Oracle job 无法自动运行 报以下大量的错 Errors in file /oracle/admin/orcl/bdump/orcl_j000_2158798.trc: ORA-12012: error on auto execute of job 482 ORA-12008: error in materialized view refresh path ORA-12170: TNS:Connect timeout occurred ORA-06512: at "SYS.DBMS_SNAPSHOT", line 1883 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2089 ORA-06512: at "SYS.DBMS_IREFRESH", line 683 ORA-06512: at "SYS.DBMS_REFRESH", line 195 ORA-06512: at line 1 Sat Apr 26 21:57:53 2014 Errors in file /oracle/admin/orcl/bdump/orcl_j000_2158798.trc: ORA-12012: error on auto execute of job 425 ORA-12170: TNS:Connect timeout occurred ORA-06512: at "SYS.DBMS_SNAPSHOT", line 1883 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2089 ORA-06512: at "SYS.DBMS_IREFRESH", line 683 ORA-06512: at "SYS.DBMS_REFRESH", line 195 主要环境介绍，两个数据库之间要刷新物化视图，平时都是正常的，某天开始主库的自动job执行失败，而且是持续的失败 查看原因主要是ORA-12170: TNS:Connect timeout occurred TNS超时所致，排查思路大概可以定在网络上 1.网络排查 在两台主机之间互相ping各自的IP地址和网关，看有无丢包情况 期初查看经查看无丢包 2.查看防火墙1521端口是否正常 网络工程师确认防火墙1521端口正常开放，telnet 1521也是通的 3.tnsping 各自的服务名 $tnsping orcl TNS Ping Utility for 64-bit Aix: Version 10.2.0.4.0 - Production on 05-6月 -2014 11:47:24 Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved. Attempting to contact (DESCRIPTION= (ADDRESS_LIST = (ADDRESS=(PROTOCOL=TCP)(HOST =192.168.10.8)(PORT = 1521))) (CONNECT_DATA= (SERVICE_NAME=orcl))) OK (0 msec) OK (10 msec) $tnsping yyzf TNS Ping Utility for 64-bit Aix: Version 10.2.0.4.0 - Production on 05-6月 -2014 11:48:24 Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved. Attempting to contact (DESCRIPTION= (ADDRESS_LIST = (ADDRESS=(PROTOCOL=TCP)(HOST =192.168.11.9)(PORT = 1521))) (CONNECT_DATA= (SERVICE_NAME=yyzf))) OK (0 msec) OK (10 msec) tnsping服务名也是OK的 4.到此为止所有网络看似都正常，网络似乎应该不存在问题，但job还是一直是报错，由于两台主机不再同一个网段，ping任务在持续，忽然在某几个时刻有丢包现象，telnet 1521端口也存在某几次不通的现象这么看来网络还是有问题，最后跟客户确认说是有人重新规划过网络，于是查看主机ip和路由 Command: OK stdout: yes stderr: no Before command completion, additional instructions may appear below. Routing tables Destination Gateway Flags Refs Use If Exp Groups Route tree for Protocol Family 2 (Internet): default 192.168.10.1 UG 60 442255197 en0 - - => default 192.168.10.254 UG 40 432853407 en0 - - 10.0.0.0 10.0.0.1 UHSb 0 0 en1 - - => 10/27 10.0.0.1 U 1 11339108 en1 - - 10.0.0.1 127.0.0.1 UGHS 0 1840821 lo0 - - 10.0.0.31 10.0.0.1 UHSb 0 10 en1 - - 10.0.1.0 10.0.1.1 UHSb 0 0 en0 - - => 10.0.1/27 10.0.1.1 U 2 12382572 en0 - - 10.0.1.1 127.0.0.1 UGHS 2 3268795 lo0 - - 10.0.1.31 10.0.1.1 UHSb 0 10 en0 - - 127/8 127.0.0.1 U 31 6493884 lo0 - - 192.168.10.0 192.168.10.9 UHSb 0 0 en0 - - => 192.168.10.0 192.168.10.10 UHSb 0 0 en1 - - => 192.168.10/27 192.168.10.9 U 0 193565 en0 - - => 192.168.10/27 192.168.10.10 U 1 209927 en1 - - 192.168.10.9 127.0.0.1 UGHS 23 13738093 lo0 - - 192.168.10.10 127.0.0.1 UGHS 0 151330 lo0 - - 192.168.10.31 192.168.10.9 UHSb 0 0 en0 - - => 192.168.10.31 192.168.10.10 UHSb 0 0 en1 - - Route tree for Protocol Family 24 (Internet v6): ::1 ::1 UH 0 0 lo0 - - 这样看来，主机的路由还是存在问题的,主机存在两条默认路由 在AIX中如果有默认网关设置多个的话，会存在时断时续的丢包现象，于是进入AIX的路由表查看，果然存在两条默认路由，192.168.10.1和192.168.10.254,同一个网卡存在这样两条路由肯定是有问题的，两条路由的use使用都很高，与网络工程师确认后.254的路由是无效的，存在的原因可能是在之前修改路由的时候忘记***旧的路由导致 于是***废弃的路由 >#route delete -if en0 default 192.168.10.254 192.168.10.254 net default: gateway 192.168.10.254 ***路由后，观察一小时，所有job均执行正常，没有再出现TNS超时现象 看来，修改生产系统的任何参数都要按照严格的标准和检查流程才行，稳定重于一切
本文出自 “O Record” 博客，请务必保留此出处http://evils798.blog.51cto.com/8983296/1420950
ORA-12170: TNS:Connect timeout occurred ORA-06512: at "SYS.DBMS_SNAPSHOT",布布扣,bubuko.com
ORA-12170: TNS:Connect timeout occurred ORA-06512: at "SYS.DBMS_SNAPSHOT"