
change master to
master_host='192.168.99.41',
master_user='repl',
master_password='gelc123',
master_port=3340,
AUTO_POSITION=1;
start slave; 主库：
# at 912
#190519 21:22:16 server id 413340 end_log_pos 977 CRC32 0x5840ca71 GTID last_committed=1 sequence_number=2 rbr_only=yes
/*!50718 SET TRANSACTION ISOLATION LEVEL READ COMMITTED*//*!*/;
SET @@SESSION.GTID_NEXT= 'cb7ea36e-670f-11e9-b483-5254008138e4:2'/*!*/;
# at 977
#190519 21:22:16 server id 413340 end_log_pos 1052 CRC32 0xcd8345de Query thread_id=3 exec_time=13 error_code=0
SET TIMESTAMP=1558272136/*!*/;
BEGIN
/*!*/;
# at 1052
#190519 21:22:16 server id 413340 end_log_pos 1104 CRC32 0x782391dd Table_map: `testmts`.`testgp` mapped to number 108
# at 1104
#190519 21:22:16 server id 413340 end_log_pos 9319 CRC32 0x8de0fbdd Write_rows: table id 108
# at 9319
#190519 21:22:16 server id 413340 end_log_pos 17534 CRC32 0xae798162 Write_rows: table id 108
# at 17534
#190519 21:22:16 server id 413340 end_log_pos 25749 CRC32 0x683b9e95 Write_rows: table id 108
# at 25749
--
# at 477574
#190519 21:22:16 server id 413340 end_log_pos 485789 CRC32 0x44e99850 Write_rows: table id 108
# at 485789
#190519 21:22:16 server id 413340 end_log_pos 494004 CRC32 0x280300fd Write_rows: table id 108
# at 494004
#190519 21:22:16 server id 413340 end_log_pos 502219 CRC32 0x075c8ff8 Write_rows: table id 108
# at 502219
#190519 21:22:16 server id 413340 end_log_pos 503274 CRC32 0x08c3f96c Write_rows: table id 108 flags: STMT_END_F
# at 503274
#190519 21:22:16 server id 413340 end_log_pos 503305 CRC32 0x3b6dd31c Xid = 26
COMMIT/*!*/;
SET @@SESSION.GTID_NEXT= 'AUTOMATIC' /* added by mysqlbinlog */ /*!*/;
DELIMITER ;mysql> show slave status \G
*************************** 1. row ***************************
Slave_IO_State: Queueing master event to the relay log
Master_Host: 192.168.99.41
Master_User: repl
Master_Port: 3340
Connect_Retry: 60
Master_Log_File: binlog.000001
Read_Master_Log_Pos: 165404
Relay_Log_File: relay.000002
Relay_Log_Pos: 1119
Relay_Master_Log_File: binlog.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yescrash 后
mysql> show slave status \G
*************************** 1. row ***************************
Slave_IO_State:
Master_Host: 192.168.99.41
Master_User: repl
Master_Port: 3340
Connect_Retry: 60
Master_Log_File: binlog.000001
Read_Master_Log_Pos: 190049
Relay_Log_File: relay.000002
Relay_Log_Pos: 1119
Relay_Master_Log_File: binlog.000001不完整的事物日志如下：
# at 1119
#190519 21:22:16 server id 413340 end_log_pos 977 CRC32 0x5840ca71 GTID last_committed=1 sequence_number=2 rbr_only=yes
/*!50718 SET TRANSACTION ISOLATION LEVEL READ COMMITTED*//*!*/;
SET @@SESSION.GTID_NEXT= 'cb7ea36e-670f-11e9-b483-5254008138e4:2'/*!*/;
# at 1184
#190519 21:22:16 server id 413340 end_log_pos 1052 CRC32 0xcd8345de Query thread_id=3 exec_time=13 error_code=0
SET TIMESTAMP=1558272136/*!*/;
BEGIN
/*!*/;
# at 1259
#190519 21:22:16 server id 413340 end_log_pos 1104 CRC32 0x782391dd Table_map: `testmts`.`testgp` mapped to number 108
# at 1311
#190519 21:22:16 server id 413340 end_log_pos 9319 CRC32 0x8de0fbdd Write_rows: table id 108
# at 9526
#190519 21:22:16 server id 413340 end_log_pos 17534 CRC32 0xae798162 Write_rows: table id 108
# at 17741
#190519 21:22:16 server id 413340 end_log_pos 25749 CRC32 0x683b9e95 Write_rows: table id 108
# at 25956
WARNING: The range of printed events ends with a row event or a table map event that does not have
the STMT_END_F flag set. This might be because the last statement was not fully written to the log,
or because you are using a --stop-position or --stop-datetime that refers to an event in the middle of a statement.
The event(s) from the partial statement have not been written to output.启动后 IO_THREAD
mysql> show slave status \G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.99.41
Master_User: repl
Master_Port: 3340
Connect_Retry: 60
Master_Log_File: binlog.000001
Read_Master_Log_Pos: 503305
Relay_Log_File: relay.000002
Relay_Log_Pos: 1119
Relay_Master_Log_File: binlog.000001
Slave_IO_Running: Yes
Slave_SQL_Running: No 启动IO TRHEAD后 重新传输了，但是老的没有完全传输完成的日志还在relay log
新的日志已经有了 ，老的也还在。
# at 445
#190519 21:22:16 server id 413340 end_log_pos 977 CRC32 0x5840ca71 GTID last_committed=1 sequence_number=2 rbr_only=yes
/*!50718 SET TRANSACTION ISOLATION LEVEL READ COMMITTED*//*!*/;
SET @@SESSION.GTID_NEXT= 'cb7ea36e-670f-11e9-b483-5254008138e4:2'/*!*/;
# at 510
#190519 21:22:16 server id 413340 end_log_pos 1052 CRC32 0xcd8345de Query thread_id=3 exec_time=13 error_code=0
SET TIMESTAMP=1558272136/*!*/;
SET @@session.pseudo_thread_id=3/*!*/;
SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=0, @@session.unique_checks=1, @@session.autocommit=1/*!*/;
SET @@session.sql_mode=1075838976/*!*/;
SET @@session.auto_increment_increment=1, @@session.auto_increment_offset=1/*!*/;
/*!\C utf8 *//*!*/;
SET @@session.character_set_client=83,@@session.collation_connection=83,@@session.collation_server=33/*!*/;
SET @@session.lc_time_names=0/*!*/;
SET @@session.collation_database=DEFAULT/*!*/;
BEGIN
/*!*/;
# at 585
#190519 21:22:16 server id 413340 end_log_pos 1104 CRC32 0x782391dd Table_map: `testmts`.`testgp` mapped to number 108
# at 637
#190519 21:22:16 server id 413340 end_log_pos 9319 CRC32 0x8de0fbdd Write_rows: table id 108
# at 8852
#190519 21:22:16 server id 413340 end_log_pos 17534 CRC32 0xae798162 Write_rows: table id 108
# at 17067
#190519 21:22:16 server id 413340 end_log_pos 25749 CRC32 0x683b9e95 Write_rows: table id 108 (以上本来已经传输了)
# at 25282
--
# at 477107
#190519 21:22:16 server id 413340 end_log_pos 485789 CRC32 0x44e99850 Write_rows: table id 108
# at 485322
#190519 21:22:16 server id 413340 end_log_pos 494004 CRC32 0x280300fd Write_rows: table id 108
# at 493537
#190519 21:22:16 server id 413340 end_log_pos 502219 CRC32 0x075c8ff8 Write_rows: table id 108
# at 501752
#190519 21:22:16 server id 413340 end_log_pos 503274 CRC32 0x08c3f96c Write_rows: table id 108 flags: STMT_END_F
# at 502807
#190519 21:22:16 server id 413340 end_log_pos 503305 CRC32 0x3b6dd31c Xid = 26
COMMIT/*!*/;- POSITION
在 recover_relay_log=0的情况下从库会从Read_Master_Log_Pos的位置接着拉取replay log，一旦Read_Master_Log_Pos和replay log出现问题那么将会导致从库异常。主库只需要从Relay_Log_Pos的位置应用即可。因此参数 - sync_relay_log=1
- sync_master_info=1
是必须的。
change master to
master_host='192.168.99.41',
master_user='repl',
master_password='gelc123',
master_port=3340,
MASTER_LOG_FILE='binlog.000001',
MASTER_LOG_POS=154;
start slave; mysql> show slave status \G;
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.99.41
Master_User: repl
Master_Port: 3340
Connect_Retry: 60
Master_Log_File: binlog.000001
Read_Master_Log_Pos: 912
Relay_Log_File: relay.000002
Relay_Log_Pos: 1075
Relay_Master_Log_File: binlog.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes写入途中：
mysql> show slave status \G;
*************************** 1. row ***************************
Slave_IO_State: Queueing master event to the relay log
Master_Host: 192.168.99.41
Master_User: repl
Master_Port: 3340
Connect_Retry: 60
Master_Log_File: binlog.000001
Read_Master_Log_Pos: 124329
Relay_Log_File: relay.000002
Relay_Log_Pos: 1075
Relay_Master_Log_File: binlog.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes主库binlog：
BEGIN
/*!*/;
# at 1052
#190519 16:43:43 server id 413340 end_log_pos 1104 CRC32 0x1b959719 Table_map: `testmts`.`testgp` mapped to number 108
# at 1104
#190519 16:43:43 server id 413340 end_log_pos 9319 CRC32 0x98ff5e73 Write_rows: table id 108
# at 9319
#190519 16:43:43 server id 413340 end_log_pos 17534 CRC32 0xbb6624cc Write_rows: table id 108
# at 17534
#190519 16:43:43 server id 413340 end_log_pos 25749 CRC32 0x7d243b3b Write_rows: table id 108
# at 25749
--
# at 477574
#190519 16:43:43 server id 413340 end_log_pos 485789 CRC32 0x51f63dfe Write_rows: table id 108
# at 485789
#190519 16:43:43 server id 413340 end_log_pos 494004 CRC32 0x3d1ca553 Write_rows: table id 108
# at 494004
#190519 16:43:43 server id 413340 end_log_pos 502219 CRC32 0x12432a56 Write_rows: table id 108
# at 502219
#190519 16:43:43 server id 413340 end_log_pos 503274 CRC32 0x4373f461 Write_rows: table id 108 flags: STMT_END_F
# at 503274
#190519 16:43:43 server id 413340 end_log_pos 503305 CRC32 0xe33a6266 Xid = 60
COMMIT/*!*/;Crash启动后日志如下：
# at 321652
#190519 16:43:43 server id 413340 end_log_pos 329704 CRC32 0xbf87ced1 Write_rows: table id 108
# at 329867
#190519 16:43:43 server id 413340 end_log_pos 337919 CRC32 0x2f3bd840 Write_rows: table id 108
# at 338082
#190519 16:43:43 server id 413340 end_log_pos 346134 CRC32 0xe317c093 Write_rows: table id 108
# at 346297
#190519 16:43:43 server id 413340 end_log_pos 354349 CRC32 0x81e3ea0d Write_rows: table id 108
# at 354512
#190519 16:43:43 server id 413340 end_log_pos 362564 CRC32 0x7f51fc3a Write_rows: table id 108
# at 362727
#190519 16:25:17 server id 953340 end_log_pos 362770 CRC32 0xb6611a85 Rotate to relay.000003 pos: 4
WARNING: The range of printed events ends with a row event or a table map event that does not have the STMT_END_F flag set. This might be because the last statement was not fully written to the log, or because you are using a --stop-position or --stop-datetime that refers to an event in the middle of a statement. The event(s) from the partial statement have not been written to output.
ROLLBACK /* added by mysqlbinlog */ /*!*/;
SET @@SESSION.GTID_NEXT= 'AUTOMATIC' /* added by mysqlbinlog */ /*!*/;
DELIMITER ;
# End of log file
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=0*/;
[root@gp1 log]# /mysqldata/mysql3340/bin/mysqlbinlog --base64-output='decode-rows' relay.000003
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=1*/;
/*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
DELIMITER /*!*/;
# at 4
#190519 16:25:17 server id 953340 end_log_pos 123 CRC32 0xe6fd01bf Start: binlog v 4, server v 5.7.22-22-debug-log created 190519 16:25:17
# This Format_description_event appears in a relay log and was generated by the slave thread.
# at 123
#190519 16:25:17 server id 953340 end_log_pos 154 CRC32 0xde5482b5 Previous-GTIDs
# [empty]
# at 154
#700101 8:00:00 server id 413340 end_log_pos 0 CRC32 0x86e86060 Rotate to binlog.000001 pos: 362564
# at 198
#190519 16:42:31 server id 413340 end_log_pos 0 CRC32 0x5361aca0 Start: binlog v 4, server v 5.7.22-22-debug-log created 190519 16:42:31
# at 317
#190519 16:43:43 server id 413340 end_log_pos 370779 CRC32 0x8b7abae8 Write_rows: table id 108
# at 8532
#190519 16:43:43 server id 413340 end_log_pos 378994 CRC32 0x28e1279c Write_rows: table id 108
# at 16747
#190519 16:43:43 server id 413340 end_log_pos 387209 CRC32 0x278d98ed Write_rows: table id 108
# at 24962
#190519 16:43:43 server id 413340 end_log_pos 395424 CRC32 0x85d21655 Write_rows: table id 108
# at 33177
#190519 16:43:43 server id 413340 end_log_pos 403639 CRC32 0x156e00c4 Write_rows: table id 108
# at 41392
#190519 16:43:43 server id 413340 end_log_pos 411854 CRC32 0xed83b3ac Write_rows: table id 108
# at 49607
#190519 16:43:43 server id 413340 end_log_pos 420069 CRC32 0x465939b4 Write_rows: table id 108
# at 57822
#190519 16:43:43 server id 413340 end_log_pos 428284 CRC32 0xaab146d2 Write_rows: table id 108
# at 66037
#190519 16:43:43 server id 413340 end_log_pos 436499 CRC32 0x97f1428f Write_rows: table id 108
WARNING: The range of printed events ends with a row event or a table map event that does not have the STMT_END_F flag set. This might be because the last statement was not fully written to the log, or because you are using a --stop-position or --stop-datetime that refers to an event in the middle of a statement. The event(s) from the partial statement have not been written to output.
SET @@SESSION.GTID_NEXT= 'AUTOMATIC' /* added by mysqlbinlog */ /*!*/;
DELIMITER ;
# End of log file
/*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/;
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=0*/;
[root@gp1 log]# /mysqldata/mysql3340/bin/mysqlbinlog --base64-output='decode-rows' relay.000005
/*!50530 SET @@SESSION.PSEUDO_SLAVE_MODE=1*/;
/*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
DELIMITER /*!*/;
# at 4
#190519 16:31:57 server id 953340 end_log_pos 123 CRC32 0xecc598ac Start: binlog v 4, server v 5.7.22-22-debug-log created 190519 16:31:57
# This Format_description_event appears in a relay log and was generated by the slave thread.
# at 123
#190519 16:31:57 server id 953340 end_log_pos 154 CRC32 0x21c8a43a Previous-GTIDs
# [empty]
# at 154
#700101 8:00:00 server id 413340 end_log_pos 0 CRC32 0xeed34528 Rotate to binlog.000001 pos: 428284
# at 198
#190519 16:42:31 server id 413340 end_log_pos 0 CRC32 0x5361aca0 Start: binlog v 4, server v 5.7.22-22-debug-log created 190519 16:42:31
# at 317
#190519 16:43:43 server id 413340 end_log_pos 436499 CRC32 0x97f1428f Write_rows: table id 108
# at 8532
#190519 16:43:43 server id 413340 end_log_pos 444714 CRC32 0xfd447f7d Write_rows: table id 108
# at 16747
#190519 16:43:43 server id 413340 end_log_pos 452929 CRC32 0xc4c67bff Write_rows: table id 108
# at 24962
#190519 16:43:43 server id 413340 end_log_pos 461144 CRC32 0x6dbd096a Write_rows: table id 108
# at 33177
#190519 16:43:43 server id 413340 end_log_pos 469359 CRC32 0xb42d58b6 Write_rows: table id 108
# at 41392
#190519 16:43:43 server id 413340 end_log_pos 477574 CRC32 0x7a2e502d Write_rows: table id 108
# at 49607
#190519 16:43:43 server id 413340 end_log_pos 485789 CRC32 0x51f63dfe Write_rows: table id 108
# at 57822
#190519 16:43:43 server id 413340 end_log_pos 494004 CRC32 0x3d1ca553 Write_rows: table id 108
# at 66037
#190519 16:43:43 server id 413340 end_log_pos 502219 CRC32 0x12432a56 Write_rows: table id 108
# at 74252
#190519 16:43:43 server id 413340 end_log_pos 503274 CRC32 0x4373f461 Write_rows: table id 108 flags: STMT_END_F
# at 75307
#190519 16:43:43 server id 413340 end_log_pos 503305 CRC32 0xe33a6266 Xid = 60
COMMIT/*!*/;
SET @@SESSION.GTID_NEXT= 'AUTOMATIC' /* added by mysqlbinlog */ /*!*/;从 end_log_pos 可以看到他们凑成了一个完整的事务日志。chang