Understanding Layouts in SWT(from eclipse.org)

Understanding Layouts in SWT

Summary

When writing applications in SWT, you may need to use layouts to give your windows a specific look. A layout controls the position and size of children in a Composite. Layout classes are subclasses of the abstract class Layout. This article shows you how to work with standard layouts, and write your own custom layout class.

By Carolyn MacLeod, OTI
March 22, 2001
Revised by Shantha Ramachandran, OTI
May 02, 2002
Revised by Wayne Beaton, The Eclipse Foundation
May 30, 2008
Revised by Wayne Beaton, The Eclipse Foundation
May 13, 2009

Overview

When writing applications in the Standard Widget Toolkit (SWT), you may need to use layouts to give your windows a specific look. A layout controls the position and size of children in a Composite. Layout classes are subclasses of the abstract class Layout. SWT provides several standard layout classes, and you can write custom layout classes.

In SWT, positioning and sizing does not happen automatically. Applications can decide to size and place a Composite‘s children initially, or in a resize listener. Another option is to specify a layout class to position and size the children. If children are not given a size, they will have zero size and they cannot be seen.

The diagram below illustrates a few general terms that are used when discussing layouts. The Composite (in this case, a TabFolder) has alocationclientArea and trim. The size of the Composite is the size of the clientArea plus the size of the trim. This Composite has two children that are laid out side by side. A Layout is managing the size and position of the children. This Layout allows spacing between the children, and a margin between the children and the edges of the Layout. The size of the Layout is the same as the size of theComposite‘s clientArea.

Understanding Layouts in SWT(from eclipse.org)

The preferred size of a widget is the minimum size needed to show its content. In the case of a Composite, the preferred size is the smallest rectangle that contains all of its children. If children have been positioned by the application, the Composite computes its own preferred size based on the size and position of the children. If a Composite is using a layout class to position its children, it asks the Layout to compute the size of its clientArea, and then it adds in the trim to determine its preferred size.

Standard Layouts

The standard layout classes in the SWT library are:

  • FillLayout lays out equal-sized widgets in a single row or column
  • RowLayout lays out widgets in a row or rows, with fill, wrap, and spacing options
  • GridLayout lays out widgets in a grid
  • FormLayout lays out widgets by creating attachments for each of their sides

To use the standard layouts, you need to import the SWT layout package:

import org.eclipse.swt.layout.*;

Layouts are pluggable. To set a Composite widget‘s layout, you use the widget‘s setLayout(Layout) method. In the following code, a Shell(a subclass of Composite) is told to position its children using a RowLayout:

Shell shell = new Shell();
shell.setLayout(new RowLayout());

A layout class may have a corresponding layout data class: a subclass of Object that contains layout data for a specific child. By convention, layout data classes are identified by substituting "Data" for "Layout" in the class name. For example, the standard layout class RowLayout has a layout data class called RowData, the layout class GridLayout uses a layout data class called GridData, and the layout class FormLayout has a layout data class called FormData. A widget‘s layout data class is set as follows:

Button button = new Button(shell, SWT.PUSH);
button.setLayoutData(new RowData(50, 40));

Examples in this Document

Most of the snapshots in this document were taken by running variations on the following example code. We may change the type of layout, the options used, or the type or number of children.

import org.eclipse.swt.SWT;
import org.eclipse.swt.layout.RowLayout;
import org.eclipse.swt.widgets.Button;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Shell;

public class LayoutExample {
    public static void main(String[] args) {
        Display display = new Display();
        Shell shell = new Shell(display);
        // Create the layout.
        RowLayout layout = new RowLayout();
        // Optionally set layout fields.
        layout.wrap = true;
        // Set the layout into the composite.
        shell.setLayout(layout);
        // Create the children of the composite.
        new Button(shell, SWT.PUSH).setText("B1");
        new Button(shell, SWT.PUSH).setText("Wide Button 2");
        new Button(shell, SWT.PUSH).setText("Button 3");
        shell.pack();
        shell.open();
        
        while (!shell.isDisposed()) {
            if (!display.readAndDispatch()) display.sleep();
        }
    }
}

Running the above code results in the following:

Understanding Layouts in SWT(from eclipse.org)

If the user resizes the shell so that there is no longer room for Button 3 on the right, the RowLayout wraps Button 3 to the next row, as follows:

Understanding Layouts in SWT(from eclipse.org)

Using layouts is closely tied with resize, as we shall see. Consequently, most of the examples in this document show what would happen if the Composite becomes smaller or larger, in order to illustrate how the Layout works.

FillLayout

FillLayout is the simplest layout class. It lays out widgets in a single row or column, forcing them to be the same size. Initially, the widgets will all be as tall as the tallest widget, and as wide as the widest. FillLayout does not wrap, and you cannot specify margins or spacing. You might use it to lay out buttons in a task bar or tool bar, or to stack checkboxes in a GroupFillLayout can also be used when a Composite only has one child. For example, if a Shell has a single Group child, FillLayout will cause the Group to completely fill the Shell.

Here is the relevant portion of the example code. First we create a FillLayout, then (if we want vertical) we set its type field toSWT.VERTICAL, and set it into the Composite (a Shell). The Shell has three push button children, "B1", "Wide Button 2", and "Button 3". Note that in a FillLayout, children are always the same size, and they fill all available space.

FillLayout fillLayout = new FillLayout();
fillLayout.type = SWT.VERTICAL;
shell.setLayout(fillLayout);
new Button(shell, SWT.PUSH).setText("B1");
new Button(shell, SWT.PUSH).setText("Wide Button 2");
new Button(shell, SWT.PUSH).setText("Button 3");

The following table shows the differences between a horizontal and vertical FillLayout, initially and after the parent has grown.

 

Initial

After resize

fillLayout.type = SWT.HORIZONTAL

(default)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)
fillLayout.type = SWT.VERTICAL Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

RowLayout

RowLayout is more commonly used than FillLayout because of its ability to wrap, and because it provides configurable margins and spacing. RowLayout has a number of configuration fields. In addition, the height and width of each widget in a RowLayout can be specified by setting the widget‘s RowData object using setLayoutData.

RowLayoutConfiguration Fields

The type field controls whether the RowLayout lays out widgets in horizontal rows, or vertical columns. RowLayouts are horizontal by default.

The wrap field controls whether or not the RowLayout will wrap widgets into the next row if there isn‘t enough space in the current row.RowLayouts wrap by default.

If the pack field is true, widgets in a RowLayout will take their natural size ("natural size" varies by widget; the natural size for a label or push button, for example, is large enough to display its textual contents), and they will be aligned as far to the left as possible. If pack is false, widgets will fill the available space, similar to the widgets in a FillLayoutRowLayouts pack by default.

If the justify field is true, widgets in a RowLayout are spread across the available space from left to right. If the parent Compositegrows wider, the extra space is distributed evenly among the widgets. If both pack and justify are true, widgets take their natural size, and the extra space is placed between the widgets in order to keep them fully justified. By default, RowLayouts do not justify.

The marginLeftmarginTopmarginRightmarginBottom and spacing fields control the number of pixels between widgets (spacing) and the number of pixels between a widget and the side of the parent Composite (margin). By default, RowLayouts leave 3 pixels for margins and spacing. The margin and spacing fields are shown in the following diagram.

Understanding Layouts in SWT(from eclipse.org)

RowLayout Examples

The following example code creates a RowLayout, sets all of its fields to non-default values, and then sets it into a Shell.

RowLayout rowLayout = new RowLayout();
rowLayout.wrap = false;
rowLayout.pack = false;
rowLayout.justify = true;
rowLayout.type = SWT.VERTICAL;
rowLayout.marginLeft = 5;
rowLayout.marginTop = 5;
rowLayout.marginRight = 5;
rowLayout.marginBottom = 5;
rowLayout.spacing = 0;
shell.setLayout(rowLayout);

If you are using the default field values, you only need one line of code:

shell.setLayout(new RowLayout());

The results of setting specific fields is shown below:

 

Initial

After resize

rowLayout.wrap = true;
rowLayout.pack = true;
rowLayout.justify = false;
rowLayout.type = SWT.HORIZONTAL;

(defaults)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

and

Understanding Layouts in SWT(from eclipse.org)
wrap = false

(clips if not enough space)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)
pack = false

(all widgets are the same size)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)
justify = true

(widgets are spread across the available space)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)
type = SWT.VERTICAL

(widgets are arranged vertically in columns)

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

Using RowData Objects with RowLayout

Each widget controlled by a RowLayout can have its initial width and height specified by setting its RowData object. The following code uses RowData objects to change the initial size of the Buttons in a Shell.

package org.eclipse.articles.layouts.samples;
import org.eclipse.swt.SWT;
import org.eclipse.swt.layout.RowData;
import org.eclipse.swt.layout.RowLayout;
import org.eclipse.swt.widgets.Button;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Shell;

public class RowDataExample {
	public static void main(String[] args) {
		Display display = new Display();
		Shell shell = new Shell(display);
		shell.setLayout(new RowLayout());
		Button button1 = new Button(shell, SWT.PUSH);
		button1.setText("Button 1");
		button1.setLayoutData(new RowData(50, 40));
		Button button2 = new Button(shell, SWT.PUSH);
		button2.setText("Button 2");
		button2.setLayoutData(new RowData(50, 30));
		Button button3 = new Button(shell, SWT.PUSH);
		button3.setText("Button 3");
		button3.setLayoutData(new RowData(50, 20));
		shell.pack();
		shell.open();
		while (!shell.isDisposed()) {
			if (!display.readAndDispatch())
				display.sleep();
		}
	}
}

Here is what you see when you run this code.

Understanding Layouts in SWT(from eclipse.org)

GridLayout

With a GridLayout, the widget children of a Composite are laid out in a grid. GridLayout has a number of configuration fields, and—likeRowLayout—the widgets it lays out can have an associated layout data object, called GridData. The power of GridLayout lies in the ability to configure GridData for each widget controlled by the GridLayout.

GridLayout Configuration Fields

The numColumns field is the most important field in a GridLayout, and it is usually the first field an application will set. Widgets are laid out in columns from left to right, and a new row is created when numColumns + 1 widgets are added to the Composite. The default is to have only 1 column. The following code creates a Shell with five Button children of various widths, managed by a GridLayout. The table below shows the grid when numColumns is set to one, two, or three.

Display display = new Display();
Shell shell = new Shell(display);
GridLayout gridLayout = new GridLayout();
gridLayout.numColumns = 3;
shell.setLayout(gridLayout);
new Button(shell, SWT.PUSH).setText("B1");
new Button(shell, SWT.PUSH).setText("Wide Button 2");
new Button(shell, SWT.PUSH).setText("Button 3");
new Button(shell, SWT.PUSH).setText("B4");
new Button(shell, SWT.PUSH).setText("Button 5");
shell.pack();
shell.open();

while (!shell.isDisposed()) {
	if (!display.readAndDispatch()) display.sleep();
}
numColumns = 1
numColumns = 2
numColumns = 3
Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

The makeColumnsEqualWidth field forces the columns to be the same width. The default is false. If we change the example above to have three columns of equal width, this is what we would get (note that in the absence of further instruction, widgets are left-justified in their columns).

Understanding Layouts in SWT(from eclipse.org)

The marginWidthmarginHeighthorizontalSpacing, and verticalSpacing fields in a GridLayout are similar to those in a RowLayout. The difference is that the left and right margins are grouped into marginWidth, and the top and bottom margins are grouped intomarginHeight. Also, in a GridLayout you can specify horizontalSpacing and verticalSpacing independently, whereas in a RowLayoutspacingapplies to horizontal or vertical depending on the type of the RowLayout.

GridData Object Fields

GridData is the layout data object associated with GridLayout. To set a widget‘s GridData object, you use the setLayoutData method. For example, to set the GridData for a Button, we could do the following:

Button button1 = new Button(shell, SWT.PUSH);
button1.setText("B1");
button1.setLayoutData(new GridData());

Of course, this code just creates a GridData object with all of its fields set to their default values, which is the same as not setting the layout data at all. There are two ways to create a GridData object with certain fields set. The first is to set the fields directly:

GridData gridData = new GridData();
gridData.horizontalAlignment = GridData.FILL;
gridData.grabExcessHorizontalSpace = true;
button1.setLayoutData(gridData);
Understanding Layouts in SWT(from eclipse.org)

One final note about GridData objects before we get into their fields: do not reuse GridData objects. Every widget in a Composite that is managed by a GridLayout must have a unique GridData object. If the layout data for a widget in a GridLayout is null at layout time, a unique GridData object is created for it.

The horizontalAlignment and verticalAlignment fields specify where to place a widget horizontally and/or vertically within its grid cell. Each alignment field can have one of the following values:

  • BEGINNING
  • CENTER
  • END
  • FILL

The default horizontalAlignment is BEGINNING (or left-aligned). The default verticalAlignment is CENTER.

Let‘s go back to our five-button example with three columns, and we will vary the horizontalAlignment of Button 5.

horizontalAlignment = GridData.BEGINNING

(default)

Understanding Layouts in SWT(from eclipse.org)
horizontalAlignment = GridData.CENTER
Understanding Layouts in SWT(from eclipse.org)
horizontalAlignment = GridData.END
Understanding Layouts in SWT(from eclipse.org)
horizontalAlignment = GridData.FILL
Understanding Layouts in SWT(from eclipse.org)

The horizontalIndent field allows you to move a widget to the right by a specified number of pixels. This field is typically only useful when the horizontalAlignment is BEGINNING. We cannot use a style bit to set the indent, so we will indent "Button 5" in our example by four pixels as follows:

GridData gridData = new GridData();
gridData.horizontalIndent = 4;
button5.setLayoutData(gridData);
Understanding Layouts in SWT(from eclipse.org)

The horizontalSpan and verticalSpan fields let widgets occupy more than one grid cell. They are often used in conjunction with FILLalignment. We can make "Button 5" in our example span the last two cells as follows:

GridData gridData = new GridData();
gridData.horizontalAlignment = GridData.FILL;
gridData.horizontalSpan = 2;
button5.setLayoutData(gridData);
Understanding Layouts in SWT(from eclipse.org)

If we decide to make "Wide Button 2" span two cells instead, we would end up with this:

GridData gridData = new GridData();
gridData.horizontalAlignment = GridData.FILL;
gridData.horizontalSpan = 2;
button2.setLayoutData(gridData);
Understanding Layouts in SWT(from eclipse.org)

Or we could make "Button 3" span two cells vertically:

GridData gridData = new GridData();
gridData.verticalAlignment = GridData.FILL;
gridData.verticalSpan = 2;
button3.setLayoutData(gridData);
Understanding Layouts in SWT(from eclipse.org)

The grabExcessHorizontalSpace and grabExcessVerticalSpace fields are typically used for larger widgets such as Text, List or Canvas to allow them to grow if their containing Composite grows. If a Text is grabbing excess horizontal space and the user resizes the Shellwider, then the Text will get all of the new horizontal space and other widgets in the same row will stay their original width. Of course, the widget that is grabbing excess space is also the first one to shrink when the Shell gets smaller. It is easiest to always think of the grabExcessSpace fields in the context of resizing. For a simple example, let‘s reuse the previous example where "Button 3" spanned two cells vertically. Here it is again:

Understanding Layouts in SWT(from eclipse.org)

If we resize this window, the only thing that happens is that the window gets bigger:

Understanding Layouts in SWT(from eclipse.org)

Now we will tell "Button 3" to grab excess horizontal and vertical space, and "B1" and "B4" to fill vertically (without grabbing), and we resize the window again:

Button button1 = new Button(shell, SWT.PUSH);
button1.setText("B1");
GridData gridData = new GridData();
gridData.verticalAlignment = GridData.FILL;
button1.setLayoutData(gridData);

new Button(shell, SWT.PUSH).setText("Wide Button 2");

Button button3 = new Button(shell, SWT.PUSH);
button3.setText("Button 3");
gridData = new GridData();
gridData.verticalAlignment = GridData.FILL;
gridData.verticalSpan = 2;
gridData.grabExcessVerticalSpace = true;
gridData.horizontalAlignment = GridData.FILL;
gridData.grabExcessHorizontalSpace = true;
button3.setLayoutData(gridData);

Button button4 = new Button(shell, SWT.PUSH);
button4.setText("B4");
gridData = new GridData();
gridData.verticalAlignment = GridData.FILL;
button4.setLayoutData(gridData);

new Button(shell, SWT.PUSH).setText("Button 5");
Understanding Layouts in SWT(from eclipse.org)

This time, "Button 3" grew in both directions, and "B4" grew vertically. The other buttons stayed their original sizes. Because "Button 3" was grabbing vertically and it spans two rows, the last row that it spans grew taller. Note that "B1" did not grow—although it is filling vertically—because its row did not grow. Since "Button 3" was grabbing horizontally, its column grew wider, and since it was filling horizontally, it grew wider to fill the column.

In a typical application window, you often want to have at least one widget that is grabbing. If more than one widget is trying to grab the same space, then the excess space is shared evenly among the grabbing widgets:

import org.eclipse.swt.SWT;
import org.eclipse.swt.layout.GridData;
import org.eclipse.swt.layout.GridLayout;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Label;
import org.eclipse.swt.widgets.List;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.widgets.Text;

public class SampleGrabExcess {
	public static void main(String[] args) {
		Display display = new Display();
		Shell shell = new Shell(display);
		shell.setLayout(new GridLayout(2, false));
		
		Label nameLabel = new Label(shell, SWT.NONE);
		nameLabel.setText("Name:");
		
		Text nameText = new Text(shell, SWT.BORDER);
		GridData gridData = new GridData();
		gridData.horizontalAlignment = SWT.FILL;
		gridData.grabExcessHorizontalSpace = true;
		nameText.setLayoutData(gridData);
		nameText.setText("Text grows horizontally");
		
		Label addressLabel = new Label(shell, SWT.NONE);
		addressLabel.setText("Address:");
		gridData = new GridData();
		gridData.verticalAlignment = SWT.TOP;
		addressLabel.setLayoutData(gridData);
		
		Text addressText = new Text(shell, SWT.BORDER | SWT.WRAP | SWT.MULTI);
		gridData = new GridData();
		gridData.horizontalAlignment = SWT.FILL;
		gridData.grabExcessHorizontalSpace = true;
		gridData.verticalAlignment = SWT.FILL;
		gridData.grabExcessVerticalSpace = true;
		addressText.setLayoutData(gridData);
		addressText.setText("This text field and the List\nbelow share any excess space.");

		Label sportsLabel = new Label(shell, SWT.NONE);
		sportsLabel.setText("Sports played:");
		gridData = new GridData();
		gridData.horizontalSpan = 2;
		sportsLabel.setLayoutData(gridData);
		
		List sportsList = new List(shell, SWT.BORDER | SWT.MULTI);
		gridData = new GridData();
		gridData.horizontalSpan = 2;
		gridData.horizontalAlignment = SWT.FILL;
		gridData.grabExcessHorizontalSpace = true;
		gridData.verticalAlignment = SWT.FILL;
		gridData.grabExcessVerticalSpace = true;
		sportsList.setLayoutData(gridData);
		sportsList.add("Hockey");
		sportsList.add("Street Hockey");
				
		shell.pack();
		shell.open();

		while (!shell.isDisposed()) {
			if (!display.readAndDispatch())
				display.sleep();
		}
	}
}

Understanding Layouts in SWT(from eclipse.org)

When resized, the single line (top-most) Text grows to consume all available horizontal space, and the second Text and the List grow to consume all remaining space (both vertically and horizontally):

Understanding Layouts in SWT(from eclipse.org)

One final point to note about grabbing: if a widget is set to grab excess horizontal space and its parent Composite grows wider, then the entire column containing that widget grows wider. If a widget is grabbing excess vertical space and its parent Composite grows taller, then the entire row containing that widget grows taller. The implication of this is that if any other widget in the affected column or row has fill alignment, then it will stretch also. Widgets that have beginning, center, or end alignment will not stretch: they will stay at the beginning, center or end of the wider column or taller row.

The widthHint and heightHint fields indicate the number of pixels wide or tall that you would like a widget to be, assuming that it does not conflict with other requirements in the GridLayout‘s constraint system. Looking back at the five-button, three-column example, say we want "Button 5" to be 70 pixels wide and 40 pixels tall. We code it as follows:

GridData gridData = new GridData();
gridData.widthHint = 70;
gridData.heightHint = 40;
button5.setLayoutData(gridData);

The natural size of "Button 5" is shown in the window on the left, below, and the 70-pixel wide, 40-pixel tall "Button 5" is on the right.

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

Note, however, that if the horizontalAlignment of "Button 5" was FILL, then the GridLayout would not have been able to honor the request for a width of 70 pixels.

One final comment about using width and height hints: something that looks good on one platform may not look good on another. The variation between font sizes and natural widget sizes across platforms means that hard-coding pixel values is not usually the best way to lay out windows. So, keep the use of size hints to a minimum, if you use them at all.

A Complex GridLayout Example

So far, the GridLayout examples have been fairly simple, in order to show how each field works. Now, we will put them all together to create a more complicated example. We start by hand-drawing a rough sketch of the window we want to create, to determine things like how many columns the grid should contain, and whether or not any widgets need to span.

Understanding Layouts in SWT(from eclipse.org)

Then we start coding the example from the diagram. The code is below. Note that we have added a bit of logic to make the code more interesting, for example, "Browse..." opens a FileDialog to read an Image file which the Canvas displays in a paint listener, "Delete" deletes the Image, and Enter prints the current dog and owner info.

package org.eclipse.articles.layouts.samples;
import org.eclipse.swt.SWT;
import org.eclipse.swt.events.DisposeEvent;
import org.eclipse.swt.events.DisposeListener;
import org.eclipse.swt.events.PaintEvent;
import org.eclipse.swt.events.PaintListener;
import org.eclipse.swt.events.SelectionAdapter;
import org.eclipse.swt.events.SelectionEvent;
import org.eclipse.swt.graphics.Image;
import org.eclipse.swt.graphics.Rectangle;
import org.eclipse.swt.layout.GridData;
import org.eclipse.swt.layout.GridLayout;
import org.eclipse.swt.widgets.Button;
import org.eclipse.swt.widgets.Canvas;
import org.eclipse.swt.widgets.Combo;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.FileDialog;
import org.eclipse.swt.widgets.Group;
import org.eclipse.swt.widgets.Label;
import org.eclipse.swt.widgets.List;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.widgets.Text;

public class DogShowRegistrationWindow {
	Text dogName;
	Combo dogBreed;
	Canvas dogPhoto;
	Image dogImage;
	List categories;
	Text ownerName;
	Text ownerPhone;

	public static void main(String[] args) {
		Display display = new Display();
		Shell shell = new DogShowRegistrationWindow().createShell(display);
		shell.open();
		while (!shell.isDisposed()) {
			if (!display.readAndDispatch())
				display.sleep();
		}
	}
	
	public Shell createShell(final Display display) {
		final Shell shell = new Shell(display);
		shell.setText("Dog Show Entry");
		GridLayout gridLayout = new GridLayout();
		gridLayout.numColumns = 3;
		shell.setLayout(gridLayout);
		
		new Label(shell, SWT.NONE).setText("Dog‘s Name:");
		
		dogName = new Text(shell, SWT.SINGLE | SWT.BORDER);
		GridData gridData = new GridData(GridData.FILL, GridData.CENTER, true, false);
		gridData.horizontalSpan = 2;
		dogName.setLayoutData(gridData);
		
		new Label(shell, SWT.NONE).setText("Breed:");
		
		dogBreed = new Combo(shell, SWT.NONE);
		dogBreed.setItems(new String[] { "Collie", "Pitbull", "Poodle",
				"Scottie", "Black Lab" });
		dogBreed.setLayoutData(new GridData(GridData.FILL, GridData.CENTER, true, false));
		
		Label label = new Label(shell, SWT.NONE);
		label.setText("Categories");
		label.setLayoutData(new GridData(GridData.CENTER, GridData.CENTER, true, false));
		
		new Label(shell, SWT.NONE).setText("Photo:");
		dogPhoto = new Canvas(shell, SWT.BORDER);
		gridData = new GridData(GridData.FILL, GridData.FILL, true, true);
		gridData.widthHint = 80;
		gridData.heightHint = 80;
		gridData.verticalSpan = 3;
		dogPhoto.setLayoutData(gridData);
		dogPhoto.addPaintListener(new PaintListener() {
			public void paintControl(final PaintEvent event) {
				if (dogImage != null) {
					event.gc.drawImage(dogImage, 0, 0);
				}
			}
		});
		
		categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL);
		categories.setItems(new String[] { "Best of Breed", "Prettiest Female",
				"Handsomest Male", "Best Dressed", "Fluffiest Ears",
				"Most Colors", "Best Performer", "Loudest Bark",
				"Best Behaved", "Prettiest Eyes", "Most Hair", "Longest Tail",
				"Cutest Trick" });
		gridData = new GridData(GridData.FILL, GridData.FILL, true, true);
		gridData.verticalSpan = 4;
		int listHeight = categories.getItemHeight() * 12;
		Rectangle trim = categories.computeTrim(0, 0, 0, listHeight);
		gridData.heightHint = trim.height;
		categories.setLayoutData(gridData);
		
		Button browse = new Button(shell, SWT.PUSH);
		browse.setText("Browse...");
		gridData = new GridData(GridData.FILL, GridData.CENTER, true, false);
		gridData.horizontalIndent = 5;
		browse.setLayoutData(gridData);
		browse.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				String fileName = new FileDialog(shell).open();
				if (fileName != null) {
					dogImage = new Image(display, fileName);
				}
			}
		});
		
		Button delete = new Button(shell, SWT.PUSH);
		delete.setText("Delete");
		gridData = new GridData(GridData.FILL, GridData.BEGINNING, true, false);
		gridData.horizontalIndent = 5;
		delete.setLayoutData(gridData);
		delete.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				if (dogImage != null) {
					dogImage.dispose();
					dogImage = null;
					dogPhoto.redraw();
				}
			}
		});
		
		Group ownerInfo = new Group(shell, SWT.NONE);
		ownerInfo.setText("Owner Info");
		gridLayout = new GridLayout();
		gridLayout.numColumns = 2;
		ownerInfo.setLayout(gridLayout);
		gridData = new GridData(GridData.FILL, GridData.CENTER, true, false);
		gridData.horizontalSpan = 2;
		ownerInfo.setLayoutData(gridData);
		
		new Label(ownerInfo, SWT.NONE).setText("Name:");
		ownerName = new Text(ownerInfo, SWT.SINGLE | SWT.BORDER);
		ownerName.setLayoutData(new GridData(GridData.FILL, GridData.CENTER, true, false));
		
		new Label(ownerInfo, SWT.NONE).setText("Phone:");
		ownerPhone = new Text(ownerInfo, SWT.SINGLE | SWT.BORDER);
		ownerPhone.setLayoutData(new GridData(GridData.FILL, GridData.CENTER, true, false));
		
		Button enter = new Button(shell, SWT.PUSH);
		enter.setText("Enter");
		gridData = new GridData(GridData.END, GridData.CENTER, false, false);
		gridData.horizontalSpan = 3;
		enter.setLayoutData(gridData);
		enter.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				System.out.println("\nDog Name: " + dogName.getText());
				System.out.println("Dog Breed: " + dogBreed.getText());
				System.out.println("Owner Name: " + ownerName.getText());
				System.out.println("Owner Phone: " + ownerPhone.getText());
				System.out.println("Categories:");
				String cats[] = categories.getSelection();
				for (int i = 0; i > cats.length; i++) {
					System.out.println("\t" + cats[i]);
				}
			}
		});
		
		shell.addDisposeListener(new DisposeListener() {
			public void widgetDisposed(DisposeEvent arg0) {
				if (dogImage != null) {
					dogImage.dispose();
					dogImage = null;
				}
			}			
		});
		
		shell.pack();
		
		return shell;
	}
}

Here is what the window looks like after Mary Smith enters Bifford in the dog show:

Understanding Layouts in SWT(from eclipse.org)

If this window is resized larger, the layout adjusts as follows:

Understanding Layouts in SWT(from eclipse.org)

Notice the following:

  • There are three columns and seven rows.
  • The dogPhoto Canvas grew wider and taller because it is filling and grabbing horizontally and vertically (we did not resize the Image, but we could have).
  • The dogBreed Combo grew wider because it is filling horizontally, and it is in the same column as the Canvas.
  • The dogName Text grew wider because it is filling horizontally, and one of the columns it spans is the column containing the Canvas.
  • The categories List grew taller because it is filling vertically, and it spans the same rows that the Canvas does.
  • Because the categories List grew taller, its vertical scrollbar disappeared (it did not grow wider).
  • The ownerInfo Group grew wider because it is filling horizontally, and one of the columns it spans is the column containing the Canvas.
  • The ownerInfo Group, as a subclass of Composite, has its own GridLayout with 2 columns and 2 rows.
  • The ownerName and ownerPhone Texts grew wider because the Group grew wider, and they are filling and grabbing horizontally in the Group‘s GridLayout.
  • The browse and delete Buttons are indented slightly, and because they both fill horizontally, they are the same width.
  • The delete Button is vertically aligned at the top of its row.
  • The "Categories" Label is centered over the categories List.
  • The enter Button is horizontally aligned to the right of the 3 columns it spans.
  • The dogPhoto Canvas was created with width and height hints because we want the Image to be 80 pixels x 80 pixels, if possible.
  • The categories List was created with a height hint that was based on the List‘s font times 12, because we want try to get the List to show 12 items initially.

FormLayout

FormLayout works by creating FormAttachments for each side of the widget, and storing them in the layout data. An attachment ‘attaches‘ a specific side of the widget either to a position in the parent Composite or to another widget within the layout. This provides tremendous flexibility when laying out, as it allows you to specify the placement of individual widgets within the layout.

FormLayout Configuration Fields

The marginWidth, and MarginHeight fields in FormLayout are similar to those in GridLayout. Left and right margins are defined bymarginWidth, and top and bottom margins are defined by marginHeight. Margins can also be defined on a per-widget basis in the attachments. FormLayout margins are zero by default.

To set the margins, we create a FormLayout, and set the margin fields. The following code will set a margin of five pixels around all four sides of the parent Composite:

Display display = new Display ();
Shell shell = new Shell (display);
FormLayout layout= new FormLayout ();
layout.marginHeight = 5;
layout.marginWidth = 5;
shell.setLayout(layout);

FormData Object Fields

FormData objects specify how each widget in a FormLayout will be laid out. Each FormData object defines the attachments for all four sides of the widget. These attachments tell where to position each side of the widget. To set a widget‘s FormData object, you use thesetLayoutData(Object) method, for example:

Button button1 = new Button(shell, SWT.PUSH);
button1.setText("B1");
button1.setLayoutData(new FormData());

This code creates a FormData object with no attachments. In this case, default attachments are defined, which defeats the whole purpose and utility of FormLayout. The default attachments attach the widget to the top and left edges of the parent Composite. If every widget in a FormLayout used the default attachments, they would all be laid out one on top of another in the top left corner of the parentComposite.

The leftrighttop, and bottom fields of FormData specify the FormAttachment objects that are associated with the left, right, top and bottom sides of the widget, respectively. These fields are set in the following example:

FormData formData = new FormData();
formData.top = new FormAttachment(0,60);
formData.bottom = new FormAttachment(100,-5);
formData.left = new FormAttachment(20,0);
formData.right = new FormAttachment(100,-3);
button1.setLayoutData(formData);
Understanding Layouts in SWT(from eclipse.org)

FormAttachment object defines the attachment of a specific side of a widget. There are many ways that a side can be attached: to a position in the parent Composite, to an edge of the Composite, to the adjacent side of another widget, to the opposite side of another widget, or centered on another widget. Attaching to a position places the side of the widget so that it is always at a percentage of theComposite. To attach to an edge of the Composite, the percentage is either 0% or 100%. Attaching to the adjacent side of another widget ensures that the specified side of the widget is always next to the closest side of the other widget. Attaching to the opposite side of another widget ensures that the specific side of the widget is aligned with the furthest side of the other widget. Finally, attaching to the center of another widget centers the widget on the other widget. Any of these ways can be done with or without an offset.

The width and height fields of FormData specify the requested width and the height of the widget. If a requested width or height conflicts with constraints set by the attachments, then that width or height will not be honored. Although setting attachments can also determine width and height, there are some cases when you do not want to define attachments for all sides of the widget. In this case, it may be useful to set the width and height of the widget as follows:

FormData formData = new FormData(20,30);
formData.top = new FormAttachment(0,60);
formData.left = new FormAttachment(20,0);
button1.setLayoutData(formData);

If you wish to set only the width or the height, you can directly set the width or height field in the FormData object:

FormData formData = new FormData();
formData.width = 30;
formData.top = new FormAttachment(0,60);
formData.bottom = new FormAttachment(100,-5);
formData.left = new FormAttachment(20,0);
button1.setLayoutData(formData);

Note that if a button is attached to the parent Composite on both sides, when the Composite is resized, the button will grow or shrink along with it.

FormAttachment Objects

FormAttachment is an object that defines the attachment for a specific side of a widget. It is not always necessary to set an attachment for all four sides of a widget. Often, specifying one or more sides of a widget can fully specify its placement in the layout. In order to properly place your widgets, you should define an attachment for at least one of left or right in the FormData, and at least one of top or bottom. If you only wish to attach the left side of a widget and not the right, then the widget will be positioned based on its left side, and the widget will take its natural size (or its requested size, if one was set for it). If you do not attach the left or the right, default positioning will attach your widget to the left side of the form. The same logic applies for the top and bottom sides.

Attaching to a Position

There are many types of attachment. The first is to attach the widget to a position in the parent Composite. This can be done by defining a percentage value out of 100, for example:

FormData formData = new FormData();
formData.top = new FormAttachment(50,0);
button1.setLayoutData(formData);
Understanding Layouts in SWT(from eclipse.org)

This sets the top of the Button to a position that represents 50% of the height of the parent Composite (a Shell), with an offset of 0. When the shell is resized, the top side of the Button will still be at 50%, like so:

Understanding Layouts in SWT(from eclipse.org)

If we chose to set an offset value, the top side of the Button would have been set to 50% of the Composite plus or minus the number of pixels set for the offset.

We can also define the position of the button using an arbitrary scale, for example:

FormData formData = new FormData();
formData.top = new FormAttachment(30,70,10);
button1.setLayoutData(formData);

If the height of the Composite is defined as being 70 units, this sets the top of the Button to a position representing 30 units down from the top of the Composite, plus 10 pixels (i.e. 3/7ths of the height of the composite plus 10 pixels).

To attach a side of a widget to an edge of the parent Composite, set the position to either 0% or 100%. The 0 position is defined as the top of the Composite when going vertically, and the left when going horizontally. The right and bottom edges of the Composite are defined as the 100 position. Therefore, if we want to attach a widget to the right edge of the Composite, we simply have to create an attachment that sets the position to 100:

FormData formData = new FormData();
formData.right = new FormAttachment(100,-5);
button1.setLayoutData(formData);
Understanding Layouts in SWT(from eclipse.org)

This attaches the right side of the Button to the right edge of the parent (a Shell), with an offset of five pixels. Note that the offsets go in one direction only. If you want a widget offset down or to the right, the offset should be positive. For offsets that shift the widget up or to the left, the offset should be negative. When the Shell is resized, the Button will always be five pixels away from the right edge:

Understanding Layouts in SWT(from eclipse.org)

Attaching to Another Widget

The third type of attachment is to attach the side of the widget to another control within the parent Composite. The side can be attached to the adjacent side of the other control (the default), to the opposite side of the other control, or the widget can be centered on the other control, all with or without and offset.

The most common way to attach to another control is to attach to its adjacent side. For example, the following code:

FormData formData = new FormData();
formData.top = new FormAttachment(20,0);
button1.setLayoutData(formData);

FormData formData2 = new FormData();
formData2.top = new FormAttachment(button1,10);
button2.setLayoutData(formData2);
Understanding Layouts in SWT(from eclipse.org)

This example attaches the top of button2 to the bottom of button1. Note that when the window is resized, button1 will move so that its top side is always positioned at 20% of the Shell, and button2 will move so that its top side is always 10 pixels below the adjacent (bottom) side of button1.

Understanding Layouts in SWT(from eclipse.org)

While the default is to attach the side of a widget to the adjacent side of a control, FormAttachments can also be created to attach to the opposite side of a control. This is useful when lining up widgets. In this case, you create the attachment to the other control using TOPBOTTOMLEFT or RIGHT alignment, for example:

formData2.top = new FormAttachment(button1,0,SWT.TOP);

In the following example, the top side of button1 is positioned at 20% of the Shellbutton2‘s top side is aligned with button1‘s top side, using TOP alignment. This means that the top side of button2 is also positioned at 20% of the Shell. Note that when specifying the top attachment, only the vertical placement of the widget is being defined. It is still necessary to set the left attachment for button2so that the Buttons are not stacked on top of each other.

FormData formData = new FormData(50,50);
formData.top = new FormAttachment(20,0);
button1.setLayoutData(formData);

FormData formData2 = new FormData();
formData2.left = new FormAttachment(button1,5);
formData2.top = new FormAttachment(button1,0,SWT.TOP); 
button2.setLayoutData(formData2);
Understanding Layouts in SWT(from eclipse.org)

The final way to attach a widget to another control is to center it on the other control. This is useful when the widgets are different sizes. In this case, you create the attachment to the other control with CENTER alignment, for example:

formData.top = new FormAttachment(button1,0,SWT.CENTER);

This will place the top of the widget in a position that will allow the widget to be centered on the other control, with an offset of 0. Setting only the top, or the bottom, or both as a center attachment will produce the same result. The top side of the widget is not centered, but the entire widget is centered, so this only needs to be specified once. Here is an example:

FormData formData1 = new FormData (50,50);
button1.setLayoutData(formData1);

FormData formData2 = new FormData ();
formData2.left = new FormAttachment (button1,5);
formData2.top = new FormAttachment (button1,0,SWT.CENTER);
button2.setLayoutData(formData2);
Understanding Layouts in SWT(from eclipse.org)

Using the different types of FormAttachment allows layouts to be defined in many different ways. FormLayout covers certain cases that cannot be solved using FillLayoutRowLayout or GridLayout, making it a very useful class for defining layouts.

Important: Do not define circular attachments. For example, do not attach the right edge of button1 to the left edge of button2 and then attach the left edge button2 to the right edge of button1. This will over-constrain the layout, causing undefined behavior. The algorithm will terminate, but the results are undefined. Therefore, make sure that you do not over-constrain your widgets. Only provide the attachments necessary to properly lay out the widgets.

A FormLayout Example

So far, all the examples using FormLayout have involved one or two Buttons, to show how FormAttachments work. Next, we will do a simple example using more Buttons to show how a layout can be arranged using the attachments. We‘ll start by drawing a basic diagram outlining the attachments that we wish to create.

Understanding Layouts in SWT(from eclipse.org)

FormData data1 = new FormData();
data1.left = new FormAttachment(0,5);
data1.right = new FormAttachment(25,0);
button1.setLayoutData(data1);

FormData data2 = new FormData();
data2.left = new FormAttachment(button1,5);
data2.right = new FormAttachment(100,-5);
button2.setLayoutData(data2);

FormData data3 = new FormData(60,60);
data3.top = new FormAttachment(button1,5);
data3.left = new FormAttachment(50,-30);
data3.right = new FormAttachment(50,30);
button3.setLayoutData(data3);

FormData data4 = new FormData();
data4.top = new FormAttachment(button3,5);
data4.bottom = new FormAttachment(100,-5);
data4.left = new FormAttachment(25,0);
button4.setLayoutData(data4);

FormData data5 = new FormData();
data5.bottom = new FormAttachment(100,-5);
data5.left = new FormAttachment(button4,5);
button5.setLayoutData(data5);

In this case, since no top attachment was defined for button1 or button2, they are attached to the top of the layout. button3 is centred in the layout using percentages and offsets on the left and right sides. button4 and button5 are attached to the bottom of the layout with a five pixel offset.

Understanding Layouts in SWT(from eclipse.org)

When we resize, the attachments become more visible. button1 is attached on the left and the right side, so when the window is resized, it grows. Note that the right side will always be at 25% of the window. The same resize results apply for button2, as both sides are attached. The left side is attached to button1, so it will always be at 25% plus five pixels. button3 stays in the center of the window, horizontally. button4 is attached at the top and the bottom, so it grows vertically when the window is resized, but it is only attached on the left and not the right, so it does not grow horizontally. button5 will not grow or shrink, but it will always stay five pixels away from button4 on the left, and five pixels away from the bottom of the window.

Understanding Layouts in SWT(from eclipse.org)

A Complex FormLayout Example

To illustrate how FormLayout can be used for more complicated arrangements, the Dog Show Entry example done previously for GridLayout is redone using FormLayout. This code produces an identical layout, but uses different concepts to achieve it.

import org.eclipse.swt.SWT;
import org.eclipse.swt.events.PaintEvent;
import org.eclipse.swt.events.PaintListener;
import org.eclipse.swt.events.SelectionAdapter;
import org.eclipse.swt.events.SelectionEvent;
import org.eclipse.swt.graphics.Image;
import org.eclipse.swt.layout.FormAttachment;
import org.eclipse.swt.layout.FormData;
import org.eclipse.swt.layout.FormLayout;
import org.eclipse.swt.widgets.Button;
import org.eclipse.swt.widgets.Canvas;
import org.eclipse.swt.widgets.Combo;
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.FileDialog;
import org.eclipse.swt.widgets.Group;
import org.eclipse.swt.widgets.Label;
import org.eclipse.swt.widgets.List;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swt.widgets.Text;

public class DogShowRegistrationWindowWithFormLayout {
	Image dogImage;
	Text dogNameText;
	Combo dogBreedCombo;
	Canvas dogPhoto;
	List categories;
	Text nameText;
	Text phoneText;

	public static void main(String[] args) {
		Display display = new Display();
		Shell shell = new DogShowRegistrationWindow().createShell(display);
		shell.open();
		while (!shell.isDisposed()) {
			if (!display.readAndDispatch())
				display.sleep();
		}
	}
	
	public Shell createShell(final Display display) {
		final Shell shell = new Shell(display);
		FormLayout layout = new FormLayout();
		layout.marginWidth = 5;
		layout.marginHeight = 5;
		shell.setLayout(layout);
		shell.setText("Dog Show Entry");
		
		Group ownerInfo = new Group(shell, SWT.NONE);
		ownerInfo.setText("Owner Info");
		FormLayout ownerLayout = new FormLayout();
		ownerLayout.marginWidth = 5;
		ownerLayout.marginHeight = 5;
		ownerInfo.setLayout(ownerLayout);
		
		Label dogName = new Label(shell, SWT.NONE);
		dogName.setText("Dog‘s Name:");
		dogNameText = new Text(shell, SWT.SINGLE | SWT.BORDER);
		
		Label dogBreed = new Label(shell, SWT.NONE);
		dogBreed.setText("Breed:");
		
		dogBreedCombo = new Combo(shell, SWT.NONE);
		dogBreedCombo.setItems(new String[] { "Collie", "Pitbull", "Poodle",
				"Scottie", "Black Lab" });
		
		Label photo = new Label(shell, SWT.NONE);
		photo.setText("Photo:");
		dogPhoto = new Canvas(shell, SWT.BORDER);
		
		Button browse = new Button(shell, SWT.PUSH);
		browse.setText("Browse...");
		
		Button delete = new Button(shell, SWT.PUSH);
		delete.setText("Delete");
		
		Label cats = new Label(shell, SWT.NONE);
		cats.setText("Categories");
		categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL
				| SWT.H_SCROLL);
		categories.setItems(new String[] { "Best of Breed", "Prettiest Female",
				"Handsomest Male", "Best Dressed", "Fluffiest Ears",
				"Most Colors", "Best Performer", "Loudest Bark",
				"Best Behaved", "Prettiest Eyes", "Most Hair", "Longest Tail",
				"Cutest Trick" });
		
		Button enter = new Button(shell, SWT.PUSH);
		enter.setText("Enter");
		FormData data = new FormData();
		data.top = new FormAttachment(dogNameText, 0, SWT.CENTER);
		dogName.setLayoutData(data);
		data = new FormData();
		data.left = new FormAttachment(dogName, 5);
		data.right = new FormAttachment(100, 0);
		dogNameText.setLayoutData(data);
		
		data = new FormData();
		data.top = new FormAttachment(dogBreedCombo, 0, SWT.CENTER);
		dogBreed.setLayoutData(data);
		data = new FormData();
		data.top = new FormAttachment(dogNameText, 5);
		data.left = new FormAttachment(dogNameText, 0, SWT.LEFT);
		data.right = new FormAttachment(categories, -5);
		dogBreedCombo.setLayoutData(data);
		
		data = new FormData(80, 80);
		data.top = new FormAttachment(dogBreedCombo, 5);
		data.left = new FormAttachment(dogNameText, 0, SWT.LEFT);
		data.right = new FormAttachment(categories, -5);
		data.bottom = new FormAttachment(ownerInfo, -5);
		dogPhoto.setLayoutData(data);
		dogPhoto.addPaintListener(new PaintListener() {
			public void paintControl(final PaintEvent event) {
				if (dogImage != null) {
					event.gc.drawImage(dogImage, 0, 0);
				}
			}
		});
		data = new FormData();
		data.top = new FormAttachment(dogPhoto, 0, SWT.TOP);
		photo.setLayoutData(data);
		data = new FormData();
		data.top = new FormAttachment(photo, 5);
		data.right = new FormAttachment(dogPhoto, -5);
		browse.setLayoutData(data);
		browse.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				String fileName = new FileDialog(shell).open();
				if (fileName != null) {
					dogImage = new Image(display, fileName);
				}
			}
		});
		
		data = new FormData();
		data.left = new FormAttachment(browse, 0, SWT.LEFT);
		data.top = new FormAttachment(browse, 5);
		data.right = new FormAttachment(dogPhoto, -5);
		delete.setLayoutData(data);
		delete.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				if (dogImage != null) {
					dogImage.dispose();
					dogImage = null;
					dogPhoto.redraw();
				}
			}
		});
		
		data = new FormData(90, 140);
		data.top = new FormAttachment(dogPhoto, 0, SWT.TOP);
		data.right = new FormAttachment(100, 0);
		data.bottom = new FormAttachment(enter, -5);
		categories.setLayoutData(data);
		
		data = new FormData();
		data.bottom = new FormAttachment(categories, -5);
		data.left = new FormAttachment(categories, 0, SWT.CENTER);
		cats.setLayoutData(data);
		
		data = new FormData();
		data.right = new FormAttachment(100, 0);
		data.bottom = new FormAttachment(100, 0);
		enter.setLayoutData(data);
		enter.addSelectionListener(new SelectionAdapter() {
			public void widgetSelected(SelectionEvent event) {
				System.out.println("\nDog Name: " + dogNameText.getText());
				System.out.println("Dog Breed: " + dogBreedCombo.getText());
				System.out.println("Owner Name: " + nameText.getText());
				System.out.println("Owner Phone: " + phoneText.getText());
				System.out.println("Categories:");
				String cats[] = categories.getSelection();
				for (int i = 0; i < cats.length; i++) {
					System.out.println("\t" + cats[i]);
				}
			}
		});
		
		data = new FormData();
		data.bottom = new FormAttachment(enter, -5);
		data.left = new FormAttachment(0, 0);
		data.right = new FormAttachment(categories, -5);
		ownerInfo.setLayoutData(data);
		
		Label name = new Label(ownerInfo, SWT.NULL);
		name.setText("Name:");
		
		Label phone = new Label(ownerInfo, SWT.PUSH);
		phone.setText("Phone:");
		
		nameText = new Text(ownerInfo, SWT.SINGLE | SWT.BORDER);
		phoneText = new Text(ownerInfo, SWT.SINGLE | SWT.BORDER);
		
		data = new FormData();
		data.top = new FormAttachment(nameText, 0, SWT.CENTER);
		name.setLayoutData(data);
		
		data = new FormData();
		data.top = new FormAttachment(phoneText, 0, SWT.CENTER);
		phone.setLayoutData(data);
		
		data = new FormData();
		data.left = new FormAttachment(phone, 5);
		data.right = new FormAttachment(100, 0);
		nameText.setLayoutData(data);
		
		data = new FormData();
		data.left = new FormAttachment(nameText, 0, SWT.LEFT);
		data.right = new FormAttachment(100, 0);
		data.top = new FormAttachment(55, 0);
		phoneText.setLayoutData(data);
		
		shell.pack();
		
		return shell;
	}	
}

This is what the layout looks like after Mary Smith enters Bifford in the dog show:

Understanding Layouts in SWT(from eclipse.org)

When the window is resized, the same controls are resized as in the GridLayout example.

Understanding Layouts in SWT(from eclipse.org)

Writing Your Own Layout Class

Occasionally, you may want to write your own Layout class. Perhaps your layout needs are very complex. Maybe you have the same look in many places, and you want to take advantage of code reuse. Or you want to leverage domain knowledge to create a very efficient layout class. Whatever the reason, there are things to consider before writing a new class:

  • Can the layout be done using a GridLayout or FormLayout, with maybe a few nested layouts?
  • Can the desired effect be more easily achieved with a resize listener?
  • Are you defining a general layout algorithm or just positioning widgets?

Unless you are writing a very generic Layout type that will be used by several Composite widgets, it is often better and easier to simply calculate sizes and position children in a resize listener. Many of the SWT custom widgets were written this way. Although a new widget can be implemented as a Composite/Layout pair, implementing it as a Composite that does its layout in a resize listener and computes its preferred size in computeSize is clearer, and does not involve writing an extra class.

First, we will look at how layouts work, and then we will create a new Layout class. Another example of writing your own Layout can be found in the Compound Widget Example section of Creating Your Own Widgets Using SWT, which shows how to achieve the same look using either a resize listener or a new Layout class.

How Layouts Work

Layout is the abstract superclass of all layouts. It only has two methods: computeSize and layout. The class is defined as follows:

public abstract class Layout {
    protected abstract Point computeSize(Composite composite, int widthHint, int heightHint, boolean flushCache);
    protected abstract void layout(Composite composite, boolean flushCache);
}

The computeSize method calculates the width and height of a rectangle that encloses all of the Composite‘s children once they have been sized and placed according to the layout algorithm encoded in the Layout class. The hint parameters allow the width and/or height to be constrained. For example, a layout may choose to grow in one dimension if constrained in another. A hint of SWT.DEFAULT means to use the preferred size.

The layout method positions and sizes the Composite‘s children. A Layout can choose to cache layout-related information, such as the preferred extent of each of the children. The flushCache parameter tells the Layout to flush cached data.

Since a Layout controls the size and placement of widgets in a Composite, there are several methods in Composite that are used withLayouts.

The first two methods allow setting and getting a Layout object in a Composite.

public void setLayout(Layout layout);
public Layout getLayout();

An application can force a Layout to recalculate the sizes of and reposition children by sending layout() to the parent Composite.

public void layout(boolean changed);
public void layout();
    // calls layout(true);

You would do this after changing anything about the children that might affect their size or position, such as changing the font of a child, changing the text or image of a child, adding a new child, or adding children to a child (If the child can accommodate the change, then layout may not be necessary; for example, changing the font or text of a scrollable multi-line Text). Since these changes are done programmatically, they do not cause events to happen. Consequently, the parent doesn‘t know about the changes, and has to be told through the layout method. This strategy reduces flash because the application can make several changes and then tell the parent to layout, and the children are only redrawn once instead of once per change. If layout() is not called and changes are made after the shell is opened, then the children may not be correctly laid out until the shell is somehow resized. Note that shell.open() causes a layout to occur.

The computeSize methods of a Composite calculate the Composite‘s preferred size, which is the size of its client area as determined by the Layout, plus its trim.

public Point computeSize(int widthHint, int heightHint, boolean changed);
public Point computeSize(int widthHint, int heightHint);
    // calls computeSize(widthHint, heightHint, true);

The clientArea of a Composite is the rectangle that will contain all of the children. A Layout positions the children inside the client area.

public Rectangle getClientArea ();

The trim of a Composite is the area outside the client area. For some composites, the size of the trim is zero. The trim can be computed by passing the dimensions of the client area into the method computeTrim.

public Rectangle computeTrim (int x, int y, int width, int height);

Sending pack to a Composite resizes it to its preferred size.

public void pack(boolean changed);
    // calls setSize(computeSize(SWT.DEFAULT, SWT.DEFAULT, changed));
public void pack();
    // calls pack(true);

The boolean parameter to the layoutcomputeSize, and pack methods is the changed flag. If true, it indicates that the Composite‘s contents have changed in some way that affects its preferred size, therefore any caches that the Layout may have been keeping need to be flushed. When a Composite is resized, it asks its Layout to lay out its children by calling layout(false); therefore widget content caches are not flushed. This lets the Layout perform any expensive calculations only when necessary.

Caching can increase performance, but it can also be tricky. You can choose not to cache at all: in fact, it is best not to try caching until your code is stable. When considering what to cache, be certain not to store any widget state, such as the text of a label, or the number of items in a list.

Custom Layout Example

If you have several vertically oriented Composite widgets in your application, you might choose to write ColumnLayout. We will show a simple version of a Layout class that lays out Composite children into a single column. The class has fixed margins and spacing. Children are given the same width, but they take their natural height. (Note that RowLayout will have ColumnLayout behaviour if its type is set to SWT.VERTICAL. This example is, therefore, just an example. In practice, if you need to lay widgets out in a column, you would use RowLayout.)

The code for the ColumnLayout class is below. Note that we cache the width of the widest child, and the sum of the child heights (plus spacing), and these values are used to compute the size and lie out the children. They are recalculated if flushCache is true.

import org.eclipse.swt.*;
import org.eclipse.swt.graphics.*;
import org.eclipse.swt.widgets.*;
import org.eclipse.swt.layout.*;

public class ColumnLayout extends Layout {
    // fixed margin and spacing
    public static final int MARGIN = 4;
    public static final int SPACING = 2;
    // cache
    Point[] sizes;
    int maxWidth, totalHeight;

    protected Point computeSize(Composite composite, int wHint, int hHint,
            boolean flushCache) {
        Control children[] = composite.getChildren();
        if (flushCache || sizes == null || sizes.length != children.length) {
            initialize(children);
        }
        int width = wHint, height = hHint;
        if (wHint == SWT.DEFAULT)
            width = maxWidth;
        if (hHint == SWT.DEFAULT)
            height = totalHeight;
        return new Point(width + 2 * MARGIN, height + 2 * MARGIN);
    }

    protected void layout(Composite composite, boolean flushCache) {
        Control children[] = composite.getChildren();
        if (flushCache || sizes == null || sizes.length != children.length) {
            initialize(children);
        }
        Rectangle rect = composite.getClientArea();
        int x = MARGIN, y = MARGIN;
        int width = Math.max(rect.width - 2 * MARGIN, maxWidth);
        for (int i = 0; i < children.length; i++) {
            int height = sizes[i].y;
            children[i].setBounds(x, y, width, height);
            y += height + SPACING;
        }
    }

    void initialize(Control children[]) {
        maxWidth = 0;
        totalHeight = 0;
        sizes = new Point[children.length];
        for (int i = 0; i < children.length; i++) {
            sizes[i] = children[i].computeSize(SWT.DEFAULT, SWT.DEFAULT, true);
            maxWidth = Math.max(maxWidth, sizes[i].x);
            totalHeight += sizes[i].y;
        }
        totalHeight += (children.length - 1) * SPACING;
    }
}

Here is some simple test code to test the ColumnLayout. The grow and shrink Buttons show a call to the Shell‘s layout() method to force a re-layout after changing the width of one of the children. Calling layout() is the same as calling layout(true) which tells theColumnLayout to flush its caches before setting the bounds of the children. The Shell is also told to pack() after laying out the children. This forces the Shell to take the new size.

import org.eclipse.swt.*;
import org.eclipse.swt.widgets.*;
import org.eclipse.swt.layout.*;
import org.eclipse.swt.events.*;

public class ColumnLayoutTest {
    static Shell shell;
    static Button button3;

    public static void main(String[] args) {
        Display display = new Display();
        shell = new Shell(display);
        shell.setLayout(new ColumnLayout());
        new Button(shell, SWT.PUSH).setText("B1");
        new Button(shell, SWT.PUSH).setText("Very Wide Button 2");
        (button3 = new Button(shell, SWT.PUSH)).setText("Button 3");
        Button grow = new Button(shell, SWT.PUSH);
        grow.setText("Grow Button 3");
        grow.addSelectionListener(new SelectionAdapter() {
            public void widgetSelected(SelectionEvent e) {
                button3.setText("Extreemely Wide Button 3");
                shell.layout();
                shell.pack();
            }
        });
        Button shrink = new Button(shell, SWT.PUSH);
        shrink.setText("Shrink Button 3");
        shrink.addSelectionListener(new SelectionAdapter() {
            public void widgetSelected(SelectionEvent e) {
                button3.setText("Button 3");
                shell.layout();
                shell.pack();
            }
        });
        shell.pack();
        shell.open();
        while (!shell.isDisposed()) {
            if (!display.readAndDispatch())
                display.sleep();
        }
    }
}

If we run the test code, the window on the left appears. Pressing the Grow Button 3 button results in the window on the right. Resizing the window with the mouse will also make the buttons wider (or narrower) but they do not grow taller.

Understanding Layouts in SWT(from eclipse.org) Understanding Layouts in SWT(from eclipse.org)

Overriding Composite

If you are writing your own widget, as outlined in Creating Your Own Widgets Using SWT, and you subclass Composite, then here are a few points to consider for your implementation:

  • If you are providing trimmings in your new Composite, make sure to override both computeTrim() and getClientArea().
  • Never override layout(), but you may override layout(boolean).

Sometimes you want your new Composite to have a specific look, and you don‘t want the application to be able to specify a layout. Your new Composite would either do its layout in a resize handler or using a private custom layout. In either case, you will probably want to do the following:

  • Override setLayout() to do nothing.
  • Override layout(boolean) to call your layout code.
  • Override computeSize() to correctly compute the size of your Composite.

Summary

SWT provides several different ways to lay out widgets. The simplest method, and the one you will typically use, is to use one of the standard Layout classes: FillLayoutRowLayoutGridLayout or FormLayout.

In certain cases you may want to write your own Layout class to provide a very specific look or to reuse very similar layout code, but often a resize listener on the parent widget will suffice.

For further assistance in understanding the standard SWT Layout classes, see the SWT Snippets.

 

Understanding Layouts in SWT(from eclipse.org)

上一篇:十三 手游开发神器 cocos2d-x editor 之选关滑动界面(ScrollView)


下一篇:C#语音朗读文本 — TTS的实现