getevent
getevent -r -q 监控设备的sendevent事件
root@android:/ # getevent -h
Usage: getevent [-t] [-n] [-s switchmask] [-S] [-v [mask]] [-d] [-p] [-i] [-l] [-q] [-c count] [-r] [device]
-t: show time stamps
-n: don't print newlines
-s: print switch states for given bits
-S: print all switch states
-v: verbosity mask (errs=1, dev=2, name=4, info=8, vers=16, pos. events=32, props=64)
-d: show HID descriptor, if available
-p: show possible events (errs, dev, name, pos. events)
-i: show all device info and possible events
-l: label event types and names in plain text
-q: quiet (clear verbosity mask)
-c: print given number of events then exit
-r: print rate events are received
显示格式说明
root@android:/ # getevent
/dev/input/event5: 0005 0002 00000001
device的名字：事件类型 键码类别 具体的数值
/dev/input/event5: 0000 0000 00000000
表示一次输入结束/*
* Event types
*/
#define EV_SYN 0x00
#define EV_KEY 0x01
#define EV_REL 0x02
#define EV_ABS 0x03
#define EV_MSC 0x04
#define EV_SW 0x05
#define EV_LED 0x11
#define EV_SND 0x12
#define EV_REP 0x14
#define EV_FF 0x15
#define EV_PWR 0x16
#define EV_FF_STATUS 0x17
#define EV_MAX 0x1f
#define EV_CNT (EV_MAX+1)二. 具体应用, 比如需要查看audio jack的事件，也就是耳机的插入
1. 首先确认耳机插入的事件是啥
r
oot@android:/ # getevent -i
add device 1: /dev/input/event2
bus: 0000
vendor 0000
product 0000
version 0000
name: "pmic8xxx_pwrkey"
location: "pmic8xxx_pwrkey/input0"
id: ""
version: 1.0.1
events:
KEY (0001): 0074
input props:
<none>
.....
add device 5: /dev/input/event10
bus: 0000
vendor 0000
product 0000
version 0000
name: "msm8960-snd-card Headset Jack"
location: "ALSA"
id: ""
version: 1.0.1
events:
SW (0005): 0002* 0004* 0006 000e 000f 0010
input props:
<none>
add device 6: /dev/input/event9
bus: 0000
vendor 0000
product 0000
version 0000
name: "msm8960-snd-card Button Jack"
location: "ALSA"
id: ""
version: 1.0.1
events:
KEY (0001): 0100 0101 0102 0103 0104 0105 0106 0107
input props:
<none>2. 输出 audio jack事件
用的event type是#define EV_SW 0x05
/*
* Switch events
*/
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
set = radio enabled */
#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
#define SW_DOCK 0x05 /* set = plugged into dock */
#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_HPHL_OVERCURRENT 0x0e /* set = over current on left hph */
#define SW_HPHR_OVERCURRENT 0x0f /* set = over current on right hph */
#define SW_UNSUPPORT_INSERT 0x10 /* set = unsupported device inserted */
#define SW_MAX 0x20
#define SW_CNT (SW_MAX+1)
root@android:/ # getevent /dev/input/event10
0005 0002 00000001 (0002 表示earphone)
0005 0004 00000001 (0004 表示microphone)
0000 0000 00000000
插入 拔出
Headset 0005 0002 00000001
0005 0004 00000001
0000 0000 00000000 0005 0002 00000000
0005 0004 00000000
0000 0000 00000000
Headphone 0005 0002 00000001
0000 0000 00000000 0005 0002 00000000
0000 0000 00000000
invalid 0005 0010 00000001
0000 0000 00000000 0005 0010 00000000
0000 0000 00000000三、具体应用, 比如需要查看touch的事件
1、确认touch事件路径
root@android:/ # getevent -i
add device 13: /dev/input/event7
bus: 0000
vendor 0000
product 0000
version 0000
name: "cyttsp4_mt"
location: "cyttsp4_mt.main_ttsp_core"
id: ""
version: 1.0.1
events:
ABS (0003): 0000 : value 0, min 0, max 0, fuzz 0, flat 0, resolution 0
2、touch 事件
用的event type是#define EV_ABS 0x03
只分析多touch事件
#define ABS_MT_SLOT 0x2f /* MT slot being modified */
#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
root@android:/ # getevent /dev/input/event7
单点触摸
0003 0039 000000d5 //触点区分的唯一ID
0003 0035 00000165 //触点的x坐标
0003 0036 000002fa //触点的y坐标
0003 003a 00000025 //触点的压力，实际上是接触区域大小
0000 0000 00000000 //结束
多点触摸
0003 0039 000000de
0003 0035 00000140
0003 0036 0000047f
0003 003a 00000021
0000 0000 00000000
0003 0035 0000013f
0003 003a 00000027
0003 002f 00000001 //切换上报其中一点
0003 0039 000000df
0003 0035 000001fd
0003 0036 000001e3
0003 003a 00000022
0000 0000 00000000
0003 002f 00000000 //切换上报其中一点
0003 0036 0000047e
0003 003a 0000002b
0000 0000 00000000
0003 0036 0000047d
0003 003a 0000002f
0000 0000 00000000
0003 0036 0000047b
0003 003a 00000034
0003 002f 00000001 //切换上报其中一点
0003 0035 000001fc
0003 0036 000001e6
0003 003a 00000023
0000 0000 00000000
三、getevent 源代码分析
＠system/core/toolbox/getevent.c
int getevent_main(int argc, char *argv[])
{
const char *device_path = "/dev/input"; //读取的路径
....
res = scan_dir(device_path, print_flags); //扫描路径下的所有文件路径
....
while(1) {
...
res = read(ufds[i].fd, &event, sizeof(event)); //读取事件
...
print_event(event.type, event.code, event.value, print_flags); //打印出事件信息
}
}
四、sendevent源代码分析
@system/core/toolbox/sendevent.c
sendevent
1. 模拟插入耳机， 这时候可以启动收音机了（不再有耳机没有的提示框）
sendevent /dev/input/event10 0005 0002 00000001
sendevent /dev/input/event10 0000 0000 00000000
input 根据avd和真机的不同，参数可能不同
$ input
usage: input [text|keyevent]
input text <string>
input keyevent <event_code>
4.可能遇到的问题
实际实现的时候，还可能遇到问题
一是root，getevent和sendevent需要/dev/input/event*的权限。一般应用是没有这个权限的，需要在程序里面获取su后，执行chmod 666 /dev/input/event*。
二是设备名称。因为你不知道触摸屏或者按键到底对应的event*是多少。需要有一个初始化的过程，大致思路是往event0-event9分别写入按键和触摸信号，同时监听activity里的onkeydown和view的onclick，这样来侦测设备。
三是厂商的实现不一样，这个没办法，只能一个一个适配了，一般来说都还是标准的，有些厂商会有单独的实现。
参考
http://lxr.free-electrons.com/source/include/uapi/linux/input.h#L803
http://source.android.com/tech/input/touch-devices.html
http://cjix.info/blog/misc/internal-input-event-handling-in-the-linux-kernel-and-the-android-userspace/
推荐参考网址：http://www.jtben.com/document/919575