连接好Console线后，将交换机开机，在SecureCRT上会显示如下信息：

Starting......

RAMLine.....OK

System is booting................

    ************************************************************************

    *                                                                      *

    *                       BOOTROM, Version 3.03                          *

    *                                                                      *

    ************************************************************************

    Creation Date       : Apr 19 2011

    CPU Type            : BCM1125H

    CPU L1 Cache        : 32KB

    CPU Clock Speed     : 600MHz

    Memory Type         : DDR SDRAM

    Memory Size         : 512MB

    Memory Speed        : 133MHz

    BootRom Size        : 512KB

    Flash Size          : 64MB

    CPLD Version        : 006

    PCB Version         : Ver.A

    Mac Address         : 0000FC006504

Press Ctrl+B to enter Boot Menu...0

Starting to get the main application file--flash:/linux!.......................

...............................................................................

...............................................................................

............................

The main application file is self-decompressing................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

.................................................................done!OK

System is starting...

User interface aux0 is available.

Press ENTER to get started.

<H3C>

#Jun 26 18:51:15:266 2017 H3C SHELL/4/LOGIN:

 Trap 1.3.6.1.4.1.2011.10.2.2.1.1.3.0.1<h3cLogIn>: login from Console

%Jun 26 18:51:15:286 2017 H3C SHELL/5/SHELL_LOGIN: Console logged in from aux0.

<H3C>

#Jun 26 18:51:37:807 2017 H3C DEVM/1/BOARD STATE CHANGES TO NORMAL:

 Trap 1.3.6.1.4.1.2011.2.23.1.12.1.11<hwBoardNormal>: chassisIndex is 0, slotIndex 0.3

%Jun 26 18:51:37:827 2017 H3C DEVM/5/BOARD_STATE_NORMAL: Board state changes to NORMAL on Chassis 0 Slot 3, type is LSQ4PT16PSC.

%Jun 26 18:52:04:435 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/3: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:04:456 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/3 link status is UP.

%Jun 26 18:52:05:674 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/2: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:05:694 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/2 link status is UP.

%Jun 26 18:52:06:915 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/1: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:06:936 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/1 link status is UP.

%Jun 26 18:52:08:158 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/8: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:08:178 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/8 link status is UP.

%Jun 26 18:52:09:407 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/7: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:09:427 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/7 link status is UP.

%Jun 26 18:52:10:654 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/6: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:10:674 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/6 link status is UP.

%Jun 26 18:52:11:895 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/5: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:11:915 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/5 link status is UP.

%Jun 26 18:52:13:137 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/11: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:13:157 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/11 link status is UP.

%Jun 26 18:52:14:381 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/10: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:14:402 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/10 link status is UP.

%Jun 26 18:52:18:043 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/12 link status is UP.

%Jun 26 18:52:19:248 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/12: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:20:714 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/9: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:20:734 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/9 link status is UP.

%Jun 26 18:52:22:116 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/16: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:22:136 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/16 link status is UP.

%Jun 26 18:52:23:523 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/15: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:23:543 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/15 link status is UP.

%Jun 26 18:52:25:077 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/14: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:25:097 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/14 link status is UP.

%Jun 26 18:52:26:489 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/13: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:26:510 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/13 link status is UP.

%Jun 26 18:52:28:111 2017 H3C EPON/4/OPTIC MODULE: -Slot=3;

 Olt3/0/4: the transceiver type is 1000_BASE_PX_SFP. 

%Jun 26 18:52:28:132 2017 H3C IFNET/3/LINK_UPDOWN: Olt3/0/4 link status is UP.

出现"Press ENTER to get started."提示信息，标志着H3C路由器的启动已经完成。