#ifndef __KEY_H
#define __KEY_H     



#define KEY0  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_12)//读取按键0
#define KEY1  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_13)//读取按键1
#define KEY2  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_14)//读取按键2 
#define KEY3  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_15)//读取按键3

#define KEY4  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_4)//读取按键0
#define KEY5  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_5)//读取按键1
#define KEY6  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_6)//读取按键2 
#define KEY7  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_7)//读取按键3
#define KEY8  GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_8)//读取按键3




void KEY_Init(void);//IO初始化
                    
#endif

#include "stm32f10x.h"
#include <stdio.h>
#include "sys.h"
#include "delay.h"
#include "oled.h"
#include "24l01.h"
#include "key.h"

  
/* OLED
SCL-D0--PC15
SDA-D1--PC14   
RST---PC13    
DC---PB4*/

/*
        2401--SPI1 
        MISO-PA6 SCK-PA5     CE-PB3
        IRQ-PA3  MOSI-PA7 CSN-PA2
*/

  
// c8t6


 u8 tmp_buf[1] ;

int main(void)
{
    Stm32_Clock_Init(9);//系统时钟设置为外部晶振，9倍频
    delay_init(72);//系统SysTick初始化
    JTAG_Set(JTAG_SWD_DISABLE);     //=====关闭JTAG接口
    JTAG_Set(SWD_ENABLE);           //=====打开SWD接口 可以利用主板的SWD接口调试
  OLED_Init();
    KEY_Init();
    //NRF24L01_Init();                //=====NRF24L01无线模块初始化
 // NRF24L01_FindMyself();          //=====NRF24L01无线模块检查 检测不到就停在这边自检闪灯
     //tmp_buf[0]= 1 ;
    while (1)
    { 
     
              // TX_Mode(); 
              
                     
                 //     OLED_ShowNumber(0,30,tmp_buf[0],5,12);
               //    NRF24L01_TxPacket(tmp_buf);    
                            
     if(KEY0 == 0)
         {
             delay_ms(10); 
             OLED_ShowString(0,20,"Key0");
            
         }
         if(KEY1 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key1");
         }
         if(KEY2 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key2");
         }
         if(KEY3 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key3");
         }     
         
          if(KEY4 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key4");
         }     
         
         
          if(KEY5 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key5");
         }     
         
       if(KEY6 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key6");
         }     
         
          if(KEY7 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key7");
         }     
         
          if(KEY8 == 0)
         {
              delay_ms(10);
              OLED_ShowString(0,20,"Key8");
         }     
         
          
         OLED_Refresh_Gram();
  }
               
    }